Hi guys,
as you know some days ago, Samsung has leaked their SGS2 ICS firmware, which I learnt on sammobile.com.
In their article, was a tutorial to install it, so I did.
I tried it a bit, but have been desapointed, so I decided to flash back to MIUI.
Thus I first flash another kernel, but here my trouble start.
Long story short, if I don't use the leaked, buggy firmware, I have a "Kernel panic - upload mode" and Kies does not recognize my phone to flash it back to stock.
I figured out that in the tutorial I have been told to change some file I've never flashed (like the pit, the modem and I think the CSC). Files that I don't know anything about. So I thought that those files weren't compatible with previous kernel etc. but as I don't know much, I can't be sure...
So I am know with a very buggy phone (for instance, I cannot be phoned, but I can phone to people) or a kernel panic. Help please :/
By the way, if someone could explain the meaning of those files, it would be cool, not to do the same mistake again.
And as I think : in all the tutorials using ODIN, it's said the I must not check "re-partition", what is it about ?
Thanks, and sorry for my poor English
Some updates here.
I thought yesterday, as there were those files (.pit, csc and stuff) in the downloaded archive on sammobile to flash leaked ICS, there were in the others firmware too, and I was right.
So this morning I flashed back to official 2.3.6 and it worked well. Then I flashed to xcell kernel (for Miui) and tried to flash MIUI 2.1.6. The kernel flash worked, as I rebooted normally but after flashing MIUI, another kernel panic :/
Did you wipe before flashing MIUI?
I did it after flashing, but still before rebooting.
Is that a mistake ?
If you wipe after flashing then your phone won't even boot.
So I think you did not wipe at all.
Yes I did, and I tried once again just now, wipping before flashing, but after the Samsung GS2 logo, still the kernel panic screen.
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Then read and learn before flashing anything else .
jje
Where can I find the correct stock firmware ?
I'm kinda lost with all the versions and stuff.
And when flashing, I would like to know what I do, but noone, nowhere, explains what we do, just "do that stuff and it will be good".
Swali said:
Where can I find the correct stock firmware ?
I'm kinda lost with all the versions and stuff.
You shouldd stop flashing and start READING THE BASICS you are flashing test roms from complete ignorance .
Stock firmware here you should know what your firmware is .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Ok, I admit it, I was dumb doing it :-/
So now I am under stock both kernel and rom (2.3.5) and Kies says that there is an update but my phone isn't ok to do it, but that is not what I want.
I wanted to reset my phone through Kies to be sure all would be set to stock, but now Kies doesn't let me do it, there is no option to do it.
I think that the rom, even if official, is not good for my phone.
On the topic you linked, I choosed XXKI4 (France, if I understood well) for the rom.
Kies says my version is "I9100XWKJ2/I9100XEFKJ1/I9100XXKI4/I9100XWKJ2".
And my phone says :
- Banseband : I9100XXKI4
- Kernel : 2.6.35.7-I9100XXKI4-CL611039 [email protected] #2
- Version number : GINGERBREAD.XWKJ2.
Is that all ok ?
What I would like to do is flashing MIUI 2.1.6, so is it good to do it now ?
Make sure you have flashed back the old bootloaders, see this post: http://forum.xda-developers.com/showpost.php?p=21146446&postcount=2
Ok so I flashed an old bootloader then a custom kernel and to finish the latest MIUI and everything went well !
Thank you, guys !
I recently just bricked my phone and I recovered following this " http://forum.xda-developers.com/showthread.php?t=1457458 "
but i bricked it again and this guide doesn't seem to help me and i need help fixing my phone again... i've tried almost everything i know of.. i looked up xda and can't find much about where im at...
i recently installed ICS stock firmware and installed dorimanx kernel rooted and CWM with speedmod and installed nightlykang's CM10... there were some bugs in the CM10 like i lost all my contacts no drop menu and such so i tried reflashing... after reflashing my phone just bricked.. so i tried flashing a stock firmware 4.0.4 ics i had and it failed... now i've been stuck in firmware upgrade encountered an issue please select recovery mode in kies and try again... i tried flashing a gingerbread and it didn't work... at 1 point my phone some how went into recover mode and i was able to get my phone working but it woudln't read my SIM card.. even though it was in, i took it out and plugged it back in and no luck... so i reflashed and back to the same stage... help please...!
Why have you got 3 threads about basically the same thing running concurrently.
Your time would be better spent reading the rules and searching........than spamming.
Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.
guys im having a problem with odin
i connect the s2 and want to flash stock 4.1.2 i9100XWLSD and put the phone in download mode ,, pda etc ( u know)
then i get this error in odin ,, and i have flashed this exact md5 on another s2 and it work
what should i do now ?
Keep trying. There's a bunch of troubleshooting steps to work through when an Odin flash fails. As you've managed to successfully flash onto another s2, you can probably eliminate a few of the possible causes. Search on here for the steps, I know I've posted them not too long ago, and MistahBungle has also posted them multiple times.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
wanna post what's the error that odin gives you?
Most likely misplaced files in Odin
IceCreamSandwhich ( LorD ClockaN ) S-OFF DHD
I just had the same problem. I flashed the CM resurrection version, worked then I wanted to try something else and the thing would just fail right in the same place it failed for you. I had Odin3_v3.04 and decided to try a different odin so i tried Odin3_v1.85
I see you are running odin3_v1.85 so I reckon you should just download any other version of odin and give it a go...
Hello everyone, First i have to say that i have done everything to my phone and i think i just hard brick it but i really need an Expert Opinion.
Right now i dont know what is the rom i am because everything i flash just fails.... i have trying with different Odin versions, different Roms, differents pc, differents cables, 3 files , 1 file, and i have flashed bootloader, different kernels, i have to say that i have trying everything, also i tried hg42 guide or the guide to flash an unflasheable soft brick phone.
Anyway as i say i think i just broke the logic board .
Ok Hope is the last thing you lost, so the last thing i did was flash a pit file that avoid the brick bug+ dorimax kernel by odin 1.85, in recovery i format everythihng and wipe everything and flash CM 10.1.3, but i dont know what happen with the phone , it just freezee in CWM or in language selection of the rom and after it freeze i have to remove the batery like 10 mins or sometimes 30 min to get the phone working again....
also i have to say that i cannot flash by odin a rom because it just get stuck in factoryfs.
thanks for reading i hope that you can help me out