i have been trying to fix my nook for a couple of days, and i have tried:
http://forum.xda-developers.com/showthread.php?t=1470910
and all i get is white lines on the top of the screen, and then it becomes black.
Thanks in advance
LeCommuniste said:
i have been trying to fix my nook for a couple of days, and i have tried:
http://forum.xda-developers.com/showthread.php?t=1470910
and all i get is white lines on the top of the screen, and then it becomes black.
Thanks in advance
Click to expand...
Click to collapse
One and only one thing comes to mind. You must continue to charge when you boot this even if your battery is 100%. Use power cord to turn on NT and keep it powered for the entire time. It (ubuntu) freaks without power and shuts down!
I hope this is your problem if not please tell more including which NT 8 or 16 gig, etc.
Good luck!
LeCommuniste said:
and all i get is white lines on the top of the screen, and then it becomes black.
Click to expand...
Click to collapse
um, i know you're all stressed out, we've all been there ( me too ), but the guy above me is right. . . plz give us more information. . if it won't boot internal, will it boot boot something up on the external sd card ?
at some point, my nook just didnt start up, it went into the "restart your nook" scree
it boots from sd. and after i installed cyanogenmod 9 again, it didnt boot into it
i tried something else and i got this:
booti: bad boot image magic (in memory)
are you a 8GB or a 16 GB unit ?
is it true you are installing cm9 internal ?
you try to fix and now the internal is corrupt ?
16, and i dont know what happend, the onlything i know is i tried to reinstall cm9 back on
LeCommuniste said:
at some point, my nook just didnt start up, it went into the "restart your nook" screen
Click to expand...
Click to collapse
ah, the the senior devs in the dev area who created this cm9 -- made it a 'Cinderella rom', ie. it flat quits working on purpose. . they did it because some evil guys were selling the alpha code as a finished product. . so all people who run the cm9 rom have to go back and install the next cm9 version from their post...
installed alpha 3. didnt do anything. still "please restart your device"
i wiped all of the data on every partion, then installed cyanogenmod 9
still does it
LeCommuniste said:
i wiped all of the data on every partion, then installed cyanogenmod 9
still does it
Click to expand...
Click to collapse
if ( and a very big "if", ie. do not assume ) your partitions are corrupt ( from a past step gone bad ) then you have to go thru the partition re-build step ( in the dev area ) . . but can you boot up in ubuntu and examine your partitions first - see what shape they're in ?
LeCommuniste said:
i wiped all of the data on every partion, then installed cyanogenmod 9
still does it
Click to expand...
Click to collapse
Sorry I missed the above post follow that and report back
erm. how do i do that?
and thanks for the patience, guys
Please Help
old_fart said:
if ( and a very big "if", ie. do not assume ) your partitions are corrupt ( from a past step gone bad ) then you have to go thru the partition re-build step ( in the dev area ) . . but can you boot up in ubuntu and examine your partitions first - see what shape they're in ?
Click to expand...
Click to collapse
OF if you can help this person then please do. I have had another stroke and am very scrambled. I tried to put it together several times but as you have seen I just can't finish what I started.
I had a friend send this message for me.
Thanks!
tobdaryl said:
OF if you can help this person then please do. I have had another stroke and am very scrambled. I tried to put it together several times but as you have seen I just can't finish what I started.
I had a friend send this message for me.
Thanks!
Click to expand...
Click to collapse
i do not have the experience to help with a corrupt partition. ( if it is a corrupt one ) . i have not had to fix / repair a corruption on my unit . . i was lucky that the adam outler restore ( http://forum.xda-developers.com/showthread.php?t=1470910 ) fixed mine and it went back to a factory boot-up . . my thought is that your NT is not corrupted because the boot is working . . the boot just fails to load the next piece . . ( i took some time and read over the 'partition repair' posts and they scared the hell out of me ! . http://forum.xda-developers.com/showthread.php?t=1605664&highlight=damaged+partition+table ) my advice is to not re-format. do not re-partition. the senior people see the new people dive into un-necessary ( wrong ) steps way too early / often. . the senior people say they see 'relatively easy' fixes turned into a mess. . http://forum.xda-developers.com/showthread.php?t=1635116
.
if the steps seem too much or are going nowhere... . do you have a large B&N store in your area ?
LeCommuniste said:
erm. how do i do that?
and thanks for the patience, guys
Click to expand...
Click to collapse
from notes – safe nt recovery with cm7 sdcard:
http://forum.xda-developers.com/showthread.php?t=1481826
make cm7 sdcard boot and setup.
install http://forum.xda-developers.com/showthread.php?t=1458630
Nook Recovery Flasher.apk
Run Nook Tab Recovery Flasher and select Install Stock Recovery, exit program.
Power off. Remove sdcard.
Press power and n key and hold 2 seconds after screen is lit. Release power.
After 1 second longer release n and you should get data reset. Press n key twice to accept.
If lucky your trouble will be cleared if not then hard reset.
Power off. Remove sdcard if installed. Hold power and n till screen lit and continue to hold till screen goes black. Do this eight times. Ninth time use power as normal and when you see recovery press n key twice to accept full factory reset.
Good Luck!
Related
Hey,
I have a huge problem, people.
I've had some issues with one of the ROMs that I tested, so decided to restore my Nandroid Backup. I've wiped everything and runned the Nandroid Restore of my previous - working ROM (EzHero 1.2.1) - everything looked as if it worked fine, the operation was completed succesfully. So, given that I've chosen reboot phone option in the Recovery (AmonRa 1.6.2) and it turned on with a regular booting screen and just stuck on it. It's been like 2hrs and I'm constantly stuck on this "loading" screen and cannot turn the mobile off either by holding Power or Power Home or Power Home Back. Nothing. I don't wanna take the battery out as I heard that it can be devastating.
So, to clarify all of that, I have a phone connected via cable (yet no connection through ADB) to PC, so the battery would not discharge and the phone itself is stuck on booting logo/animation, the one just before it goes into the usual desktop screen.
How can I go about it to restore it?
Thanks!
Do you have App2SD ?? If yes it may took ages to boot when you do a first boot... But that only works if you had done a Nandroid + Ext...
Its fine to take your battery out,... Reset and give it another try at booting. If it fails again, try booting without SD in. If it fails again, try doing another restore of your nandroid. Fail again,... Full wipe then reflash ROM.
There is only risk of bricking when flashing a new radio and interrupting the process.
sebxd said:
Do you have App2SD ?? If yes it may took ages to boot when you do a first boot... But that only works if you had done a Nandroid + Ext...
Click to expand...
Click to collapse
I do have apps2sd but haven't done +Ext.
When I soft-reseted the device it obviously went into boot loop again BUT I have managed to connect it to my PC through ADB now and wonder if I could use it to my advantage?
ddotpatel said:
Its fine to take your battery out,... Reset and give it another try at booting. If it fails again, try booting without SD in. If it fails again, try doing another restore of your nandroid. Fail again,... Full wipe then reflash ROM.
There is only risk of bricking when flashing a new radio and interrupting the process.
Click to expand...
Click to collapse
The problem is my phone IS stuck at boot loop and even if I soft reset it I don't have enough time to press POWER and HOME to go into Recovery so I cannot check if I could do restore. Would connection through ADB help as I currently after soft reset have it?
I have to clear something up my phone is in the boot loop but not as in that it reboots itself time after time - NO! It just sticks on the booting animation and that's it.
Oh, and running this "fastboot boot recovery-RA-hero-v1.6.2.img" through ADB just sits stuck at "< waiting for the device >" though I _can_ list the contents of my Hero through shell.
Also when I press vol up or vol down in the state with startup screen beeing stuck I can hear it same way as if I heard it in the working phone - as in beeping when pressing up and beeping lower when down.
I'm not so clued up on fastboot commands to be honest.
Take your battery out,... Hold HOME and put your battery back in..... KEEPING HOME HELD IN
OK! Finally after finding enough courage to do so I pulled the battery out as ddotpatel advised me to - I have to say it was scary 30s, real scary. Anyway, it seemed that his advice was correct and he is in fact a very wise man - THANK YOU! Afterwards I've done all the wipes again as I did initially and instead of trying to recover it from my Nandroid backup I just gave up and reflashed it again. It didn't work, so I reformated and repartitioned the SD card and it's all good now... And I'm a happy puppy! Actually, I'm no puppy at all but I am happy nonetheless.
@ddotpatel Thank you sir! You are a Gentleman and a Scholar and I shall praise your name forever on this and other Android forums alike. ^__^ Just a quick question though: removing a battery is prohibited only when flashing radio and when the phone's on the "phone & a box/arrow" picture, right? So if I ever have an booting/issue error whilst flashing custom ROMs that do nothing to the radio I should be fine poping the battery?
I know I sad it trice already but - ddotpatel, sir, THANK YOU!
kad3t said:
....Just a quick question though: removing a battery is prohibited only when flashing radio and when the phone's on the "phone & a box/arrow" picture, right? So if I ever have an booting/issue error whilst flashing custom ROMs that do nothing to the radio I should be fine poping the battery?...
Click to expand...
Click to collapse
Yes indeed, you are correct....
and as for all the praise,.... Oh stop it, your making me blush!
I'm Jealous I firstly tried to help you
ddotpatel said:
Yes indeed, you are correct....
and as for all the praise,.... Oh stop it, your making me blush!
Click to expand...
Click to collapse
I have to say I would not made the move if it was not for you though I did check few of your earlier posts and those made me follow your advice as you seem very knowledgeble. ^__^
sebxd said:
I'm Jealous I firstly tried to help you
Click to expand...
Click to collapse
Thank you too! I'm sorry but it was his advice that helped/pushed me in the right direction. However your try is also equally appreciated. ^__^
kad3t said:
I have to say I would not made the move if it was not for you though I did check few of your earlier posts and those made me follow your advice as you seem very knowledgeble. ^__^
Click to expand...
Click to collapse
Ah its no problem,... I honestly didn't know a single thing until I started lurking on here. Just keep your eyes open, try to read other peoples problems even if you don't know a solution yourself. There are alot of helpful guys and gals on here.
Pay it forward. Peace.
ddotpatel said:
Ah its no problem,... I honestly didn't know a single thing until I started lurking on here. Just keep your eyes open, try to read other peoples problems even if you don't know a solution yourself. There are alot of helpful guys and gals on here.
Pay it forward. Peace.
Click to expand...
Click to collapse
No worries, mate! My post count did not go up to 73 in like 5 days for no reason. I try to help as much as I can and also would not run into those problems if I wouldn't flash and benchmark many ROMs (posting all the stats for the same configurations & settings) here for others to decide on their own which they liked best either. ^__^
Peace!
Hi guys!
i just wanted to ask you a question: yesterday i tried to install the floyo rom but i guess something went wrong..after installing the rom via rom manager during the first boot the phone got stuck loading the new rom..it keeps showing "floyo" on the screen but nothing happens...it just keeps loading and loading and loading....is there any way i can boot the phone using the factory presets or something?
thx a lot
HI,
You're not in the right forum section to ask this, but anyway.
That problem could occur time to time, in fact, I had it several times. But don't need to worry, if you're phone is still booting, that's not a big problem then.
What you can do is reflash the rom like you did the first time.
But first, May I suggest you to check if you're phone is actually stock by using logcat ? Because the first boot can be quite long (in my case, it takes around 10~12 min). To do so, use your usb cable, go to command prompt and type
adb logcat
if there are things on the screen, and if that screen is moving, then just be patient...
LTourist said:
HI,
You're not in the right forum section to ask this, but anyway.
That problem could occur time to time, in fact, I had it several times. But don't need to worry, if you're phone is still booting, that's not a big problem then.
What you can do is reflash the rom like you did the first time.
But first, May I suggest you to check if you're phone is actually stock by using logcat ? Because the first boot can be quite long (in my case, it takes around 10~12 min). To do so, use your usb cable, go to command prompt and type
adb logcat
if there are things on the screen, and if that screen is moving, then just be patient...
Click to expand...
Click to collapse
ops!!! sorry about that!! what's the right section?
anyway....thx for your answer but i' ve been veeeeeeeery patient...i've waited for more than an hour but nothing happend
i'd like to reflash it but i don't how to do that since i cannot even access my home screen!! ah and if i connect the usb cable nothing happens..i just see this thing loading stuff.... bit frustrating
eyah78 said:
ops!!! sorry about that!! what's the right section?
anyway....thx for your answer but i' ve been veeeeeeeery patient...i've waited for more than an hour but nothing happend
i'd like to reflash it but i don't how to do that since i cannot even access my home screen!! ah and if i connect the usb cable nothing happens..i just see this thing loading stuff.... bit frustrating
Click to expand...
Click to collapse
OK. Open the back of your phone, remove the battery.
Replace the battery and you can try to boot your phone again.
Or you can directly boot into recovery. From this place you have choice to rewipe everything and reflash the rom. Or you can just load your nandroid backup; I assume you made one, did you?
boot your phone with the home button pressed(so press the home key, press hang up(so he will start) and after 10 seconds or so you're in the recovery menu
As above really..
Remove battery, then turn back on holding power and the home button.
This should bring you to the recovery ROM, in their, you can wipe your phone clean, and re flash a new ROM.
If you want to put a new ROM on your SD, you can mount the SD Via USB from the Recovery Menu, or just remove the SD and put in a card reader.
Then wipe/flash new ROM.
From your first post im guessing you tried to install Floyo? http://forum.xda-developers.com/showthread.php?t=784689&page=146 ?
eyah78 said:
Hi guys!
i just wanted to ask you a question: yesterday i tried to install the floyo rom but i guess something went wrong..after installing the rom via rom manager during the first boot the phone got stuck loading the new rom..it keeps showing "floyo" on the screen but nothing happens...it just keeps loading and loading and loading....is there any way i can boot the phone using the factory presets or something?
thx a lot
Click to expand...
Click to collapse
Just reflash the rom, but wipe everything..; then, Everything will be fine!
guys!! thk u all for your answers
all is fine now! removed battery reflashed original rom and then reflashed floyo...sweeeet ^_^
in case it didnt show that was my first attempt to install a custom rom and when the phone got stuck i kinda freaked out .....don't know what i did wrong the first time though.... anyway...thanks
hey,
prehisory:
last night, my phone were somewhere in my bed, cus i fell asleep. the wohle night i'm charging my phone always.
(happened a few times, but i think this time i slept over my phone)
next morning i woke up, picked up the phone & wanted to use it, but it got a freeze screen, was medium-temperatured (not more than a little gaming).
didn't thought anything bad, i pulled out my micro usb charger and forced a restart by contiounsly press power.
problem now:
it booted up as normal but it took really longer than usual. it seemed to freeze sometimes during boot, sometimes i canceled booting, and tried another time..
really really strange behaviors happened, but after a long time just let the phone boot, i got dropped to my homescreeen. all was looking good except the whole status bar just wasn't there. damn.. but ok, tried another 1-2 boots, to see if it get stable after a while but that doens't changed anything..
i can't eitgher get into CWM, just into download mode.
ideas?
i thought overheated but i guess that my phone either would'nt boot up (cpu burned) or stays at black screen (gpu burned)?
so i tried getting into CWM which doesn't worked. then i flashed official samsung ics via odin -> boots up till the coulorized "S" appears, stays in this state, and keep bootlooping (see this when the animation starts by this kind of flowers again)
tried another older stock rom, the same. stock kernel, the same, cf-root with CWM4, the same, i cant even then get in CWM..
any idea??
i'm goin crazy on this.. too much money wasted if this wont work -.-
...........
cabloomi said:
flash a rom like hydrog3n rom, it doesnt need you to fully wipe so most likely you wont get a boot loop, once youve tried that, post here and ill reply
Click to expand...
Click to collapse
Which part of "i can't eitgher get into CWM, just into download mode. " did you not understand?
OP:
Just flash a ICS rom for now and later you can try to see if it works or not. (CWM)
Have a good day.
Can you get stock recovery?
From Odin flash cwm, not the CFRoot one. than try it, strange you can get download mode but not recovery.
You have to wipe to get rid of boot loop
Sent from my GT-I9100
beston94 said:
Which part of "i can't eitgher get into CWM, just into download mode. " did you not understand?
OP:
Just flash a ICS rom for now and later you can try to see if it works or not. (CWM)
Have a good day.
Click to expand...
Click to collapse
Unfortunately the poster that replied never bothers to read the OP and just shoves out any old nonsense .
jje
so, finally i got it back,
did this howto: http://forum.xda-developers.com/showthread.php?t=1457458
so now i'm back on stock ICS samsungs rom.
flashed the suitable CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5.tar
but now i can't access the CWM menue, by pressing power, vol up, home
?
When you say you can't access recovery, what's happening?
PROBLEM SOLVED
YOU FORGOT TO USE THE HOME KEY
1. Put 1 finger on home
2. Put 1 finger on volume up
3. Put 1 finger on top of power
4. Press them all together, and as soon as you see the anything on the screen, let go of everything
>>>>next time try to look up a guide on how to get into cwm recovery<<<<
cabloomi said:
PROBLEM SOLVED
YOU FORGOT TO USE THE HOME KEY
1. Put 1 finger on home
2. Put 1 finger on volume up
3. Put 1 finger on top of power
4. Press them all together, and as soon as you see the anything on the screen, let go of everything
>>>>next time try to look up a guide on how to get into cwm recovery<<<<
Click to expand...
Click to collapse
i did, it doesnt accessed cwm. never mind tryin around solved it.
now all fresh installed off samsungs official, but it isnt as good as before:
still slow bootup, and my status-bar is missing after booting (using latest miui which i also had before this problem, so formerly it was working)
after bootup, touch keys and all other won't response, so if bootup to lockscreen -> wait til screen goes off -> u cant wake the phone, or u have to wait a while maybe it light up for some reason.
any ideas?
hardware damage? i hope not..
no i think you need a good wipeing. but you need to find a way to get into download mode, dont give up try it 3 more time's, dont keep pressing the after the buttons logo apears
try this or its hardware............ you do any deviation and you are on your own.
remove your external sdcard and dont put it back until you are sure your phone works
as per your above post you can access cwm
1: format data / cache / system / sdcard or emmc [system is a must]
2: format preboot / boot [cwm 5.5 or some alternat if option available]
3: download stock i9100 ROM from checkfus (prefer) or sammobile
4: flash using odin, after first boot dial *2767*3855#
5: do not sign in, use for half hour or so, if you think it works sign in to google.
6: do not restore any thing, no titanium backups/restores
7: do not put your sdcard
if your phone works now you know its not hardware now do whatever
thanks mate you strength my opinion and hope that it isn't hardware.
i already had an stock ICS samsung rom on it, with sd mounted all worked fluently and well. (LPH rom). so i flashed a suitable CF-root with CWM, get in there, flashed custom ROM (latest miui + siyah kernel, the same combination i used for month and it worked).
so but what causes these problems i have? before it was fast booting and stable, now slow and the status bar is missing, the rom wont boot up in a normal way, i have to "bully" my phone while boot that i can see the desktop..
?
And your problem suddenly changed!
Custom ROM issues, download again, download something else, wipe, flash again.
Sent from my GT-I9100
atifsh said:
And your problem suddenly changed!
Custom ROM issues, download again, download something else, wipe, flash again.
Sent from my GT-I9100
Click to expand...
Click to collapse
yes it seemed like that, but i cant understand why it happened over night? i didnt used the phone and whoos! i woke up and all's screwed up? <,< d**m
Next time be clear, no problem on stock means, no problem but user problem.
Sent from my GT-I9100
atifsh said:
Next time be clear, no problem on stock means, no problem but user problem.
Sent from my GT-I9100
Click to expand...
Click to collapse
it changed, as i wrote before.
btt any ideas?
My NT used to work beautifully. It was rooted and was a great device. Then it started to randomly shutdown.
Now, after factory resets and just about everything else imaginable, it boots normally, gets to the woman on the video screen, then just shuts off. If I hold the power button only, it stays on but only for a few seconds as the power button, oddly enough keeping it on, shuts it down.
Also, the only way it turns on is to connect to PC via USB. Power button will not turn it on unless connected.
Any one have ANY ideas what could be the issue?
Thanks a ton!
HW
Try Formating your external sdcard if any, make a wipe data factory reset. Leave it on CWM then Put it to charge full with original charger and USB cable. Leave it for 3-4 hours. After that unplug from power, reboot device in CWM and report back
~ V
Sent from my Cappy powered with Jelly Bean using Tapatalk 2
lavero.burgos said:
Try Formating your external sdcard if any, make a wipe data factory reset. Leave it on CWM then Put it to charge full with original charger and USB cable. Leave it for 3-4 hours. After that unplug from power, reboot device in CWM and report back
~ V
Sent from my Cappy powered with Jelly Bean using Tapatalk 2
Click to expand...
Click to collapse
Thanks. The problem is, when I boot to CWM, it flickers and will only stabilize by holding the power button in. I've tried several cards with fresh CWM and it always flickers and is nearly impossible to make a selection.
HarryWanger said:
Thanks. The problem is, when I boot to CWM, it flickers and will only stabilize by holding the power button in. I've tried several cards with fresh CWM and it always flickers and is nearly impossible to make a selection.
Click to expand...
Click to collapse
Hmmm that's odd. What model is your nook tablet 8 or 16 GB?
Sent from my Cappy powered with Jelly Bean using Tapatalk 2
lavero.burgos said:
Hmmm that's odd. What model is your nook tablet 8 or 16 GB?
Sent from my Cappy powered with Jelly Bean using Tapatalk 2
Click to expand...
Click to collapse
It's a 16GB model purchased 12/25/11. I've tried everything and have no idea what it could be. The CWM issue is really odd too. It's just a very fast flicker that won't let me select anything unless the power button is held down which then defeats the purpose since it'll shut down.
Also, if I ever am able to get it to do a data wipe through the flickering, I get a message as it goes through that states, "E:format_volume: make_ext4fs failed on /dev/block/mmcblk1p2"
Then it says "Data wipe complete" while still flickering and continues to do the same on any restart
HarryWanger said:
It's a 16GB model purchased 12/25/11. I've tried everything and have no idea what it could be. The CWM issue is really odd too. It's just a very fast flicker that won't let me select anything unless the power button is held down which then defeats the purpose since it'll shut down.
Also, if I ever am able to get it to do a data wipe through the flickering, I get a message as it goes through that states, "E:format_volume: make_ext4fs failed on /dev/block/mmcblk1p2"
Then it says "Data wipe complete" while still flickering and continues to do the same on any restart
Click to expand...
Click to collapse
Ok, tell me if at list when you boot into CWM (internal or sdcard) your device remains on and doesn't shutdown after few minutes. This is important in order to perform unbrick methods. Also let me know what unbrick method(s) have you tried so far, if any.
~ Veronica
lavero.burgos said:
Ok, tell me if at list when you boot into CWM (internal or sdcard) your device remains on and doesn't shutdown after few minutes. This is important in order to perform unbrick methods. Also let me know what unbrick method(s) have you tried so far, if any.
~ Veronica
Click to expand...
Click to collapse
When I boot into CWM it will remain on the CWM screen flickering forever until I shut it down.
I have tried everything on the forum to unbrick, including the ubuntu method several time. The only one I haven't been able to try is the internal partition restore since the files don't exist any longer to try that method.
Hope this info leads to something. Thank you for your help. I've spent endless hours on this and am now just trying to get it working again to donate it to a charity in a working condition. I have a new Nexus 7 which blows this away regardless but would like to donate a functioning tablet to a kid who would really appreciate it.
HarryWanger said:
When I boot into CWM it will remain on the CWM screen flickering forever until I shut it down.
I have tried everything on the forum to unbrick, including the ubuntu method several time. The only one I haven't been able to try is the internal partition restore since the files don't exist any longer to try that method.
Hope this info leads to something. Thank you for your help. I've spent endless hours on this and am now just trying to get it working again to donate it to a charity in a working condition. I have a new Nexus 7 which blows this away regardless but would like to donate a functioning tablet to a kid who would really appreciate it.
Click to expand...
Click to collapse
OK i think the unbrick method you're referring is @soshite's thread? that is the one i was going to suggest you, so what you need to follow that tutorial is meghd00t's cwm recovery sdcard which you can find here (it already have the gdisk and sgdisk built in), the scripts.zip (not sure if those scripts are built in the cwm sdcard aswell) and the 16gb partition images.
All the tools mentioned above and more can be found in my FTP Nook Tablet folder so i recommend you to bookmark it.
~ Veronica
lavero.burgos said:
OK i think the unbrick method you're referring is @soshite's thread? that is the one i was going to suggest you, so what you need to follow that tutorial is meghd00t's cwm recovery sdcard which you can find here (it already have the gdisk and sgdisk built in), the scripts.zip (not sure if those scripts are built in the cwm sdcard aswell) and the 16gb partition images.
All the tools mentioned above and more can be found in my FTP Nook Tablet folder so i recommend you to bookmark it.
~ Veronica
Click to expand...
Click to collapse
Thanks. I will try this and report back.
HarryWanger said:
Thanks. I will try this and report back.
Click to expand...
Click to collapse
No luck. The instructions make no sense. How can I get "to a terminal" when the NT turns off so quickly.
I'm afraid this it fried.
Frustrating since it boots to the stock woman in the video and just quits.
Maybe someone else wants to take a shot.
Make me an offer for this POS. My goal was to donate it to a children's charity here but it's useless in this state its in. Anyone want it?
Let me know. I have no more time to mess around with something that's about a year behind the latest technology now.
Thanks for all your help everyone but it's time to let this go.
Hi,
Yesterday my phone was working fine, today ... It bootloop after 5seconds, even if i start it in download mode, i feel like the "Start" button is stuck, but i prefer to ask first. i tried to get a log from adb logcat, but the phone isn't recognised in 5sec so i have nothing.
EDIT: The phone is comming back from support because of the motherboard "suddent death", they replaced it with a same new one.
Known problem ? Any idea ? :x
Firmware version ????
Read the sudden death syndrome post in general .
recovery ???
jje
JJEgan said:
Firmware version ????
Read the sudden death syndrome post in general .
recovery ???
jje
Click to expand...
Click to collapse
Thanks for the answer
As it reboot after 5second i can't even go in recovery mode,
I don't remember the firmware version, but it's the stock one.
I'm gonna read (again) the post about sudden death
seems like the power button is stuck.
Glebun said:
seems like the power button is stuck.
Click to expand...
Click to collapse
Yea that's what i thought, but i really don't know how to open the phone, any tip ? link ?
Minoui said:
Yea that's what i thought, but i really don't know how to open the phone, any tip ? link ?
Click to expand...
Click to collapse
I add that it also could be this:
rootSU said:
2) Half SDS as it has not-so-affectionately become known. This tends to be more of a boot loop of the Samsung boot splash. the eMMC is partially wiped out. You cannot boot into android or recovery. It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.
One problem Half SDS has is that the information download mode uses to show the status as "Official" appears to be wiped out by the bug, leaving your status as "Custom". This can leave you in a precarious position as this is what Samsung uses to establish warranty validity. You may also see your product field is blank.
Please help me maintain this list by identifying fixes as and when released, Please post the Link and Version number of anything with this fix implemented
Click to expand...
Click to collapse
But i can't really go into download mode so ... i still think it's simply the button wich is stuck :x
LAST EDIT:
Ok, so after 10min connected to usb (and looping) it suddently ... stopped to loop... and just i started it normaly ...
but
exactly now, when i'm writing this, the phone just restarted and went back to 'loopboot' mode
BUT
when i'm about to send the message ... it stoped to loop and i'm starting it normaly ... >_<
Ok, now 10 minutes it started normaly, 98% percent charge.
No sim inserted,no SD card, if i try to open the parameters, it open for 1/2 second then close and send me back to main menu.
Every other app seems to work normaly. (Text, internet, file explorer).
I'm going to wait a bit more then try to insert SIM and SD and reboot.
EDIT: Trying to open any "Parameter" related thing bring me back to main menu (as "Connected as" or long press the Wi-Fi etc ...).
I can activate wifi and it works ... it seems it's only the GUI xD (Maybe it's normal while not having SIM card, i never tried to run my phone without one :x )
definitely hardware buttons issue.
Ok, so after this it worked like a charm for few days, and now, bootloop again \o/
It seems to happend when the phone is down because of low batery :/
I opened it, and removed the "power" button ... still the same. it seems it's not comming from there :/
Any idea ? :x
3h it bootloops
Any idea please ?
The phone is comming back from support
Return faulty repair
jje
JJEgan said:
The phone is comming back from support
Return faulty repair
jje
Click to expand...
Click to collapse
Ok, thank you, any way the see the phone is rooted ? :x
Minoui said:
Ok, thank you, any way the seey the phone is rooted ? :x
Click to expand...
Click to collapse
Yes see the return to stock for warranty post.
jje