Hi folks, I have a very serious problem.
The camera gives FC always put any rom, any kernel, any wipe to do.
I have CM9. Everything worked fine, even the camera.
But a couple of days gave me the camera FC (and any camera application).
I wipe, and continued to give FC. I put the last nightly with wipes, and FC. I put the siyah. And did not work. I thought it maybe it was something rare CM9. So I went back to put the officer with wipes. Wrong. I put the siyah to see if the kernel improves somewhat, and there is no way.
Someone has thought the same thing? or know how to fix it?
Thanks in advance
Return to stock return for waranty or try the camera firmware fix post .
jje
JJEgan said:
Return to stock return for waranty or try the camera firmware fix post .
jje
Click to expand...
Click to collapse
The stock does not work either.
Where is the camera firmware fix post please??
ruben_limit said:
The stock does not work either.
Where is the camera firmware fix post please??
Click to expand...
Click to collapse
on xda same place as always general section .
jje
JJEgan said:
on xda same place as always general section .
jje
Click to expand...
Click to collapse
Thanks.
If I try to update, says I have the latest version.
If I go to the menu of camera firmware standard:
- Phone / cam FW View Check> Cam Fw see: FAILED. Phone Fw see: TBEC28
- Phone Write to CAM Fw> Invalid version. Cam Fw see: FAILED. Phone Fw see: TBEC28
ruben_limit said:
Thanks.
If I try to update, says I have the latest version.
If I go to the menu of camera firmware standard:
- Phone / cam FW View Check> Cam Fw see: FAILED. Phone Fw see: TBEC28
- Phone Write to CAM Fw> Invalid version. Cam Fw see: FAILED. Phone Fw see: TBEC28
Click to expand...
Click to collapse
UP
Help please!
ruben_limit said:
Help please!
Click to expand...
Click to collapse
1) delete you DCIM folder after backing up to PC, and try...or if you have no PC access now, just rename the folder to DCIM-2 and reboot
2) USE an alternative Camera from Market "Camera ICS" the best I have ever seen, better quality than stock ICS camera...
ZACQ8 said:
1) delete you DCIM folder after backing up to PC, and try...or if you have no PC access now, just rename the folder to DCIM-2 and reboot
2) USE an alternative Camera from Market "Camera ICS" the best I have ever seen, better quality than stock ICS camera...
Click to expand...
Click to collapse
Thank you. but any application that uses the camera returns FC.
I've deleted the DCIM folder and not a result.
Thanks anyway.
I think hardware issue....better return to the dealer for repair as JJE told, flash stock if waranty still valid..
I can´t download a firm camera, put into sd card, and rewrite mi fw camera??
ruben_limit said:
I can´t download a firm camera, put into sd card, and rewrite mi fw camera??
Click to expand...
Click to collapse
if somebody provides in CWM flashable ZIP format you have to flash it from CWM, if it is apk you have to install it...
but you have already flashed many ROMs with different camera apps, with no result???
have you tried what I suggested "Camera ICS" download it from play store.
Yes, I flash many roms, making wipes, CM9, ginger stock, stock ICS ... and does not fix the problem.
I've tried many camera apps (even with "Camera ICS" you name it), and this does not work.
ruben_limit said:
Yes, I flash many roms, making wipes, CM9, ginger stock, stock ICS ... and does not fix the problem.
I've tried many camera apps (even with "Camera ICS" you name it), and this does not work.
Click to expand...
Click to collapse
I have this problem too....
I'm from Belarus and sorry for bad English
When I go to service (in my Country not official) then tell me about in my phone bad block's in flash memmory. But they flash him by JTag in 2.3.3 firmware. Camera work 2 days... After I'm installing many app's and trouble receive((((
Now I flash stock Firmware and my camera FC(((
Try flash 2.3 Gingerberd?
Related
[Q] I really need some expert help on this guys!
<b>2012-03-23 updates on what further tests I've done:</b>
I've just flashed MT15i-Global.tft using latest flashtool in flashmode.
= did not work
Then tried wotanclient = did not work
Made fresh install of ICS beta(2different roms) = did not work
Please help me get my front cam working !
A few months ago the front Camera worked on my Neo but not anymore.
I cant really say if it just stopped working or had something to with flash of another rom.
I've rooted and flashed a number of phones before so i have some basics in this..
Currently running ICS on my Neo.
What I've tried to do to fix it.
1. Use SEUS but it said I have a modified android version and would let me restore...
2. WotanClient which restored it to .62 2.3.4. Failed at first attempt but succeeded at 2nd. >> front cam didnt work afterwards.
3. Tried other ICS roms and made several attempts.
The steps i took on installing another rom:
- installed fastboot
- connected phone
- run fastboot flash boot xxxx.img
- go into recovery
- wipe all, wipe cache, format system, dalvik and battery stats
- install xxx.zip
- up and running with non working front cam
Questions!:
1. How can I make a TOTAL restore of both bootloader, kernel, rom and everything to the stock firmware it got shipped with????? A step by step would be appreciated!
2. Any steps that I could have missed??
3. Anyone with similar problems?
4. How can I put it back to 100% stockrom to get warranty back and perhaps send on service?
FYI
The back camera also behaves strange on the ICS rom in skype/tango video call. It is miscolored.. On 2.3.4 it was ok.
Weird. Could this all be a firmware issue?
Can some provide all the tools i need to get it working? Or can I extract some logs or something that would help you find out if the front cam really is broken??
Where can I test the front cam or are there any appa to specifically test it in any way??
Desperate regards !
F on my mobile
Sounds like you have flashed a arc Rom
Or messed with android from facing camera.xml
Sent from my MT15i using Tapatalk 2 Beta-2
If you're still on ICS, try to flash the camera fix zip again. http://forum.xda-developers.com/showthread.php?t=1514172
kormatoes said:
Sounds like you have flashed a arc Rom
Or messed with android from facing camera.xml
Sent from my MT15i using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Im pretty sure it was a neo rom, it was picked from neos forum anyway.
Nope, havent messed with it at any point nor any other file.
sdk16420 said:
If you're still on ICS, try to flash the camera fix zip again. http://forum.xda-developers.com/showthread.php?t=1514172
Click to expand...
Click to collapse
Ill give it a shot but i dont think it will help as after WotanClient and back to android 2.3.4 it wasnt working either.
nfreddi said:
Im pretty sure it was a neo rom, it was picked from neos forum anyway.
Nope, havent messed with it at any point nor any other file.
Click to expand...
Click to collapse
That's my point not many ics Rom actually come from neo all arc and neo v flash the patch above bro let us know
Sent from my MT15i using Tapatalk 2 Beta-2
Other suggestions or thoughts?
nfreddi said:
Other suggestions or thoughts?
Click to expand...
Click to collapse
If it doesn't work after flashing official 2.3.4 firmware in flashtool with a full wipe, I'm out of ideas.
Does flashing with wotanclient really flash Everything?? Kernel, loader rom and wipes everything?? If the phone hasnt got a hardware fault something, it must be some step i did that sctewed something up.. Could try wotan again though but would rather have more people look into this before strarting flashing.
Afaik Wotan flashes / wipes everything and gets you back to clean Stock!
BUT, i already got problems wotan flashing / discovering the wrong phone type.
While i was trying out some different Kernels on my Phone (Mt11i SE NEO V), it seems that i picked a wrong Kernel and my Phone was showing me the Model Mt15i (SE NEO).
And even Wotanclient discovered a Mt15i...
Didn´t try the front camera at this point, but back cam was not working.
I tried to manually flash Mt11i Stock Rom/ Kernel (0.62) using flashtool.
Well flashtool did it´s work not completely, but far enough to reset the Model to Mt11i and Wotan flashed the correct Version afterwards.
My Hint, have a look at the Modellnumber in Settings, is it the right one ?
sdk16420 said:
If you're still on ICS, try to flash the camera fix zip again. http://forum.xda-developers.com/showthread.php?t=1514172
Click to expand...
Click to collapse
Just tried the Camera fix. Cant find anywhere to switch to front cam. Didnt help...
leine0104 said:
Afaik Wotan flashes / wipes everything and gets you back to clean Stock!
BUT, i already got problems wotan flashing / discovering the wrong phone type.
While i was trying out some different Kernels on my Phone (Mt11i SE NEO V), it seems that i picked a wrong Kernel and my Phone was showing me the Model Mt15i (SE NEO).
And even Wotanclient discovered a Mt15i...
Didn´t try the front camera at this point, but back cam was not working.
I tried to manually flash Mt11i Stock Rom/ Kernel (0.62) using flashtool.
Well flashtool did it´s work not completely, but far enough to reset the Model to Mt11i and Wotan flashed the correct Version afterwards.
My Hint, have a look at the Modellnumber in Settings, is it the right one ?
Click to expand...
Click to collapse
It is MT15i according to system information.
After a few more replies or tips here ill try to reset with flashtool / wotan.
Hi, I am facing the same front camera issue after upgrading to ICS.. No on seems to be able to sort this out..
and1only said:
Hi, I am facing the same front camera issue after upgrading to ICS.. No on seems to be able to sort this out..
Click to expand...
Click to collapse
Hi, What have you tried?
It feels like I've tried everything.. I can't just have bricked my phone? =)
Do you know if it's possible to Re-Lock the phone to be able to send it on SE service repair???
WE REALLY NEED SOMEONE TO HELP US OUT ON THIS! "shouting"
I disassemble and assemble the phone flex and it worked http://forum.xda-developers.com/images/icons/icon7.gif
im also facing the same issue..but on the neo v though
the issue persisted before i rooted my phone and after i switched to the stock ics from gingerbread
now im using cm9 and the face unlock feature doesnt work
still havent got the issue sorted
front camera solution
Hello and sorry for continuing this thread, but i have a query about the front camera of xperia neo v.
As all the above, I have the same problem with my front camera and I was wondering if I could somehow get the camera's apk file from gingerbread (the whole camera application - which is believed to be the last application compatible with the camera),would this solve the problem?
I am addressing aspecially to the developers .....
If anybody knows a way to solve this, please send me inbox a guideline.
Thanks in advance.
:good:
May be below the info can help you about the stock rom flash
1. Find the bootloader locker ftf (firmware file) file for Neo from the Internet (else inbox me I will find and will give you. I have that file but it's Neo V only). Once you flashed this file then Sony updater service will reconognize your device and do the update properly
2. Install Sony updater service
3. Connect your phone and choose the phone model then update to ICS
Hit thanks if it helped
Sent from my Xperia Neo V using xda app-developers app
I always use AOKP roms on my devices and since I have the i9300 I start to get "Can't connect to the camera" occasionally when I open the camera app. I have to restart the device to use the camera (or the torch) again.
I suppose it was a rom related problem, but while upgrading from 4.1.2 to 4.2.1 (so new camera app) I saw the problem remain identical and I start investigate.
The problem is on the camera firmware, that is not placed on the filesystem, so it didn't changes between flashes.
EDIT: the problem is not completely solved, but is seems less frequent than before...
The only way to change it seems to flash a samsung stock rom (or a based one) and follow this steps:
dial *#34971539# in stock dialer
check your camera vendor using "Phone/CAM FW Ver Check" (the first two letter of "Cam FW Ver")
if you have a ZD* firmware download this file: View attachment ZDFF03.zip (thanks to GrayJack)
if you don't have a ZD* firmware you have to try yourself downloading from here or here (please report your results and I will update this post)
unzip the file SlimISP.bin in the root of your internal memory
dial *#34971539# again
upgrade yur camera fw using "Phone to CAM FW Write (Rear)"
restore your favorite rom
optional: press thanks/donate button :good:
Here's my tests on ZD camera + 4.2.1 AOKP
ZDFE02: frequent "Can't connect to the camera"
ZDFF03: good
ZDFI02: this is the most recent, but camera force closes
Hi,
i'm having the same issue, and I made a topic about it
http://forum.xda-developers.com/showthread.php?p=37325700#post37325700
Any idea of what I'm doing wrong? I followed your instructions, but the FW write button stays disabled?
you have a ZH* firmware? which file you try to use?
the one attached in my post is for ZD* cameras and in the GrayJack/4PDA threads there is no trace of this vendor.
maybe there's a compatibilty check that keep the flash butto disabled and maybe you have a new hardware that didn't have an older firmware to flash?
It Works!
Heya, just wanted to let you know that this FW really fixed the camera issues on my S3.
I was running ZDFE02 and after updating to ZDFF03 all problems were gone.
Running CM10.1 now with Camera 4.2 and Photo Sphere.
Thank you for your great work!
c3k said:
I always use AOKP roms on my devices and since I have the i9300 I start to get "Can't connect to the camera" occasionally when I open the camera app. I have to restart the device to use the camera (or the torch again).
I suppose it was a rom related problem, but while upgrading from 4.1.2 to 4.2.1 (so new camera app) I saw the problem remain identical and I start investigate.
The problem is on the camera firmware, that is not placed on the filesystem, so it didn't changes between flashes.
The only way to change it seems to flash a samsung stock rom (or a based one) and follow this steps:
dial *#34971539# in stock dialer
check your camera vendor using "Phone/CAM FW Ver Check" (the first two letter of "Cam FW Ver")
if you have a ZD* firmware download this file: View attachment 1669083 (thanks to GrayJack)
if you don't have a ZD* firmware you have to try yourself downloading from here (please report your results and I will update this post)
unzip the file SlimISP.bin in the root of your internal memory
dial *#34971539# again
upgrade yur camera fw using "Phone to CAM FW Write (Rear)"
restore your favorite rom
optional: press thanks/donate button :good:
Here's my tests on ZD camera + 4.2.1 AOKP
ZDFE02: "Can't connect to the camera"
ZDFF03: perfect (until now)
ZDFI02: this is the most recent, but camera force closes
Click to expand...
Click to collapse
Hi,
my problem is that I flashed the stock rom ( as you mentioned) an I´m not able to start the check because, after dailed *#34971539# the check don´t start and after 3-4 Second check stopt....
The camera doesn´t work with no ROM....
Do you have any Idea what to do?
have you flash through odin?
is it the latest available version at samfirmware?
c3k said:
have you flash through odin?
is it the latest available version at samfirmware?
Click to expand...
Click to collapse
I going to try again I hope this is the right one: Germany 2012 December 4.1.2 I9300XXELL4 I9300DBTELL1
It doesn´t work with my GS3. I flashed the stock with odin and the camera isn´t working. I can not manage to go to service. after taking *#34971539# I get: "Camera firmware standard" on the top of the screen and then "Factory Test stopt"....
Any help out there......
slyk2203 said:
Hi,
my problem is that I flashed the stock rom ( as you mentioned) an I´m not able to start the check because, after dailed *#34971539# the check don´t start and after 3-4 Second check stopt....
The camera doesn´t work with no ROM....
Do you have any Idea what to do?
Click to expand...
Click to collapse
same here...:crying:
Re: [SOLVED] "Can't connect to the camera" on CM/AOKP roms
When you say that with the FW trick the camera works perfect, does it include touch to focus with flash enabled?
Sent from my GT-I9300 using Tapatalk 2
hi there,
first a big thx for you @c3k for finding the time to investigate the issue for all the no SAMMY roms which the cam is most likely the only disadvantage over the SAMMY firmware !
i've flashed stock rom dialed the no. and got an earlier cam+phone firmware GDFE02 on both cam+phone FW, i've applied the update at the thread you linked to and now i'm running both phone and cam FW with: ZDFF03.
i've restored my jellybam nand but unfortunately the issue persists "as usual".
i tried to clear data and dalvik cache+fix the permissions and clear the gallery(aka camera app) data as well.
after rebooting i'm still getting the problem.
i guess it the fix doesn't work at every phone for some reason(i have the i9300 off course).
if anyone have any suggestions i'd love to hear
cheers
i try to dial *#34971539# in stock dialer but my GS3 return nothing.
Any ideas?
slyk2203 said:
It doesn´t work with my GS3. I flashed the stock with odin and the camera isn´t working. I can not manage to go to service. after taking *#34971539# I get: "Camera firmware standard" on the top of the screen and then "Factory Test stopt"....
Any help out there......
Click to expand...
Click to collapse
niaze_farda said:
same here...:crying:
Click to expand...
Click to collapse
I think samsung may have changed the S3 camera in lastest hw versions, and maybe it has no more an upgradable firmware.
If this is correct the only way is work on the aosp source to have a better comunication with this new hardware, but I don't know how hard it is, if is possible and how many i9300 camera vendor / version exists,,,
When and where you buy your device? (is it i9300, right?)
lluis.lsm said:
When you say that with the FW trick the camera works perfect, does it include touch to focus with flash enabled?
Click to expand...
Click to collapse
Not sure what you're talking about, but I've just take some photo on low lights / touch to focus with flash enabled whitout problems.
eytan123 said:
hi there,
first a big thx for you @c3k for finding the time to investigate the issue for all the no SAMMY roms which the cam is most likely the only disadvantage over the SAMMY firmware !
i've flashed stock rom dialed the no. and got an earlier cam+phone firmware GDFE02 on both cam+phone FW, i've applied the update at the thread you linked to and now i'm running both phone and cam FW with: ZDFF03.
i've restored my jellybam nand but unfortunately the issue persists "as usual".
i tried to clear data and dalvik cache+fix the permissions and clear the gallery(aka camera app) data as well.
after rebooting i'm still getting the problem.
i guess it the fix doesn't work at every phone for some reason(i have the i9300 off course).
if anyone have any suggestions i'd love to hear
cheers
Click to expand...
Click to collapse
if you had a GD* firmware, you need to use a GD* update.
strange your camera still works...
read again my post and try the ZD* fw from the linked post
vitormateus said:
i try to dial *#34971539# in stock dialer but my GS3 return nothing.
Any ideas?
Click to expand...
Click to collapse
Try most recent rom, same slyk2203's hardware?
c3k said:
I think samsung may have changed the S3 camera in lastest hw versions, and maybe it has no more an upgradable firmware.
If this is correct the only way is work on the aosp source to have a better comunication with this new hardware, but I don't know how hard it is, if is possible and how many i9300 camera vendor / version exists,,,
When and where you buy your device? (is it i9300, right?)
Not sure what you're talking about, but I've just take some photo on low lights / touch to focus with flash enabled whitout problems.
if you had a GD* firmware, you need to use a GD* update.
strange your camera still works...
read again my post and try the ZD* fw from the linked post
Try most recent rom, same slyk2203's hardware?
Click to expand...
Click to collapse
This seems to be a f.... Nightmare... A smartphone with quadcore without camera.... I bought it 7 days ago...
I tried today the latest stock rom jb from febr. 2013 and the cam doesnot work....
Is there a chance to delete the whole system and make a newstart ?
I have the first backup after the phone was routed...
This was my problem in the past too, so didn't go for AOKP it still has issues atm. back then i just flash other rom do full wipe and camera works again. flashed dav cache and format system?
lyxtian said:
This was my problem in the past too, so didn't go for AOKP it still has issues atm. back then i just flash other rom do full wipe and camera works again. flashed dav cache and format system?
Click to expand...
Click to collapse
Could you explain step by step.
Which rom are you using now?
Thanks
Can someone help to fix the camera on my galaxy s3?
Same problem here
I'm glad I'm not the only one having this problem.
This camera issue happens on every ROM I flash with the exception of the Stock ROMs.
I am now re-flashing my AOKP 4.2.1 ROM that I had running a little while ago. It seems the problem is with every ROM but the stock ones, which is a shame considering I'm not the biggest touchwiz fan and I love AOKP.
So does anyone know of any fix? the error only happens when I take a picture. I really dont know what to do. I am open to any suggestions.
Thanks, as always.
joshuagalipeau said:
I'm glad I'm not the only one having this problem.
This camera issue happens on every ROM I flash with the exception of the Stock ROMs.
I am now re-flashing my AOKP 4.2.1 ROM that I had running a little while ago. It seems the problem is with every ROM but the stock ones, which is a shame considering I'm not the biggest touchwiz fan and I love AOKP.
So does anyone know of any fix? the error only happens when I take a picture. I really dont know what to do. I am open to any suggestions.
Thanks, as always.
Click to expand...
Click to collapse
On my galaxy s3 the camera does not work on stock too...:crying: it seems to be totaly broken.....:crying: I can not take pictures of my son he is 17 months old tomorrow....
Damn, that sucks
slyk2203 said:
On my galaxy s3 the camera does not work on stock too...:crying: it seems to be totaly broken.....:crying: I can not take pictures of my son he is 17 months old tomorrow....
Click to expand...
Click to collapse
jeez, I'm really sorry! I would help you if I could but I'm not sure how much i could do!
have you tried any camera apps?
or try this!!!!
search "4.2 camera" on google and find the androidpolice one, download and flash!
Works perfectly for me, plus you get photosphere!
I just can't get the camera working on 4.2 :crying::crying::crying::crying:
hope it helps!!
Hi,
I dont think I ever posted here, but I'm mostly active on the CM forum, but I did not get any response on the problem I'm having now.
I used to have the Samsung Galaxy S i9000, with CM flashed on it.
I now got the Samsung Galaxy SIII, and I immediately rooted it. I then installed CM9, but my camera wouldn't work. It opens, waits for 2-3 seconds and then gives me the "can't connect to camera" error, and closes.
I then tried flashing some other roms like AOKP, Liquid, EnergyHD, ... even with 4.2.1 based Nexus200 rom, the camera won't work.
Appearantly I'm not the only one having this issue.I searched the forum and found to links:
http://forum.xda-developers.com/showthread.php?p=37072484#post37072484
- When trying this method, I found the fw version of my camera:
Cam FW ver: ZHFJ02
Phone FW ver: ZHFJ02
- When I try to follow the instructions from the link above, I get stuck on the FW write step, because the button to do this is disabled. I also found that messing with this fw is not a good idea, cuz there's no way to undo this, also not with flashing another rom or doing a restore.
So then I found this link, and I contacted member Deviant Ollam for some help, big ups for his help
http://forum.xda-developers.com/showthread.php?p=36897862&postcount=3
So this is what I have done so far:
- chmod 777 on the /data folder, and I copied all the SlimISP files I could find, and also chmod 777 these files.
But still the camera would not work.
The only way the camera works is with the Stock ROM...
Anyone got an idea of what I'm doing wrong?
Are you trying to use the Samsung camera or the one that comes with CM?
Samsung cameras won't work on CM as they don't have the correct framework. Did you try the camera before flashing CM at all? Have you tried any other camera apps to see if they work?
tried flashing this - http://forum.xda-developers.com/showthread.php?t=1746611 ??
works fine for me and has additional features to the stock AOSP camera
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
mikep99 said:
tried flashing this - http://forum.xda-developers.com/showthread.php?t=1746611 ??
works fine for me and has additional features to the stock AOSP camera
Click to expand...
Click to collapse
Hi Mike,
So I first flashed to android 4.2.1 so that I could use the latest camera MOD. But no cigar. I even deleted the original Gallery.apk with Titanium, then I flashed the MOD, still the same result. Just don't understand why..
bigmo7 said:
Are you trying to use the Samsung camera or the one that comes with CM?
Samsung cameras won't work on CM as they don't have the correct framework. Did you try the camera before flashing CM at all? Have you tried any other camera apps to see if they work?
Click to expand...
Click to collapse
Yes It works with the stock ROM, no issues there. Other apps dont' work either.
kennyglass123 said:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
My mistake, soz, thanks for moving it for me.
Did you full wipe, cache/dalvik etc...?
mikep99 said:
Did you full wipe, cache/dalvik etc...?
Click to expand...
Click to collapse
yes, I do that with every flash
Not really sure then - I've running SlimBean 4.2 and the camera works fine....
mikep99 said:
Not really sure then - I've running SlimBean 4.2 and the camera works fine....
Click to expand...
Click to collapse
I just tried that ROM, also with the MOD you suggested. Still not working... very strange.
I think it has something to do with the FW version of the camera..
When dialing the *#34971539# number on a stock rom, it tells me my camera has the ZH* firmware.
I don't find much about this version on forums and google...
vandaalius said:
I just tried that ROM, also with the MOD you suggested. Still not working... very strange.
I think it has something to do with the FW version of the camera..
When dialing the *#34971539# number on a stock rom, it tells me my camera has the ZH* firmware.
I don't find much about this version on forums and google...
Click to expand...
Click to collapse
I'm having the same issue. I tried CM10, CM10.1 and AOKP. Eventually gave up and restored to stock.
Also, I realize this probably sounds dumb, but when I dial *#34971539# on my stock rom, I get the VZW recording saying the number cannot be dialed. What am I doing wrong?
bandit2443 said:
I'm having the same issue. I tried CM10, CM10.1 and AOKP. Eventually gave up and restored to stock.
Also, I realize this probably sounds dumb, but when I dial *#34971539# on my stock rom, I get the VZW recording saying the number cannot be dialed. What am I doing wrong?
Click to expand...
Click to collapse
Are you sure you got a decent Stock rom? because it only works on Stock roms
http://forum.xda-developers.com/showthread.php?t=2113526
Hello,
I have a problem with my Xperia X10i. When I want turn on camera, I see only "Application
camera doesn't work". I installed other application like Vignette or Camera360, but still
doesn't work. Previous owner said that probably it happened when android was upgrading from
1.6 to 2.3. I tried a change ROM for another 2.3 but camera still doesn't work. The solution with throwing
out a .thumbnails folder doesn't work too.
android 2.3.3
bandwidth 2.1.71
kernel 2.6.29 modFXP-DoomKernel-v04b
Try flashing stock kernel with flashtool. Yours can be find on X10 Firmware Collection thread.
Envoyé depuis mon Xperia X10 avec Tapatalk - @CF_Minecraft (www.craftfriends.fr)
robertk1 said:
Hello,
I have a problem with my Xperia X10i. When I want turn on camera, I see only "Application
camera doesn't work". I installed other application like Vignette or Camera360, but still
doesn't work. Previous owner said that probably it happened when android was upgrading from
1.6 to 2.3. I tried a change ROM for another 2.3 but camera still doesn't work. The solution with throwing
out a .thumbnails folder doesn't work too.
android 2.3.3
bandwidth 2.1.71
kernel 2.6.29 modFXP-DoomKernel-v04b
Click to expand...
Click to collapse
Open camera app and when it says camera doesn't work then open camera app without closing previous one( holding camera button or from recent apps menu)
Bigkiler5 said:
Open camera app and when it says camera doesn't work then open camera app without closing previous one( holding camera button or from recent apps menu)
Click to expand...
Click to collapse
Yours soulution doesn't work.
I will try to change a kernel.
Did you flashed a custom ROM? If not, why are you using a custom kernel tailored for FXP's CM7 (from the build name, I assumed)?
robertk1 said:
Yours soulution doesn't work.
I will try to change a kernel.
Click to expand...
Click to collapse
Try to repair your phone using pc companion. It will restore your kernel and rom to stock and then if the camera works, root and flash any kernel
Bigkiler5 said:
Try to repair your phone using pc companion. It will restore your kernel and rom to stock and then if the camera works, root and flash any kernel
Click to expand...
Click to collapse
Prevoius owner had dixperia 8 custom rom
I tried to repair with seus and pc companion, but camera still doesn't work
I tried to flash stock rom via flashtool, but without effect
I tried to flash stock android 1.6 via flashtool but phone didn't turn on. I saw only SoneEricsson inscription an later a yellow triangle sign
Later I flased a stock 2.3.3 rom via flashtool, phone work, but camera not.
Now i have kernel 2.6.29 - 00054- g5f01537 [email protected] # 1
Is existing something what i can do with this phone?
robertk1 said:
Prevoius owner had dixperia 8 custom rom
I tried to repair with seus and pc companion, but camera still doesn't work
I tried to flash stock rom via flashtool, but without effect
I tried to flash stock android 1.6 via flashtool but phone didn't turn on. I saw only SoneEricsson inscription an later a yellow triangle sign
Later I flased a stock 2.3.3 rom via flashtool, phone work, but camera not.
Now i have kernel 2.6.29 - 00054- g5f01537 [email protected] # 1
Is existing something what i can do with this phone?
Click to expand...
Click to collapse
At the end I think it might be a hardware problem. I got no more solutions wait until someone else posts a solution:thumbup:
[Q] "errormessagehandler.handlemessage (-1)" When Using Camera, What Gives?!
Hi, After clearly doing something wrong when downgrading from JellyBlast to the stock Ginger Bread ROM, I now get this error when I try and use the camera,
"WARNING,
Camera Failed
errormessagehandler.handlemessage (-1)"
________________________________________
Anyone know how to fix this?! I have wiped I dont know how many times so that is not a fix, for me anyway.. Also downloaded 3rd party camera apps and all, Is there some driver or something I am missing, this cannot be permanent there has to be a way to get the camera to work again right?! Any help would be great!
Infused4life said:
Hi, After clearly doing something wrong when downgrading from JellyBlast to the stock Ginger Bread ROM, I now get this error when I try and use the camera,
"WARNING,
Camera Failed
errormessagehandler.handlemessage (-1)"
________________________________________
Anyone know how to fix this?! I have wiped I dont know how many times so that is not a fix, for me anyway.. Also downloaded 3rd party camera apps and all, Is there some driver or something I am missing, this cannot be permanent there has to be a way to get the camera to work again right?! Any help would be great!
Click to expand...
Click to collapse
Do wipe data and cache in stock recovery
and then again flash Stock Rom via Odin
If the problem still exist then try to change your Stock Firmware.
Sent from my GT-S5830i using Tapatalk 2
Hitesh2626 said:
Do wipe data and cache in stock recovery
and then again flash Stock Rom via Odin
If the problem still exist then try to change your Stock Firmware.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks, Hitesh,
Know anywhere specific to get zed Stock Firmware? I wish kies was of some help, one of the worst computer software I've ever used..
Infused4life said:
Thanks, Hitesh,
Know anywhere specific to get zed Stock Firmware? I wish kies was of some help, one of the worst computer software I've ever used..
Click to expand...
Click to collapse
Go To Sammobile 's site Google it Download a firmware from their and Follow these Guide
Sent from my GT-S5830i using Tapatalk 2