I have problem Pc companion sees my X10 mp like "big" X10 and installing X10 drivers. I can browse my files on card etc but I can't flash kernel in Flashtool I have error no drivers installed.When I pick up my phone in Flash mode my PC freeze and I mus restart PC . I haven't got this problem earlier. My x10Mp is running on nAa 11 kernel.
EDIT
OK I know solution of PC freeze I must run PC in safe mode But Pc companion detect big X10 not x10mp and when I turn phone in flash mode phone is in flash mode about 10 sec then phone normal starts
EDIT2
Sorry for my bad English
try the repair option in PC Companion, it will let you select your model, instead of PC Companion detecting it, you can get to it without even attaching your phone to your computer, just plug it in when it asks you for it (which is the connect in flashmode stage). maybe that way it will work
You will be back on stock firmware, but i guess that can be fixed again.
Related
Hey guys
I have the problem that my x10 mini pro has stuck in xrecovery while flashing a rom and now ich can't flash it anymore because no pc recognices it
Seus and binarys flash tool don't see my phone so I can not flash it
but I can enter flash mode
please help
in seus start support zone click repair and go further till it shows up that you need turn off your phone and pluging usb with pressed back button.
but my pc and others don't recognice my x10 mini pro...
so seus does not see it
just try those steps first :
1.unlug your phone from pc and turn phone off
2.start seus selsct support zone, click repair phone select continue then next
3.your pc will start prepaering for update
4.select mini pro from list
5.conect usb to pc and then press and hold back buton and conect usb onto phone
6.then it must start dowloading update and repair phone
if still dosent work reinstall phone drivers on your pc and try again.
There is no support zone anywere -.-
drivers are installed correct casuse I flashed it before with no probs
do you have this?
Edit: sory my bad install Sony Ericsson PC Companion from oficial site if you dont have it
I have found it but it still does not work
my pc does net see my phone I don't even hear the sound that it is plugged in to my pc
that is my problem pc companion and seus and binarys flasher don't see it...
is there a other way to flash it?
or is there a thing like the usb brick thing like the galaxy s ?
repeat those steps above with Sony Ericsson PC Companion.it need to work.if still not then are te drivers on pc messed up beacuse this is the only way to fix phone.or try flash tool.
for any other ways i dont know i havent got that kind of problem.
I have tried it several times but every time the same result...
my pc does not se my phone (no sound that it is plugged in)
so I can not flash it anymore...
now I have a full Brick -.-
you cant brick your phone so muct that you cant fix it.
if your pc doesnt recognize your phone then is problem on your pc not phone.
so just for try reinstall your drivers and then you will se
EDIT: can you go into xrecovery and use it?
I have tried it on several pc's and I installed my drivers to flash it correct...
I had done this before and it worked
my pc's havent changed since then...
but after I flashed slades froyo once again (had random reboots, made wipe and tried to install again) it stuck while flashing in xrecovery and the only thing I could do is to put the battery out...
And now it won't be seen by any pc...
and not form seus, pc companion, and binarys flash tool...
then i dont know what is going on with your phone beacuse no one had this kind of problem.
can turn on your phone is there any sing if it's working?
I can turn it on and it repeats booting...
classic bootloop but nothing else no xrec and not even charging -.-
and it is not seen by any pc -.-
well your phone is still working this is good sing.
pc will not recignized your phone when is on boot.
but is strange why is not recognized in flash mode.
maybe you could try with hard reset and then it could be recognized.
hard reset is on the right site of camera over sim try with that
can you post a picture of that?
and are you sure that this is a reset button?
well some one on forum mentioned that.
hmm I tried it but nothing happened -.-
an it does not feel like a kind of button...
guess I need to send it back to se...
and wait 3 weeks till i get it back
USB maybe
Sent from my U20i using XDA App
yes it is the usb
but i don't have a clue how to fix it
there is nothing broken but it doesnt work no more
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Damion1983 said:
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Click to expand...
Click to collapse
bad luck 4 u......
i have this problem like this x10mini(my friend phone).....seus not work....flashtool say usb debugging if off...
but PC companion work for me...
SE X10mini with GINGER-DX
HAAHAHAH!!!
Can't believe it,after no sleep and lots of coffee
Got it working,plus flashed GingerDx which is one awesome amazing rom
The whole problem was with Windows 7
After extensive googling, I came across information that Windows 7 compatibility has issues with USB Debugging drivers
Had to set restrictions within Windows and then force install specified drivers
I used Flashtool with admin rights and first tried to flash a whole .ftf but did not succeed
The only .ftf that flashed was the E10_nAa-08_2.6.29.6-nAa-08.ftf
but that only includes a kernel and loader (but which helped me to be able to enter recovery
This is where i copied the Gingerdx.zip file on my SD card and tried to install
Did not work thou,baseband issue like before
So I took a chance,went back to Flashtool and tried to flash another .ftf file
2 of them failed due to the USB debugging issue. I un-installed the USB driver from computer manager,set Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Thus from here did the whole .ftf flash and then in recovery mode installed the GingerDx.zip which worked now due to the baseband being correct
Thank you coffee,screw you Windows 7 (PS : also being 64bit)
And thank you for one awesome O/S stelios97
Sir I have encountered problem like yours, but with SE WT19i Live,
Please Elaborate this one..
Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
My Sony Xperia M4 aqua seems to be corrupted. It does boot but settings, internet, network, contacts doesn't work. I tried to use the factory reset method ( volume + power) but it doesn't seem to work. I had not previously enabled usb debugging and can't access settings now. And my pc doesn't seem to show the device in explorer or in Sony companion app. Any help would be appreciated.
try flashtool and see if it recognizes the device in flashmode
else use the official xperia pc companion
it's recover option should be able to bring you back from just about anything
there is also pc drivers to +$?#@ with...
As the pc (in windows 8.1) doesn't recognize sony phone , it doesn't show up in pc companion either.
I would try flashtool then.
hello like the title said
i cant seem to enter flashmode. fastboot and recovery works fine tho
i was trying to install stock rom, xperia companion app and flashtool doesnt help
flashtool said something like usb debugging off, and 2011 devices bla bla (usb debugging IS NOT OFF its ON) tried 2 different version the 9.18 and 9.2
the green light did light up only like 1s then off then light up again then its gone for good
after that the phone connected to pc and recognized as somc flash device but not recognized by flashtool or xperia companion
first off all its not really a problem because i can still go to fastboot and recovery to flash ROM
but since i want to revert to stock rom (not modified,rooted or anything)
can someone guide me how to fix it? i tried 2 pc + a laptop, flashmode still not detected
Same problem
I'am with same a problema, u have a solution?
You have to wait for flashtool to ask you to connect your phone in flashmode and that is after you've loaded your firmware to flash
Your phone will only stay in flashmode (green led) whilst it is receiving data if it is not receiving data it will switch off after a few second's