When trying to flash with Odin it just keeps failing and failing and failing in the middle of going back to factory??? I BRICKED It by trying to flash back to stock, WTF?
What is those files that the person created the atlernate stock files, for Froyo or something like that. It flashes files, then you flash again with the original stock files. Can someone link me that please????
Try using this all in one AIO Comes with everything you need to get back to stock and has worked flawlessly for me numerous times.
Also, make sure sure you are using the USB cable that came with your phone.
Related
So i factory reset my phone (on stock), made a nandroid backup, then flashed one of bionix's roms. a couple days later i want to try another rom so i went into rom manager and chose to restore and picked the backup that i made earlier while on stock. It completed the restore process and went back to the clockworkmod recovery screen, then i chose reboot. now the phone sticks at the vibrant screen, but makes the bootup sound. weird huh? do i have to use odin? or is there somehow i can still restore using clockworkmod. i am able to still get into recovery btw . if the only way to fix is thru odin, can someone link a current post with instructions? thanks peeps.
BTW i was on JI6 when backing up, and i read fusion 1.1 runs on JI2 so......help?
Feel free anyone to correct me since I'm also fairly new at this, but it sounds like you may have soft bricked your phone. The way I understand it is that you needed to flash back to a stock kernel before restoring your stock ROM backup.
Getting back to a stock kernel can be done by either flashing a ROM that uses/applies it (they usually state what kernel they're using), or just flashing the stock kernel yourself, which can be downloaded here: http://forum.xda-developers.com/showthread.php?t=733792
Anyway, here is a thread that explains ODIN: http://forum.xda-developers.com/showthread.php?t=810130
Good luck! I fear I'll be in your shoes at some point, so hopefully I helped a little.
okay i'll preface this by saying i read all the way through the Vibrick thread and any others i could find on this subject.
i was running NeroV3, decided to try CM7. made a dumb move (apparently?) by restoring back to my stock 2.2 backup via CWM, then flashing to CM7 and THEN trying to flash the Overstock kernel (these steps should be reversed?). i wiped the cache and dalvik cache, but then the kernel flash failed ("installation aborted"), so i rebooted, which went fine. i used ROM Manager to get back to recovery, tried flashing the kernel again, failed again, hit reboot, and then my phone got stuck on the Vibrant screen.
I tried every 3-button combo (also with battery pulls) to get to Download mode but nothing works. when i plug in the USB the spinny-working-hourglass thing pops up but freezes, the green charging bar does not come up, and it does not go to download mode.
when not plugged in, it just keeps returning to the Vibrant screen. i can't even get it to turn off without pulling the battery. i'm definitely not comfortable trying the solder method.
any help is appreciated - i'm not giving it long til i take it to t-mobile and play dumb, worst comes to worst i'll just get a cheapo replacement from the store and find another vibrant (or similar) used on craigslist.
thanks!
UPDATE:::
got the phone into download mode thanks to a thread by Dolphinwigs. had to do have odin open when replacing the battery/holding volume up/down.
waiting on the stock rom download now (internet is slow). hopefully all goes well from here...
The biggest issue I find is that people give up on ODIN to easily. Getting into download mode is not that hard but also not that easy eiither. This is why everyone should purchase a jig, never give up on ODIN try it a thousand times and then once more. Always have ODIN up and ready with the proper files on hand, and as soon as it connects to ODIN be ready to make shyt happen.
In your case an ODIN flash should get you where you need to be and after you root again flashing to CM7 should not be an issue. Keep in mind if you use the .tar in ODIN as well as the .pit you will lose everything on both internal/exteral SD. At this point unless you made a backup prior to your issue its really a lost cost.
Good luck!
i am now back up and running, i just didn't realize i needed Odin running when i tried to go to download mode. so simple, but so frustrating.
one thing though, the ROM i got is Eclair. do i need to update to FroYo before flashing CM7?
and also, so i do it right this time, do i flash the Overstock kernel BEFORE i flash CM7? or does it matter?
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Joeyjr25 said:
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Click to expand...
Click to collapse
Start with getting back to stock using this guide. Check for ICS bootloaders too, you probably flashed them and you have to get stock ones back (careful, flashing bootloaders can cause hardbricking). Once you're back to stock and rooted, you shouldn't need to ever use PC Odin again.
Then use this guide for rooting/flashing.
One other note: when you tried to install CWM, it sounds like you loaded an update.zip onto your phone then tried to install it using stock recovery. Stock recovery won't let you install unsigned update.zips, which is why that method for getting CWM on your phone will never work (hence the authentication error and installation abort). For our phone, CWM is only included in custom kernels, that's the only way to get it on there, and don't even think about updating or changing it via other means. Just flash a custom kernel, it'll include CWM, use it until you want to switch kernels.
Hit my thanks button, I was really nice this time. And post in Q/A next time as well.
EDIT: Skip the second guide if all you want is stock. You should be able to update OTA after following the first guide. Though even if stock is what you want, I highly recommend flashing a custom GB kernel because a) they're more stable and faster and b) you'll have CWM in case you need it.
You started off mentioning about "leak ics" which I have absolutely zero experience.
My suggestion:
1. Try to get it back to stock. Make sure it works correctly.
2. If hasn't rooted yet, do so.
3. Getting CMW into the device by flashing custom kernel.
4. From there, install any ICS ROM you want.
So, after having my gnex, and being ruined by the automated flashing utility, I tried to root my note 2 Verizon. So, I first went and flashed to the stock 4.1.2 and then tried to put cwm on it via odin. Wont do it. Tried copying the files to the sd card and doing it locally, no go. So, I tried the automated one. Well, that seems to have put my phone into a constant loop where only Odin mode works. So, I started to flash the stock rom again via odin, and I get to the end of the flash, and it fails right at the end. I cant tell whats wrong. The phone gets all the way over too. It just fails. Ideas?
Also, side note, I also forgot to uncheck the repartition button in Odin when I did the last step. I did have the PIT file in there though for the mapping.
note 2 trouble
I used an online place to fix my note 2. Kind of a bummer but I had to ask for help. I used mobiletechvideos.com. give them a look online and a call and maybe they can help.
Ok, I loaded miui and didnt like it too too much, so I wanted to go back to anything else. Can not flash anything, so Odin back to stock... which put me into the att screen, and stuck... doesnt move. I think miui may have changed bootloaders, it use to on my old infuse. What in the world do I do? Most of the odin files links are dead. I need something that will write over EVERYTHING and get it back to where I need to stock to get it going agian.
Thanks.
getting this file and flashing in the pda section of odin did the trick. http://server11.stockroms.net/download/GalaxyNote/SGH-i717/attstockrom.zip