hi,
i have my touchpad with cyanogen alpha 2, batery dead 0%
i have connect it 1 night with official charger, but nothing (when i conect it i have not the icon batery)
not possible boot android or webos....
if i connect to my laptop, i have nothing
have you a solution for me?
tyvm
ps/ sorry 4 my bad english
Try and boot it with the power lead connected and if it works, boot into WebOS until it has charged.
thx for reponse,
not start with the cord plugged in and impossible to boot webOS ....
I thought to buy a touchstone, hoping that I can charge my batery with it
It is possible that the charger connector or the TP socket is broken, have you tried a different charger? even a phone charger would show some sign of life.
M3GATROLL said:
hi,
i have my touchpad with cyanogen alpha 2, batery dead 0%
i have connect it 1 night with official charger, but nothing (when i conect it i have not the icon batery)
not possible boot android or webos....
if i connect to my laptop, i have nothing
have you a solution for me?
tyvm
ps/ sorry 4 my bad english
Click to expand...
Click to collapse
My touchpad went dead because I didn't use it for a couple weeks and forgot to turn it off or leave it on the charger. It wasn't easy to get it to charge. I just kept trying various combonations. Plug in for 20 minutes. Unplug, hold all the mechanical buttons for a minute. Repeat. Leave off charger for 20 minutes. Try something again. Hold buttons while inserting charge cable. Finally ............. success ............ just kept trying
Related
Hi
I think my phone is a little broke,
It ran out battery last night so i put it on charge this morning.
was on charge by wall for 10 min to get some battery then swapped over to car when i was driving it turned off now when i try and charge it at work via a usb wire and cplug converter i just get the battery logo with the spining circle for a few seconds it flashes then goes off does this about 6 times then the screen just goes off and will not do anything
anyone know any fixes or has it gotta go to samsung ?
Thanks
Have you tried taking out the battery?
Please let us know if it starts working again.
tried that, its like its not getting the power it needs for thats first few seconds as the buttons at the bottom flash on then off again
With the phone OFF. Leave it charging for four hours using the supplied mains charger.
With the phone OFF do you see a picture of the battery showing how much charge you have when you plug the phone into the mains charger? How much charge does it show?
it comes up with the b attery with a circle logo init then turns off then comes back to that over and over again,
i dont have the proper charger on me just the usb wire and a plug to usb
Think getting somewhere, tried a mates battery that works fine, mates charger wont charge on my phone but will my battery in his, so i guess my micro usb port is broke :'(
Hello all,
I was wondering if someone could help me out with the issue I am having. I have CM9 Alpha 2 on my Touchpad and it was working perfectly fine until recently. I was able to recharge it using my Touchpad charger when it was booted into WebOS, however, I accidentally left it on over night booted into CM9 and the battery died and now it will not charge. I have tried to use the Touchpad charger and the screen turns on and shows a dead battery symbol then shows a picture of a power cord and then the display turns off and doesn't charge. I then try using a BlackBerry charger and I plug it in and try to turn it on and it says to reliably charge this device use the charger that came with it and then turns off and doesn't charge. In both instances I have tried to do a hard reset (power and home button) in hopes that would make it reboot and charge but it does not work.
Any suggestions would be greatly appreciated!
Thanks in advance.
http://rootzwiki.com/topic/19790-help-touchpad-wont-charge-at-all-after-cm9-a2/
You can follow that discussion above... but basically that happens when the battery drains on CM9 (bug). Even if you are able to boot into CM9, if you have the power cable plugged in when it boots, it will not charge. The battery meter will stay at 0% even after an hour of it being plugged in. If you remove the power cable, it will shut off. Like mentioned above, you have to either boot into webOS (keep trying to reboot till you get moboot to load) or maybe get lucky and unplug/replug the power cable while in CM9.
I bricked my touch pad n I couldn't figure out how. I have 3 touchpads in the family n the one i bricked was the last one. Same issue on charge all night but no charge.
Cause was the original USB cable had failed. Just in case u have the same issue plug a blackberry short USB cable into your original HP charger n see if it works. That how I got round my issue. Samsung PC USB cable also works.
Good luck
I nearly lost mine, thanks to this thread I'm charging in WebOS back at 6% from 2%, whew! Thank you all.
"iDon't" ... Powered by HTC and LTE using XDA Premium App
Hi to all
Hope that somebody will be able to help me. The battery on my Venue was completely drained last night during a phone call and the phone shut down. I connected the charger, waited for 30 minutes and tried switching it on, but all I got was the info on the screen is a pic of battery with 0% in it. I tried charging it overnight, connecting it to a computer, but nothing happened, each time I try to switch it on, I get that info (battery 0%).
The battery was ok, I was using it for two whole days before it drained so much that it shut down. I have no custom ROM installed, everything is completely from the factory. I tried taking the battery out, SIM card out, SD card out, no luck. Never had my battery completely drained before, so I can't say if this would happen before. Battery worked perfectly until now.
Found an info that it might be due to the battery protection circuit...? Unfortunately, can not take it/send it to Dell as I bought it in US, and I'm in Europe now. Any idea of what I could do? I would really appreciate it...
Thanx!
Ok, here I am, not to jinx it, but I think I resolved it. I tried switching on the phone again, but with no success. Then I tried entering the setup menu (or whatever it's called) by pressing 'volume down' key and on/off switch, in which I succeeded and saw the setup screen. I DID NOT TOUCH OR CHANGED ANYTHING, just left it like that, connected to the wall outlet charger for a few minutes. After the screen shut down on itself, I took out the battery (after unplugging it from the wall outlet) and put it back after a couple of minutes. Then I plugged the phone in the USB slot of my computer and left it like that for 15 minutes. I tried switching it on again and it worked - the battery was on 3% and the status was 'charging'. Now it's on 51% and 'charging'.
I hope that is the end of the problem, I will never let the battery drain out completely again. Just to be on the safe side, I ordered another battery from dell.com.
Hope this helps someone.
hi you, my V had that problem too, i shutdown phone, connect the adapter, icon battery show on the screen and wait 15 minutes then hold on power button, everything will be ok
i also had a problem charging with the wall adapter when i switched to custom rom (cm7) for 2 days but after 2 days it started charging from the wall adapter..
Thanks a lot people here
This helped me a lot
My dell was 0% when it switiched off automatically
I connected to wall charger in the night
Till morning it was 0%
I read above
But all I did was connected it to USB slot in PC
and left for 10 mins
Then started it
And it went on
No such problem has arised for me till now.
Actually im using samsung galaxy y's wall charger!As i had that in my room, and both uses same charger, i didnt change it and kept dell charger in the box only!
Though using data cable of dell for pc
Wall charger takes 2hrs max to charge the venue fully.
hi
so i have a progress,now i stuck on question on battery
when i succeeded to power on the razr,the battery was great! charging good,good time
but now when i plug the phone to wall charge M logo is appears and after it battery with question mark
if i connect to laptop ,so i have just led
i was in some underground lab,they said it doesnt matter if the cable is origin
please help, i need the phone alive
talboris said:
hi
so i have a progress,now i stuck on question on battery
when i succeeded to power on the razr,the battery was great! charging good,good time
but now when i plug the phone to wall charge M logo is appears and after it battery with question mark
if i connect to laptop ,so i have just led
i was underground lab,they said it doesnt matter if the cable is origin
please help, i need the phone alive
Click to expand...
Click to collapse
never experienced that. did you charged it with stock charger?
only thing I can tell you right now is that charging with a laptop with not help. that led is telling you that there is not enough power from that USB slot. most laptops will not be able to charge a RAZR.
Hi guys I'm looking for some opinion to point me in the right direction.
Bought a Z2 from Ebay as "parts non working" when I got the phone, tried to charge it but didn't charge, after some reading saw a comment from a guy sayin' "cut a usb cable and make some kind of wireless charger", did it and the device started to charge, well once charged turned on device, made the set up and started to download update after update.
Once ended unplugged from the homemade charger and plugged to my laptop (W7) and just made nothing, not even on my cellphone (No charging led, no notification). After some read tryied the pc companion method and guess what DIDNT WORK, tryied the flashtool method and same thing, but the thing I noticed is when try to connect the device into flashmode the green led turn on for a second and turns off almost instantly.
Also the battery is draining to fast, like 1% every 6 min even if Im not using it tought was the home made charger but 3 days ago picked a magnetic cable to charge the phone and battery drain persists, Im using a 2 A Samsung wall adapter.
You think it may be a damaged USB port, battery or both? I'm bootloader allowed yes, thanks in advance.
AWESOME
Admin, please delete.
Thank you.