I did something terrible with my HTC Sensation XE and while trying to S-ON i bricked it using the following command...
fastboot oem writesecureflag 3
Now em unable to switch ON my cell phone.. Its completely BRICKED... Has anyone over here any idea on how to resolve this problem... If you know of some method kindly post the link here...
Thanks
I think, you can use Flashtool while the phone is in service mode
As i said its not even powering up then how else can I get into service mode?
Related
guys plss i need urgent help, my htc amaze 4g with wind mobile is bricked at htc screen, and i cant download a stock ICS or gingerbread rom because it says "CID incorrect, update failed" on the bootloader screen. i read forums on how to s-off, but the steps include being in usb debugging mode, problem is i cant be in usb debugging since i cant access my phones settings from home screen since im bricked, there has to be a way around this plsssss help. how do i s-off without usb debugging????
Had the same issue, this is what worked for me.
You need Amaze all in one tools with your unlock_bin in the data folder of the program.
Al I did was remove the sd card, install a custom recovery, then unlock bootloader and then it just booted with the rom I had before that was on the phone internal storage. I hope this helps.
Ok guys I just move to Pennsylvania from Florida a few days ago and i was having problems with my data connection so i decided to call sprint and spend about an hr on the phone with costumer service try everything to restart my service and get better data, but nothing work so she tell me my last option was to take it back to sprint, so I decided to relock and to run the RRU, so i did the relocked on fastboot comand window and the phone restart to fasboot and now says ***relocked*** and under it it says ***security warning*** I try everything (rebbot, factory reset, power of ect.) all the the phone does is restart to splash screen and go back to fastboot plz i need help asap, thanks.
prboy25 said:
Ok guys I just move to Pennsylvania from Florida a few days ago and i was having problems with my data connection so i decided to call sprint and spend about an hr on the phone with costumer service try everything to restart my service and get better data, but nothing work so she tell me my last option was to take it back to sprint, so I decided to relock and to run the RRU, so i did the relocked on fastboot comand window and the phone restart to fasboot and now says ***relocked*** and under it it says ***security warning*** I try everything (rebbot, factory reset, power of ect.) all the the phone does is restart to splash screen and go back to fastboot plz i need help asap, thanks.
Click to expand...
Click to collapse
Nothing to worry about. Please read my previous reply to a similar problem. Remember: if the phone does something it is not a brick, and since it is Android it can be fixed. So cheer up!!!
Are you working off the latest Jewel RUU here:
http://forum.xda-developers.com/showthread.php?t=1655733
Here all available RUU for Jewel
http://www.filefactory.com/f/b6eb73c80cc97030/
How to unroot/unbrick device video: (Thanks to qbking77)
If you have unlocked device, you should lock it first with command fastboot oem lock, otherwise you won't be able to install RUU.
http://www.youtube.com/watch?v=NChdbyaHy3k
georgikol said:
Nothing to worry about. Please read my previous reply to a similar problem. Remember: if the phone does something it is not a brick, and since it is Android it can be fixed. So cheer up!!!
Click to expand...
Click to collapse
thanks try to run the RRU one more time and it works
The OTA bricked my phone. I can RUU it but anything else will not load. Fastboot brings up my serial, adb does not. Does this mean before my phone got the update I was not in USB Debugging mode? If so will I not be able to fix my phone. I have been at this for a few days going through the site trying everything I can. Right now I am in Tampered and Relocked. Thanks for your time and help. -SD70ACEJM
Alright guys, Ive been trying to fix my friends DNA i guess from what he said is that he had a system update happen on his phone and it would just stay on the "HTC Quite Brilliant" Page. I tried a factory reset, and that didn't do anything, I went into recovery to wipe cache partition. I also tried wipe data/factory reset from recovery as well as hboot. so i got adb and i plugged the phone in while on fastboot. "adb devices" Shows nothing its just blank underneath the listed devices. So i figured that the drivers wont install i installed htc sync manager as advertised has the supporting drivers. Htc sync manager reads the device but doesn't say its a DNA it just says that its rom number. I tried to go to fastboot and put a previous dated RUU on but it had a error and just couldn't do anything with the phone. So now i went into the recovery and behind the menu screen it says "updating software from verizon wireless" but theres a issue with that is that the sim card in it isnt activated anymore so theres no data going to that phone if it is updating and if it downloaded the os to the phone it should be wiped since i did a factory reset 3 times and wiped cache 3 times as well.
So What i think is wrong is that:
I need usb Debugging on
S is on
Drivers wont install properly
I may need a active sim card to pass the updating?
MoNARUDO PVT S-ON RH
HBOOT-1.57.0000
Radio-1.01.01.1112
OpenDSP-v10.120.274.0520
OS-4.09.605.1
eMMC-boot 2048MB
Mar 13 2014, 19:19:14.0
I really hope that you guys can help me out thank you!
HTVdev
I tried to unlock the device to see if this would help out and i got it connected and i went and i got the token for the device and went to get the tocken and it came back with a error code
Error Code: 160.
Error Reason: MID Not Allowed.
Can someone please help me out here?
I was missing android sdk and i installed android sdk, and my device will read in adb but when i got to flash a udate it will read signature error. but im not using the word update im using "fastboot flash hboot hboot.img" and so forth and its not working i still cant get the hboot to unlock. please help me figure out if its possible to fix this phone im really determined to fix it and i need alittle bit of help.
Unfortunately, unless you can boot into the ROM, you cannot unlock this phone. I suggest contacting HTC support and let them know the update soft bricked the device and since you cannot unlock it, you need their help in getting it to boot again. HTC is very good when it comes to support, even for phones that are out of warranty. Support staff have been instructed to fix any m7 even if out of warranty period for the camera issue (talked to a rep personally on this issue today when making small talk). I am sure if their update borked your phone and it hasn't been tampered, they will fix it free of charge. What's the worse they can say, no?
Sent from my One using XDA Free mobile app
I contacted there support 2 times on the phone and once trying to live chat and i got hung up on twice.. so im at loss here
Im really not happy with htc they cant tell me anything to any cause to why there update would cause the softbrick on the phone itself did anyone else have a issue with 4.09 update bricking your phone?? and did anyone find a solution for it?
Hello, I've been trying to use this tutorial -> http://forum.xda-developers.com/desire-610/general/info-htcdev-unlock-root-t2844323 To root my HTC desire 610. Everytime I try it I get no luck. I did everything exactly as explained but when I go into cmd and type "fastboot oem get_identifier_token" as explained in the tutorial through HTCdev, command prompt does not do anything. When I hold down my bottom volume and power button and enter that boot mode though. I notice it says "TAMPERED" "LOCKED" on the top left hand corner? Is this what is stopping me? I tried using KingRoot a couple days ago and maybe this screwed something up making it tampered. I honestly do not know. I'm not that knowledgeable about rooting phones But I defiantly just wanna get this root over and end this throbbing headache. Any help is greatly appreciated. I followed the tutorial to the TEE and still no results. Please help. Thankyou.