Hi all,
I am not able to get my photon connected to CDMA WS after flashing with CM9 RoM have tried with 0.5.2 and 0.6.0 and 0.6.1.
Have checked in device manager the correct port and CDMA WS connects to the port but not able to read from phone ?
Pl help.Due to this i am not not in a position to dump the new PRL update file / NV Dump file after flashing with new RoM
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
OrAmerika said:
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
Click to expand...
Click to collapse
Same issue was there when i flashed Roms using KS (tried CNA,CM9) and tried MUI Rom also still not use. But i was able to use it on stock RoM
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Also, make sure you have Jokers CWM.
Same issue
I was having the same issue, except right when my phone booted up it kept giving me the message that android.process.phone has stopped working, and it wouldn't let me connect to the mobile data network either.
Acvice said:
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Click to expand...
Click to collapse
Not able to find .3.1 can you pl direct me to the download site.
Akhileshjj said:
Not able to find .3.1 can you pl direct me to the download site.
Click to expand...
Click to collapse
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
bullfrog527 said:
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
Click to expand...
Click to collapse
thanks got it.
I just spent the last 6 hours figuring this out and go figure it would be in the Q&A section... Did a fresh stock flash, factory wipe, format cache, dalvik and system. Installed .3.1. Then ONLY wiped the dalvik cache and upgraded to the 6.1 i would stop getting the com.android.phone FC. If i did the factory wipe it would start FCing again.
cdma
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
sibin.mohan said:
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
Click to expand...
Click to collapse
are you asking about CDMA in india ?
Related
I just flashed the latest version of Miui (v4 2.6.15) using the aroma installer but i cant connect to my network. I can see calls coming in but it says the process com.android.phone has stopped and i get a force close.
I edited the build.prop ro.telephony.default_network to 0 from 7 and i also did the *#*#4636#*#* and changed to gsm only but i get the same com.android.phone error .
Does anyone know a way to fix this cause Miui seems much better than the stock rom so far.
I am assuming you are international GSM?
Sent from my CM9 beast
Yeah, Im not in the us
Have you checked the CM9/MIUI fixes thread stickied in the Dev forum? Or the CM9/MIUI questions thread here. There may be a fix in one of those or the old MIUI thread that spleef had before th3bill took over
http://forum.xda-developers.com/showthread.php?t=1536161
[MIiui.us]MIUI/ICS port [unlocked] 5/19/2012
Sent from my CM9 beast
i tried the miui gsm fix from jokersax site and also the cm9 gsm fix but none of them worked.
did you flash the aroma version or the "normal" one? i think the aroma one has a gsm set up built into it. you shouldn't need any of the fixes as i think they are older for previous versions of MIUI/CM9
Thanks for the help bullfrog527 but i went back to stock cause i needed my phone working although i narrowed the problem down to the miui phone.apk .
Btw, do u know if there is anyway to dualboot so i can have a custom rom along with the stock?
No problem, wish I could have helped more. I don't think anyone has tried or is working on a dual boot, sorry
sent from my CM7 MoPho
if you are getting force close problem during an incoming call..go to rom manager and fix permissions..it will work.
Hasanb21 said:
Thanks for the help bullfrog527 but i went back to stock cause i needed my phone working although i narrowed the problem down to the miui phone.apk .
Btw, do u know if there is anyway to dualboot so i can have a custom rom along with the stock?
Click to expand...
Click to collapse
The Phone.apk is fine on the rom for GSM...honest. The issue is that you need to flash the rom, then the fix (before rebooting your phone for the first time). This sets your ro.telephony.default-network to 0(GSM)
the stock CDMA is 7
If you have an issue after that, in Dialer, punch in *#*#4636#*#* and go to Phone Info
Check that it's set to GSM auto or GSM only. If it's not, change it to one of those and reboot
data works fine on stock gingerbread on the facinate, but when i installed ics the data stops working any help on this?
We need more info. What rom and your exact install procedure.
Sent from my SCH-I500 using Tapatalk
shelby04861 said:
We need more info. What rom and your exact install procedure.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
this!!
the device was bought and came with 2.3.5
plugged the device to the computer
opened odin
pit Atlas 2.2
pda powerwashed b3 ec09 modem
reboot to download again
flashed cwm4 recovery
reboot the phone and let it boot
shut off phone and enter recovery
flsah aokp ics build 39
(i have tried flashing build 2 first but it will never let me flash build 39 and i have to repeat the entire process to flash build 39 skipping build 2 of course)
and so data wont work with ics aokp or gummy
additional info: carrier is not in the us or canada, its on an island called guam and the carrier is it&e lol...
google ics 3g data fix.zip
er....
I hate to ask but can you provide a link? I searched and found nothing. there was something else though and it said To go #*#*4636*#*# and change it to cdma prl
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
MultipleMonomials said:
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
Click to expand...
Click to collapse
can you please link the thread you got this at? thanks
http://forums.androidcentral.com/verizon-fascinate-rooting-roms-hacks/171161-3g-data-patch.html
I'm having the same problem. My data works fine if I switch back to a gingerbread rom, but stops with any ICS rom. I've even tried to restore the APN's via APN backup and restore, but no luck.
Does anyone have a fascinate ICS rom working with MetroPCS internet yet?
stevebanks said:
I'm having the same problem. My data works fine if I switch back to a gingerbread rom, but stops with any ICS rom. I've even tried to restore the APN's via APN backup and restore, but no luck.
Does anyone have a fascinate ICS rom working with MetroPCS internet yet?
Click to expand...
Click to collapse
did u not read the posts above?
droidstyle said:
did u not read the posts above?
Click to expand...
Click to collapse
Yes, I read the post above, but wasn't sure if this pertained to MetroPCS too. I don't have 3g with Metro.
Also, how do I apply the patch. Do I have to push using ADB or RootExplorer?
stevebanks said:
Yes, I read the post above, but wasn't sure if this pertained to MetroPCS too. I don't have 3g with Metro.
Also, how do I apply the patch. Do I have to push using ADB or RootExplorer?
Click to expand...
Click to collapse
its a zip u flash in recovery
droidstyle said:
its a zip u flash in recovery
Click to expand...
Click to collapse
Awesome! It worked. I appreciate it man.
droidstyle said:
its a zip u flash in recovery
Click to expand...
Click to collapse
sir im having dell venue. apn works fine in gingerbread custom rom but
cant save apn in ics custom rom
help us
the thread is
http://forum.xda-developers.com/showthread.php?t=2002361
stevebanks said:
I'm having the same problem. My data works fine if I switch back to a gingerbread rom, but stops with any ICS rom. I've even tried to restore the APN's via APN backup and restore, but no luck.
Does anyone have a fascinate ICS rom working with MetroPCS internet yet?
Click to expand...
Click to collapse
ive noticed on the fascinate that apnbackup and restore doesnt do much for ics+ so theres a file that is in system/etc/apn-config.xml full of apn settings just add metropcs and ic&e's apns in there using the format, its all the apns that your cdma phone can use, then make into a flashable zip and it will be ready to re-flash everytime you switch roms. i have to do this for my fascinate to get it to work on straight talk lol
if i knew what the apn settings were for them i would make you a zip, ill look into it later tho
hey guys,
so after reading the CM9 install guide, looks like I need to flash the stock ICS first. I'm currently using MIUI 2.1.7 which is still gingerbread.
I went to the stock ICS firmwares:
http://forum.xda-developers.com/showthread.php?t=1544487
But didn't see any North American or Canada firmwares, does it matter if I get the Argentina one, or can anyone direct me to a North American version.
Another question is, after I flash the stock ICS, will I still have my root and CWM?
Thanks,
eclipse
eclipse245 said:
so after reading the CM9 install guide, looks like I need to flash the stock ICS first. I'm currently using MIUI 2.1.7 which is still gingerbread.
Click to expand...
Click to collapse
Incorrect, just flash cm9.
I can go from MIUI gingerbread, straight to the latest CM9?
So just follow the flashing instructions I guess, and skip all the other nonsense?
If you're flashing through CWM there is a long and complex process to flashing such a complicated ROM:
Step 1. Factory reset/ wipe cache/ wipe dalvik cache
Step 2. Flash CM9
EDIT: Remember to keep breathing whilst you do it, sometimes I need to focus so intently on the complex process I forget.
One more question, if I wanted to update CM9 via Rom Manager, to a newer nightly, would any data/apps/contacts be lost or reset, or is it just an update?
Nightlies are just an update, no need for a wipe.
eclipse245 said:
One more question, if I wanted to update CM9 via Rom Manager, to a newer nightly, would any data/apps/contacts be lost or reset, or is it just an update?
Click to expand...
Click to collapse
Don't use rom manager, I've been hearing bad things about it. Just use cwm recovery. And no data would be lost, just don't data wipe / factory reset in cwm recovery
Sent from my GT-I9100 using xda premium
Alright cool, worked fine
thanks a lot guys!
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Nillanic said:
Did a full wipe, installed the ROM, and rebooted. Everything works except for cellular data, anyone have any suggestions? It's on Sprint.
Click to expand...
Click to collapse
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
R2DeeTard said:
Yeah, if you had searched the AOKP thread you would have found that this was an issue with Th3Bill's first release of the MS1 AOKP rom. you have to nandroid back to your last version of AOKP (always backup before flashing a new rom) and then re-install the NEW version he has up on GOO.
Click to expand...
Click to collapse
Will it work if I flash the older version, since I don't have a backup of this specific rom, and then flash the newer one on top of that?
And which older version should I use?
If you flash an older version it will still have the borked radios. I think the only option you have at this point is to flash back to stock and start over.
Sent from my MB855 using xda premium
You don't need to go back to stock. Just flash the new rom that works. The updated rom is great. Use SMS Backup so you can keep your txt messages.
Sent from my MB855 using xda premium
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
koushi2012 said:
first flash the rom whatever cm10 miui aopk
second flassh the gsm zip i uploaded
third flash gapps
fourth flash option chooser dont choose any of gsm or cdma
choose emmc or sdcard
choose not ussc fix and reboot
Click to expand...
Click to collapse
I flashed your GSM fix, and now I dont pick up any service on ANY rom, did full wipes, restores to known working roms, all that, and still no signal.
Mind you I think it has something to do with me being on Sprint in the US
HELP MEEEE
Did u wipe full..
if u belonged to sprint us then try miui which follows some special instructions while flashing sprint phones..,
I am on MDK with Twrp and when I attempt to use a TW 4.3 ROM the phones dialer will not work. I atempt to make or receive a call and the phone will go black and become unresponsive. After the call fails the phone will fiction properly. I still have data and SMS messaging works. I have done clean installs with formating the internal memory. When I flash to a 4.3 asop ROM everything works. Any ideas what I can do to fix this?
shawnxl said:
I am on MDK with Twrp and when I attempt to use a TW 4.3 ROM the phones dialer will not work. I atempt to make or receive a call and the phone will go black and become unresponsive. After the call fails the phone will fiction properly. I still have data and SMS messaging works. I have done clean installs with formating the internal memory. When I flash to a 4.3 asop ROM everything works. Any ideas what I can do to fix this?
Click to expand...
Click to collapse
This is the only 4.3 TW rom available for verizon phones http://forum.xda-developers.com/showthread.php?t=2517611 It works fine. If you trying to flash International Roms use my patch it works http://forum.xda-developers.com/showthread.php?t=2518264
jrkruse said:
This is the only 4.3 TW rom available for verizon phones http://forum.xda-developers.com/showthread.php?t=2517611 It works fine. If you trying to flash International Roms use my patch it works http://forum.xda-developers.com/showthread.php?t=2518264
Click to expand...
Click to collapse
Thank you for your quick response. The first link you posted was the last ROM I had tried. Before posting, I have also tried multiple international roms using your first patch plus your updated patch for heavy themed roms. The only thing i have not tried to flash is diffrent modems. Is there an easy way I can tell what modem I am on?
shawnxl said:
Thank you for your quick response. The first link you posted was the last ROM I had tried. Before posting, I have also tried multiple international roms using your first patch plus your updated patch for heavy themed roms. The only thing i have not tried to flash is diffrent modems. Is there an easy way I can tell what modem I am on?
Click to expand...
Click to collapse
Here Flash the MJ7 modem and never look back! http://forum.xda-developers.com/showthread.php?t=2487298 fore your info the version you have is in setting under phone info under baseband
jrkruse said:
Here Flash the MJ7 modem and never look back! http://forum.xda-developers.com/showthread.php?t=2487298 fore your info the version you have is in setting under phone info under baseband
Click to expand...
Click to collapse
I just did a fresh install after flashing the modem you recommended still getting the same thing. I posted screen caps. When a call comes in nothing works or if I place a call it doesn't connect
shawnxl said:
I just did a fresh install after flashing the modem you recommended still getting the same thing. I posted screen caps. When a call comes in nothing works or if I place a call it doesn't connect
Click to expand...
Click to collapse
You need to download latest version of rom http://forum.xda-developers.com/showthread.php?t=2517611 there is no need to flash any fixes now they are all built in do a full wipe/factory reset then go to advance wipe and wipe system,cache,data then install zip