Hi to All !!
this is an aplication for make swap in your device but
what is swap?
swapper is an application that uses part of the SD memory to generate more virtual memory and see your performance improve
THIS NO WORK ON STOCK KERNEL YOU NEED UNLOCK BOOTLOADER AND YES THIS WORKS IN CM7 AND CM9 YOU DON'T HAVE TO PARTITION THE SD CARD
instructions to install:
download swapper from here
screenshot
after install the app, launch the app and writes on the white line of what you want your swap, remember that selecting an amount doubles for example: You CHOOSE 300 mb of memory, those 300 will become 600 and 400 to 800 and on
screenshot]
when the swap is this turning takes 5 to 10 minutes and NOT TURN OFF THE SCREEN WHY THE PROCESS CAN LEAVE BAD
remember that you must deactivate the swap to connect the USB cable and then turn it back on, disconnect the phone also restart is disabled, enter only put "deactivate swap" and put "save", then re-enter and to "activate swap "and" save "
also if you have a 4GB SD memory of 300 MB is recommended to 600 if the device is not encouraging, and 8GB of 300 to 800, I use 700 MB for swap and is very fast
before swap
with swap
IF YOU HAVE MINICM9 GO TO SETTINGS - PERFORMANCE - MEMORY MANAGEMENT AND DISABLE ZRAM
sorry for the images.... i don't know how put a preview but is there
That's what I was looking for.
To use this application, I'll need to partition my SD Card?
Sorry for my bad English.
alinefds said:
That's what I was looking for.
To use this application, I'll need to partition my SD Card?
Sorry for my bad English.
Click to expand...
Click to collapse
no, just choose the amount of mb that you used and go!
xperia_pro said:
no, just choose the amount of mb that you used and go!
Click to expand...
Click to collapse
Is there a difference between this mode and another that asks to partition?
And what is the difference between swapper and swapper 2?
Excuse me for asking too many questions, but I'm with many doubts.
alinefds said:
Is there a difference between this mode and another that asks to partition?
And what is the difference between swapper and swapper 2?
Excuse me for asking too many questions, but I'm with many doubts.
Click to expand...
Click to collapse
yes this only is for virtual memory, and the others is for apps to sd
well..... swapper 2 for me is more stable than swapper 2 for me cuases various FC'S
xperia_pro said:
yes this only is for virtual memory, and the others is for apps to sd
well..... swapper 2 for me is more stable than swapper 2 for me cuases various FC'S
Click to expand...
Click to collapse
I think I'm beginning to understand.
Thanks for your help.
alinefds said:
I think I'm beginning to understand.
Thanks for your help.
Click to expand...
Click to collapse
no D: im so sorry i'm refer than swapper is more stable than swapper 2 sorry.. remember if i hlep you press the thanks button
xperia_pro said:
no D: im so sorry i'm refer than swapper is more stable than swapper 2 sorry.. remember if i hlep you press the thanks button
Click to expand...
Click to collapse
Okay, I figured it rs
This work? The Swapper on playstore no work...
Cloulu said:
This work? The Swapper on playstore no work...
Click to expand...
Click to collapse
yes just follow the instructions and see the screenshots
But swap file should have bigger swappiness, "Swapper" gives only 10, which is almost nothing IMO... unless you can find something to activate bigger swappiness (except Swapper 2, it's pain in ass).
Note: You need to disable Compcache/zRAM as those features use swap too, causing conflicts. After enabling swap, make sure to check in some app where you can see memory details that swap is running on your defined size, it might be possible that there's no swap space or that zRAM/Compcache is still active instead.
I don't understand, i activate the swap( like you said) but, my memory free is just 28mb... i make a swap of 512mb( 16gb SD Card)...
Why?
To see if it works you need to type 'free' in terminal emulator. AFAIK swap must be supported by kernel and some custom kernels support it.
making swap using cwm
i am telling you another way of making swap without the swapper app
AND PLEASE MAKE A BACKUP OF YOUR SDCARD ON YOUR PC BEFORE USING THIS METHOD
for this you must have clockworkmod recovery on your phone
just go to cwm recovery by pressing back botton when starting the phone
then go to ‘advance‘ using vol down key and press menu to enter then go to ‘partition sd card‘ and make partition of your choice
to confirm open ‘terminal emulator‘ and write ‘free‘ hit enter
yuppyyy you got
and please make a back of your sd card on computer as this will format your sd card
press the thanks botton if you think i helped you
Tom.K said:
But swap file should have bigger swappiness, "Swapper" gives only 10, which is almost nothing IMO... unless you can find something to activate bigger swappiness (except Swapper 2, it's pain in ass).
Note: You need to disable Compcache/zRAM as those features use swap too, causing conflicts. After enabling swap, make sure to check in some app where you can see memory details that swap is running on your defined size, it might be possible that there's no swap space or that zRAM/Compcache is still active instead.
Click to expand...
Click to collapse
you have all the reason, the app for check is setcpu in info-memory, or terminal emulator typing "free"
Cloulu said:
I don't understand, i activate the swap( like you said) but, my memory free is just 28mb... i make a swap of 512mb( 16gb SD Card)...
Why?
Click to expand...
Click to collapse
use setcpu in INFO--MEMORY and check "swap" and "swapfree", or in terminal emulator typing "free"
this is very nice
keep it up
Does not work with MiniCM7-2.2.0/ nAa-11
Swap size is 0 size in shell "free" command
charos said:
Does not work with MiniCM7-2.2.0/ nAa-11
Swap size is 0 size in shell "free" command
Click to expand...
Click to collapse
In your config you can either use compcache or swap. If you want swap it's easiest to create swap partition via cwm recovery (backup content of sd first!) and disable compcache via cm settngs
charos said:
Does not work with MiniCM7-2.2.0/ nAa-11
Swap size is 0 size in shell "free" command
Click to expand...
Click to collapse
uh? but i tested in minicm7 2.2.0 and works very fine what is the size of your memory and what you put in the line?
Related
so i installed FW S5830XWKPN and flashed cf-root b78 and b80 and also deodexed it with an0nym0us_'s update.zip and when i installed a2sdgui, i can see, SWAP ENABLED. is this for real? or am i seeing a visual bug?
Yes it's true, if you have swap partition on SD card with dtapps2sd installed and enabled in Tweaks. But it's not enough without a kernel with swap support
ketut.kumajaya said:
Yes it's true, if you have swap partition on SD card with dtapps2sd installed and enabled in Tweaks. But it's not enough without a kernel with swap support
Click to expand...
Click to collapse
oh. so the cf-root b80 that you made enabled the swap for us?
EDIT. one more thing master ketut. what do you think is the best swap value? i tried searching and some say it's 60. some say it 10-15. i have a class 10 8gb micro sd with 256mb swap partition. what could you suggest?
Swap run go on newest coderom with b80?
Sent from my GT-S5830 using Tapatalk
joryS5830 said:
Swap run go on newest coderom with b80?
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
can someone tell me what is swap for? I have read some but I dont really get it. Thanks.
BrNoMen said:
can someone tell me what is swap for? I have read some but I dont really get it. Thanks.
Click to expand...
Click to collapse
Swap is an extension of your phone or PC's RAM. That means the linux swap is in a pc, a part of your hard disk will be used as RAM.
So for phones, a part of SD card will be used as RAM. This is good for those who have a class 6+ SD cards.
Yes it's true, if you have swap partition on SD card with dtapps2sd installed and enabled in Tweaks. But it's not enough without a kernel with swap support
Click to expand...
Click to collapse
So does that mean that as long as the kernel itself doesn't support swap, it doesn't matter whether the GUI recognizes the Swap partition since it wont be able to use it anyway?
Which leaves the question, does the CF-Root kernel support Swap?
Tap-a-talked from my Galaxy Ace
What is the ideal size for Swap partition? I have 16GB Micro SD Card (Class 10). Please help.
as far as I know, value of swappiness is set to 0-100. which mean if you set value to 0, the phone will prevent to use your swap, and if you set to 100, your phone will force to use more swap instead your ram. Now I'm using my swappiness to 50
up to you how big partition swap size is. I was checked on A2SD GUI and it's never use >50MB swap. So I think 40-80MB is good enough for you.
sorry for my bad english
When you make partition in your SD card, you must know the maximum size for the partition. I tried to googling it (it's hard to find the best information) and finally, i got informations about it.
(IMPORTANT) For best performance, use SD Card with class 10!
For ext4, it has maximum size 2GB.
For swap, it has maximum size depends on your RAM and multiplied it by 2. ACE has (256MB) so the best swap size is about 400-512MB.
I've tried by myself, i have SDCard 8GB and i make partition for ext4 system 1.8GB and swap size about 496MB and it works fine, i've no problem with my SD Card.
You can check my Customization in this link :
http://forum.xda-developers.com/showthread.php?t=1446992
This thread is just an info. Sorry if this is repost.
PS : If anyone find out the wrong things about the size number, please let me know. Thanks
Regards,
please press THANKS button if this post helped you
Swap shouldn't be used unless you have a godly sdcard
Herpderp Adreno + Tegra.
EmoBoiix3 said:
Swap shouldn't be used unless you have a godly sdcard
Herpderp Adreno + Tegra.
Click to expand...
Click to collapse
Thanks for your info. I just edited the post, more detail about the SD card class that should be use.
Well..Using swap is ok,but some people has had problems with their ace when they used swap partition..So,its recommended not to use it
Prawesome said:
Well..Using swap is ok,but some people has had problems with their ace when they used swap partition..So,its recommended not to use it
Click to expand...
Click to collapse
What kind of problem? I think if you make partition your SD card with right step, there will be no problem about it. So far, this swap function is truly increase my performance.
I think you should say that Swap partition is only for Darktremor script's users because I use S2E tool for moving apps to my SD card instead and I can't use a swap partition in my system!
Also, thank you very much for your info!
gbueno6 said:
I think you should say that Swap partition is only for Darktremor script's users because I use S2E tool for moving apps to my SD card instead and I can't use a swap partition in my system!
Also, thank you very much for your info!
Click to expand...
Click to collapse
when using dtapp2sd and a2sdgui, I can see the swap partition status.
now I am using S2E and freespace, I can not see the swap partition usage. no idea it is used but can not see the status, or it is not used.
Originally Posted by Prawesome
Well..Using swap is ok,but some people has had problems with their ace when they used swap partition..So,its recommended not to use it
Click to expand...
Click to collapse
I have problem stuck on 'ANDROID' http://forum.xda-developers.com/showthread.php?t=1450562. but not sure what cause it
now I have additional problem: Market error 492. and some time it can download, but will restart when installing. some application force close. different application force close after restarting.
Hello, i have PX recovery4. I make partition 2gb ext4 and 256mb swap with px recovery. How to set above 256mb with recovery? How to check swap works?
adamziomal said:
Hello, i have PX recovery4. I make partition 2gb ext4 and 256mb swap with px recovery. How to set above 256mb with recovery? How to check swap works?
Click to expand...
Click to collapse
Hi adamziomal, you could configure and check swap with this free app: Swapper 2 (for Root users) https://play.google.com/store/apps/details?id=lv.n3o.swapper2
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
Hi adamziomal, you could configure and check swap with this free app: Swapper 2 (for Root users) https://play.google.com/store/apps/details?id=lv.n3o.swapper2
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
The app has somehow formatted my phone. :/
gouthamgmv said:
The app has somehow formatted my phone. :/
Click to expand...
Click to collapse
Hi gouthamgmv, I'm using it for more than two years and all goes like a charm.
Sorry for your troubles.
Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
heyguys, most of the time i dont have enough ram when using facebook and messenger or browser, so the launcher closes (although i have ticked keep in memory)
so i want to create a swap partion to have more ram (is that statement correct) ?
pls help me, thx for reply
im using nAa kernel and ROM
OK i already found a tutorial which is working.
http://forum.xda-developers.com/showthread.php?t=1457635
This methos work better than simply use swapper from market?
Sent from my U20i using Tapatalk
cwm based recovery can make swap ext easy
anyone can explain easier ways to make partition and swap than the one explained in the tutorials abovee??
as described above, the easy-way is with cwm... just a bit of buttons pushed
blackkzero said:
as described above, the easy-way is with cwm... just a bit of buttons pushed
Click to expand...
Click to collapse
but you mean for both... swap and partition? with cwm?
in that case, could you explain briefely how to do it and what should i do first? I mean, with my sd card (format it, reflash the new rom after that...)
sorry I'm a bit lost in this things...
And if i did the partitions and i wouldn't be satisfied how may I undo all that?
If its too much to explain here if you knew any page to send me I would apreciate it
thanks!!
yomiguy said:
but you mean for both... swap and partition? with cwm?
in that case, could you explain briefely how to do it and what should i do first? I mean, with my sd card (format it, reflash the new rom after that...)
sorry I'm a bit lost in this things...
And if i did the partitions and i wouldn't be satisfied how may I undo all that?
If its too much to explain here if you knew any page to send me I would apreciate it
thanks!!
Click to expand...
Click to collapse
First and always and most importantly. Prepare. That means making backups and preparing yourself for the possibility of losing your sd card or phone .
Steps:
1. copy contents of sd card to computer. you will lose the data stored on your sd card by doing this.
2. reboot to recovery
3. go to advanced
4. go to patition sd card
5. choose how much for the sd-ext size
6. choose how much will go to swap size(usually half of the ext size)
7. reboot phone
8. wait for a while
9. copy contents from pc to sd card
10. enjoy
demoniacs said:
First and always and most importantly. Prepare. That means making backups and preparing yourself for the possibility of losing your sd card or phone .
Steps:
1. copy contents of sd card to computer. you will lose the data stored on your sd card by doing this.
2. reboot to recovery
3. go to advanced
4. go to patition sd card
5. choose how much for the sd-ext size
6. choose how much will go to swap size(usually half of the ext size)
7. reboot phone
8. wait for a while
9. copy contents from pc to sd card
10. enjoy
Click to expand...
Click to collapse
thx for ur explanation!! but how much is recommended for each one ext and swap? and where do i recopy in sd card all the things i copied before in computer because i guess i would see my sd card with different parts when getting it into computer... and last one i promise may i go back to my sd card original way without partitions? in that case how?
thx!!
depends really on your sd card. for swap i took about a third of my ext size. recopy it to your sd card. your computer wont show you the ext and swap size anyway. to go back it will be the same way.
demoniacs said:
depends really on your sd card. for swap i took about a third of my ext size. recopy it to your sd card. your computer wont show you the ext and swap size anyway. to go back it will be the same way.
Click to expand...
Click to collapse
ohh! i feel so noob at this... i have 8gb sd card class 6... how much would u assign to partition and how much to swap?
sorry i hope to stop boring u soon!
yomiguy said:
ohh! i feel so noob at this... i have 8gb sd card class 6... how much would u assign to partition and how much to swap?
sorry i hope to stop boring u soon!
Click to expand...
Click to collapse
512mb to ext3
256 to swap.
thats my configuration, you can alter it, but dont use ext3 partition more than 1gb. causes instability.
th3discodancer said:
512mb to ext3
256 to swap.
thats my configuration, you can alter it, but dont use ext3 partition more than 1gb. causes instability.
Click to expand...
Click to collapse
thx! i will try as soon as i have a moment and will tell about
ohhh!! one last thing!!! when I do everything you people say... I install my apps like I usually do without moving anything to sd card because they will be installed in my partitions? or do I have to move anything to those ext3 or swap partitions? thx!!
yomiguy said:
ohhh!! one last thing!!! when I do everything you people say... I install my apps like I usually do without moving anything to sd card because they will be installed in my partitions? or do I have to move anything to those ext3 or swap partitions? thx!!
Click to expand...
Click to collapse
depends on your settings.
1. CM settings
2. Application
3. Check allow app moving
4. Install location
5. Choose external so it automatically sends it to sd card
demoniacs said:
depends on your settings.
1. CM settings
2. Application
3. Check allow app moving
4. Install location
5. Choose external so it automatically sends it to sd card
Click to expand...
Click to collapse
once more thanks!! Ive done it and now ill recopy all my apps!! lets see my incoming to partitions world!!
demoniacs said:
depends on your settings.
1. CM settings
2. Application
3. Check allow app moving
4. Install location
5. Choose external so it automatically sends it to sd card
Click to expand...
Click to collapse
Hi demoniacs!! I wanted to tell you it defenitely worked!! I'm astonished how wonderful my phone is now!!
But I must tell you forgot to tell me to activate a2sd so when I did it as you told me, I didnt see any difference with native moving...
Finally I found the way to activate a2sd in minicm7 development thread, by Ferotakis, going to Cm settings, performance...and when I restored my apps with titanium backup I could see that everything was moved to sdext!!! thx gooddd!!! I could do it!!!
Now my phone has full of space for more apps, more free mb of RAM, and I'm very happy!!!
so thanks for your help!!
if anyone keeps wanting to do this partition and swap this thread is awsome!!
ohh!! to complete demoniacs instructions I want to put here Ferotakis instructions too, to activate our ext and swap partition to let our apps to move to sd card enjoy your phone people!!
1. Format SD and partiton it with CWM on phone make yor ext part and swap (I must say I put demoniacs advice:512mb for ext, 256 for swap) if yo want swap ig not live it 0
2. Install this lovely rom
3. Go to CM seting under performance put the a2sd (first show none till reboot)
4. Go to CM then hit apps and tick the "allow app moving to external "
5. Open terminal and type free
6. Go to CM again then performance again then to a2sd and chek there must no say NONE and must be a2sd
7. Install some apps then rootexplorer and browse in root dir on your phone you will saw ext folder open it and look your apps will be there
8. Thanks again if you missed to NAa
9. Learn some Linux
10. Go outside and show your fr and bbf your amazing phone
Please tell me some ram tweaks my phone is xperia x10 mini pro(u20i)
kkkhattak said:
Please tell me some ram tweaks my phone is xperia x10 mini pro(u20i)
Click to expand...
Click to collapse
I use ram manager pro and it optimize your ram memory a lot, besides deleting all useless apps from your system and making your sd partition and swap partition...
yomiguy said:
I use ram manager pro and it optimize your ram memory a lot, besides deleting all useless apps from your system and making your sd partition and swap partition...
Click to expand...
Click to collapse
@yomiguy can u provide links on making sd card partition and swap
And wil this swap work on 2gb sdcard(i got it wen I took my mini pro)
yomiguy said:
I use ram manager pro and it optimize your ram memory a lot, besides deleting all useless apps from your system and making your sd partition and swap partition...
Click to expand...
Click to collapse
How to sd partition and swap partition on 4gb sd card
Sent from my U20i using xda premium
first of all i must say i read once its better to have a high class sd card, for example class 6, it doesn't matter the space, its more important the class because higher class higher speed.
i must say i have a 8 gb sd class 6 and i have brilliant performance.
so if you have smaller class u can try but i can't tell u it will work perfect because i don't know.
about the way you can do it look for it in matmutant faq because he posted an easy tutorial explained by a guy called ferotakis i think...
look for it and if u find it let me know. if not i will try to explain here or will look it for you...
U mean the RBAP thread by matmutant...?
Yashu1019 said:
U mean the RBAP thread by matmutant...?
Click to expand...
Click to collapse
yeah! thats it! look there for the way to use app2sd and you will see a short tutorial by ferotakis on how to do the partition. after that look in post 3 of that page also because there is a list of useless apps u can delete to increase your memory and RAM.
Thanx buddx..
yomiguy said:
I use ram manager pro and it optimize your ram memory a lot, besides deleting all useless apps from your system and making your sd partition and swap partition...
Click to expand...
Click to collapse
i think it easier to use move to sd.
sahniana said:
i think it easier to use move to sd.
Click to expand...
Click to collapse
aps2sd is not difficult at all. it depends on how many apps u will install in ur phone. if u install a lot u should use aps2sd if not u can use native move to sd. the difference is native always leave a part of the apps in the inside memory and app2sd moves the whole ap. I've used both and considering i usually install a lot of apps I've had much better results with app2sd. now its up to you
but everything is well explained in matmutant faq.
i install android 4.0.4 bulid num .587
root it
how to can increase rom?
u can't.
hamed_forum said:
i install android 4.0.4 bulid num .587
root it
how to can increase rom?
Click to expand...
Click to collapse
you cant...
but try an other rom....
__________________________________________________________________________-
Phone- Sony Ericsson Live With Walkman WT19i
Rom- Viper Xperia 6.0
kernel- Lupus v5.0
IF I HELPED DO PRESS THANKS
You can't increase ram or internel storage.
But you can create ext partition and link apps there via link2SD
And you may try to use swap partition if you want.
Sent from my ST15i using xda app-developers app
Mysteryagr said:
You can't increase ram or internel storage.
But you can create ext partition and link apps there via link2SD
And you may try to use swap partition if you want.
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
you think this work is good?
hamed_forum said:
you think this work is good?
Click to expand...
Click to collapse
Yes, follow the instructions on http://www.link2sd.info/description
:good:
Of course you can
Just go to this website
Regards
N
i have 8gig memory whats your recommand?1 gig fat 7gig ext3?
which better
hamed_forum said:
i have 8gig memory whats your recommand?1 gig fat 7gig ext3?
which better
Click to expand...
Click to collapse
ext3 partition, I use 250 MB is enough beside the internal memory
Mysteryagr said:
ext3 partition, I use 250 MB is enough beside the internal memory
Click to expand...
Click to collapse
thank you use 250 fat and other ext3 ?
swap 0?
hamed_forum said:
thank you use 250 fat and other ext3 ?
swap 0?
Click to expand...
Click to collapse
i use ext-sd partition here put my apps
hamed_forum said:
thank you use 250 fat and other ext3 ?
swap 0?
Click to expand...
Click to collapse
Man. it is so easy.
Just create a small ext3 partition to link your apps there.
You need your SD card to be fat primary partition ( except some MBs to be ext3 partition. )
Use mini tool partition wizard or do it from the recovery which will be easier for you.
and swap is not so important , set it to zero if you want.
27gb fat32 1gb for ext2.. Fast as hell and heaven.. I got 270-300++ internal memory.. 200mb ram.. Feel like trying swap but i scared my sd dead.. Hoho
Sent from my LWW. Cheers, Its Legend, wait for it, DARY!
Mysteryagr said:
Man. it is so easy.
Just create a small ext3 partition to link your apps there.
You need your SD card to be fat primary partition ( except some MBs to be ext3 partition. )
Use mini tool partition wizard or do it from the recovery which will be easier for you.
and swap is not so important , set it to zero if you want.
Click to expand...
Click to collapse
is 256 mb enough for ext3?
i have 8gig memory
i install recovery from recovery menu can partion memory
hamed_forum said:
is 256 mb enough for ext3?
i have 8gig memory
i install recovery from recovery menu can partion memory
Click to expand...
Click to collapse
Hmmm....you need to make 3 partition for your SD card if you want to use swap.....
First partition is FAT32 (must be primary) this partition is for your main storage....
Second partition is ext2,ext3 or ext 4 (must be primary) this partition is for install apps that link using link2SD or Mount2SD....
Third partition is Linux Swap....this partition is for swap (increase ram/performances)
Now all partition size you will make is depend on how you want it....basically 256mb for linux swap is enough but 512mb is recommended is you have SD sizes 16GB and above....for second partition 1GB is enough for installing apps....if you planing to install plenty of apps then 2GB is recommended only if you SD sizes is 16GB and above....for the first partition is what sizes left after your make all partition needed....
remember Swap will not be available right after you have partition is....you need swap scripts to make is available....
Can i add ext 3 without formatting my sd??? Coz i just created fat32 and ext2 last month.. And theres alot of files.. And my pc is slow like hell when format.. So can i simply add ext3 now????? Reply asap!
Sent from my LWW. Cheers, Its Legend, wait for it, DARY!
alvster said:
Can i add ext 3 without formatting my sd??? Coz i just created fat32 and ext2 last month.. And theres alot of files.. And my pc is slow like hell when format.. So can i simply add ext3 now????? Reply asap!
Sent from my LWW. Cheers, Its Legend, wait for it, DARY!
Click to expand...
Click to collapse
Nope.....you SD need to be formatted if you want to add other partition...beside adding partition means that your main partition (FAT32) sizes will be reduces...
Sent from my Xperia Mini Pro using Tapatalk 4 Beta
Of course you can increase ram performance by increasing swap and can increase your internal storage by partitioning your sd card, but might decrease the read or write speed of your system as sd card is not as fast as internal memory of your phone
For detailed information just google around
Sent from my WT19i using xda app-developers app
hope can help u
first SORRY FOR MY BAD ENGLISH . lol
im never login this account since 2 years ago.
to increase phone memory u can use application "LINK2SD" but, before u use it, i recommend u to make additional partition with ext2/4.
to increase ram maybe u can use with virtual ram. It not give big differents but for games it would be better.
i have MANUAL step to increase virtual memory ( such as adding secondary ram)
1. Download swap file ww*w.media*fire.c*om/?7pszmgi85sucuuc. Remove * . The password is "crescendo"
2. Extract it so from 800kb will be 800mb eace
3. Choose 1 from 3 files size for swap that u want ( up to you )
4. Copy file to /sdcard
5. U can type on "Terminal Emulator"
for example im using with 256mb size :
- to turned on swap
su
swapON sdcard/swap256
- to turned off swap
su
swapOFF sdcard/swap256
-) the green number can be changed and adjust it with size u want.
sorry if u dnt undestand. i cnt speak english well. lol
If I Helped U Dont Forget To Press Thanks
how to upgrade gpu on ADRENO,SNAPDRAGON,POWERVR,NVIDIA TEGRA,QUALCOMM, etc?
wth