I need help, I have been trying this for 2 days now
to start, I set my phone back to stock
Unlocked with the HTC Dev method
fastboot flash unlocktoken Unlock_code.bin
fastboot flash recovery recovery.img (twrp)
install superuser from zip
fastboot flash recovery recovery.img
modified superwipe
fastboot flash recovery recovery.img
install viperROM from zip
reboot
Cannot get past the HTC boot screen
can anyone help me?
I have been able to root in the past, I had rooted to ics-deck a few months ago and have rooted to other Gingerbread ROMs but have not been able to get any of the new ICS roms to work for me since the leak.
Here is how i fixed that problem
First, download flash image GUI from the market. Go into the app and hit flash kernel. Then browse your SD card for the VIPERrom IC3D zip and flash the kernel from it. The app will tell you the zip file is too big to just be a kernel but it will say that if the file is a Rom that it will find the kernel and flash only the kernel. The it will give you the option to reboot into recovery. Then reboot in recover, and I used TWRP. Flash the VIPERrom IC3D zip. I had the same problem ad I learned to do this before with a gingerbread rom. I guess it is because the VIPERrom is not compatible with the gingerbread kernel so it refuses to boot. Trust me, this should work it did for me.
I have almost the same problem - I Installed the viperROM IC3D Beta 3 and everything appeared to be fine. The phone keeps rebooting into the viper Splash Screen and then reboots continuously - it won't stop. I tried pulling the battery after about 6 reboots - still doing it - HELP!
check my sig.. link to my devhost.. kernels uploaded there.. if u need them..
I also flashed this rom and it just keeps rebooting, can someone help me out pls?
They will answer your questions in the thread.
Sent from my PG86100 using xda premium
Be more helpful!
mrlakadaddy said:
They will answer your questions in the thread.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
You do realize that none of these people have enough posts to post in the dev thread, right? As for the other posters, most people who are 1.50 S-ON have troubles because of the kernel. Flashing Chad's kernel is the only way I know that works, but even that doesn't always work.
Then message Vince or il duce, they will answer
Sent from my PG86100 using xda premium
Related
So I was walking my girlfriend through rooting her new Evo3D, and we couldn't get the phone to get past the 'MI' logo, so I figured it was a kernel thing. After four kernels and two versions of MIUI I realized that it wasn't the issue, it was the hboot.
She didn't back up, she has only had it since last night. I now know what I need to do to flash the ROM, but how can I get her back to stock so I can get the app needed?
Any help?
She has HBOOT 1.5, right?
Go back to the folder where you did all the rooting. Get the stock MIUI kernel (boot.img from the flashable zip) and place it in that folder. Open up a cmd and navigate to that folder.
Boot her phone into fastboot mode. (Vol down + power while the phone is off. Hit power button to select fastboot once it goes into bootloader) Plug the phone into the computer via USB
Type 'fastboot flash boot boot.img' in the kernel. If it successfully flashes, you are done! MIUI should boot up now that it has the appropriate kernel. You will need to do this for any ROM you flash.
As long as you have a recovery, just flash whatever rom you want through fastboot and the kernel will stick.
Or just download a stock rooted rom and flash that the same way you just tried to flash MIUI. It will work since you still have the original kernel.
Sent from my PG86100 using XDA App
flonker said:
As long as you have a recovery, just flash whatever rom you want through fastboot and the kernel will stick.
Or just download a stock rooted rom and flash that the same way you just tried to flash MIUI. It will work since you still have the original kernel.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well, ROM's cant be flashed through fastboot. The ROM is flashed through recovery. Then you go to fastboot and flash the kernel with my guide above. After that, everything should be working fine.
yousefak said:
She has HBOOT 1.5, right?
Go back to the folder where you did all the rooting. Get the stock MIUI kernel (boot.img from the flashable zip) and place it in that folder. Open up a cmd and navigate to that folder.
Boot her phone into fastboot mode. (Vol down + power while the phone is off. Hit power button to select fastboot once it goes into bootloader) Plug the phone into the computer via USB
Type 'fastboot flash boot boot.img' in the kernel. If it successfully flashes, you are done! MIUI should boot up now that it has the appropriate kernel. You will need to do this for any ROM you flash.
Click to expand...
Click to collapse
Hopefully this works! Shes at church right now but I will have her do this ASAP and I'll report back!
(Awesome response time BTW)
Roms are flashed through fastboot just by loading your recovery into fastboot.
I never flash roms and kernels separately. Just go into fastboot, load your recovery, and flash as you normally would.
Sent from my PG86100 using XDA App
I had something similar when flashing MIUI. if you boot the recovery.img from fastboot it should work. you may want to re download just in case of a bad download.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I'm having the same problem as epicchase. have attempted to flash miui many times. at first i tried to do it through my recovery. it didn't work. then i tried to use the fast boot method and flash it from the recovery that i opened from fast boot. i'm quite frustrated. it just wont boot miui, is it the kernel, i'm new to rooting in general but i think i know what i'm doing. i have spent who knows how many hours trying everything i can. i tried flashing the boot.img and the ROM separately. I have successively flashed android revolution hd, but that's no fun, its nearly the same as the stock ROM any suggestions would be appreciated. it boots but i guess it must be a boot loop but idk all i know is it freezes in the middle of the boot animation.
ps. i am rooted using the htc official method (unfortunately) and am s-on)
redstrike120 said:
I'm having the same problem as epicchase. have attempted to flash miui many times. at first i tried to do it through my recovery. it didn't work. then i tried to use the fast boot method and flash it from the recovery that i opened from fast boot. i'm quite frustrated. it just wont boot miui, is it the kernel, i'm new to rooting in general but i think i know what i'm doing. i have spent who knows how many hours trying everything i can. i tried flashing the boot.img and the ROM separately. I have successively flashed android revolution hd, but that's no fun, its nearly the same as the stock ROM any suggestions would be appreciated. it boots but i guess it must be a boot loop but idk all i know is it freezes in the middle of the boot animation.
ps. i am rooted using the htc official method (unfortunately) and am s-on)
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Twolazyg said:
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Click to expand...
Click to collapse
I will try that tonight thanks very much in advance
Sent from my PG86100 using XDA App
Twolazyg said:
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Click to expand...
Click to collapse
well it didn't work it did the same exact thing. I've been giving it about 10 mins to attempt to boot is that long enough? I'm new to non sense roms I've only ever used sense, is there something I'm forgetting to do that is different for non sense roms. *frustration* (and i thought i was beginning to understand this)
---------- Post added at 09:43 PM ---------- Previous post was at 08:46 PM ----------
okay well i tried to flash cyanogenmod 7 still no dice. I must be an idiot, sorry for being a noob.
this is what im doing.
im placing the .zip on root of my sd card. then opening my cmd.
i then type " cd c:\android" (i saved the recovery image in a folder named android) it says
"c:\android" just as it should i then type "fastboot boot recovery.img"
it restarts my phone in recovery
i press install .zip from sd card then click wipe cache and dalvik cache it goes and does its work
i then select the superwipe.zip it says flash compete however it says error or something but i just kind of ignored it.
i then select my miui.zip that i got from www.miui.us
i then select install .zip files the first thing that comes up is "md5 check fail- ignoring" and the continues and flashes (i have no clue what that part means but i continue anyway)
i select reboot and it starts to boot my phone i get the white screen with green htc.
i then get the miui boot animation for anywhere from 2-5 seconds and then it freezes.
i sit and nearly just stare at it and the clock. i wait at least 5 mins but have waited up to 30 mins.
the boot animation never restarts i just freezes there making me think it is not a boot loop (however the definition of an actual bootloop is slightly vague to me.)
anyway thanks for reading and if you have any suggestions i will be very happy for now im just gonna run my android revolution hd rom.
If superwipe isn't working, fastboot to recovery, go to the wipe menu, not install a zip, wipe dalvik, cache, and factory reset. Don't do the factory reset in android, do it in recovery. I'm guessing you got a corrupt download of superwipe, I would redownload it and try it again if I were you.
Try using this one.
Twolazyg said:
If superwipe isn't working, fastboot to recovery, go to the wipe menu, not install a zip, wipe dalvik, cache, and factory reset. Don't do the factory reset in android, do it in recovery. I'm guessing you got a corrupt download of superwipe, I would redownload it and try it again if I were you.
Try using this one.
Click to expand...
Click to collapse
Yayyyy perfect thankyou sooooo much I'm speechless thank you so much!!! it flashed like it was mardi gras.
Sent from my HTC EVO 3D using XDA App
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
rcquartz said:
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
Click to expand...
Click to collapse
What didn't work for you?
rcquartz said:
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
Click to expand...
Click to collapse
make sure your phone is actually rooted if it is hboot 1.5 make sure to use htvdev.com
make sure you have a recovery image
i have recently unlocked my 3d via the htc method. I had viper rom and the stock kernel on the phone. I tried to install a new kernel(anthrax infected v9). I wiped the cache and the dalvik prior to installing the kernel, post install.zip the phone is in a continuous loop. Performed wipe of all data. Tried flashing rom and kernel again, it failed again. Asked a couple of friends what might be causing this. Found out my phone has hboot 1.5 that requires flash through fastboot. How do i fix this, please help.
Need to boot in recovery with ADB or GUI app
Sent from my PG86100 using XDA Premium App
Get into fastboot by taking out battery then [power+volume down] till it loads. Once there connect to computer and use adb and type "fastboot boot recovery.img" where recovery is the name of your chosen recovery. The recovery file must be in the same folder as the adb.
Once in recovery you can flash anything. Once you have booted a ROM I would recommend downloading flash image gui from the Market and use it to flash kernels or ROM with custom kernel. Good luck. hboot 1.50 makes things just a bit more trickier.
Recovery file could be any where you want "!
Sent from my PG86100 using XDA Premium App
przfghtr said:
i have recently unlocked my 3d via the htc method. I had viper rom and the stock kernel on the phone. I tried to install a new kernel(anthrax infected v9). I wiped the cache and the dalvik prior to installing the kernel, post install.zip the phone is in a continuous loop. Performed wipe of all data. Tried flashing rom and kernel again, it failed again. Asked a couple of friends what might be causing this. Found out my phone has hboot 1.5 that requires flash through fastboot. How do i fix this, please help.
Click to expand...
Click to collapse
NOTE: If you took the latest 651.5 update, you have to stick with kernels that have that as a base (for now).
You are likely not flashing the kernel/rom correctly. See the Guide/flashing notes in my signature for a walkthru that will likely help.
I have a similar situation. Had viper rom up and running and then it just up and quit and now it's in a continual boot loop. I'm no where near a windows CPU that I can use fastboot for the next 40 days. How can i fix with my tablet?
Sent from my Transformer TF101 using Tapatalk
Go to the library ? Rent a pc ?
Sent from my PG86100 using XDA Premium App
So in other words I'm screwed? Isn't there a way to use my tablet running android to push the boot image to the phone?
Sent from my Transformer TF101 using Tapatalk
HELLO GUYS
MY HTC EVO 3D GSM CAN ROOT TO mwakious3Drom® ?
i is S-on unlock.
I Yesterday try root mwakious3Drom®,but after Unlimited reboot,in the mwakious3Drom® System logo boot Screen.
need to s-off can root mwakious3Drom®?
s-on can not root mwakious3Drom®?
very so sorry.i am English so bad.
so sorry,i can not Replies, so open New posts,very so sorry.
i Just want to Know Reason and Solve my Problem.
Thank you.
I am s-on running mwakious v11.2
Make sure u are using 4ext recovery with smartflash on
First install the base v11 rom with smartflash on
Reboot phone, let it load up once
Go back to recovery
Turn off smartflash
Install v11.1
Clear cache +dalvik
Reboot
Go back to recovery, check smarflash is off then install v11.2
Wipe cache + dalvik
DONE!!
Enjoy the new ROM
Sent from my HTC EVO 3D X515m using xda app-developers app
sgaheer said:
I am s-on running mwakious v11.2
Make sure u are using 4ext recovery with smartflash on
First install the base v11 rom with smartflash on
Reboot phone, let it load up once
Go back to recovery
Turn off smartflash
Install v11.1
Clear cache +dalvik
Reboot
Go back to recovery, check smarflash is off then install v11.2
Wipe cache + dalvik
DONE!!
Enjoy the new ROM
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
not need flash boot.img? thank you!
i am using rec..cwm 4.0.1.4.
i now try install 4ext.
if i Complete root v11,but now not V11.1..can install v11.2?
i don't know install Mwakious ROM ,i install after fastboot flash boot boot.img after boot black Screen and Unlimited reboot.
help me Everyone i need your Help. thank you very much!
Just try to install a 4ext recovery, mate..
Then you can try to flashing mwakious rom again.. Let us know if you still can't fix it..
Sent from my HTC EVO 3D X515m using Tapatalk 2
Hey, I'm getting similar results with s-on unlocked.
Using 4ext recovery control, flash the v11 rom (superwipe), goes into bootloader, installs, warns about boot change, reboots.
From then on it loops the HTC splash, black screen with the buttons backlight, reboot.
Flashing the boot.img using fastboot doesn't make a difference.
Any ideas?
DaveL88 said:
Hey, I'm getting similar results with s-on unlocked.
Using 4ext recovery control, flash the v11 rom (superwipe), goes into bootloader, installs, warns about boot change, reboots.
From then on it loops the HTC splash, black screen with the buttons backlight, reboot.
Flashing the boot.img using fastboot doesn't make a difference.
Any ideas?
Click to expand...
Click to collapse
You may need to go S-OFF as well.
Otherwise, try a different ROM.
If you want to stay S-ON, I can recommend the KingCobra V1.2 or V1.5 ICS ROM.
Both are stable. V1.2 still has beats support, V1.5 is a newer version.
However, V1.6 won't work since you're S-ON.
Good Luck!
DaveL88 said:
Hey, I'm getting similar results with s-on unlocked.
Using 4ext recovery control, flash the v11 rom (superwipe), goes into bootloader, installs, warns about boot change, reboots.
From then on it loops the HTC splash, black screen with the buttons backlight, reboot.
Flashing the boot.img using fastboot doesn't make a difference.
Any ideas?
Click to expand...
Click to collapse
Read carefully my previous post,
Flash the v11 base ROM with SMARTFLASH ON!
let it reboot
Boot back to recovery
Flash v11.1 update with SMARTFLASH OFF!
wipe cache and dalvik
Reboot
Reboot into recovery
Flash v11.2 update with SMARTFLASH OFF!
reboot
Done
REMEMBER THAT SMARTFLASH MUST BE OFF FOR THE UPDATES
I ran into the same problem and this method fixed it
Sent from my HTC EVO 3D X515m using xda app-developers app
saiku1314 said:
not need flash boot.img? thank you!
i am using rec..cwm 4.0.1.4.
i now try install 4ext.
if i Complete root v11,but now not V11.1..can install v11.2?
i don't know install Mwakious ROM ,i install after fastboot flash boot boot.img after boot black Screen and Unlimited reboot.
help me Everyone i need your Help. thank you very much!
Click to expand...
Click to collapse
Read my previous post carefully and follow every step
make sure that u have the latest 4EXT RECOVERY
You do NOT need to flash boot. Img when using 4ext
Sent from my HTC EVO 3D X515m using xda app-developers app
thank you everybody.
what is smartflash.i Original not smarflash.
i Clear cache +dalvik > install mwakiousV11 > flash boot.img after boot black Screen and Unlimited reboot.
i Clear cache +dalvik > install mwakiousV11 > reboot > not Signal not wifi >UP V,11,2 >go to screen after not respond in screen.
i have install radio for 11.77.3504.00P_11.25.3504.06_M from official release 3.28.707.
i install after reboot,install rom.↑
but,i don't not smartflash this is what,i Thought install 4ext recovery On Success.:<
Again thank everybody!:laugh:
i try Look for Teaching. if Brothers in the here,Hope give me link!
MR.DjDom i try look for you say your rom. thank you and everybody the help!
how SmartFlash off it.
saiku1314 said:
thank you everybody.
what is smartflash.i Original not smarflash.
i Clear cache +dalvik > install mwakiousV11 > flash boot.img after boot black Screen and Unlimited reboot.
i Clear cache +dalvik > install mwakiousV11 > reboot > not Signal not wifi >UP V,11,2 >go to screen after not respond in screen.
i have install radio for 11.77.3504.00P_11.25.3504.06_M from official release 3.28.707.
i install after reboot,install rom.↑
but,i don't not smartflash this is what,i Thought install 4ext recovery On Success.:<
Again thank everybody!:laugh:
i try Look for Teaching. if Brothers in the here,Hope give me link!
MR.DjDom i try look for you say your rom. thank you and everybody the help!
how SmartFlash off it.
Click to expand...
Click to collapse
Good to hear that it all worked out for you!
If you have anymore questions, feel free to ask.
i give up this rom.:<
DjDom and everybody have Stable rom Introduction?
i installX Series] Virtuous Eclipse sense 4.0 No problem.
only mwakious3Drom® Have a problem.:<:<:<:<:<:<:<
i need Stable rom Hope have Brothers Introduction give me.
thank you very much everybody!good guys!
saiku1314 said:
i give up this rom.:<
DjDom and everybody have Stable rom Introduction?
i installX Series] Virtuous Eclipse sense 4.0 No problem.
only mwakious3Drom® Have a problem.:<:<:<:<:<:<:<
i need Stable rom Hope have Brothers Introduction give me.
thank you very much everybody!good guys!
Click to expand...
Click to collapse
Here's the ROM I'm using: http://forum.xda-developers.com/showthread.php?t=1647674
It's KingCobraICS.
However, download version 1.2 or 1.5.
1.6 will NOT work if you are S-ON.
If you want Beats audio, download version 1.2.
If you want the latest S-ON version, download 1.5.
This ROM is very stable and I've been using it for a long time!
i tyr sgaheer Provide Method Also can not!
i Really give up.i Decide install DjDom Introduction OF ROM!
saiku1314 said:
i tyr sgaheer Provide Method Also can not!
i Really give up.i Decide install DjDom Introduction OF ROM!
Click to expand...
Click to collapse
Another possible fix
Download mwakious rom v7 base
Once downloaded get the boot. Img from the folder
After using previous steps to get up to v11.2
Use the fastboot flash boot boot.img command (cant remember if this is the exact command just check to make sure) to flash the boot from v7.
This is the last method i can think of hopefully u can get this rom running or you could just stick with whichever other one you chose
Sent from my HTC EVO 3D X515m using xda app-developers app
DjDom said:
Good to hear that it all worked out for you!
If you have anymore questions, feel free to ask.
Click to expand...
Click to collapse
1.6 s-on Forever can not Use?
i Would like to Latest ROM!
Because,Latest ROM will Compare GOOD!
BUT,I am hboot 149.0012 can not Demote!:< ( MY HTC EVO 3d Come from HKONG KONG)
I Again thank you
i Success UP FOR 1.5 THANK YOU!!!!!!:>
but not htc sense AND Theme.. (Resolved)
i Tomorrow Again try install mwakious3d!THANK YOU!
Everyone i would like try Again flash mwakious3Drom® ,but i would like Everyone can Tell me flash Step to me.(Detailed)
I hope to know what is wrong here.
Thank you very much and everyone!
i English is so bad.if have Offend i am very sorry!
Thank you!
sgaheer said:
Another possible fix
Download mwakious rom v7 base
Once downloaded get the boot. Img from the folder
After using previous steps to get up to v11.2
Use the fastboot flash boot boot.img command (cant remember if this is the exact command just check to make sure) to flash the boot from v7.
This is the last method i can think of hopefully u can get this rom running or you could just stick with whichever other one you chose
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
^ This. If you can't boot v11, then do this method. So flash v11 and then v11.2 and use the boot.img from v7 and flash it with fastboot. It will work without a problem. Worked for me. But remeber to turn off smartflash when u flash v11.
raZr0708 said:
^ This. If you can't boot v11, then do this method. So flash v11 and then v11.2 and use the boot.img from v7 and flash it with fastboot. It will work without a problem. Worked for me. But remeber to turn off smartflash when u flash v11.
Click to expand...
Click to collapse
thank you very much!
i Success install mwakious ^_^!(FOR NOW)
i use Super Wipe after install mwakious .
i use 4eX Recovery Touch V1.0.0.5 RC5
need flash boot.img?
but i up for v11.2 Did not respond in The main screen.............(reboot after Back to normal wifi can not...)
flash boot.img after Unlimited reboot...
i flash v7 boot.img is No problem,but first boot would stop the screen...(i would Continue test)
but why flash v11 boot.img can not Normal use...(Because i'm is s-on unlock?)
i flash v7 boot.img,now need to flash v11 boot.img?
_____________________________________________________________________
Quickly up for 11v3 ..i flash v11.3 need use super wipe?
v11 latest Firmware/Radio already Installed? i Baseband is 10.55.9020.00p_10.13.9020.29_m
i put PG86IMG save in the sd card .into the bootloader but not give me Select yes or not upgrade...
me is s-on unlock...
Hello everyone, my EVO LTE is currently running MeanRom and I decided to try out CM10. Well, this is when the nightmares started. I downloaded CM10.0.0 stable with 10/11/2012 and 11/30/12 gapps and no matter what I try, CM10 does not boot. It goes to boot animation but it does not ever finish loading. The steps I took.
1. Download Stable CM10.0.0. (I've redownloaded this 3 times to ensure it's a good download.)
2. Download Gapps (versions list above.)
3. Place both zips on my SD card and also tried internal.
4. Boot into TWRP 2.3.1.0
5. Wipe Factory Reset, Wipe System, Wipe Dalvik.
6. Flash both, CM10.0.0 Jewel.zip AND Gapps.
7. Reboot System.
8. Wait countless minutes for it to load, I get to the CM10 boot animation, but it gets stuck rotating.
What am I doing wrong??? My Phone is S-Off. Any ideas?
Did you remember to flash the boot.img from the CM10 .zip file? It's a very common mistake.
Fuzzy Wuzzy said:
Did you remember to flash the boot.img from the CM10 .zip file? It's a very common mistake.
Click to expand...
Click to collapse
Oh man is this seriously all it is. Lmao.
EDIT: Can you link me to this boot.img? The QBking77 video doesn't mention anything about boot.img.
Sent from my SPH-L710 using Tapatalk 2
its in the rom's zip file. doubleclick on zip and you will see boot.img pull it from there onto computer. i have done this as i am on 1.15 but im getting a sync error with my account.
command for fastboot flash
fastboot flash boot "path to wherever your boot.img is at here"
Ascertion said:
Oh man is this seriously all it is. Lmao.
EDIT: Can you link me to this boot.img? The QBking77 video doesn't mention anything about boot.img.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
http://www.andromods.com/basic-how-...stall-htc-evo-4g-lte-android-41-firmware.html
go to the step where it says "Flashing a custom Jelly Bean ROM on HTC Evo 4G LTE"
Could just use flash image GUI. Check the play store.
Sent from my EVO
??
if you are s-off flashing the boot.img first shouldnt matter much.
I flash the rom by using an application called htc dumlock v2, it flashes your recovery to your boot partition, and you flash the second file to restore it to its original location, but its loaded in boot. So it can then alter the boot partition, and flash the rom without needing to flash it beforehand.
But, again im not sure if im mistaken, but i thought if you were s-off you didnt need to do such things.
---------- Post added at 05:15 PM ---------- Previous post was at 05:06 PM ----------
Forget that i found out just now, Why not download the newest nightly? or kushdecks release? I LOVE paranoid android, and it is also currently working great (with cm10 features in it, and a tablet, hybrid, phablet mode for the device)
If you want to continue attempting the stable CM10 your talking about you could always try HTC dumlock v2, as it works pretty well for me and installing things like this.
Have fun with your phone!
Try the superwipe zip from the themes and apps section. If this was a boot.img issue you shouldnt even get to the boot animation, plus your s-off so that shouldn't be an issue.
It sounds like an incomplete wipe or a bad download.
Sent from my EVO using xda premium
Hello,
I was attempting to install Meanbeam.
Evo -LTE of course. I did the back up and the factor wipe then in TWRP, choice install and selected the rom from the sd card. The problem is that it has be "installing" now for about an hour and a half. It appears to be froze.
The last two lines are installing update... and formatting and mounting partition...
S- on. I was attempting to following Mikeys directions for S on phones.
At this point is there anything I can do or just let the phone sit longer?
Thanks
Edit. I was able to get it to abort. (somehow, I am not entirely sure) haha
Were you able to get your issue resolved?
Sent from my EVO using xda premium
If your device is not in an S-Off state, I believe you'll have to flash the MeanBean boot.img booter via the fastboot command. This is what I had to do after achieving an unlocked bootloader and installing a custom recovery, such as TWRP or ClockworkMOD.
SkedAddled said:
If your device is not in an S-Off state, I believe you'll have to flash the MeanBean boot.img booter via the fastboot command. This is what I had to do after achieving an unlocked bootloader and installing a custom recovery, such as TWRP or ClockworkMOD.
Click to expand...
Click to collapse
MeanBean has a kernel installer built in to facilitate ROM flashing when S-on. You have to flash the ROM zip twice, once to flash the ROM, then again to flash the kernel (boot.img).
Sent from my EVO using xda premium
FinZ28 said:
MeanBean has a kernel installer built in to facilitate ROM flashing when S-on. You have to flash the ROM zip twice, once to flash the ROM, then again to flash the kernel (boot.img).
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks Guys.
I was able to get it to cancel out of the stuck install screen, I am not exactly sure what I pushed to get it to that, but.
I had an older version of TWRP.
I rooted a while ago and was just getting around to flashing a new rom.
Once i upgraded to the new TWRP the install went perfectly.