I'm running AOKP build 35 and I have a new and exciting problem with my vibrant. Upon every boot, my internal sd is mounted as "USB Storage." If I plug a usb cable in, sometimes nothing happens, sometimes it displays "disconnect usb" or similar. I've rebooted with usb cable in, usb cable out, nothing. Selecting "disconnect usb storage" does nothing. I can't seem to get it to work!
I tried a recent AOKP. I don't use an sdcard, and it would not use the internal sdcard, so no taking pictures, downloading, etc. I even tried mount -bind and symlink tricks, then went back to CM7 for the time being.
Didn't have any problems with CM9 or ICSSGS.
Related
Hey guys, when my vibrant was stock, and I plug in my usb cable, it would give me 3 choices, (kies, mass storage and something else) I would click mass storage, then mount drive and I would get my phone mounted 100% of the time
then , I rooted and tried axura 2.0.6 and 2.1 both of them changed the mounting procedures, to where i would plug it in, turn on usb storage, then the android turns green. doing this method, my phone would mount some of the times...the other times the android would remain green, and nothing would show up under my computer.
how can i solve this issue?....
I'm having an odd problem... anyone watching this forum knows that I just rooted and flashed a new rom not more than an hr ago.
Obviously I put the roms on via USB mount when it was running the shipped rom, but now after plugging in the usb from the same computer after I select "Turn on USB storage" and select "OK" the android turns orage for about a second and the goes back to green, then the notifications pops up reading "Preparing SD card".
Any ideas?
nvm, tested on another computer, totally the android sdk adb driver getting in the way.
Hello, I have updated to Cyanogenmod 7.1.0. (stable version) and installed gapps on my phone (HTC Legend, rooted) but after that android market didn't work. So I decided to reinstall gapps with recovery thing (vol. down + power button) and after that some strange artefacts started over phone's screen. So, when I power up phone it behaves normally but I can't access my SD card (goldcard) and in settings > storage > is says that "total space" and "available space" are unavailable and I can't press mount SD. When i try to mount my phone via USB cable on pc, only USB debugging pops up and i can't mount my internal or SD card storage. After some time even USB debugger is stopping to work.
I tried to factory reset it but it didn't help. When I plug in my phone i get errors like "Windows has stopped this device because it has reported problems. (Code 43)" or "This device cannot start. (Code 10)". Also, when i shut down my legend and power up it , the first "htc" white screen keeps blinking untill i plug usb cable and then i can normally enter in ROM.
Can you please help me with my problem or do you think that my phone became a brick?
Hi,
Does any of the roms like Cyanogen support USB Host mode?
I am currently using the latest version of the Cyanogen ICS-themed ROM and I tried connecting USB Hard Disks and USB Flash Drives to my Atrix through my (powered) dock but it doesn't work.
Both hard disk and flash drives were formatted to FAT32.
Nothing happens at all when the hard disk is connected.
When the flash drive is connected, it just goes "Preparing SD Card - Checking for errors" in the notification pane. I tried waiting for a while, say 5 minutes but nothing else happens.
I went to /sd-ext and it is empty.
I tried connecting a mouse and keyboard and it works fine though.
Any advice?
I am running CM9 4.5.1 with GApps v12 on an Atrix 4G. The issue I am having is that when I connect via USB cable to my XP system, my PC detects the two sdcards (internal and external) but I can not access either one of them..."Please insert disk into drive" like they are not formatted.
I did find that the external sdcard is now being seen in the phone as folder EMMC and both of them have data so I don't think it is a format issue.
I have tried to connect via USB using the MTP and Mass Storage Option and rebooted the phone both times after the change was made. Neither attempt worked.
I have searched through the forum as best I could but with the CM9 thread pushing 1000 pages, I'm not sure if anyone has come across this. If so, what was done or are there any suggestions out there? Thanks.
Never mind, I figured it out after installing new USB drivers from Moto and trying everything else. Found out it was a simple/stupid oversight on my part. So if this happens to anyone else....
Even though I had Mass Storage enabled in the settings, when I connected the phone via USB to my XP Pro Pc, I had to pull down the notification bar, select USB storage, and turn it ON. I guess by default it is turned off. Once that was done, I am now able to access the sdcards on my PC.
I did find during all of the research and trial/error that the sdcard-ext is now the sdcard and the sdcard is now emmc in the folders. I believe there is a way to change this (xda thread) but I can live with the way it is.