Related
I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6
So I was flashing my phone with odin and I really messed up and accidentally flashed it with the captivate software not the fascinate software the phone would try to turn on and would show the att loading screen and just kept looping to that screen. I tried to put it back in download mode and it wouldnt work so I read that I should let the battery completely die and try again. I did that and now the phone will not power on at all the screen stays black no matter what key combination I press. I tried holding vol+, vol-, and power; I tried vol- and power, i tried both with the cable plugged in before and after a battery pull, and tried them both without it being plugged in before and after a battery pull. the phone is generating some sort of heat so i know the charger is plugged in properly, (i tested the charger with a samsung infuse and it charges fine so i know the charging cable is working properly). So my question is how do i get it back into download mode so I can flash the proper stock software with odin? all help is GREATLY APPRECIATED!!! thank you in advance!
thebrodizzle said:
So I was flashing my phone with odin and I really messed up
Not positive, I've only used Heimdall to change the boot logo, but its good reading and likely has your answers.
http://forum.xda-developers.com/showthread.php?t=1026746
How To Recover Your Fascinate From Any Brick, And Rooting Methods
Sent
Click to expand...
Click to collapse
thank you! im willing to do the work and research and figure it out!! i use a mac so i am familiar with Heimdall! Ill try what it says, Ill post my results. thanks again for your direction and willing to help a newbie
So I carefully read that post, I'm using a fully charged battery from my friends epic phone, I can't get the phone into download mode and what is ever more strange is that when I press the power button when the phone is NOT plugged into a usb port the phone will show the "att world phone" splash screen, and it will loop boot that image over and over. However, whenever I plug it into a usb cable hooked up to a laptop the phone will go back to a blank black screen and stay that way. Then I will push any key seuqence and I can't get the phone into download mode for the life of me anyone know another way to get into download mode on a samsung fascinate accidentally flashed with a samsung captivate firmware? Once again all help is greatly appreciated
Actually I realized the microusb cable I was using didnt come with the fascinate and the port on the fascinate is oddly shaped so the cable I was using wasnt truly connected, so what happens now with a solid connection to a microusb cable the phone goes to the black screen and will stay that way regardless of what key combinations I hold down. I can even pull the battery and put it back in all while being plugged into the computer and the screen stays black however, when I unplug the phone from the microusb cable the phone will immediately show the "att world phone" splash screen, and continue to loop boot back to that splash screen. Its very strange, someone please help
The usb pinouts are fascinate specific, are you using the stock samsung cable?
Find the download mode jig. Normal download mode methods won't work for you anymore that you're on att firmware. If you're lucky, you can fix it.
Well, let's review........so far you flashed captivate software onto your fascinate, then you thought putting the battery from the epic in your phone might help......I think the next step is definitely to see if putting a hard shell case for the vibrant on your phone will help. May as well cover the entire galaxy s line.
On a serious note, listen to imnuts' advice. It's your only chance.
^ lol you're in good hands good luck
2scampy said:
The usb pinouts are fascinate specific, are you using the stock samsung cable?
Click to expand...
Click to collapse
Micro USB is Micro USB unless specified by the manufacturer. Might wanna do some research before you make your fourth post on this forum with false information.
Ouch. http://forum.xda-developers.com/showthread.php?t=819551 fifth time the charm??? Just trying to help...tho if I'm not positive, might oughtta wait on someone who is.
Sent from my SCH-I500 using little discretion.
2scampy said:
Ouch. http://forum.xda-developers.com/showthread.php?t=819551 fifth time the charm??? Just trying to help...tho if I'm not positive, might oughtta wait on someone who is.
Sent from my SCH-I500 using little discretion.
Click to expand...
Click to collapse
That's for putting the phone into download mode, not usage of the Micro USB cable. Yes, the port on the phone side has a specific pinout, but the cable itself doesn't.
Love this site, info abounds... Just saw a thread about manually jumping the pins w/a series of resistors. Common sense, but I'd trust the soldering better than my fingers lol. On a lighter note, I think it was only 3 bad ideas... w/ imnuts and shark, he is in good hands.
hey landshark68, i used the battery from my friends epic because the battery from my fascinate would not charge in my fascinate no matter what, so I had to use another battery to even get the phone to do anything, I'm sure you make a lot of friends assuming that everyone is less intelligent than you
thebrodizzle said:
hey landshark68, i used the battery from my friends epic because the battery from my fascinate would not charge in my fascinate no matter what, so I had to use another battery to even get the phone to do anything, I'm sure you make a lot of friends assuming that everyone is less intelligent than you
Click to expand...
Click to collapse
It was a joke about piecing things together from all the different galaxy s phones.
lol sorry man, its just frustrating that i havent been able to use my phone and it makes me sad sorry to take it out on you
Did you try this to get in download mode: " If you can't get into download mode with your phone plugged into your PC, unplug usb from PC and plug it into the wall outlet, and try to put it into download mode there. When It goes into download mode, unplug usb from adapter, plug it into PC and put it into download mode, This does work."
it doesnt go into download mode no matter what ive tried all different key combinations used for any galaxy phone and it just loops the "att world phone" splash screen, has anyone else ever accidentally flashed a phone with the wrong model's software before? or am i the only one that is that silly lol
Imnuts is right. And Landshark, while sarcastic, is both right AND funny. Google captivate download jig, (evidently this works for all galaxy s models) read some, go to radio shack, get a (or some more likely) resistor(s), make sure they add up to 301 kohm (again, verify w/ xda post on building a jig, going on what I read last night) and hope you didn't flash yourself a mini att billboard.
or buy one on amazon. 9.99 search galaxy dongle jig. Good luck, since you get some boot activity, it looks like there is some hope.
There is a good chance the download mode jig will work for you based on what you have said. However, it is your ONLY option and last resort at this point if the other download mode methods have failed.
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with hemdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
I'm in the same boat and I bought the Jig. However I think Josh just acts as a middle man on this one and shipping is actually from overseas. But you can find it here. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/ I suggest a little extra shipping cost.
However the other suggestion if that is not working (I think I killed my phone) is to have Josh do a Jtag on the phone. You can find that at http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-jtag-brick-repair/
Can you get into download mode? Remove battery, plug usb, press up+down vol buttons and insert battery.
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Monster809 said:
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Click to expand...
Click to collapse
If you can see the Vibrant Samsung screen just use Odin to flash back to stock
Kabiigon said:
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with heimdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
Click to expand...
Click to collapse
The real solution here i doing a JTAG to your phone or make the Unbrickable MOD (It's very dangerous, a person with Welding and electronic skills must do this).
Another thing you can do is buy a broken Screen phone from Ebay (it more cheaply) and change the motherboard!!
My suggestion would be to continue to try to get into Download mode on the phone. My phone was DEAD no life at all plugged into the wall or PC. I kept trying to get it into download mode and magically after hours of failures, ODIN recognized the device! The phone was still DEAD no life at all on the screen but ODIN had recognized that my device WAS indeed connected. So I continued to flash back to stock and as always with a little patience ODIN was there to save me. The phone automatically rebooted after ODIN was done and BOOM! Good2Go
Goodluck!
^^I'm gonna try that and hopefully with some patience it will work. Otherwise I'm also gonna be ordering a jig, they're not that expensive. My problem is the same as the OP's. My vibrant will just not give any signs of life. I was trying to odin to stock from one cosmics ics RC3.1. Wanted to start on a fresh install for AOKP build 25. But then odin decided to fail on modem.bin. then it just hung and phone turned off, haven't been able to turn it on since. I've spent the last two hours trying to put in different combinations and keys and usb attachments to bring any hints of life, but so far nothing. Bootloader update was not checked on odin so I'm pretty confident that its not due to bootloader mismatch but someone correct me if I'm wrong. Sending it back to samsung or tmobile is very far of an option since I've modified the phone to add FFC. If anyone has any advice or hints it would be greatly appreciated. I'm kind of hating myself and flashing now since I was very happy with the rom that I had and how everything was setup. I just wanted to try something new for fun and this went and blew everything up.
^^I literally held down the buttons > plugged in the cord > put in the battery > and counted in my head the amount of seconds it took the phone to "normally" boot to where I would "normally" let go of the power button to get into Download mode, lol I know it sounds ridiculous but that's how I did it. It helped that I had my sisters working Vibrant right there, I used her phone to get into download mode and timed the process and used that as a baseline for the timing of trying to get the "DEAD" Vibrant into download mode.
If all else fails a JTAG as mentioned should fix your problem fosho!
Goodluck!
Ye I fixed it. One day I did what I had been doing the whole time and it just decided to work. Got into download mode then went back to stock. Our phone is so freaking weird yet I love the damn thing. It really is unbrickable. To anyone in this situation just never give up.
Sent from my SGH-T959 using XDA App
Hey everybody. I think this thread is somewhere but I looked and couldnt find any solution for this issue. I have a SGH-i777, rooted and unlocked and all that fun stuff. It was working fine until the other day when I believe the battery was drained all the way (wife's phone, doesn't take care of it). I tried charging it but only thing that would pop up was the battery sign for like 3 seconds and then it would go blank, wouldn't charge. I tried going into download mode and it did so I thought it was just the battery. I bought a battery wall charger and charged it. I then tried to boot the phone but same thing would happen. I tried going into download mode and all it shows is Low battery!! Can't download!! in red. When I plug the phone in to PC or wall, the battery sign pops up and shuts down. Any suggestions of what it could be? Bricked? Motherboard? Battery?
replace the battery..?
Sent from my SGH-I777 using xda premium
cm_narimani said:
Hey everybody. I think this thread is somewhere but I looked and couldnt find any solution for this issue. I have a SGH-i777, rooted and unlocked and all that fun stuff. It was working fine until the other day when I believe the battery was drained all the way (wife's phone, doesn't take care of it). I tried charging it but only thing that would pop up was the battery sign for like 3 seconds and then it would go blank, wouldn't charge. I tried going into download mode and it did so I thought it was just the battery. I bought a battery wall charger and charged it. I then tried to boot the phone but same thing would happen. I tried going into download mode and all it shows is Low battery!! Can't download!! in red. When I plug the phone in to PC or wall, the battery sign pops up and shuts down. Any suggestions of what it could be? Bricked? Motherboard? Battery?
Click to expand...
Click to collapse
It sounds like a problem that I had which ended up being a USB charging port and I was in a battery boot loop and also was not able to get into download mode.first I bought a USB jig which forces you into download mode and the USB charger port which got my phone out of that horrible battery boot loop. And with no experience at all I ended up changing the USB charger port its very easy just look up video on utube.I hope this helps you and here's so pics of the stuff I bought
Sent from my SGH-I777 using Tapatalk 2
It could be the charging port, but I forgot to mention that I tried with a different battery after having it on a separate battery wall charger and it still gives me the same issue. Well actually now, the previous battery I had doesn't even let me go into download mode or shows any signs of power. The replacement battery that I am trying does show some sign of life by trying to go into download mode, but giving me the "Battery low!!, Can't Download".
cm_narimani said:
It could be the charging port, but I forgot to mention that I tried with a different battery after having it on a separate battery wall charger and it still gives me the same issue. Well actually now, the previous battery I had doesn't even let me go into download mode or shows any signs of power. The replacement battery that I am trying does show some sign of life by trying to go into download mode, but giving me the "Battery low!!, Can't Download".
Click to expand...
Click to collapse
Like I said it sounds exactly what I was going through and it took 8 dollars to fix it so its worth it.http://item.mobileweb.ebay.com/viewitem?itemId=190757144194&index=1&nav=SEARCH&nid=91640319289
Sent from my SGH-I777 using Tapatalk 2
I have fixed this issue by connecting 3AA batteries together on series and placing the positive from the first AA battery on the positive terminal of the phone battery and the negative of the last AA battery to the negative of the phone battery. You are basically charging your phone battery minus any safety precautions. Leave the AA batteries.connected.for about 5 minutes and you should be good to go. Reset battery statistics when the phone has booted and charged correctly.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
So I had an extra charging port and I switched them out and yet I have the same problem. I am going to try your way jmgelba, but I don't quite understand how you connected 3 AA batteries in a series and connected the positive of the first and negative of last battery to phone batter? Did you use wires? Do you have a image configuration to show me or a photo?
Thanks
I used soldered wires on the batteries which were in series, giving me 4.5v.
Sent from my SGH-I777 using xda app-developers app
first of all thank you to everyone who has replied.
So I bought a new battery and I believe the batteries that I tried were bad. So I tried flashing it back to stock ics with odin and all works fine, until it tells me "FAIL". I dunno why its not flashing back to stock. I managed to root the phone and it roots and reboots and shows the galaxy logo but then gets stuck. I left it for a while but nothing happened. I tried to flash back to stock once more and it got stuck on odin and I bricked the phone, luckily i had a unbrick usb jig and so I took out battery, plugged it in and it goes directly to download mode and says
"Product name: SGH-I777
Custom Binary Download: No
Current Binary: Samsung Official"
So I don't know if that means the official ICS is installed or what. I try flashing it again but same thing happens and it fails. Any help would be appreciated.
Thank You.
P.S I have been looking for Stock Gingerbread, maybe thats why its not flashing, but doubt it. Where can I get it?
Now it also gets stuck on Samsung Galaxy SII logo after reboot
cm_narimani said:
first of all thank you to everyone who has replied.
So I bought a new battery and I believe the batteries that I tried were bad. So I tried flashing it back to stock ics with odin and all works fine, until it tells me "FAIL". I dunno why its not flashing back to stock. I managed to root the phone and it roots and reboots and shows the galaxy logo but then gets stuck. I left it for a while but nothing happened. I tried to flash back to stock once more and it got stuck on odin and I bricked the phone, luckily i had a unbrick usb jig and so I took out battery, plugged it in and it goes directly to download mode and says
"Product name: SGH-I777
Custom Binary Download: No
Current Binary: Samsung Official"
So I don't know if that means the official ICS is installed or what. I try flashing it again but same thing happens and it fails. Any help would be appreciated.
Thank You.
P.S I have been looking for Stock Gingerbread, maybe thats why its not flashing, but doubt it. Where can I get it?
Now it also gets stuck on Samsung Galaxy SII logo after reboot
Click to expand...
Click to collapse
Go to the download repository (link in my sig) and flash the I777UCKH7-CL503881 Stock Binaries. That's stock Gingerbread full install with all the files. You can use the one-click downloader, or use the tar.md5 file with Odin. Let us know if that gets you going.
@creepyncrawly
Thats funny cuz I just came back to reply that I found a solution at
http://forum.xda-developers.com/showthread.php?p=18859438 which is your post and I just noticed that you had replied.
It did work and it is back to stock. Freaking tried everything and your solution worked.
Thank You
Easy Solution
A very Simple Solution:-
I have been seeing the same issue in my sgh-i777, and found an easy alternative.
you just cover the battery output points with a small piece of paper. and put it back in phone to get charge.
This way it will only charge; NOT start /try to start the phone and go into infinite loop of boot.
wait for 15-20 min, pull the paper pieces out and BINGO, your phone turn on!
Hi Guys I've looked at loads of other related posts for this but nothing seems to be the same as mine, let me try and give you a bit of background on this it wont be perfect as it is my sisters phone and she doesn't know anything. my sister left her original charger at her boyfriends and therefore had to use a cheaper non-stock one she had. Every-time she used it her phone would play up do things like open the car mode and keep rebooting, she didn't think much of it and used it anyway. Her phone died (ran out of battery) one evening and she used the strange charger to charge her phone overnight this however seems to have caused issues since then it wont boot it goes past the Samsung boot screen then the o2 boot screen then just repeats (sounds like a boot loop) note the phone has never been rooted and is still 100% stock.
So this is the issue I figured using ODIN and flashing the stock firmware would fix the issue but I cannot for the life of me get the phone to pick up on ANY computer at all I've tried different charger cables, different computers, Different OS's, cleaning the port and pretty much everything else the internet has currently had to offer. I really am at a loss here I cant use recovery as its not rooted I cant use something like Kies Air or mobile odin as I cant boot into the room and using ODIN is im unable to connect to any computers.
So I guys I'm reaching out to you here what can I do to fix this I really need some advice :laugh:
Thanks in advance.
Say hi to your sister for me.
Oh and her battery must be dead because of the charger.
Usb port could also be busted.
Get another fully charged battery and check it out.
PS: I didn't even read the thread.
Sent from the little guy
gastonw said:
Say hi to your sister for me.
Oh and her battery must be dead because of the charger.
Usb port could also be busted.
Get another fully charged battery and check it out.
PS: I didn't even read the thread.
Sent from the little guy
Click to expand...
Click to collapse
Battery seems to work fine, it charges in the computer fine and i tried my mates s2 battery and it was still in the same situation :silly:
Let me read the thread then
Done.
Change usb port, it's busted.
If in warranty...well have them take a look at it.
Sent from the little guy
gastonw said:
Let me read the thread then
Done.
Change usb port, it's busted.
If in warranty...well have them take a look at it.
Sent from the little guy
Click to expand...
Click to collapse
No shes had it since launch so its way out, also if it charges would that not mean its working?
Different conectors.
Warranty is for 2 years mostly....
Sent from the little guy
Do you think there is anything else I can try I don't want to jump directly into replacing parts/handset.
If it's a hardware fault, not much while you can do other than change the part. The part itself is cheap, isn't even hard to swap it out
Sent from my GT-I9100 using xda app-developers app