[Q] Need help to go back to stock rom - Galaxy S II Q&A, Help & Troubleshooting

Hello everyone.
I need your help because my samsung galaxy s II has the "red screen of death" so I would need to get it back to stock rom before sending it to after sales service.
Can you help me finding the right rom and how to install it please ? At the moment I have CM7.1
Thanks in advance !

sammobile.com
Download stock there. Its impossible to guess which specific one it came with unless you provide the information.

What's the "red screen of death"?

oinkylicious said:
What's the "red screen of death"?
Click to expand...
Click to collapse
+1, never heard of it.

Kaze105 said:
sammobile.com
Download stock there. Its impossible to guess which specific one it came with unless you provide the information.
Click to expand...
Click to collapse
Thank you I will try to find the right one
oinkylicious said:
What's the "red screen of death"?
Click to expand...
Click to collapse
well the phone's screen works perfectly but everything is red (no I did not mess with themes or colors or whatever, just powered it on and everything is red)

mehdimasrour said:
Hello everyone.
I need your help because my samsung galaxy s II has the "red screen of death" so I would need to get it back to stock rom before sending it to after sales service.
Can you help me finding the right rom and how to install it please ? At the moment I have CM7.1
Thanks in advance !
Click to expand...
Click to collapse
Did u install a different kernel? Did u install some app to change something like 3d chainfire because this seem a night mode?
And finally where was ur original rom? What country and what carrier?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made

deltasync said:
Did u install a different kernel? Did u install some app to change something like 3d chainfire because this seem a night mode?
And finally where was ur original rom? What country and what carrier?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
Click to expand...
Click to collapse
I did absolutely nothing, just powered on my phone and everything is red
I tried to remove the battery, wait a couple of hours and try again, but always red !
phone is from France so I dowload the France rom from sammobile
thx

Please anyone answer,
I downloaded I9100XWKJ2_I9100XEFKJ1_XEF.zip from sammobile, can you tell me how can I use it with Odin ?
Do I use this file for PDA, PHONE or CSC ?
Also what's the pit file ? When downloading Odin from sammobile, I have a s1_odin_20100512.pit, is it the right one ?
Thanks in advance !

this is en example use ur own file. (Proceed at your own risk. We are not liable if anything happens to your device by using this method. )
Step by Step Instructions:
Download the Android Firmware
Extract the downloaded file ‘I9100XXKL1_I9100OXAKL1.rar’ to get these 3 files:
CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5
GT-I9100-CSC-MULTI-OXAKL1.tar.md5
MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
Download Odin software
Disconnect your phone if it’s connected to PC. Switch Off your phone. Wait for vibration to confirm complete switch off.
Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume_DOWN+Home+Power.
this is required to install the XXKG1 using Odin PC Software.
Open Odin (from step 3) — Odin3 v1.85.exe.
Connect your phone to PC now. You should get the message “Added! !”
under the Odin’s message box in the bottom left. If you don’t get this message,
than probably there is a problem with drivers. Make sure you’ve drivers installed.
Important! On Odin, Do NOT tick the ‘Re-Partition’ checkbox, but keep the ‘Auto Reboot’ & ‘F.
Reset Time’ checkboxes ticked. Do not touch any other checkbox or tab or anything, except as required in step 9 below.
Select these files in Odin at respective tabs (check out the screenshot given at the top for help):
Click the PDA Tab, and select CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5 (from step 2.1)
Click the Phone Tab, and select MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5 (from step 2.3)
Click the CSC Tab, and select GT-I9100-CSC-MULTI-OXAKL1.tar.md5 (from step 2.2)
Now, hit the START button to let the process begin.
When process at Odin finishes your phone will automatically reboot —
and you can unplug the cable then.
Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin.
If it’s red and with FAIL written over it, the process flashing process wasn’t successful.

well my phone is bricked now... I will just throw it through the window.
bye

mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
If you didn't use the pit file your phone may only be soft bricked. Read some more and you can fix it if you can get into download mode.
Sent from my GT-I9100 using XDA

mehdimasrour said:
Please anyone answer,
I downloaded I9100XWKJ2_I9100XEFKJ1_XEF.zip from sammobile, can you tell me how can I use it with Odin ?
Do I use this file for PDA, PHONE or CSC ?
Also what's the pit file ? When downloading Odin from sammobile, I have a s1_odin_20100512.pit, is it the right one ?
Thanks in advance !
Click to expand...
Click to collapse
That looks like a .pit file for an S1, not an S2...
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
I'm guessing you went ahead and just tried flashing using that .pit file?
You should never use a firmware or kernel for a different device, but it is sometimes recoverable.
For future reference, NEVER EVER EVER use a .pit file for a different device...

mattyh77 said:
If you didn't use the pit file your phone may only be soft bricked. Read some more and you can fix it if you can get into download mode.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I did use pit file... the phone doesnt power on at all now, no download mode, no recovery, nothing..... you can't imagine how I feel now.....

mehdimasrour said:
I did use pit file... the phone doesnt power on at all now, no download mode, no recovery, nothing..... you can't imagine how I feel now.....
Click to expand...
Click to collapse
Since you flashed using an S1 .pit file, your only hope now is JTag repair. Nothing else has any chance of bringing your device back to life.

mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
did u try the method that i post above

deltasync said:
did u try the method that i post above
Click to expand...
Click to collapse
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....

mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
you can get into download mode?
hold down Volume Down + Home + Power buttons at the same time.

mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
Not sure why you're ignoring my posts. You can get it fixed (JTag) for like $50 US. (I don't know what that translates to in your local currency)

mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
Suppose not. Can't say you weren't helped, though. Read back, use a jig, maybe all hope is not lost.

Related

My SGS2 doesn't want to work after repartition with odin

Hi
I received today my new SGS2 locked. I tryed to install firmware 3 files+pit so i can unlock it. At the pit file Odin stopped and after about 3 mins I unplugged the data cable.
Now I can't turn it on, charge or anything else!
Can anyone help me ?
mboncalo said:
Hi
I received today my new SGS2 locked. I tryed to install firmware 3 files+pit so i can unlock it. At the pit file Odin stopped and after about 3 mins I unplugged the data cable.
Now I can't turn it on, charge or anything else!
Can anyone help me ?
Click to expand...
Click to collapse
Can you get it back into Download mode so you can re-flash firmware?
Why did you flash the pit in the first place? (All tutorials tell you not to do this)
If you cant get it to boot into anything (download or recovery) then I don't know if its possible to restore it...
You might also want to try taking the battery out and putting it back in again if you havent already
You install the wrong pit file .?????
What instructions are you following .
jje
It is possible to repartition but you would need the proper set of files that support it.
If i'm right (not sure though) you can do it with a set that contain the "_user_low_ship" in the pda name.
The download on samfirmware of the I9100XWKF1 does have this, containing odin 1.85, a 3 set for pda, modem and csc, and pit file.
JJEgan said:
You install the wrong pit file .?????
What instructions are you following .
jje
Click to expand...
Click to collapse
I used Odin3 v1.7 with s1_odin_20100803.pit and I9000XWJS3...
mboncalo said:
I used Odin3 v1.7 with s1_odin_20100803.pit and I9000XWJS3...
Click to expand...
Click to collapse
Thats a partition and ROM for the original galaxy S...
Can you get back to download to flash one for the GSII?
You can download the .PIT from here http://www.samfirmware.com/WEBPROTECT-i9100.htm
Also update Odin to 1.83
Epic-Emodude said:
Thats a partition and ROM for the original galaxy S...
Can you get back to download to flash one for the GSII?
You can download the .PIT from here
Also update Odin to 1.83
Click to expand...
Click to collapse
It's useless now because the phone is dead. I can't enter download or recovery mode. I can't turn it on or charge it...
What can I do now ? I guess it's not possible to be completely broken
mboncalo said:
It's useless now because the phone is dead. I can't enter download or recovery mode. I can't turn it on or charge it...
What can I do now ? I guess it's not possible to be completely broken
Click to expand...
Click to collapse
Send it for a repair and hope it won't be a too costly one or the repair guys cannot turn it on either to find out you tried to flash a SGS firmware on it. Also Odin is now going in version 1.8x so you should update your flashing software too.
Pume said:
Send it for a repair and hope it won't be a too costly one or the repair guys cannot turn it on either to find out you tried to flash a SGS firmware on it. Also Odin is now going in version 1.8x so you should update your flashing software too.
Click to expand...
Click to collapse
Someone from another board told me to try with an USB JIG to start in download mode... Do you guy think it could work this way since I can't turn on my phone in any way ?
Yes you can use a jig check this out
http://www.youtube.com/watch?v=9YRPWU4waa4&feature=youtube_gdata_player
Hope it helps, order one online and goodluck
Sent from my GT-I9100 using XDA Premium App
mboncalo said:
Someone from another board told me to try with an USB JIG to start in download mode... Do you guy think it could work this way since I can't turn on my phone in any way ?
Click to expand...
Click to collapse
The JIGs are like £4 on ebay, so its worth a try, and if it doesnt work then you can sell it on or something.
USB jig any Odin should work flash stock firmware but follow instructions to the letter and read what you are doing first .
jjue
Good luck with the jig hopefully it will work and you can get your phone working again.
I am amazed it let you flash it as well being a totally different ROM!
Take the battery out then press and hold the power key for 10 seconds.
then press and hold home and vol down, do not let go of the keys while doing below
then insert the USB cable
then insert the battery
Does it now go into download mode and get recognised by the PC?
I went to a phone service and the guy there told me that the boot loader was completely erased, everything...there's nothing...
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Idan73 said:
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Click to expand...
Click to collapse
I think he was high when he did it.
Idan73 said:
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Click to expand...
Click to collapse
I'm a newbie in this area and didn't do more research. So that's why i didn't knew there is a difference. I hurry and here I am. What can I do now ?
zxz0O0 said:
I think he was high when he did it.
Click to expand...
Click to collapse
yea, I can say i got high seeing SGS2 in my hands...
mboncalo said:
I'm a newbie in this area and didn't do more research. So that's why i didn't knew there is a difference. I hurry and here I am. What can I do now ?
Click to expand...
Click to collapse
If the bootloader is gone then you would need special equipement to repair.
Sorry to say this but if there is no way to load the bootloader from sdcard or something then you are screwed.

[Q] Bricked. Need help. (sufferer brick)

hey guys, before you say this is a repost ive had a look and was unable to find someone who done the same thing as me...
i have a brand new galaxy s2,
i tried to root it, but some how i stuffed it up and the phone got stuck on the boot screen after the root, i tried to reinstall the kernel but without being able to get into the phone i didnt know which kernel i needed, i DONT have clockworkmod installed so i couldnt boot via that either, so i tried downloading the stock kernel for Telstra my phone provider, i tried installing that, but now instead of being stuck on the screen with the boot logo and a yellow triangle, im stuck on the screen that has a little image of a phone and a computer and an orange triangle between then with a ! in it. any assistance in this would be greatly appreciated
slippery_gypsy said:
hey guys, before you say this is a repost ive had a look and was unable to find someone who done the same thing as me...
i have a brand new galaxy s2,
i tried to root it, but some how i stuffed it up and the phone got stuck on the boot screen after the root, i tried to reinstall the kernel but without being able to get into the phone i didnt know which kernel i needed, i DONT have clockworkmod installed so i couldnt boot via that either, so i tried downloading the stock kernel for Telstra my phone provider, i tried installing that, but now instead of being stuck on the screen with the boot logo and a yellow triangle, im stuck on the screen that has a little image of a phone and a computer and an orange triangle between then with a ! in it. any assistance in this would be greatly appreciated
Click to expand...
Click to collapse
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
wow while i was waiting the 5 minutes to do another pist, i downloaded the jpkh1 rom and installed that... mate your my hero, it worked !!! now to follow some guides and and properly root this phone with the right rom
So you're stuck on the boot screen, and you haven't been able to find any other posts to help you out.... except the HUGE pinned one on the top of the forums
[READ THIS] Got a Boot Loop? Don't post a New Thread! ... yeah, okay, makes sense!
thanks thesaw. but the ones i were able to find assumed that people had ClockWorkMod which i didnt have
slippery_gypsy said:
wow while i was waiting the 5 minutes to do another pist, i downloaded the jpkh1 rom and installed that... mate your my hero, it worked !!! now to follow some guides and and properly root this phone with the right rom
Click to expand...
Click to collapse
Gr8 to hear
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Hey,
first question:
You are able to get in download mode? (volume down + home button + power button)
If yes, be cool
So when u are able, flash a stock Rom with "re-partition".
This means also that you must have a stock Rom with 3 files (or sometimes more), but not the one .tar file.
If you've done this, your phone should work normal.
Then try to root again with the right "cf-root" for the android version, you flashed.
Good luck!
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Just out of curiosity: I always read, you should never select "re-partition".
Why do you suggest this here right now for a StockRom?
Thanks in advance.
System of a pWne!^ said:
Just out of curiosity: I always read, you should never select "re-partition".
Why do you suggest this here right now for a StockRom?
Thanks in advance.
Click to expand...
Click to collapse
Never when it's just a one part .tar file!
If you have three or more you can choose for odin (phone,modem,csc)
then u can select it
CHEERS
Sent from my GT-I9100 using XDA App
What I have read it only works if pit file is available, but even then re-partition should not be used. And a one-file tar generally contains the same files (phone,modem,csc) as the three-file-combo.
That's why I'm so confused.
Im honestly glad you guys know what your talking about
Sent from my GT-I9100 using xda premium
System of a pWne!^ said:
What I have read it only works if pit file is available, but even then re-partition should not be used. And a one-file tar generally contains the same files (phone,modem,csc) as the three-file-combo.
That's why I'm so confused.
Click to expand...
Click to collapse
The .pit file is only needed by three-file-combo.
Then you can check also the repartition.
If you have one file .tar, the .pit-file is senseless and never should check repartition.
Sure in one file you have nearly the same "files" like in three, but in three-file they can be written separatly on right partition.
Mates don't get me wrong but just accept it
I'm not a dev or scripter but but flashed a lot.
Never bricked my phone but often hanging in bootloop and so on.
And like you see the way with re-partition can help.
I Never flashed a stock Rom since I had my SGS II, but like I said I'm flashing a lot and I had the SGS before, too
Hope all question are answered.
If not pls ask devs for more info.
But that's the general things I can tell you
CHEERS
Sent from my GT-I9100 using XDA App
Hannibal226 said:
Never when it's just a one part .tar file!
If you have three or more you can choose for odin (phone,modem,csc)
then u can select it
CHEERS
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Wrong, you can use it with both single tarball archive or with the 3 component tarball. You don't need to repartition the device unless you need to change the partition layout for whatever reason or you've damaged your partition layout.
Intratech said:
Wrong, you can use it with both single tarball archive or with the 3 component tarball. You don't need to repartition the device unless you need to change the partition layout for whatever reason or you've damaged your partition layout.
Click to expand...
Click to collapse
1) Right, he damaged it so he needed it.
2) No you shouldn't use it by one file flash!
Read threads and experiences from users which have probs after flashing like this if at all possible to flash.
But however I don't wanna say anybody how to flash.
That's my and also a lot of other user experience
CHEERS
Sent from my GT-I9100 using XDA App

SGH-I777 wont boot right

I flashed my sgh-i777 with odin to stock and now it thinks its a gt-i9000 (shows on the boot up screen) just goes to the at&t screen and does nothing, wont let me into recovery or download mode. Please help me
utahst8 said:
I flashed my sgh-i777 with odin to stock and now it thinks its a gt-i9000 and wont just goes to the att screen and does nothing wont let me into recovery or download mode. Please help me
Click to expand...
Click to collapse
That last bit makes no sense and make a better title than HELP! Also I'm sure you could solve this problem with a quick search.
122ninjas said:
That last bit makes no sense and make a better title than HELP! Also I'm sure you could solve this problem with a quick search.
Click to expand...
Click to collapse
Yeah this subject has been beaten to death already. It would be nice if people would learn how to search like they agreed to when they signed up for an account.
Sent from my Nexus 7 using Tapatalk 2
Already did this
Pirateghost said:
Yeah this subject has been beaten to death already. It would be nice if people would learn how to search like they agreed to when they signed up for an account.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I have searched all over and have tried different things and nothing still
utahst8 said:
I have searched all over and have tried different things and nothing still
Click to expand...
Click to collapse
Whatever.
You did some **** that you shouldn't have done without reading first. If you had done any damn research you would know why the i9100 screen pops up. And it isn't because your phone thinks its an i9100.
Its covered in the stickies in this forum section. Open your eyes and read.
Sent from my Nexus 7 using Tapatalk 2
I wish people would follow the rules they agreed to when signing up.
Pirateghost said:
Whatever.
You did some **** that you shouldn't have done without reading first. If you had done any damn research you would know why the i9100 screen pops up. And it isn't because your phone thinks its an i9100.
Its covered in the stickies in this forum section. Open your eyes and read.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I was coming from cm9 the samsung galaxy s2 att version to stock and now its bricked. I installed stock and it still shows i9100 without the triangle
utahst8 said:
I flashed my sgh-i777 with odin to stock and now it thinks its a gt-i9000 (shows on the boot up screen) just goes to the at&t screen and does nothing, wont let me into recovery or download mode. Please help me
Click to expand...
Click to collapse
No one can help you unless you provide enough useful information about what you have done. You should have read and learned enough to avoid making a mistake in the first place, but if you will tell us what you have done, maybe you'll get some help. What exactly did you flash with Odin? Provide a link to it? You did not get the warning on boot from flashing stock. What method did you use to try to enter download mode? To try to enter Recovery?
creepyncrawly said:
No one can help you unless you provide enough useful information about what you have done. You should have read and learned enough to avoid making a mistake in the first place, but if you will tell us what you have done, maybe you'll get some help. What exactly did you flash with Odin? Provide a link to it? You did not get the warning on boot from flashing stock. What method did you use to try to enter download mode? To try to enter Recovery?
Click to expand...
Click to collapse
this is the stock: http://mirror2.stockroms.net/downlo...S2Root.com_SGH-I777_UCLE5.zip?token=125251417
and i entered it by plugging it in and holding down the power + volume up/down
utahst8 said:
this is the stock: http://mirror2.stockroms.net/downlo...S2Root.com_SGH-I777_UCLE5.zip?token=125251417
and i entered it by plugging it in and holding down the power + volume up/down
Click to expand...
Click to collapse
well thats a funky website.
And there's your sign
MotoMudder77 said:
well thats a funky website.
And there's your sign
Click to expand...
Click to collapse
Its a link from http://galaxys2root.com/galaxy-s2-root/how-to-root-ics-on-att-galaxy-s2-sgh-i777/
MotoMudder77 said:
well thats a funky website.
And there's your sign
Click to expand...
Click to collapse
Also has galaxys2root.com
utahst8 said:
Its a link from http://galaxys2root.com/galaxy-s2-root/how-to-root-ics-on-att-galaxy-s2-sgh-i777/
Click to expand...
Click to collapse
Not familiar with that particular file, but we have seen a multitude of problems from flashing firmware provided by galaxys2rootdotcom. Please use an archive program to open the tar and list the contents back here. (I don't want to download 387MB just to look at it.)
creepyncrawly said:
Not familiar with that particular file, but we have seen a multitude of problems from flashing firmware provided by galaxys2rootdotcom. Please use an archive program to open the tar and list the contents back here. (I don't want to download 387MB just to look at it.)
Click to expand...
Click to collapse
This is what i get..
utahst8 said:
This is what i get..
Click to expand...
Click to collapse
That's not a galaxys2root produced file. That is the straight stock Kies file which they downloaded from SamFirmware or Samsung Updates. That didn't cause the problem.
You say you can now not enter either download mode or recovery?
Don't do a wipe data with that installed if you do get into recovery!
creepyncrawly said:
That's not a galaxys2root produced file. That is the straight stock Kies file which they downloaded from SamFirmware or Samsung Updates. That didn't cause the problem.
You say you can now not enter either download mode or recovery?
Don't do a wipe data with that installed if you do get into recovery!
Click to expand...
Click to collapse
i can get into download no but odin doesnt like it. It tries to setup connection and cant.
utahst8 said:
i can get into download no but odin doesnt like it. It tries to setup connection and cant.
Click to expand...
Click to collapse
I'm not sure why your phone is having problems. You should be able to just flash stock and start over. If it were my phone, I would flash UCKH7 stock plus root, install a Gingerbread custom kernel, and then pick a firmware from the development forum. If you choose to follow that path, be sure to open the Oden window first before putting your phone into download mode. If you need additional information, there is plenty of help in the guides and threads linked in my signature.
I have flashed the firmware you would have flashed and it is in a boot loop with the att boot image
creepyncrawly said:
I'm not sure why your phone is having problems. You should be able to just flash stock and start over. If it were my phone, I would flash UCKH7 stock plus root, install a Gingerbread custom kernel, and then pick a firmware from the development forum. If you choose to follow that path, be sure to open the Oden window first before putting your phone into download mode. If you need additional information, there is plenty of help in the guides and threads linked in my signature.
Click to expand...
Click to collapse
I have flashed the firmware you would have flashed and it is in a boot loop with the att boot image. on the boot screen it still shows I9100 as the model...
utahst8 said:
I have flashed the firmware you would have flashed and it is in a boot loop with the att boot image. on the boot screen it still shows I9100 as the model...
Click to expand...
Click to collapse
Did you flash a custom kernel and then flash a new rom?

[Q] bricked samsung gt-b5510 (Galaxy Txt)

Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)

Need ODIN tar - NOVENADXLJ2!!

Is there anybody out there that can make me an ODIN tar of the Novena J2 rom? It's the only way I can flash the rom on my phone, and I am unable to do it... yet. I will gladly donate! :good:
needs to be in q&a....
Sent from my SAMSUNG-SGH-I717 using xda premium
Guy...you're in the wrong area.
I have never put together an odin package before...so I am no help there. However, if you are unable to get into recovery because of your broken volume up button...why not try this...
https://play.google.com/store/apps/...sMSwyLDEsImNvbS5mbGFwcGpheHh4LnBvd2VydG9vbCJd
I think it's been suggested to you before. This will get you into recovery...all you need is root.
NunHugger said:
Guy...you're in the wrong area.
I have never put together an odin package before...so I am no help there. However, if you are unable to get into recovery because of your broken volume up button...why not try this...
https://play.google.com/store/apps/...sMSwyLDEsImNvbS5mbGFwcGpheHh4LnBvd2VydG9vbCJd
I think it's been suggested to you before. This will get you into recovery...all you need is root.
Click to expand...
Click to collapse
I'm locked out of the phone, but ill move to Q&A
MeestersPrime said:
Is there anybody out there that can make me an ODIN tar of the Novena J2 rom? It's the only way I can flash the rom on my phone, and I am unable to do it... yet. I will gladly donate! :good:
Click to expand...
Click to collapse
Why don't you give this a shot....
If you are willing to unroot and root again, here's what I've been doing to return to stock.
1 - Put phone in "Download Mode" - phone connected to PC
2 - Start Samsung Kies (make sure you have the latest.....)
3 - From Kies, click on tools then "Firmware Upgrade and Initialization"
4 - You will be prompted to enter ESN and model number (it is ok to pull the battery out to get ESN and Model - phone won't die with battery pulled at that point)
5 - And follow the prompts
The process does take some time. I have successfully done this many times with success.
Try it out to see if that might help you.
Good Luck!
Thread closed, due to duplicates...Thank You

Categories

Resources