Hi
I received today my new SGS2 locked. I tryed to install firmware 3 files+pit so i can unlock it. At the pit file Odin stopped and after about 3 mins I unplugged the data cable.
Now I can't turn it on, charge or anything else!
Can anyone help me ?
mboncalo said:
Hi
I received today my new SGS2 locked. I tryed to install firmware 3 files+pit so i can unlock it. At the pit file Odin stopped and after about 3 mins I unplugged the data cable.
Now I can't turn it on, charge or anything else!
Can anyone help me ?
Click to expand...
Click to collapse
Can you get it back into Download mode so you can re-flash firmware?
Why did you flash the pit in the first place? (All tutorials tell you not to do this)
If you cant get it to boot into anything (download or recovery) then I don't know if its possible to restore it...
You might also want to try taking the battery out and putting it back in again if you havent already
You install the wrong pit file .?????
What instructions are you following .
jje
It is possible to repartition but you would need the proper set of files that support it.
If i'm right (not sure though) you can do it with a set that contain the "_user_low_ship" in the pda name.
The download on samfirmware of the I9100XWKF1 does have this, containing odin 1.85, a 3 set for pda, modem and csc, and pit file.
JJEgan said:
You install the wrong pit file .?????
What instructions are you following .
jje
Click to expand...
Click to collapse
I used Odin3 v1.7 with s1_odin_20100803.pit and I9000XWJS3...
mboncalo said:
I used Odin3 v1.7 with s1_odin_20100803.pit and I9000XWJS3...
Click to expand...
Click to collapse
Thats a partition and ROM for the original galaxy S...
Can you get back to download to flash one for the GSII?
You can download the .PIT from here http://www.samfirmware.com/WEBPROTECT-i9100.htm
Also update Odin to 1.83
Epic-Emodude said:
Thats a partition and ROM for the original galaxy S...
Can you get back to download to flash one for the GSII?
You can download the .PIT from here
Also update Odin to 1.83
Click to expand...
Click to collapse
It's useless now because the phone is dead. I can't enter download or recovery mode. I can't turn it on or charge it...
What can I do now ? I guess it's not possible to be completely broken
mboncalo said:
It's useless now because the phone is dead. I can't enter download or recovery mode. I can't turn it on or charge it...
What can I do now ? I guess it's not possible to be completely broken
Click to expand...
Click to collapse
Send it for a repair and hope it won't be a too costly one or the repair guys cannot turn it on either to find out you tried to flash a SGS firmware on it. Also Odin is now going in version 1.8x so you should update your flashing software too.
Pume said:
Send it for a repair and hope it won't be a too costly one or the repair guys cannot turn it on either to find out you tried to flash a SGS firmware on it. Also Odin is now going in version 1.8x so you should update your flashing software too.
Click to expand...
Click to collapse
Someone from another board told me to try with an USB JIG to start in download mode... Do you guy think it could work this way since I can't turn on my phone in any way ?
Yes you can use a jig check this out
http://www.youtube.com/watch?v=9YRPWU4waa4&feature=youtube_gdata_player
Hope it helps, order one online and goodluck
Sent from my GT-I9100 using XDA Premium App
mboncalo said:
Someone from another board told me to try with an USB JIG to start in download mode... Do you guy think it could work this way since I can't turn on my phone in any way ?
Click to expand...
Click to collapse
The JIGs are like £4 on ebay, so its worth a try, and if it doesnt work then you can sell it on or something.
USB jig any Odin should work flash stock firmware but follow instructions to the letter and read what you are doing first .
jjue
Good luck with the jig hopefully it will work and you can get your phone working again.
I am amazed it let you flash it as well being a totally different ROM!
Take the battery out then press and hold the power key for 10 seconds.
then press and hold home and vol down, do not let go of the keys while doing below
then insert the USB cable
then insert the battery
Does it now go into download mode and get recognised by the PC?
I went to a phone service and the guy there told me that the boot loader was completely erased, everything...there's nothing...
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Idan73 said:
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Click to expand...
Click to collapse
I think he was high when he did it.
Idan73 said:
Just wondering why would you try flashing sgs pit and sgs firmware on sgs2.
Sent from my GT-I9100
Click to expand...
Click to collapse
I'm a newbie in this area and didn't do more research. So that's why i didn't knew there is a difference. I hurry and here I am. What can I do now ?
zxz0O0 said:
I think he was high when he did it.
Click to expand...
Click to collapse
yea, I can say i got high seeing SGS2 in my hands...
mboncalo said:
I'm a newbie in this area and didn't do more research. So that's why i didn't knew there is a difference. I hurry and here I am. What can I do now ?
Click to expand...
Click to collapse
If the bootloader is gone then you would need special equipement to repair.
Sorry to say this but if there is no way to load the bootloader from sdcard or something then you are screwed.
Related
Hello everyone.
I need your help because my samsung galaxy s II has the "red screen of death" so I would need to get it back to stock rom before sending it to after sales service.
Can you help me finding the right rom and how to install it please ? At the moment I have CM7.1
Thanks in advance !
sammobile.com
Download stock there. Its impossible to guess which specific one it came with unless you provide the information.
What's the "red screen of death"?
oinkylicious said:
What's the "red screen of death"?
Click to expand...
Click to collapse
+1, never heard of it.
Kaze105 said:
sammobile.com
Download stock there. Its impossible to guess which specific one it came with unless you provide the information.
Click to expand...
Click to collapse
Thank you I will try to find the right one
oinkylicious said:
What's the "red screen of death"?
Click to expand...
Click to collapse
well the phone's screen works perfectly but everything is red (no I did not mess with themes or colors or whatever, just powered it on and everything is red)
mehdimasrour said:
Hello everyone.
I need your help because my samsung galaxy s II has the "red screen of death" so I would need to get it back to stock rom before sending it to after sales service.
Can you help me finding the right rom and how to install it please ? At the moment I have CM7.1
Thanks in advance !
Click to expand...
Click to collapse
Did u install a different kernel? Did u install some app to change something like 3d chainfire because this seem a night mode?
And finally where was ur original rom? What country and what carrier?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
deltasync said:
Did u install a different kernel? Did u install some app to change something like 3d chainfire because this seem a night mode?
And finally where was ur original rom? What country and what carrier?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
Click to expand...
Click to collapse
I did absolutely nothing, just powered on my phone and everything is red
I tried to remove the battery, wait a couple of hours and try again, but always red !
phone is from France so I dowload the France rom from sammobile
thx
Please anyone answer,
I downloaded I9100XWKJ2_I9100XEFKJ1_XEF.zip from sammobile, can you tell me how can I use it with Odin ?
Do I use this file for PDA, PHONE or CSC ?
Also what's the pit file ? When downloading Odin from sammobile, I have a s1_odin_20100512.pit, is it the right one ?
Thanks in advance !
this is en example use ur own file. (Proceed at your own risk. We are not liable if anything happens to your device by using this method. )
Step by Step Instructions:
Download the Android Firmware
Extract the downloaded file ‘I9100XXKL1_I9100OXAKL1.rar’ to get these 3 files:
CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5
GT-I9100-CSC-MULTI-OXAKL1.tar.md5
MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
Download Odin software
Disconnect your phone if it’s connected to PC. Switch Off your phone. Wait for vibration to confirm complete switch off.
Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume_DOWN+Home+Power.
this is required to install the XXKG1 using Odin PC Software.
Open Odin (from step 3) — Odin3 v1.85.exe.
Connect your phone to PC now. You should get the message “Added! !”
under the Odin’s message box in the bottom left. If you don’t get this message,
than probably there is a problem with drivers. Make sure you’ve drivers installed.
Important! On Odin, Do NOT tick the ‘Re-Partition’ checkbox, but keep the ‘Auto Reboot’ & ‘F.
Reset Time’ checkboxes ticked. Do not touch any other checkbox or tab or anything, except as required in step 9 below.
Select these files in Odin at respective tabs (check out the screenshot given at the top for help):
Click the PDA Tab, and select CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5 (from step 2.1)
Click the Phone Tab, and select MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5 (from step 2.3)
Click the CSC Tab, and select GT-I9100-CSC-MULTI-OXAKL1.tar.md5 (from step 2.2)
Now, hit the START button to let the process begin.
When process at Odin finishes your phone will automatically reboot —
and you can unplug the cable then.
Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin.
If it’s red and with FAIL written over it, the process flashing process wasn’t successful.
well my phone is bricked now... I will just throw it through the window.
bye
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
If you didn't use the pit file your phone may only be soft bricked. Read some more and you can fix it if you can get into download mode.
Sent from my GT-I9100 using XDA
mehdimasrour said:
Please anyone answer,
I downloaded I9100XWKJ2_I9100XEFKJ1_XEF.zip from sammobile, can you tell me how can I use it with Odin ?
Do I use this file for PDA, PHONE or CSC ?
Also what's the pit file ? When downloading Odin from sammobile, I have a s1_odin_20100512.pit, is it the right one ?
Thanks in advance !
Click to expand...
Click to collapse
That looks like a .pit file for an S1, not an S2...
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
I'm guessing you went ahead and just tried flashing using that .pit file?
You should never use a firmware or kernel for a different device, but it is sometimes recoverable.
For future reference, NEVER EVER EVER use a .pit file for a different device...
mattyh77 said:
If you didn't use the pit file your phone may only be soft bricked. Read some more and you can fix it if you can get into download mode.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I did use pit file... the phone doesnt power on at all now, no download mode, no recovery, nothing..... you can't imagine how I feel now.....
mehdimasrour said:
I did use pit file... the phone doesnt power on at all now, no download mode, no recovery, nothing..... you can't imagine how I feel now.....
Click to expand...
Click to collapse
Since you flashed using an S1 .pit file, your only hope now is JTag repair. Nothing else has any chance of bringing your device back to life.
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
did u try the method that i post above
deltasync said:
did u try the method that i post above
Click to expand...
Click to collapse
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
you can get into download mode?
hold down Volume Down + Home + Power buttons at the same time.
mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
Not sure why you're ignoring my posts. You can get it fixed (JTag) for like $50 US. (I don't know what that translates to in your local currency)
mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
Suppose not. Can't say you weren't helped, though. Read back, use a jig, maybe all hope is not lost.
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)
First I read all the stickies and tried every installation to go back to stock but Odin just freezes up. Also tried different USB ports and and computers and same results. I can only go into download mode.
You may need to repartition. Not knowing the history of how your phone got to where it is now, I can't be sure. Can you give me a complete rundown of your issue?
creepyncrawly said:
You may need to repartition. Not knowing the history of how your phone got to where it is now, I can't be sure. Can you give me a complete rundown of your issue?
Click to expand...
Click to collapse
How would I go about repartitioning the phone? I full wipe and flashed the new Shostock3 and it was doing fine. The next day when I woke up my phone had the sleep of death. The Galaxy S2 logo was stuck and I tried to get into recovery and it only showed half of the screen and was frozen. Now the screen says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Go to the Download Repository. The link is in my sig.
First, try flashing full stock Gingerbread. Use the download under the heading I777UCKH7-CL503881 Stock Binaries. This is the full distribution which contains the bootloaders. It doesn't matter whether you use the one-click downloader, or the tar.md5 file with Odin stand alone. If this flash completes, then you're recovered. Follow the guides to root and install a custom Gingerbread kernel, then flash back to SHOstock3 or whatever firmware you want.
If this flash does not complete, then download the I777 UCKH7 PIT and use that in Odin stand alone with the above tar.md5 file. Insert the tar in the PDA slot, the pit in the PIT slot, and check repartition, then flash.
creepyncrawly said:
Go to the Download Repository. The link is in my sig.
First, try flashing full stock Gingerbread. Use the download under the heading I777UCKH7-CL503881 Stock Binaries. This is the full distribution which contains the bootloaders. It doesn't matter whether you use the one-click downloader, or the tar.md5 file with Odin stand alone. If this flash completes, then you're recovered. Follow the guides to root and install a custom Gingerbread kernel, then flash back to SHOstock3 or whatever firmware you want.
If this flash does not complete, then download the I777 UCKH7 PIT and use that in Odin stand alone with the above tar.md5 file. Insert the tar in the PDA slot, the pit in the PIT slot, and check repartition, then flash.
Click to expand...
Click to collapse
So I tried both the one-click downloader and flash doesn't not complete, same goes for odin and PIT file.
selw0nk said:
So I tried both the one-click downloader and flash doesn't not complete, same goes for odin and PIT file.
Click to expand...
Click to collapse
If you didn't try it already, now go back and flash just the tar.md5 file without the pit, again, and see if it will complete.
creepyncrawly said:
If you didn't try it already, now go back and flash just the tar.md5 file without the pit, again, and see if it will complete.
Click to expand...
Click to collapse
Just did and it is stuck at NAND Write Start!! My phone might have a hardware issue.
selw0nk said:
Just did and it is stuck at NAND Write Start!! My phone might have a hardware issue.
Click to expand...
Click to collapse
Yes, I was hoping that the problem is not hardware, but it was a thought from the beginning, given the sequence of failure. Is the phone by chance still under warranty?
Let's don't give up yet, though.
Things to try, then try to flash the full firmware in between.
1. Use Odin stand alone to flash just the I777 secondary bootloader.
2. Use Odin stand alone to flash just the param.lfs.
Try the instructions in this post.
creepyncrawly said:
Yes, I was hoping that the problem is not hardware, but it was a thought from the beginning, given the sequence of failure. Is the phone by chance still under warranty?
Let's don't give up yet, though.
Things to try, then try to flash the full firmware in between.
1. Use Odin stand alone to flash just the I777 secondary bootloader.
2. Use Odin stand alone to flash just the param.lfs.
Try the instructions in this post.
Click to expand...
Click to collapse
No it isn't anymore. My upgrade isn't until May. Do you think a usb jig will work?
Thanks I will try that and will let you know how it comes along.
selw0nk said:
Do you think a usb jig will work?
Click to expand...
Click to collapse
You can already get into download mode. I don't believe there is any difference in the download mode produced by a jig. A jig is really helpful if the wrong secondary bootloader was flashed by accident (or ignorance), and you can't get the phone into download mode any ohter way.
selw0nk said:
No it isn't anymore. My upgrade isn't until May. Do you think a usb jig will work?
Thanks I will try that and will let you know how it comes along.
Click to expand...
Click to collapse
Tried those these you mentioned and still stuck. I'm already losing hope and want to get a new phone or spare already. I think I have a few things saved in the phone too.
Update: My screen is stuck at the Samsung Galaxy S2 screen with the yellow triangle.
Same problem
selw0nk said:
Tried those these you mentioned and still stuck. I'm already losing hope and want to get a new phone or spare already. I think I have a few things saved in the phone too.
Update: My screen is stuck at the Samsung Galaxy S2 screen with the yellow triangle.
Click to expand...
Click to collapse
I am having the exact same problem and my update isn't until May too!! Is this a common hardware failure?
kunalm123 said:
I am having the exact same problem and my update isn't until May too!! Is this a common hardware failure?
Click to expand...
Click to collapse
What rom were you on if I may ask? I'm not sure, but I'm about ready to give on trying everything. I started using my old Nokia phone and have to manually add my contacts lol. Sad panda
selw0nk said:
What rom were you on if I may ask? I'm not sure, but I'm about ready to give on trying everything. I started using my old Nokia phone and have to manually add my contacts lol. Sad panda
Click to expand...
Click to collapse
I was using a stock unrooted SGS2. It just stop working out of the blue..back to nokia it is
So I think I am going to send my phone to Mobile Tech Videos and hope they can unbrick it. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-jtag-brick-repair/
selw0nk said:
So I think I am going to send my phone to Mobile Tech Videos and hope they can unbrick it. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-jtag-brick-repair/
Click to expand...
Click to collapse
I think I have a similar issue on my phone (stalls in odin, I haven't flashed any PIT files yet), were they able to unbrick it?
Same issue here, The phone's stuck on Nand flash in Odin. Had tried all recommendations suggested here... Any updates on the phone sent to mobiletech guys?
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
smwoodward said:
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
Click to expand...
Click to collapse
Here's a little more info that might help. I tried booting the device without holding the buttons just a second ago, and this is what is on the screen.
Image size too large! W:1080, H:1920
display image fail
Secure Fail: Kernel
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
smwoodward said:
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
Click to expand...
Click to collapse
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
jaredb03 said:
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
Click to expand...
Click to collapse
I haven't found anything. is there seriously no stock rom for this phone?
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
jaredb03 said:
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
Click to expand...
Click to collapse
I can get it into download mode. How do you get it into recovery?
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
chapelfreak said:
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
Click to expand...
Click to collapse
I have 2 megas in my shop right now that the same thing happened to them. Now they cannot be restored through ODIN and Kies says that the model/SN is incorrect.
I got the same problem as well tired to root it didn't work then tired to flash stock rom and I.got display image.to large can some give me right file for rogers Canada cell please and.what.do I need.checked.off in odin
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
can u give another link for those files, plz ? cannot download them from those links.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
Click to expand...
Click to collapse
nicelys said:
can u give another link for those files, plz ? cannot download them from those links.
Click to expand...
Click to collapse
The links work good at my end, but i have the i527m (canadian version) and i cannot use the files, but all the links work.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Click to expand...
Click to collapse
This worked great for me, I had to leave off the PIT file though. :good:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Dudmaster said:
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
What kind of brick?
rafaelpinaf said:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
Click to expand...
Click to collapse
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
Even you have to put the phone in Download mode?
Edit: I tried the same and it still does not work :/
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
you fail because you need a pit file..I can flash my normal firmware without a problem..but if I try a other one for example a provider one..it fails..for that we need the pit..and for that we need root..to extract it from the phone..and I don't won't to root ATM..
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
rafaelpinaf said:
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
Click to expand...
Click to collapse
you just need the version as firmware...you had before on the phone..this should flash
Alex-V said:
you just need the version as firmware...you had before on the phone..this should flash
Click to expand...
Click to collapse
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
warning screen is no problem..it's still the download mode..but you need to know the firmware..may try to reboot both.. phone get into the warning mode again..to ensure good connection and retry smart switch
rafaelpinaf said:
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
Click to expand...
Click to collapse
I've had this problem before, are you planning on rooting as well?
tiboric said:
I've had this problem before, are you planning on rooting as well?
Click to expand...
Click to collapse
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
rafaelpinaf said:
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
Click to expand...
Click to collapse
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
tiboric said:
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
Click to expand...
Click to collapse
Does the CF Autoroot work with G925I?
rafaelpinaf said:
Does the CF Autoroot work with G925I?
Click to expand...
Click to collapse
according to this you can use 925F version but I can not confirm my self as i don't have the device, If you don't mind rooting and tripping knox, I don't think you can do much more harm
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
I also went through this problem too, and this helped thank you
But also for another phone I had to flash using a different computer for this to work.
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
Maybe you can try each of the stock versions until you get the right one for your particular device. Also maybe a model number would help someone on here to identify what version you have, I don't know just throwing that out there.
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
rafaelpinaf said:
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
Click to expand...
Click to collapse
I can't link to the page I go to because of my noob post count but its samsung-updates in google. There is a whole section with various G925i versions I'm sure you'll find it there.