Related
So I tried to use odin to root my device. I was following a guide on youtube but XDA won't let me post it. I got to where I run odin while my phone is in download mode. Everything goes according to the video, however, when the phone reboots it freezes at the Samsung splash screen with the yellow ! at the bottom. I've tried putting the phone back in download mode and running it through Odin again but the problem is not fixed. Does anyone know how I would go about fixing this?
Try restocking. If you repartitioned you may be in trouble. Go to cm7 website and follow their instructions.
Sent from my GT-P1000 using XDA App
I made sure the repartition option wasn't selected before I ran odin in both cases. I'm assuming by CM7 you mean cyanogenmod? Sorry for the ignorance, I just want to make sure I'm doing what I need to to get it back in working condition
Dont know why should you go to cm7 website.
Follow this: http://forum.xda-developers.com/showthread.php?t=1103399
use an appropriate kernel for your phone.
Or get a stock kernel and use odin to flash: http://forum.xda-developers.com/showthread.php?t=1075278
Still not working? Use this: http://forum.xda-developers.com/showthread.php?t=1108499
For Galaxy S 2 GT I9100
Totalrapture said:
I made sure the repartition option wasn't selected before I ran odin in both cases. I'm assuming by CM7 you mean cyanogenmod? Sorry for the ignorance, I just want to make sure I'm doing what I need to to get it back in working condition
Click to expand...
Click to collapse
I've got no idea what boxhead72 is going on about, but anyway, to be able to help you, we need to know what you've done. Generally, you need to make sure you're flashing a correct ROM/kernel/modem for your device. You also might need to reset to factory settings. But without knowing what you've done, it's impossible to say.
You can find stock ROMs and a guide for I9100 (if that is your phone's model) in Intratech's thread here: [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download.
On the plus side, if you can get to the boot screen, you are far better off than those who get NOTHING. I know it doesn't make you feel that good right now, but if you can get this far, your chances of recovery (if you follow instructions) are near 100%.
If you told us that you get no response at all from the phone when the power button was pressed, you might have room to worry a bit.
Now, not so much. Just take a minute to breathe and read through your steps as outlined in the above mentioned threads. You'll be fine in all likelihood.
Okay, I did some more searching and realized I was on the completely wrong forum... I have the AT&T U.S. I777 Galaxy S2. So exactly what I did was install kies, close out of it, put my phone into download mode, connect it to my computer, install what I assume was an incorrect .tar file using Odin while it was in download mode, let it reboot and am now seeing it hang at the boots screen with the yellow exclamation mark. I wouldn't mind reformatting it if someone could show me how, but I mainly want to use this guide:
http://forum.xda-developers.com/showthread.php?t=1285894
to root it and install CM7. Could I just run odin again and install the .tar file given in these instructions? Or does it not quite work like that? Thanks for all the help you guys are giving by the way!
Totalrapture said:
Okay, I did some more searching and realized I was on the completely wrong forum... I have the AT&T U.S. I777 Galaxy S2. So exactly what I did was install kies, close out of it, put my phone into download mode, connect it to my computer, install what I assume was an incorrect .tar file using Odin while it was in download mode, let it reboot and am now seeing it hang at the boots screen with the yellow exclamation mark. I wouldn't mind reformatting it if someone could show me how, but I mainly want to use this guide:
http://forum.xda-developers.com/showthread.php?t=1285894
to root it and install CM7. Could I just run odin again and install the .tar file given in these instructions? Or does it not quite work like that? Thanks for all the help you guys are giving by the way!
Click to expand...
Click to collapse
I don't know anything about that phone, but a quick look in those forums shows:
[Heimdall][Odin][Stock][Root]UCKH7 Return/Unbrick to Stock (or Root)
and
[ROM] CyanogenMod 7 for the Samsung Galaxy S II (AT&T) :: V7.1.0 RC1 (9 Oct 2011)
Thanks for those, I was actually reading through them when I noticed you posted them. I have another problem now though, I ran the stock rom through odin in this guide:
http://forum.xda-developers.com/showthread.php?t=1286432
but it failed in Odin and upon reboot it says firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I didn't know kies had a recovery mode, but when I connect my phone it always fails to connect. Note that I CAN still get into the download menu, but that's it. At this point is there anything else I can do?
Totalrapture said:
it failed in Odin and upon reboot it says firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I didn't know kies had a recovery mode
Click to expand...
Click to collapse
I presume Kies recovery mode is in Kies -> Tools -> Emergency firmware recovery.
I noticed that as well but like I said I cannot connect to Kies so any recovery mode isn't very helpful
Totalrapture said:
At this point is there anything else I can do?
Click to expand...
Click to collapse
I guess if you've done everything on [Guide] How to Prepare Your Phone to Return to the Store or for Warranty Replacement (which is linked at the bottom of the thread I linked earlier), then your next port of call should be Recovering an ATT Galaxy S2 after flashing GT-I9100 Firmware.
Hello everyone.
I need your help because my samsung galaxy s II has the "red screen of death" so I would need to get it back to stock rom before sending it to after sales service.
Can you help me finding the right rom and how to install it please ? At the moment I have CM7.1
Thanks in advance !
sammobile.com
Download stock there. Its impossible to guess which specific one it came with unless you provide the information.
What's the "red screen of death"?
oinkylicious said:
What's the "red screen of death"?
Click to expand...
Click to collapse
+1, never heard of it.
Kaze105 said:
sammobile.com
Download stock there. Its impossible to guess which specific one it came with unless you provide the information.
Click to expand...
Click to collapse
Thank you I will try to find the right one
oinkylicious said:
What's the "red screen of death"?
Click to expand...
Click to collapse
well the phone's screen works perfectly but everything is red (no I did not mess with themes or colors or whatever, just powered it on and everything is red)
mehdimasrour said:
Hello everyone.
I need your help because my samsung galaxy s II has the "red screen of death" so I would need to get it back to stock rom before sending it to after sales service.
Can you help me finding the right rom and how to install it please ? At the moment I have CM7.1
Thanks in advance !
Click to expand...
Click to collapse
Did u install a different kernel? Did u install some app to change something like 3d chainfire because this seem a night mode?
And finally where was ur original rom? What country and what carrier?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
deltasync said:
Did u install a different kernel? Did u install some app to change something like 3d chainfire because this seem a night mode?
And finally where was ur original rom? What country and what carrier?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
Click to expand...
Click to collapse
I did absolutely nothing, just powered on my phone and everything is red
I tried to remove the battery, wait a couple of hours and try again, but always red !
phone is from France so I dowload the France rom from sammobile
thx
Please anyone answer,
I downloaded I9100XWKJ2_I9100XEFKJ1_XEF.zip from sammobile, can you tell me how can I use it with Odin ?
Do I use this file for PDA, PHONE or CSC ?
Also what's the pit file ? When downloading Odin from sammobile, I have a s1_odin_20100512.pit, is it the right one ?
Thanks in advance !
this is en example use ur own file. (Proceed at your own risk. We are not liable if anything happens to your device by using this method. )
Step by Step Instructions:
Download the Android Firmware
Extract the downloaded file ‘I9100XXKL1_I9100OXAKL1.rar’ to get these 3 files:
CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5
GT-I9100-CSC-MULTI-OXAKL1.tar.md5
MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
Download Odin software
Disconnect your phone if it’s connected to PC. Switch Off your phone. Wait for vibration to confirm complete switch off.
Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume_DOWN+Home+Power.
this is required to install the XXKG1 using Odin PC Software.
Open Odin (from step 3) — Odin3 v1.85.exe.
Connect your phone to PC now. You should get the message “Added! !”
under the Odin’s message box in the bottom left. If you don’t get this message,
than probably there is a problem with drivers. Make sure you’ve drivers installed.
Important! On Odin, Do NOT tick the ‘Re-Partition’ checkbox, but keep the ‘Auto Reboot’ & ‘F.
Reset Time’ checkboxes ticked. Do not touch any other checkbox or tab or anything, except as required in step 9 below.
Select these files in Odin at respective tabs (check out the screenshot given at the top for help):
Click the PDA Tab, and select CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5 (from step 2.1)
Click the Phone Tab, and select MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5 (from step 2.3)
Click the CSC Tab, and select GT-I9100-CSC-MULTI-OXAKL1.tar.md5 (from step 2.2)
Now, hit the START button to let the process begin.
When process at Odin finishes your phone will automatically reboot —
and you can unplug the cable then.
Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin.
If it’s red and with FAIL written over it, the process flashing process wasn’t successful.
well my phone is bricked now... I will just throw it through the window.
bye
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
If you didn't use the pit file your phone may only be soft bricked. Read some more and you can fix it if you can get into download mode.
Sent from my GT-I9100 using XDA
mehdimasrour said:
Please anyone answer,
I downloaded I9100XWKJ2_I9100XEFKJ1_XEF.zip from sammobile, can you tell me how can I use it with Odin ?
Do I use this file for PDA, PHONE or CSC ?
Also what's the pit file ? When downloading Odin from sammobile, I have a s1_odin_20100512.pit, is it the right one ?
Thanks in advance !
Click to expand...
Click to collapse
That looks like a .pit file for an S1, not an S2...
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
I'm guessing you went ahead and just tried flashing using that .pit file?
You should never use a firmware or kernel for a different device, but it is sometimes recoverable.
For future reference, NEVER EVER EVER use a .pit file for a different device...
mattyh77 said:
If you didn't use the pit file your phone may only be soft bricked. Read some more and you can fix it if you can get into download mode.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I did use pit file... the phone doesnt power on at all now, no download mode, no recovery, nothing..... you can't imagine how I feel now.....
mehdimasrour said:
I did use pit file... the phone doesnt power on at all now, no download mode, no recovery, nothing..... you can't imagine how I feel now.....
Click to expand...
Click to collapse
Since you flashed using an S1 .pit file, your only hope now is JTag repair. Nothing else has any chance of bringing your device back to life.
mehdimasrour said:
well my phone is bricked now... I will just throw it through the window.
bye
Click to expand...
Click to collapse
did u try the method that i post above
deltasync said:
did u try the method that i post above
Click to expand...
Click to collapse
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
you can get into download mode?
hold down Volume Down + Home + Power buttons at the same time.
mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
Not sure why you're ignoring my posts. You can get it fixed (JTag) for like $50 US. (I don't know what that translates to in your local currency)
mehdimasrour said:
no I flashed it before so now if someone wants a free bricked galaxy s 2, just stand under my window.
I guess I wont need to visit this forum anymore too....
Click to expand...
Click to collapse
Suppose not. Can't say you weren't helped, though. Read back, use a jig, maybe all hope is not lost.
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)
Can Odin be used more than once? I am getting a message with yellow triangle and can only boot phone into Odin. I cannot seem to find a working valid MD5 file either to restore stock.the one posted here seems invalid when checked by Odin.I was going to reflash beans106 build 1 since that seems to be my only option.i wonder how verizon would like me showing up with a phone to reflash.
Anyone I am stuck
Thanks
NB2A said:
Can Odin be used more than once? I am getting a message with yellow triangle and can only boot phone into Odin. I cannot seem to find a working valid MD5 file either to restore stock.the one posted here seems invalid when checked by Odin.I was going to reflash beans106 build 1 since that seems to be my only option.i wonder how verizon would like me showing up with a phone to reflash.
Anyone I am stuck
Thanks
Click to expand...
Click to collapse
You should be able to use Odin multiple times! over and over. If you go to Verizon they will laugh at you
Sent from my SCH-I605 using xda app-developers app
gowansta said:
You should be able to use Odin multiple times! over and over. If you go to Verizon they will laugh at you
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thanks I keep reading threads that say only use stock roms for Odin after you loaded a custom rom.
I am screwed at this point now anyway not being able to even load current beanstown verson 1 in phone anyway.
Guess a totally bricked phone is all that is left to do then they can have a real good laugh.
Your phone is soft-bricked??
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Dannyvld said:
Your phone is soft-bricked??
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Click to expand...
Click to collapse
Yes only can boot into Odin
Which phone you have?
Phone model:
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Dannyvld said:
Which phone you have?
Phone model:
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Click to expand...
Click to collapse
Note 2 verizon I605 with beanstown 106 build one in it
What were you doing when the phone ended up like this?
tbns said:
What were you doing when the phone ended up like this?
Click to expand...
Click to collapse
I was rebooting for the first time from recovery
Im gonna look for you if i can find a solution
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
http://forum.xda-developers.com/showthread.php?t=2040264
What have u tried? Have you been able to find stock ROM to flash thru Odin?
Sent from my SCH-I605 using xda app-developers app
Dannyvld said:
Im gonna look for you if i can find a solution
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Click to expand...
Click to collapse
Thank you
gowansta said:
What have u tried? Have you been able to find stock ROM to flash thru Odin?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
the few stock roms I have found do not make the check sum in Odin
they seem useless
NB2A said:
the few stock roms I have found do not make the check sum in Odin
they seem useless
Click to expand...
Click to collapse
you have a serious problem on your end...either your computers have viruses or your not telling the whole story. the files work fine i have used them all. i would try installing a fresh copy of windows on your pc.
alternative option: send me your device and 20.00 and i will unlock it and put whatever rom you want on it, then send it back.
droidstyle said:
you have a serious problem on your end...either your computers have viruses or your not telling the whole story. the files work fine i have used them all. i would try installing a fresh copy of windows on your pc.
alternative option: send me your device and 20.00 and i will unlock it and put whatever rom you want on it, then send it back.
Click to expand...
Click to collapse
I need my phone for a sick family member so a trip to Verizon maybe my only option
The files you speak of do not work now for me or they may not need to be unzipped and not specified in directions
The only file Odin sees and does a checksum is is the one that loaded yesterday. The one you said I could not have loaded.
Does Imnuts files for stock recovery need to be unzipped?
NB2A said:
I need my phone for a sick family member so a trip to Verizon maybe my only option
The files you speak of do not work now for me or they may not need to be unzipped and not specified in directions
The only file Odin sees and does a checksum is is the one that loaded yesterday. The one you said I could not have loaded.
Does Imnuts files for stock recovery need to be unzipped?
Click to expand...
Click to collapse
Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium
NB2A said:
I need my phone for a sick family member so a trip to Verizon maybe my only option
The files you speak of do not work now for me or they may not need to be unzipped and not specified in directions
The only file Odin sees and does a checksum is is the one that loaded yesterday. The one you said I could not have loaded.
Does Imnuts files for stock recovery need to be unzipped?
Click to expand...
Click to collapse
your getting corrupt downloads because of something on your end...That's the part your failing to understand... you keep saying "oh well that don't work for me"....ok but there must be a reason. All those files and methods that have been provided work for everyone else including myself. Take a step back make sure your doing everything correctly and make sure your pc is clean and no viruses...again its something on your end.
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
Rebel908 said:
Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
I have been working with the above poster on this issue for a couple days. He has supposedly tried all these files you posted and they don't work for him. there is something going on from his side of the coin...
Very informative response.I thank you a bunch. I ended up using Imnuts stock rom and she booted up fine.I needed to know when those special rooted stock files were there ending in xz format.I could not get Odin to see them.I was not going ti buy this whole brick thing because I was at least able to get into Odin.
I have yet to get Casual to work though even though my machines see my phone in ADB
Happy holidays!
Tom
QUOTE=Rebel908;35850464]Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium[/QUOTE]
NB2A said:
Very informative response.I thank you a bunch. I ended up using Imnuts stock rom and she booted up fine.I needed to know when those special rooted stock files were there ending in xz format.I could not get Odin to see them.I was not going ti buy this whole brick thing because I was at least able to get into Odin.
I have yet to get Casual to work though even though my machines see my phone in ADB
Happy holidays!
Tom
QUOTE=Rebel908;35850464]Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
[/QUOTE]
I provided you with the same links? Now all of a sudden imuts rom worked?? come on tell the truth what else was the problem?? Im not buying it lol...glad you figured it out tho. :good:
Hey peeps
Ok I've been at this for two straight days now in order to try and unbrick this Telus Fascinate SGH-T959P
My buddy initially attempted to flash it with something and really messed it up to the point that even the battery wouldn't charge.
I don't even care if I get it to stock.. an amazing Rom/Kernel combo will also work.
So this is where I am today... and I have spent the last two days non-stop trying to fix this thing...I have been through sooo many forums posts and websites my brain is about to cook.
Software I am using
Odin v1.7 and v1.83.. I try to use the newest one.. just in case.
ADB / SDK installed and am able to push files across to the sdcard in my phone... everything seems good in that dept
Files that have got me to where I am today
T959TLJL3 Froyo original firmware (apparently)... but can not flash all of the files from the package ..zimage and a few others just fail to flash
s1_odin_20100512.pit file (Have atlas_v2.2.pit also but haven't had as much success with it)
SGH-T959-Stock_plus_voodoo_CwM_2.3.4v2
su-2.3.6.3-efgh-signed
I can successfully boot the phone into download mode every single time using the volume up and down while plugging in the usb cable
Also if i just hit the power button I get a Telus 4G / Samsung splash screen and then the phone boots into CwM Voodoo Recovery v3.0.2.8x (Orange??)
In the CwM recovery mode, I can now finally mount all partitions and it looks like things will flash.
Now that I've finally got this phone to this point, I don't want to mess it up.
I want to make sure I have the right files to complete this little project.
Need some direction from the pros.. Am I able to flash a custom rom now ? And if so, what one is best to use.
From this point how can I revert to stock? Do I have the right files ? And how since Odin fails to flash the ones I have.
I figured going to stock first was easier, then use Kies to update it.
Show me the way
Thanks.
jROC
Wow... I got it .. Finally... After I figure out exactly what I used for files.. I will let you know.
All I can tell you right now is that I was flashing a single files at a time then powering down and coming back into download mode to flash the next file.
Right now the phone is all booted up and Running Android v2.3.3 (GB LKG2) and even tho the phone is actually a T959P.. the boot screen shows up as a T959D. Interesting.
jroc99 said:
Wow... I got it .. Finally... After I figure out exactly what I used for files.. I will let you know.
All I can tell you right now is that I was flashing a single files at a time then powering down and coming back into download mode to flash the next file.
Right now the phone is all booted up and Running Android v2.3.3 (GB LKG2) and even tho the phone is actually a T959P.. the boot screen shows up as a T959D. Interesting.
Click to expand...
Click to collapse
Can you send me the T959P stock files please
robbylaw said:
Can you send me the T959P stock files please
Click to expand...
Click to collapse
No single file that I downloaded was able to flash the phone.
I ended up flashing individual files... and kinda had to mix and match, but was able to get the phone booting back into Android OS
However the phone was missing the EFS folder with IMEI info and such..
Still was not able to recover it 100%.
Message me with your email and I will try to send what I used.
jroc99 said:
No single file that I downloaded was able to flash the phone.
I ended up flashing individual files... and kinda had to mix and match, but was able to get the phone booting back into Android OS
However the phone was missing the EFS folder with IMEI info and such..
Still was not able to recover it 100%.
Message me with your email and I will try to send what I used.
Click to expand...
Click to collapse
i messaged you
Ok peeps... If anyone is looking for a firmware file to get their phone booting back into droid I have one that works.
Works on Telus T959P
I have dropbox setup and can share with you that way, just message me.
I need a copy
Sent from my GT-P5113 using xda app-developers app
I've been trying to unbrick an T959P as well, have it so i can also boot into CWM (from SGH-T959-Stock_plus_voodoo_CwM_2.3.4v2) but can never get it too boot into the OS. Tried several files to revert it back to stock but so far nothing has worked. Any hints would be appreciated, thanks in advance
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hopefully it soft bricked not hard bricked.
Fury_Phoenix said:
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hopefully it soft bricked not hard bricked.
Click to expand...
Click to collapse
I posted that in 2013 the device is long gone, thanks for the input though.
draekko said:
I posted that in 2013 the device is long gone, thanks for the input though.
Click to expand...
Click to collapse
Do you have twrp or cwm for the phone?
Fury_Phoenix said:
Do you have twrp or cwm for the phone?
Click to expand...
Click to collapse
I don't have the phone or any software related to that phone. That post was from 7 years ago.