Related
I'm using windows xp SP3 with all the drivers installed and I have downloaded the lumia 800's firmware through nokia datapackage manager.
I have followed a guide to debrand or flash a dead lumia by renaming the files and creating the folders 817. When i create the folder rm-817 the NCS product tool didn't detect it for me so i went with the rm-819. I've ranamed the files to my product name and everything went through find apart from the error before it started flashing under recovery mode. Signature verification error.
Has anyone encountered this before with the lumia 800?? If so please guide me to a work around, any help at all will be much appreciated.
I too having the same problem in flashing with Custom ROM please someone help!!
This is because of the locke bootloader. You cannot flash custom ROMs. The bootloader will check the signature of the ROM, and won't flash it if it's a custom ROM.
_Madmatt said:
This is because of the locke bootloader. You cannot flash custom ROMs. The bootloader will check the signature of the ROM, and won't flash it if it's a custom ROM.
Click to expand...
Click to collapse
yep,it simply means you can not flash this rom.........
you can try an other stock rom,heard about that Singapore's rom is the best one,it contains Nokia music and it is always the first rom gets updated
First: the phone was rooted long ago succesfully - thats not the problem
i think i kinda f***** it up by trying to install feralab v14 custom rom over cyanogen 7 without performing cleaning, backup, putting a new kernel or firmware(dont know if i even need to do it). I've searched the forums far and wide, found nothing but dead links.
flashtool doesnt recognize the device(green light is on when i hold back and connect), s1tool doesnt recognize it... i cant enter bootloader i cant basically do anything with it.. can someone please help me?
Hi,
Are u on locked bootloader or unlocked one ?
Do u run Flashtool with admin rights if u use windows ?
Do u have the latest version of Flashtool ?
Do u have all the drivers installed for your device ?
Do u try PCC to go back to Stock Rom ?
a reply?
9andar said:
Hi,
Are u on locked bootloader or unlocked one ?
Do u run Flashtool with admin rights if u use windows ?
Do u have the latest version of Flashtool ?
Do u have all the drivers installed for your device ?
Do u try PCC to go back to Stock Rom ?
Click to expand...
Click to collapse
i believe unlocked one, i was unable to check
i have xp sp3 idk how to
nope 0.2.5 latest version had some java error
i believe not i dont know how to install them i downloaded a ton of them
i dont know how
Woawww, with this ton of i don't know, it will be hard to help u...
First let's try with PC Companion (PCC) .. use the link in my signature "How to use PC Companion"...
To have it google is your friend it's the official app from Sony Ericsson
..
i already have pcc i will now take a look at the manual
edit btw i just flashed it with 2.1 firmware
roby00231 said:
i already have pcc i will now take a look at the manual
Click to expand...
Click to collapse
did u try latest flashtool V 0.6.9.1 ??
FIND IT HERE
..
i will if this doesnt succeed so far looking good, its downloading and installing stock rom
Once you're on StockRom, use flashtool to root...
If you are on 2.1 stock rom use flashtool to install a 2.3 stock rom, once you did it unlock your bootloader and install a kernel with his wifi module... Then you're ready to install FeraLab v14 or another rom...
..
9andar said:
Once you're on StockRom, use flashtool to root...
If you are on 2.1 stock rom use flashtool to install a 2.3 stock rom, once you did it unlock your bootloader and install a kernel with his wifi module... Then you're ready to install FeraLab v14 or another rom...
Click to expand...
Click to collapse
my phone was already rooted, do i need to root it again?
II may need some directions about unlocking bootloader and installing kernel and stuff..
and is xrecovery erased by this?
edit : Xperia X10 was updated with 3.0.1.G.0.75.
So now you are on 2.3.3...
You have to root again your phone...
Use the last version of flashtool...
And the guide by Crowds (It's in my signature "How to use Flashtool by Crowds")...
All is explained for all the stuff... Installation of Flashtool, the drivers needed, the rooting process, the unlocked bootloader process...
Once all is done, install a kernel (It's a .tft file) with flashtool (DooMKerneL, Thgo kernel, KCkernel... )
Don't forget it's wifi module (it's a zip file to copy on sdcard and install via recovery)...
Then, copy the rom you want on sd card and install it via recovery
9andar said:
So now you are on 2.3.3...
You have to root again your phone...
Use the last version of flashtool...
And the guide by Crowds (It's in my signature "How to use Flashtool by Crowds")...
All is explained for all the stuff... Installation of Flashtool, the drivers needed, the rooting process, the unlocked bootloader process...
Once all is done, install a kernel (It's a .tft file) with flashtool (DooMKerneL, Thgo kernel, KCkernel... )
Don't forget it's wifi module (it's a zip file to copy on sdcard and install via recovery)...
Then, copy the rom you want on sd card and install it via recovery
Click to expand...
Click to collapse
Good job , I'm glad there are members like you that take time to help other members.
Rom: feralab volt v14
kernel: doom v06
rocking the unlocked bootloader,using xda premium app.
No prob, man, it's the XDA forum...
There is a lot of members who takes time to help and we're happy when a pb is fixed...
Enjoy your X10 now.... ;-)
EDIT : You can change the title and put [FIXED] or [SOLVED] it might help others who have the same pb....
uot
dont mind me asking but whats uot kitchen?
edit: thanks for all ur help i fixed everything, rooted it, unlocked bootloader, and installed doomkernel and feralab v14 and its all working perfectly
also stuck at sony ericcson text
i was trying to flash feralab 14.2 and got stuck after the rom installed. i changed all settings the way i wanted and have an unlocked bootloader. but i got stuck after the reboot and the pc companion keeps telling me there is no software for my x10 so repair mode won't finish. what do i do? problem
fixed. had to flash stock 2.3 ftf. flashtool wouldn't allow me to flack 2.1 stock.
Hy gus
I have a similar problem and i tried to follow the pdf that was provided but when i do i boot into xrecover 0.3.
info as follows:
Are u on locked bootloader or unlocked one ? AFAIK it was
Do u run Flashtool with admin rights if u use windows ? yes
Do u have the latest version of Flashtool ? yes 0.0.9
Do u have all the drivers installed for your device ? yes
Do u try PCC to go back to Stock Rom ? busy downloading now to try fix but i can't put into "download mode" so not sure what to do there.
Any thanks would be appreciated
Random_Sheep said:
Hy gus
I have a similar problem and i tried to follow the pdf that was provided but when i do i boot into xrecover 0.3.
info as follows:
Are u on locked bootloader or unlocked one ? AFAIK it was
Do u run Flashtool with admin rights if u use windows ? yes
Do u have the latest version of Flashtool ? yes 0.0.9
Do u have all the drivers installed for your device ? yes
Do u try PCC to go back to Stock Rom ? busy downloading now to try fix but i can't put into "download mode" so not sure what to do there.
Any thanks would be appreciated
Click to expand...
Click to collapse
Buy download mode do you mean flash mode? Flashmode = phone off & unplugged, then while holding the back button plug in usb to pc. Should only get green led, no screen.
~Jaramie
from my LT28at rooted & eating an Ice Cream Sandwich
Spent all day trying to get cyanogen mod onto my phone but I can't install CWM or Xrecovery. Does anyone have a working way of installing a recover app
Go to this Thread
http://forum.xda-developers.com/showthread.php?t=1568792
form download section download the Kernel Installation Package for Xperia phones
Link : http://www.mediafire.com/?c0u0kf0ud5jvkhk
download a kernel u like (look for them in the All Roms in one Thread - development portal)
extract the Kernel installation package
put the .img file for the kernel in the extracted folder
rename to boot.img if it's not already renamed
ur bootloader must be unlocked (http://forum.xda-developers.com/showthread.php?t=1730874)
turn off ur phone
plug the usb cable to ur PC or Laptop
hold volume up and connect the usb to ur phone (this is called fast boot mode)
run flash.cmd
wait till it's finished the close it
now reboot ur phone
while u reboot press volume down rapidly
now u r in CWR or recovery
as for Xrecovery i never heard of it
note : the boot.img for the Cyanogen mod is in the CM Rom zip
extract it if you're willing to flash CM
not all kernel works for CM
so use the one that comes with the CM zip
or u can use the Cyanogen Official way : head over to Cyanogen Website
choose ur device
and click on WiKi
why can not you install the CWM ato recovery? you device must be root first,if you instaling it
Could it be, that your bootloader is still locked?
With locked bootloader, you can't install cyanogenmod. You must flash a custom kernel, like Un.Knowen said!
If you don't want to unlock your bootloader and loose warranty or play with the testpoint method, you will never be able to use cyanogenmod!
Hi all, i made a terrible mistake and installed cyanogen 10 for nexus 7 on my protab2xxl tablet.
Is there any way to save my tablet?
Cant use touchscreen so im using mouse/keyboard, but i tried 100 ways to fix it and cant do it.
Recovery mode always goes to Android 3e and not CWM, so im getting "signature verification failed" error
and i cant install the correct cyanogen mod.
Also tried with nexus tool without any luck.
If anybody can help, it would be much appreciated. I will PayPal $10 if somebody helps me to fix this tablet.
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
yash.pranjale86 said:
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
Click to expand...
Click to collapse
i have no idea how to do steps 2 and 3
do i need now drivers for nexus 7 or protab2xxl?
how to install them? i tried with live suite but its not recognizing the tablet.
how to boot into download mode?
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
yash.pranjale86 said:
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
I downloaded the drivers, but there is no exe files:
i50.tinypic.com/bi0zvd.png
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
yash.pranjale86 said:
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
Click to expand...
Click to collapse
I use Windows 7 64
I downloaded the lates firmware: 10 inch TAB-PROTAB2XXL(4.1)-Android 4.0-20120409.zip
Inside there are 3 folders: LiveSuite, 10 inch TAB-PROTAB2XXL(4.1)20120409, UsbDriver
In UsbDriver there are 7 files and non of them is .exe:
usbdrv.inf
usbdrv.sys
usbdrv_AMD64.sys
usbdrv_IA64.sys
usbdrvi64.cat
usbdrvx64.cat
usbdrvx86.cat
I also tried to install with "Device Manager", but when i click on UsbDriver it gives me empty folder.
Sorry i cant post image links. I dont have 10 posts yet.
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
yash.pranjale86 said:
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
Click to expand...
Click to collapse
I think im going to break the fking thing. Im on the edge of my nerves.
I manage to reset it to its original android 4.03 and touchscreen is working now, but
still getting the same "signature verification failed" error when in recovery mode 3e.
Also, tablet is not recognized by ROM Manager CWM, so booting to that recovery and
toggle between signature verification option is not an option.
I think there is no "download mode" on this tablet.
Anything else that you suggest? Im running out of options and the tablet already
received couple of punches. Not sure how long is going to last.
i guess download mode is the recovery mode? When android is on his back?
Anybody got any advice?
SuperOneClick says that my tablet is rooted, but SuperUser cant gain root access. Also i installed Titanium Backup and its same, cant gain access to the root.
What else can i try? Is this tablet lost?
Did u tried to install the USB drivers from the method given in PDF file
Use z4root to root ur tablet.
Thank You Yash for all your help. Finally managed to install Cyanogenmod.
So wow ur done ......
Sent from my A60 using xda app-developers app
hello to everyone
i am new to this forum, and i have some questions about JB ROM for xperia Mini Pro SK17i
my xperia mini pro is rooted, and i also have CWM on it, only thing that i have not done is unlock bootloader, and unlocking is allowed
i want to install this JB ROM on my xperia - http://forum.xda-developers.com/showthread.php?t=2032900
now my question is, what i need to do, or to be precise, what to wipe in CWM to install this, and do i need to unlock bootloader first to be able to install JB ROM ??
do i need to wipe data, wipe cache, wipe dalvik, or only data ???
i wanted to post in thread for the ROM, but since i am new here, i am not allowed to do so
so if someone is willing to help me, and give me advice what to do i will be gratefuller
i now how to flash kernels and that stuff, but this is my first tryout with custom ROM, and i don't want to mess up my phone
Very easy, but first you need to unlock your bootloader. Use this tool to unlock the bootloader, here. Link for the tool here.
Then:
Flash boot.img (in the zip)
Install Zip (Rom)
Install Gapps
Wipe data (do this first and only once and never do it again)
You can also read my FAQ for JB 4.2.2 here, for clarify some doubts you may have
P.S: Ignores the post by radwan020, he is a little confused.
best rom
dev0lver said:
hello to everyone
i am new to this forum, and i have some questions about JB ROM for xperia Mini Pro SK17i
my xperia mini pro is rooted, and i also have CWM on it, only thing that i have not done is unlock bootloader, and unlocking is allowed
i want to install this JB ROM on my xperia - http://forum.xda-developers.com/showthread.php?t=2032900
now my question is, what i need to do, or to be precise, what to wipe in CWM to install this, and do i need to unlock bootloader first to be able to install JB ROM ??
do i need to wipe data, wipe cache, wipe dalvik, or only data ???
i wanted to post in thread for the ROM, but since i am new here, i am not allowed to do so
so if someone is willing to help me, and give me advice what to do i will be gratefuller
i now how to flash kernels and that stuff, but this is my first tryout with custom ROM, and i don't want to mess up my phone
Click to expand...
Click to collapse
this is best rom rely its good rom and stable http://forum.xda-developers.com/showth
radwan020 said:
this is best rom rely its good rom and stable http://forum.xda-developers.com/showth
Click to expand...
Click to collapse
He did not ask for best rom
Besides, the links dead (incomplete)
Regards
-N
mauam said:
Very easy, but first you need to unlock your bootloader. Use this tool to unlock the bootloader, here. Link for the tool here.
Then:
Flash boot.img (in the zip)
Install Zip (Rom)
Install Gapps
Wipe data (do this first and only once and never do it again)
.
Click to expand...
Click to collapse
can you please explain how to flash boot.img
i have flashtool installed, so how do i need to set it up to install that
and for wipe data, i need to wipe that after installing gapps or ??
dev0lver said:
can you please explain how to flash boot.img
i have flashtool installed, so how do i need to set it up to install that
and for wipe data, i need to wipe that after installing gapps or ??
Click to expand...
Click to collapse
First u need to install all the drivers in flashtool/dricers
Then start flashtool, select lightning button, choose fastboot mode, and choose your boot.img file
Connect your fone in fastboot mode (vol up and connect)
It should begin flashing.
If u don't want to go through all that trouble, you can see the kernel flasher in my sig
Regards
-N
mnishamk said:
First u need to install all the drivers in flashtool/dricers
Then start flashtool, select lightning button, choose fastboot mode, and choose your boot.img file
Connect your fone in fastboot mode (vol up and connect)
It should begin flashing.
-N
Click to expand...
Click to collapse
thanks for response
but i have installed already flashtool, i needed it to downgrade kernel so i can root the phone, so i have drivers
now i only need to unlock bootloader, but it seems that i have some problems, i will try on my gf's lap with win 7, because on my win 8 lap i can't unlock bootloader with SE Bootloader_Unlocking_Relocking 1.6, and i have flashtool with drivers installed and also SDK manager installed
i can't get the unlock code with the program, but i got it from SE site
after manually entering IMEI and unlock code an clicking unlock bootloader nothing happens and program freezes
i need to try option over SDK and CMD, if that is not working then i will post screenshots for problems i have
Well u could try unlocking it mannually.
U know, the hard way. Then u can flash kernels
Regards
-N
mnishamk said:
Well u could try unlocking it mannually.
U know, the hard way. Then u can flash kernels
Regards
-N
Click to expand...
Click to collapse
is there any way to install drivers properly on win 8 ??
because i am using them, and drivers always fail to install with flashtool 0.9.10.1, few of them only installs, others no
i tried on my gf laptop with win 7, and there drivers install with no problem, but then i have problem with unlocking bootloader with flashtool
in flashtool it says that my bootloader is unlocked, but my configuration says unlocking available, not unlocked
i did not manage to try this method on her laptop because i did not have enough time - http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 - but on my laptop, since drivers are not installed properly i am unable to unlock it, when i enter command in CMD to check version of fastboot i am getting waiting for device, and nothing happens
also automated unlocker, SE bootloader unlocker 1.6, also does not work, program freezes when i click unlock bootloader
here are pictures of flashtool and my configuration
Have you installed Microsoft .NET Framework 2.0 or higher to run stable , as the OP saying? I use that tool on my w7 64bit without any problem. Have you installed the Flashtool-drivers that is inside the SE Bootloader_Unlocking_Relocking tool?
mauam said:
Have you installed Microsoft .NET Framework 2.0 or higher to run stable , as the OP saying? I use that tool on my w7 64bit without any problem. Have you installed the Flashtool-drivers that is inside the SE Bootloader_Unlocking_Relocking tool?
Click to expand...
Click to collapse
i have Microsoft.NET Framework 3.5 currently and 4.5
i have tried to install flashtool divers that came with flashtool 0.9.10.1, and the one with SE Bootloader_Unlocking_Relocking, but with both i got errors (red crosses) that shows they failed to install
dev0lver said:
i have Microsoft.NET Framework 3.5 currently and 4.5
i have tried to install flashtool divers that came with flashtool 0.9.10.1, and the one with SE Bootloader_Unlocking_Relocking, but with both i got errors (red crosses) that shows they failed to install
Click to expand...
Click to collapse
Windows 7 or 8? 32 or 64bit? Try this tutorial, here. Remember to unlock bootloader you need to unable USB debugging.
mauam said:
Windows 7 or 8? 32 or 64bit?
Click to expand...
Click to collapse
i have windows 8 x64
dev0lver said:
i have windows 8 x64
Click to expand...
Click to collapse
It works just fine for me with w7 64bit. Have you enabled the USB debugging? How to enable: Settings ->Development options and Selected USB Debugging.
mauam said:
It works just fine for me with w7 64bit. Have you unabled the USB debugging.
Click to expand...
Click to collapse
i have tried guide you gave me above, but on my win 8 is not working because drivers fail to install
i did not have time to try that option on my gf laptop
i have enabled USB debuging, Unknown sources and USB connection is MSC
dev0lver said:
i have tried guide you gave me above, but on my win 8 is not working because drivers fail to install
i did not have time to try that option on my gf laptop
i have enabled USB debuging, Unknown sources and USB connection is MSC
Click to expand...
Click to collapse
So the solution is to try it in your girlfriend's lap. Sorry.
mauam said:
So the solution is to try it in your girlfriend's lap. Sorry.
Click to expand...
Click to collapse
i will try in a few days when she comes to me
Nope you can easily get it working. Just serach for disabling driver signature enforcement in win 8. Do it and then install drivers.
Also if you are on the go but get access to a pc, you can try kernel flashing tools (see sig) to flash kernels without installing any drivers
Regards
-N