I have a question for you guys:
My new Titan brand Vodafone has firmware 1600.2200.20501.165
I think is old, and i'd like to update with 1600.2200.20501.401 but Zune tell me there is no update for my phone.
It's is possible to force the firmware via cab sender or anything else (it was possible with my old Omnia 7)?
If yes where i can find a guide to do that?
It is possibile to upload a nobrand firmware to remove the Vodafone brand?
Thanks for the reply!
Sorry for poor english
nyonik said:
I have a question for you guys:
My new Titan brand Vodafone has firmware 1600.2200.20501.165
I think is old, and i'd like to update with 1600.2200.20501.401 but Zune tell me there is no update for my phone.
It's is possible to force the firmware via cab sender or anything else (it was possible with my old Omnia 7)?
If yes where i can find a guide to do that?
It is possibile to upload a nobrand firmware to remove the Vodafone brand?
Thanks for the reply!
Sorry for poor english
Click to expand...
Click to collapse
Using Gold Card + Y-cable method to flash 2.05 EU Rom.
http://forum.xda-developers.com/showthread.php?t=1597837
Pictures for example by myself:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goldcard working!
but with this vodafone bootloader u cant flash the 2.05 rom!
just flash the new bootloader from htc webside and then flash the 2.05 rom
here the bootloader!!!!! flash first!!!!!!
http://dl4.htc.com/managed-assets/s...e/htc-titan-zune-RUU/spl_2.6.160015.3_WWE.exe
after that u can flash the unbranded shipped 2.05 rom with goldcard
That's really interesting!
I have already flashed the firmware from htc site!
So, i can use a common micros SD that i already posses and i only need to buy the Y usb cable and than i can upload the unbranded rom to my titan?
Do you thing that is a good idea to do that ?
Whare can i download the rom to upload ?
Thanks to all of you guy!
nhathoa
How is your AT&T HTC Titan PI39100 after this upgrade using Gold Card + Y-cable method to flash 2.05 EU Rom?
Does it totally functional (software and hardware) without any AT&T customizations? Did AT&T 2nd Boot Screen also disapear?
Could you please post a picture of your Settings => About (with full informations)?
After this HTC upgrade is it possible still upgrading direct from Zune like HTC Titan (EU) genuine or Y-Cable process will be everytime necessary?
Best regards,
I would be interested in getting the firmware as cabs because my device is half bricked, but cab sending still works.
It's my only hope to fix SPL, afaik
link68759 said:
I would be interested in getting the firmware as cabs because my device is half bricked, but cab sending still works.
It's my only hope to fix SPL, afaik
Click to expand...
Click to collapse
Hi link68759,
Did it worked to fix your HTC Titan AT&T?
I'm also owner of a Titan AT&T PI39100 with SIM Card Unlocked and still thinking if I will or will not HSPL it:
SPL - 1.10.160015.3 (132409)
eMMC SAMSUNG 15028MB
Touch A(F:81, ID::1, V11, B:F8)
Radio - 16.23.02.26A
I'm concerned if something goes wrong how to recover to original ROM + SPL.
Regards,
I tried many times but i can't update the rom
I tried this:
- i have downloaded this rom: http://www.filefactory.com/file/1ybq4xqcazyp/n/IMG_Eternity_HTC_Europe_2.05.401
- i have bought the Y cable and the famale-fame usb
- i have formatted the miniSD in FAT32
- i have renamed the rom in ETERIMG.nbh and copied to the miniSD
- run goldcartool and patched the miniSD with goldgard.img
- i have insered the miniSD in the miniSD reader, then, the miniSD reader with the Y usb cable
- 1 side of the Y usb cable connected to the pc
- 1 side of the Y usb cable connected to the phone
- restart phone in USB HOST mode but it always show me "Entering USB Mode"
and the upload does not begin....
what am i doing wrong ???
Related
Hi to all
Its possible extract a rom from a tytn and install this rom so other tytn???
or we must use the ship version???
if it is possible how can we extract a rom and how we can convert it to flashable rom???
Thx
Short answer: It is not possible yet, you must wait for a shipped version.
Long answer: A ROM consists of 7 parts:
1. Extended ROM
2. OS Image
3. IPL (part of bootloader)
4. SPL (part of bootloader)
5. Splash screen
6. HTC Logo (normally uses the same image as the splash screen)
7. GSM radio code
You can dump the original rom, but only the things contained in the FLASH will be dumped, this does not include the IPL, SPL, splash and radio parts, so its unuseful for flashing it back.
I've updated the wiki with this answer, see here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Thx
For the Vv (very very) clear answer...
Please Help
Hey pof.
I was wondering if you could point me in the right direction with my problem.
I've tried to upgrade my HTC Tytn original ROM to JasJam ROM , right at the end (99%) the updating software stoped , gave me an error and restarted the computer. Now all i see on my tytn is dots with mixed colours all over the screen(not even a tri-color mode) it looks like a broken tv. Now i can't even sync it with my PC to install old ROM. Can't do anything with it now. the reason for this i guess is a ROM update that wasn't completed.
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Please help. Iam really desperate
slava888 said:
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Click to expand...
Click to collapse
Does it look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) try SD card flashing:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
2) If it doesn't work, put the unit in bootloader mode, disable activesync usb on your computer (Connection settings -> disable USB connection) and try to flash a ROM using the usual method.
Other than this... I can only tell you trying to get a repair under warranty
Hey pof. Thanks for the quick reply.
That is exactly how it looks !
Listen, somehow i've managed to get in to bootloader.
It shows on top:
HERM200
IPL-1.01
HERM200
SPL-1.04
I've tried to do the SD Rom update but it doesn't work. Just shows me the same bootloader screen with those two messages(above). Pushing the powere button doesn't do anything
The bootloader update didn't work either. when i typed in "set 14 0" it said "Write Nand Success" but when i soft reseted it , it still gave me that screen.
Any ideas what i can do? other then send it for repairs.
Thanks again.
Hope to hear from u soon.................iam freaking out here
Just tried SDCardFlashing with different ROM files.
With the original ROM it does not do anything (stays in the bootloader screen)
With JasJam (that's the one i've tried to install) it show "checking..." message on screen , but does not do anthing.............been like that for 10 minutes.
Can't believe i've screwed up so bad
At least bootloader is still "intact", the right NBH file should be the one matching your CID, assuming that you have a TyTN it should be the TyTN 1.18 rom.
If you can go into bootloader and send commands using mtty check your CID with command "info 2".
Also try to do a rom upgrade using the usual proces while the unit is connected in bootloader mode and activesync usb disabled, click on RomUpgradeUt.exe, then Next ,next, next... if it fails tell me which error you get and where.
Hey Pof.
when i try "info 2" command , it just hangs without any output. and i can no longer type in commands.
I've tried to run RomUpgradeUt.exe
This produced ERROR[222]: DEVICE NOT RESPONDING. I get it at the end , after the updater asks me for final confirmation.
...............................
Read this thread, from post #11 until the end
http://forum.xda-developers.com/showthread.php?t=278025
Try to put USB monitor (instructions on post #11) and see if you get any output from the device... attach the USB capture here if you want, I can have a look at it.
Hey Pof.
Did everything like you said.
Here is the output.
P.S: didn't allow me to upload WinAce archived files so i upload the text file, its pretty small.
slava888 said:
Did everything like you said.
Here is the output.
Click to expand...
Click to collapse
The RUU sends "task 32 ; info 2 ; info 3" commands to bootloader, but you get no output from it, I think it's screwed because none of the three commands is answered by your device.
Normally, task 32 should return the seclevel, usually 0xFF ; info 2 should return the CID (in TyTN it is QTEK_001) and info 3 should return the block to calculate the dynamic password to be able to use wdatah command. Without wdatah you cannot flash
Do you have warranty on your device?
Yes its still under waranty , i purchased the device couple of weeks ago. Iam going to call them today.
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Just wanted to tell you that i really appreciate your effort. Thank you for everything.
slava888 said:
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Click to expand...
Click to collapse
HTC has not "officially" released any rom for the hermes yet, the tytn rom we have on the ftp is leaked from dangaard NL, so you cannot say you've been trying to upgrade the rom because they will tell you there are no rom upgrades available yet.
If you are not in a hurry to have your phone back you can wait until they release a ROM upgrade and then tell them the "truth"... but i don't know if they will be able to see that you flashed Imate ROM and not HTC ROM (and flashing another brand's rom voids your warranty). If they don't notice it, the repair should be under warranty and no charges for you.
If you are in hurry, just tell them you tried to flash the imate jasjam rom (downloaded from imate ftp) and phone screwed, they will charge you some money to repair / flash back the original htc rom on your device and return it to you, but you'll have to pay because this is not covered by the warranty.
I don't know how much will they charge you for this, but you can explain them by phone and ask...
Is it possible to go back to an AT&T Rom without problems after (what I think) having SSPL installed? What happened was that I had a retail WM5 on it, then went to VP6's Rom, then found the AT&T official Rom and installed that. If the final comes, and I run it, will I have issues??
Thank you
MakaveliReturns said:
Is it possible to go back to an AT&T Rom without problems after (what I think) having SSPL installed? What happened was that I had a retail WM5 on it, then went to VP6's Rom, then found the AT&T official Rom and installed that. If the final comes, and I run it, will I have issues??
Thank you
Click to expand...
Click to collapse
Yes, you can (See mrvanx.org and look for downgrade guides)
No, you won't have issues.
todd_jg said:
Yes, you can (See mrvanx.org and look for downgrade guides)
No, you won't have issues.
Click to expand...
Click to collapse
Other than the issues that the bloatware official will give you!!
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Theres a direct link.. I just got thru doing this with no problems. I would flash the radio/original rom first before downgrading the spl.
Thanks guys.
One more question, if I have WM6 (ATT "official" release from this site) can the user later upgrade to an official WM6 ROM from the htc site? I am asking this because I will be selling my 8525....
MakaveliReturns said:
Thanks guys.
One more question, if I have WM6 (ATT "official" release from this site) can the user later upgrade to an official WM6 ROM from the htc site? I am asking this because I will be selling my 8525....
Click to expand...
Click to collapse
Sure. You will need to unpack the official HTC rom and put the nbh file in a folder with the custom_ruu. It won't flash using the ruu shipped from HTC, but it is a piece of cake.
You just unrar the exe file and pull the nbh out, drop it in a folder with custom_ruu and you're off.
Thank you
By the way, if I downgrade to a retail SPL, will I lose the subsidy unlock? I unlocked my phone via a code from AT&T.
Thanks again!
MakaveliReturns said:
By the way, if I downgrade to a retail SPL, will I lose the subsidy unlock? I unlocked my phone via a code from AT&T.
Thanks again!
Click to expand...
Click to collapse
Well, I have never unlocked my Hermes using the code from AT&T. I have always done it via pof's unlocker. Reflashing has never relocked my device or any other that I have seen. So, I think that you are safe.
Also, I believe that the unlock code is calculated using an algorithm based on the IMEI number. So, even if it did relock, the code SHOULD unlock it again.
If all that fails, just use the unlocker that pof made!
Thanks to everyone for their time.
I currently downgraded to SPL-1.06
When I run the retail ROM that is:
RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship
I get a crash that says this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just want to have the ability to update to retail ROM's whenever I can without extracting the exe files and running them manually.
To tell you the truth, I am selling this to a buddy and he's not really computer literate, so I don't want to help him out every second. He needs to upgrade to the retail AT&T ROM for the 8525 once it's out in a month or two. Right now I am giving him the AT&T (beta) rom that I found on this site.
Any help would be appreciate it.
MakaveliReturns said:
Thanks to everyone for their time.
I currently downgraded to SPL-1.06
When I run the retail ROM that is:
RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship
I get a crash that says this:
I just want to have the ability to update to retail ROM's whenever I can without extracting the exe files and running them manually.
To tell you the truth, I am selling this to a buddy and he's not really computer literate, so I don't want to help him out every second. He needs to upgrade to the retail AT&T ROM for the 8525 once it's out in a month or two. Right now I am giving him the AT&T (beta) rom that I found on this site.
Any help would be appreciate it.
Click to expand...
Click to collapse
Looks like Vista. Have you checked out MrVanx guide for Vista flashing?
Yes, Vista is working fine for flashing and I've followed that guide and it all works. I've flashed this phone without problems through Vista and ActiveSync for Vista.
Anyone, any ideas?
Quite some time ago, when HD2 was brand new, there were some people around with unofficial beta-ROMs on their devices. Don´t exactly know what was going on, but I am quite sure the search function will bring this or that into light for you.
Maybe flashing with a Goldcard might help, not sure. But apparently, your SPL seems to face troubles, no wonder you´ve got freezes etc.
Did you try to flash something older than the 3.14 stock ROM? A lot of users are not happy with this anyway...
Also, older SIM cards or some SD cards can cause issues, did you try to flash without those in the device?
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Bruno Kreisky said:
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Here is the picture from working HD2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is picture from non-working HD2
As you can see, the difference is in first line "PB 81100" and "PB 81***" I think I have to improve here but not glue how to???
Update:
And now it becomes really strange. I already flashed the strange phone with Stock ROM from SD-Card so you can see above. After that I did a flash with latest ARTEMIS ROM and SSPL_RUU and the following Boot Screen appears
So before flashing there was SPL 3 on phone, while flashing there was SPL1.42.6666 on phone and after flashing there is SPL 3 again on phone???
Click to expand...
Click to collapse
Sir, SSPL works only for 1 (one) cycle. After you reboot the phone, your SPL will return to the original one (the one before SSPL).
SPL 1.42.6666 is only a temporary SPL modifying your actual/original SPL.
Cheers
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Bruno Kreisky said:
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Click to expand...
Click to collapse
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
silverwind said:
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
Click to expand...
Click to collapse
As I wrote above (maybe bad english), I flashed both mobiles with latest Stock-Rom (downloaded from htc.com/de) via, SD-card. Both mobiles were sold from same Mobile provider in austria with same SIM-lock. But, they were un-SIM-locked differently. Now, one is working smoothly (the one with PB81100) and one freezes almost (the one with PB81***) and GPS is working really, really badly in comparison to the other one.
EDIT: GPS is completly NOT working on device with PB81*** on Boot-Screen :-(
Push this thread!
hi,
i have also an htc hd2 from "3" in austria.
i flasht it to hspl 2.08 without any problems.
but! since i let it unlock it in a mobile-store here in vienna.
the model ID- is now "PB81xxxx".
and now: it is not possible to flash it back.
here are the pics:
pocketpc.ch/htc-hd2-rom-upgrade/126754-sim-sntsperren-kein-flashen-mehr-moeglich.html#post990530
it seams the cnaged the model _ID during unlocking.
Hello and sorry for my english.
I have a Mozart phone but the phone is blocked on bootloader with only one line that say "PD67100 SS-BC (4k)"
no "serial" or "usb" write...
No hard resert possible.
How to resolve this problem ?
Thank
WAIT ....
same problem .. but no solution for now ... we have to wait
boot loader blocked
same here no usb no serial
That is interesting to see...What countries, networks, branded or otherwise did you get the phone with?
My phone is on Orange France.
I just look at mine - it is the same loader,
From my experience the Boot loader screen should always display Serial, even when not connected to a computer. In my 7 years of supporting HTCs - I have never seen the issue you describe.
I've got the same problem.
If anyone will find solution of that problem please write it here.
Same prob here on HTC unbranded version. Hard Reset and Checksum possible, but no usb-connection in bootloader.
I am also having the same problem. = / No connects bootloader mode.
same problem:
just without vender id. instead pd67100 there are differend characters.
I think this happens coz of RSPL/HSPL hack
I don't really like flashing these roms as they may result in destroying your phone.
I just like ROMs coming from ansar.
I hope you all find a solution.
As long as your are careful and follow the guides and read everything then there should be no issues with flashing ROMS to devices "ansar" ones or otherwise.
Hi all ,i have the same problem ,on my screen i read only
PD67100 SS-BC (4K) ,nobodys know a solution at this problem?
"PD67100 SS-BC (4K)"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
means your device now in half brick condition, and not yet solution till now (but it with jtag it may possible i think)
for this question or similar with that, please refer to this thread and make sure you read carefully missing step or instruction can make our mozart going brick or maybe half brick
Cotulla said:
Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.
Click to expand...
Click to collapse
Does anyone know if this problem can be solved using the GoldCard?
Hello ,any news about this problem?
Nicolas Alves said:
Does anyone know if this problem can be solved using the GoldCard?
Click to expand...
Click to collapse
I've been told that Goldcard will not help to replace the SPL with an older version so won't get you out of the situation that stops you flashing ROMs of your choice. However, I would expect it to still be possible to use Goldcard to change a ROM.
f
The only way to unlock the boot via jtag repair. Tested and works on Mozart,
Fixed!!
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
thecraziest77 said:
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
Click to expand...
Click to collapse
Nothing like that here - just says up-to-date. Which ROM did you use before?
1. Possibility to choose one from several NBH files. Files should be placed in one folder with utility.
2. Possibility to choose the way (option) of flashing
3. Possibility to get NBH file info (Modification date, Model ID, CID, Version, Lang, Chunk size)
Regular RUU (Task 28)
Hard Reset is performed straight after flashing automatically (good for NBH containing OS section)
Custom RUU (Task 00)
to install only radio roms without performing hard-reset.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Custom ROMs can be flashed if HSPL is installed to device (no idea when it will be ready or published)
Utility was tested with official Titan roms - thanks to AndrewSh and Feropont
ATTENTION! Unskilled interference to your phone's OS can totally crash your device.
If you understand what are you going to do - go ahead.
No warranty.... use on your own risk.
thanks alot barin.
Thank you buddy, good job
Excellent and very convenient tool - thank you very much my friend.
For those who will use it with official nbh - remember that process is "freezing" at 5% - re-flashing spl - so don't worry - just wait with patience. It will continue faster after spl update.
Also remind - how to get to bootloader mode - switch the device off, press and hold Volume Up and Down simultaneously and turn the device on. Then connect USB cable.
Titan Advanced RUU and nbh file should be placed in one folder on your PC.
Thank you, good job
Thank you , good job
Thank you so much!!!!
hi, sorry for the question but with this tool, does it mean that i can flash a taiwan ROM on my european htc titan ? or is it still restricted to the only ROMs from europe ?
xtrememanix, this tool is just Update utility - flasher. You should wait for HSPL to flash another region to your device.
Man... seem that HSPL for HTC Gen2 is coming!!!! LOL.
nhathoa said:
Man... seem that HSPL for HTC Gen2 is coming!!!! LOL.
Click to expand...
Click to collapse
No info, dude, if it's coming or not.
Actually Titan Advanced RUU has no connection to HSPL discussions ans speculations. It's the same situation as with OsBuilder - current public version supports WMSTORE (second gen devices rom structure) but there's no way to flash custom second gen roms.
nice tool..thx4that....yeah thats right..building a rom is not the problem...the bootloader is it..hmm...someone here can contact cotulla or other people from the dft team 4 some news?..
Sent from my OMNIA7 using Board Express
So with task28, when it finish flashing ROM to my Titan, and just wait to config into WP7? Don't need hard reset anytime by myself?
Little confusing
My ways of flashing ROM:
Using RUU to flash
After finish. Turn off device and Hard reset it.
With Task28 i dont have to Hardreset anymore, right?
-=Barin=- said:
Regular RUU (Task 28)
Hard Reset is performed straight after flashing automatically
Click to expand...
Click to collapse
GinCifer, if you have a desperate wish to perform one more hard reset manually - go ahead. But it's not necessary.
AndrewSh said:
GinCifer, if you have a desperate wish to perform one more hard reset manually - go ahead. But it's not necessary.
Click to expand...
Click to collapse
Thanks for confirming me
I'm kind of confusing with task29 in WinMo device a little
any chance for a version of this for the HTC Radar?
sh4d0w86, I will point Barin on your request today....
AndrewSh said:
sh4d0w86, I will point Barin on your request today....
Click to expand...
Click to collapse
thanks, AndrewSh. I am willing to test with my HTC Radar.
sh4d0w86 said:
thanks, AndrewSh. I am willing to test with my HTC Radar.
Click to expand...
Click to collapse
Barin offered you to try this Titan flasher with your Radar - it will work.
AndrewSh said:
Barin offered you to try this Titan flasher with your Radar - it will work.
Click to expand...
Click to collapse
tried it. it stopped at 5% on phone, 6% on PC. must be my Radar... tried using a Radar RUU with same luck. my Radar won't boot out of the Bootloader. had ordered a y-cable, was going to try Goldcard method.