Related
I rooted my device using Gingerbreak.
I have 2.2.2 installed out of the box. I installed CWM. I installed busybox.
Busybox failed. I tried all the versions that it contains.
I checked root status, and RootCheckBasic says I'm rooted.
I installed Flash ClockworkMod Recovery. It will not reboot to CWM.
It only reboots to the standard Android recovery.
I'm trying to install Bumblebee ROM 2.4.
Here are some things I am having issues understanding with it...
Backup current apps and their data with Titanium Backup (available in the Market). Is this required? The phone is new. I have nothing to back up.
Do a nandroid backup in recovery before doing anything else below.
And the nandroid backup is done with CWM? Again CWM won't reboot, only the standard Android recovery boots.
Required if installing BB 2.x for the first time: Wipe. Wipe it all. Data, cache, system, dalvik-cache, sd-ext if you've got it (might need to look under Advanced or Mounts in recovery to do the last two, and while you're there format /system). I assume you wipe it all with CWM while in recovery?
If upgrading from BB 2.3, wipe cache (and only cache) in recovery.
Does not apply to me
If not upgrading from 2.3, install Wiper zip (see below), just to be extra sure that all is wiped. Don't reboot yet. Installing wiper.zip is done by sideloading using adb commands?
Install ROM zip (see below).
I assume this too is done by copying the zip to the external SD, then selecting update from SD card in recovery... right?
Please someone shed some light on this for me.
In standard Android recovery it says e3. I know on my Captivate I had to use Odin to install GB loaders to get it to work.
THANKS!
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
tvall said:
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
Click to expand...
Click to collapse
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
bulltproof said:
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
Click to expand...
Click to collapse
Oh, okay, um... are you using the reboot into recovery option in rom manager right after flashing?
After flashing what?
I reboot into recovery through rom manager and get:
Android system recovery <3e>
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
_________________________________________________________
Android System recovery...
Do not pull out the battery!!
After hitting flash clockworkmod recovery, immediately hit reboot recovery
After hitting anything in CWM it did nothing more than reboot into the standard android recovery.
This phone has 2.2.2 on it. Problem? Probably.
I followed instructions at androidcentral and got it to work.
Needed Xionia_CWMA_12518.6_VM
Installed BACKside-IHO-VM670-11222011
using Xionia_CWMA_12518.6_VM_Recovery-signed
Had a little problem today and needed to activate the phone. BUUUUT......
the rom didn't allow activation.
So I installed Bumblebee. No go.
Then I tried [rom] basic stock rom.
Neither of these will let my phone boot. It gets stuck at boot.
Nothing happens.
I can still boot into Xiona_CWMA. But no roms will work.
PLEASE HELP!!!!
Dude i m noob, and i m facing same problem,
I did root with super one click soc, and it is rooted and i am using root needed apps,
But when i m trying to clobk work recovery (i did flashing CWR from rom manager and aft that i select boot from cwr option from rom manager) it just factory reset i did this 3time all time just factory reset, then i again did but while rebooting i click home button so it gave me same option which came to above member said some e3............
And i try to select any option from it with menu button it was not applied, and no use so i removed battry and place again and start then device started dont know more what to do, help
Sent from my LG-P500 using Android-HQ App
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Bullet if u found solution pls tell me too
Sent from my LG-P500 using Android-HQ App
bulltproof said:
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Click to expand...
Click to collapse
I believe that may be due to the newer display in your phone (I'm new to this device so I dont know much yet). From the little bit of information I've gathered, devices manufactured recently have a different display that requires a kernel that supports it. In the iho roms this is included, on others you'll need to flash a kernel right after the rom.
For the stock rom I can upload what I use if you need it. Its basically the one posted here just with the boot.img swapped with one from a nandroid backup I made before switching roms
I think you're spot on with that idea.
I loaded CM7 variant, and it worked.
My question is, how do I get another ROM on it if it has the newer screen?
I loaded different kernels that were supposed to fix it, but no go.
My P500 hasn't been co-operating AT ALL lately. Every custom ROM that I flash and try out gets stuck in bootloops after rebooting. I don't flash anything apart from what the developer says to flash, but I always get stuck on bootloops. Also, whenever I try restoring a nandroid backup, it gets stuck in a bootloop as well. Every reboot causes a bootloop. What am I doing wrong?
johnafer said:
My P500 hasn't been co-operating AT ALL lately. Every custom ROM that I flash and try out gets stuck in bootloops after rebooting. I don't flash anything apart from what the developer says to flash, but I always get stuck on bootloops. Also, whenever I try restoring a nandroid backup, it gets stuck in a bootloop as well. Every reboot causes a bootloop. What am I doing wrong?
Click to expand...
Click to collapse
It could be your sd card causes. Try to use another sd card and install a rom. Just a suggestion.
recreation012 said:
It could be your sd card causes. Try to use another sd card and install a rom. Just a suggestion.
Click to expand...
Click to collapse
Hm, never thought of that. I'll test it out tonight and I'll get back to you.
Do you clear data, and system and boot before flashing?
Seek the signature below the line
Bootlop is normal when recovering a nandroid backup trough cwm
Try wipping cache, dalvik cache, data and /system, them flash.
Sent from my LG-P500 using xda premium
FPChaim said:
Bootlop is normal when recovering a nandroid backup trough cwm
Try wipping cache, dalvik cache, data and /system, them flash.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yeah, I do all the prerequisities everytime I flash a new ROM. Wipe Data, Cache, dalvik, /System, but it still bootloops.
Right now I'm on CM7.2 Nightly with Stock kernel, but I wanna test some other ROMs to help out with development. Of course, I can't because of this bootloop issue.
johnafer said:
Yeah, I do all the prerequisities everytime I flash a new ROM. Wipe Data, Cache, dalvik, /System, but it still bootloops.
Right now I'm on CM7.2 Nightly with Stock kernel, but I wanna test some other ROMs to help out with development. Of course, I can't because of this bootloop issue.
Click to expand...
Click to collapse
Use amonra. It is better than cwm 5.0.2.7
Sent from my LG-P500
bootloops
try flashing a lg 2.3.3 stock rom then flash something else i had the same problem that fixed it
I already am using AmonRa - forgot to mention.
I did notice in the phone info for each ROM I use, the baseband would have some weird characters like ".\*@ ../?" rather than the "LGP500 V20G etc etc" that it should have. So, I re-flashed the new baseband via LGMDP.exe and now I'm using the AOPK APHONETHATIUSE custom ROM and it seems to be fine.
I also did reformat and partition the SD card just to be sure that there's no problems with that.
I'll use it for a while and I'll see what happens.
I had the same problem flash it with v20g first with kdz and u can use it in any manner; )
Sent from my LG-P500 using xda premium
lg p500 bootloop after installing custom rom
i just now installed custom rom CM7 RC1 with Bravia display Hack, Beats audio and Xloud ! and got stuck into bootloop(showing an animation and stuck)......
i can't go back to clockmod recovery by pressing volume down key+power.....is there any way to get my phone back? or throw it to dustbin???
samganesh said:
i just now installed custom rom CM7 RC1 with Bravia display Hack, Beats audio and Xloud ! and got stuck into bootloop(showing an animation and stuck)......
i can't go back to clockmod recovery by pressing volume down key+power.....is there any way to get my phone back? or throw it to dustbin???
Click to expand...
Click to collapse
If it is able to boot into emergency mode, use kdz updater.
Sent from my LG-P500 using xda premium
lg p500 bootloop
i just now installed custom rom CM7 RC1 with Bravia display Hack, Beats audio and Xloud ! and got stuck into bootloop(showing an animation and stuck)......
i can't go back to clockmod recovery by pressing volume down key+power.....is there any way to get my phone back? or throw it to dustbin???
try volume down + home + power...
A million times thanks ManBearr !!!!
ManBearrrPig said:
try volume down + home + power...
Click to expand...
Click to collapse
u jus saved me !! thanks a lot buddy. pls follow my recent post to see what my issue was... great. thanks a lot .
Hi Guys
Im having some problems trying to install a custom rom into my new Galaxy SIII I9300.
The rom in question is OmegaRom V35
After roooting and all, yesterday i tryed installing the rom with mobile odin, following all the instructions.
The result was the phone rebooted after the instalation seemed to be ok, but got stuck on the booting animation, and never got out of there.
I Had then to inject cwm with odin desktop, wiped data, cache anda dalvik, and then proceed to install the stock rom with desktop odin. All went well and the phone worked great.
I thought that maybe the problem was with mobile odin pro. So today, i went and proceeded to install Omega V35 via CWM. I again put the file on internal sd card, wiped data, cache and dalvik, and the rom started flashing. It all started good but, with no warning, at the mniddle of the installation, when applications were being installed, the phone went automatically and wuickly back to CWM!
Of course the installation wasnt finished, so i was stuck with cwm on reboot. Again made wipe data, cache and Dalvik, tried again to flash Omega V35, and again, the same problem...
In the end, i had to flash the stock rom again.
I searched the forum, but i cant seem to find the problem for this. I followed all the instructions, and had no error messages besides CWM skiping the format of the card, and some message (that i've seen in videos as normal), when wiping Dalvik!
Any clue to what's happening?
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)</b>
JJEgan said:
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)</b>
Click to expand...
Click to collapse
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
rebentador said:
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
Click to expand...
Click to collapse
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
THE.W!ZARD said:
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
Click to expand...
Click to collapse
I had already checked the md5, and the file is ok...
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Amritttt said:
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
None whatsoever. The flashing process seems to be running ok, It starts, i select default instalation, after i can see the apps being installed and suddenly, it all stops and goes into cwm without any message or warning...
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
Which rom did you try to flash and on which firmware were you on? Also what wipes did you do in CWM?
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
umesh840 said:
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
Click to expand...
Click to collapse
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
you have unlocked your bootloader as well....right??
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
2
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
2 suggestions
1. try another recovery if u prefer cwm install another version
2.format
/system
/data
/cache
see what happens then
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
umesh840 said:
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
Click to expand...
Click to collapse
I think Everything will work fine..
Just follow these steps...
In CWM Recovery
Go to Mounts & storage > Wipe cache , wipe data & wipe System
Then Go to Advanced > Wipe Dalvik-cache
and now install your Rom from Sd card
I hope this 'll work..:good:
I have Samsung galaxy Y handset. I just rooted it for trying new ROM. I installed the zip file of klerks and also the custom ROMs cyanocream v3 and paranoid. I switched the phone to recovery mode and clicked 'apply the custom rom' option. And since it wasn't showing the wiping and the other formatting option, I clicked 'reboot' option. And from then the phone isn't running, I see only the Samsung logo it shows on switching. I tried everything, the recovery mode is also not running, took the battery out but still same problem. Can you please crack this problem? I need my phone!
I dont own this device so Im not sure what's the process (although im familiar with the whole galaxy family), but I do wonder, did you install custom recovery (like CWM)? Did you make a backup before applying the ROM?
Can you still access the recovery mode? Whenever i mess up an installation, i usually search for an stock rom and flash it via the external SD card.
Perhaps this might come helpful
http://forum.xda-developers.com/showthread.php?t=2324937
Still Cant!!!
DBThanatos said:
I dont own this device so Im not sure what's the process (although im familiar with the whole galaxy family), but I do wonder, did you install custom recovery (like CWM)? Did you make a backup before applying the ROM?
Can you still access the recovery mode? Whenever i mess up an installation, i usually search for an stock rom and flash it via the external SD card.
Perhaps this might come helpful
http://forum.xda-developers.com/showthread.php?t=2324937
Click to expand...
Click to collapse
i am still not able to run the custom rom.
I rooted my phone.
Opened up the CWM v5, and wiped-data,cache partition, format data, format cache, mounted all drives,---
went into advance to wipe dalvik cache and the other data.
Installed the custom rom by opening the zip file through install zip from sd.
I installed the custom rom (tried all, jellybean, cyanocream v3, paranoid, icecream).....
BUT EACH TIME EITHER IT STOPED WITH Samsung Galaxy Y logo screen OR at logo of cyanocream (when installing cyanocream).
SO I HAD TO FLASH MY PHONE EACH TIME WITH STOCK ROAM THROUGH ODIN. Then it works on its standard android.
I tried many times. Checked all steps. Checked all videoes.
I CANT MAKE OUT WHERE AM I MAKING MISTAKE EXACTLY ?????? Can any one please tell me the most accurate and effective correct method to do this successfully?
himanshutihalht said:
i am still not able to run the custom rom.
I rooted my phone.
Opened up the CWM v5, and wiped-data,cache partition, format data, format cache, mounted all drives,---
went into advance to wipe dalvik cache and the other data.
Installed the custom rom by opening the zip file through install zip from sd.
I installed the custom rom (tried all, jellybean, cyanocream v3, paranoid, icecream).....
BUT EACH TIME EITHER IT STOPED WITH Samsung Galaxy Y logo screen OR at logo of cyanocream (when installing cyanocream).
SO I HAD TO FLASH MY PHONE EACH TIME WITH STOCK ROAM THROUGH ODIN. Then it works on its standard android.
I tried many times. Checked all steps. Checked all videoes.
I CANT MAKE OUT WHERE AM I MAKING MISTAKE EXACTLY ?????? Can any one please tell me the most accurate and effective correct method to do this successfully?
Click to expand...
Click to collapse
I don't own this phone too but my mother has . Did you flash the kernel for custom rom such as 'white xp kernel' for cynocream before flashing the rom? You can download it from the same post you download the rom and you can backup your stock rom in cwm so if anything happen you can boot to cwm and restore it back.
himanshutihalht said:
I have Samsung galaxy Y handset. I just rooted it for trying new ROM. I installed the zip file of klerks and also the custom ROMs cyanocream v3 and paranoid. I switched the phone to recovery mode and clicked 'apply the custom rom' option. And since it wasn't showing the wiping and the other formatting option, I clicked 'reboot' option. And from then the phone isn't running, I see only the Samsung logo it shows on switching. I tried everything, the recovery mode is also not running, took the battery out but still same problem. Can you please crack this problem? I need my phone!
Click to expand...
Click to collapse
search for flashing firmware via odin for your device...
search it and you will get the answer
himanshutihalht said:
i am still not able to run the custom rom.
I rooted my phone.
Opened up the CWM v5, and wiped-data,cache partition, format data, format cache, mounted all drives,---
went into advance to wipe dalvik cache and the other data.
Installed the custom rom by opening the zip file through install zip from sd.
I installed the custom rom (tried all, jellybean, cyanocream v3, paranoid, icecream).....
BUT EACH TIME EITHER IT STOPED WITH Samsung Galaxy Y logo screen OR at logo of cyanocream (when installing cyanocream).
SO I HAD TO FLASH MY PHONE EACH TIME WITH STOCK ROAM THROUGH ODIN. Then it works on its standard android.
I tried many times. Checked all steps. Checked all videoes.
I CANT MAKE OUT WHERE AM I MAKING MISTAKE EXACTLY ?????? Can any one please tell me the most accurate and effective correct method to do this successfully?
Click to expand...
Click to collapse
Try this if you are using CM based roms.
Go to CWM. Wipe data, wipe cache, go to mounts and storage mount all (except SD card) install kernel zip(not ROM zip, use kernel zip) go to advanced NEVER WIPE DALVIK CACHE AND BATTERY STATS WHEN INSTALLING ROM, reboot recocery, you will get mounting error. Ignore it. format all (except SD card). Install rom zip reboot. I have used this many times and no fail yet.
I own this device and if you have any problem feel free to ask.
If you want instructions for any ROM, reply here with Rom's link.
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands