Related
So I tried to use odin to root my device. I was following a guide on youtube but XDA won't let me post it. I got to where I run odin while my phone is in download mode. Everything goes according to the video, however, when the phone reboots it freezes at the Samsung splash screen with the yellow ! at the bottom. I've tried putting the phone back in download mode and running it through Odin again but the problem is not fixed. Does anyone know how I would go about fixing this?
Try restocking. If you repartitioned you may be in trouble. Go to cm7 website and follow their instructions.
Sent from my GT-P1000 using XDA App
I made sure the repartition option wasn't selected before I ran odin in both cases. I'm assuming by CM7 you mean cyanogenmod? Sorry for the ignorance, I just want to make sure I'm doing what I need to to get it back in working condition
Dont know why should you go to cm7 website.
Follow this: http://forum.xda-developers.com/showthread.php?t=1103399
use an appropriate kernel for your phone.
Or get a stock kernel and use odin to flash: http://forum.xda-developers.com/showthread.php?t=1075278
Still not working? Use this: http://forum.xda-developers.com/showthread.php?t=1108499
For Galaxy S 2 GT I9100
Totalrapture said:
I made sure the repartition option wasn't selected before I ran odin in both cases. I'm assuming by CM7 you mean cyanogenmod? Sorry for the ignorance, I just want to make sure I'm doing what I need to to get it back in working condition
Click to expand...
Click to collapse
I've got no idea what boxhead72 is going on about, but anyway, to be able to help you, we need to know what you've done. Generally, you need to make sure you're flashing a correct ROM/kernel/modem for your device. You also might need to reset to factory settings. But without knowing what you've done, it's impossible to say.
You can find stock ROMs and a guide for I9100 (if that is your phone's model) in Intratech's thread here: [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download.
On the plus side, if you can get to the boot screen, you are far better off than those who get NOTHING. I know it doesn't make you feel that good right now, but if you can get this far, your chances of recovery (if you follow instructions) are near 100%.
If you told us that you get no response at all from the phone when the power button was pressed, you might have room to worry a bit.
Now, not so much. Just take a minute to breathe and read through your steps as outlined in the above mentioned threads. You'll be fine in all likelihood.
Okay, I did some more searching and realized I was on the completely wrong forum... I have the AT&T U.S. I777 Galaxy S2. So exactly what I did was install kies, close out of it, put my phone into download mode, connect it to my computer, install what I assume was an incorrect .tar file using Odin while it was in download mode, let it reboot and am now seeing it hang at the boots screen with the yellow exclamation mark. I wouldn't mind reformatting it if someone could show me how, but I mainly want to use this guide:
http://forum.xda-developers.com/showthread.php?t=1285894
to root it and install CM7. Could I just run odin again and install the .tar file given in these instructions? Or does it not quite work like that? Thanks for all the help you guys are giving by the way!
Totalrapture said:
Okay, I did some more searching and realized I was on the completely wrong forum... I have the AT&T U.S. I777 Galaxy S2. So exactly what I did was install kies, close out of it, put my phone into download mode, connect it to my computer, install what I assume was an incorrect .tar file using Odin while it was in download mode, let it reboot and am now seeing it hang at the boots screen with the yellow exclamation mark. I wouldn't mind reformatting it if someone could show me how, but I mainly want to use this guide:
http://forum.xda-developers.com/showthread.php?t=1285894
to root it and install CM7. Could I just run odin again and install the .tar file given in these instructions? Or does it not quite work like that? Thanks for all the help you guys are giving by the way!
Click to expand...
Click to collapse
I don't know anything about that phone, but a quick look in those forums shows:
[Heimdall][Odin][Stock][Root]UCKH7 Return/Unbrick to Stock (or Root)
and
[ROM] CyanogenMod 7 for the Samsung Galaxy S II (AT&T) :: V7.1.0 RC1 (9 Oct 2011)
Thanks for those, I was actually reading through them when I noticed you posted them. I have another problem now though, I ran the stock rom through odin in this guide:
http://forum.xda-developers.com/showthread.php?t=1286432
but it failed in Odin and upon reboot it says firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I didn't know kies had a recovery mode, but when I connect my phone it always fails to connect. Note that I CAN still get into the download menu, but that's it. At this point is there anything else I can do?
Totalrapture said:
it failed in Odin and upon reboot it says firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I didn't know kies had a recovery mode
Click to expand...
Click to collapse
I presume Kies recovery mode is in Kies -> Tools -> Emergency firmware recovery.
I noticed that as well but like I said I cannot connect to Kies so any recovery mode isn't very helpful
Totalrapture said:
At this point is there anything else I can do?
Click to expand...
Click to collapse
I guess if you've done everything on [Guide] How to Prepare Your Phone to Return to the Store or for Warranty Replacement (which is linked at the bottom of the thread I linked earlier), then your next port of call should be Recovering an ATT Galaxy S2 after flashing GT-I9100 Firmware.
i have tried different methods to fix this
first thing i did was use odin to put a stock rom on my phone that didn't work with and without pit
then i tried using odin with another stock rom where you had to use bootloader, pda, phone and csc instead of just pda, when i tried this it just stays on datafs and does not move with and without pit
the other thing i tryed was going into recovery mode and putting CF-root and installing CM9 via zip all that did was make the phone stay on the CM9 splash screen
is there something i have missed?
You probably have damaged /data partition.
Have a look at this thread, it may be helpful in your situation.
fxrb said:
Have a look at this thread, it may be helpful in your situation.
Click to expand...
Click to collapse
i have tried that this is where it gets stuck on data
how can i fix the data\ partition
can anyone help please
What model phone do you have? It is printed on the label under your battery.
And what did you try to flash, EXACTLY? (links would be helpful)
Usually getting stuck like this means you were flashing something not meant for your phone.
EDIT: also, there are instructions for installing CM9 on this thread which are supposedly "noob proof". Were these the instructions you followed?
ctomgee said:
What model phone do you have? It is printed on the label under your battery.
And what did you try to flash, EXACTLY? (links would be helpful)
Usually getting stuck like this means you were flashing something not meant for your phone.
EDIT: also, there are instructions for installing CM9 on this thread which are supposedly "noob proof". Were these the instructions you followed?
Click to expand...
Click to collapse
model: GT-I9100
I9100XWLPT_I9100XXLQ6_I9100XEULPA_XEU this one
VillainROM-SGS2-v1.0.tar.md5 this one
and this one I9100XXLPH
yeah i have upgraded CM loads of times with no problems when ever a new nightly comes out i upgrade if the reviews are good
liammozz said:
i have tried different methods to fix this
first thing i did was use odin to put a stock rom on my phone that didn't work with and without pit
then i tried using odin with another stock rom where you had to use bootloader, pda, phone and csc instead of just pda, when i tried this it just stays on datafs and does not move with and without pit
the other thing i tryed was going into recovery mode and putting CF-root and installing CM9 via zip all that did was make the phone stay on the CM9 splash screen
is there something i have missed?
Click to expand...
Click to collapse
Please provide these info:
-Your phone model no
-Your old ROM details
-the detail of the firmware you were trying to flash via Odin.
Swyped from my Samsung Galaxy SII
was that the information you needed?
Have you tried flashing a stock firmware and factory reset?
Sent from my brain using telekinesis
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)
Hey guys,
I've spent the better half of 8 hours looking on multiple forums/downloading roms/attempting to flash my cousin's GT-I9300.
I attempted KIES update and emergency maintenance and they both start freezing.
I attemped odin with a multitude of roms with the model & serial given by kies (PDA:LLB / PHONE: LLA / CSC: LL3)
I've even downloading android commander to no avail.
I've successfully rooted and flashed my i747 multiple times so i'm somewhat familiar with the odin flash process, but this is a bit unsual.. and frustrating lol.
The phone is in reboot cycle (loops after the samsung logo animation), won't let me access recovery but will let me get into odin recovery.
Odin seems to have failed at every stock rom flash...
ANY help?
Riktar said:
Hey guys,
I've spent the better half of 8 hours looking on multiple forums/downloading roms/attempting to flash my cousin's GT-I9300.
I attempted KIES update and emergency maintenance and they both start freezing.
I attemped odin with a multitude of roms with the model & serial given by kies (PDA:LLB / PHONE: LLA / CSC: LL3)
I've even downloading android commander to no avail.
I've successfully rooted and flashed my i747 multiple times so i'm somewhat familiar with the odin flash process, but this is a bit unsual.. and frustrating lol.
The phone is in reboot cycle (loops after the samsung logo animation), won't let me access recovery but will let me get into odin recovery.
Odin seems to have failed at every stock rom flash...
ANY help?
Click to expand...
Click to collapse
I assume with odin recovery you mean download mode? If so try to flash a stock ROM (maybe first a version that is from your region, you can find them on sammobile.com) via Odin and make sure that KIES is turned off (also from task manager, even better uninstall it). Do you have any error message showing up when you try to flash with Odin?
Try the flash again, and if it loops, try booting recovery and doing a reset......yes,I know you said you can't get into recovery, but just try after the flash
Also remember it can take a few minutes to boot after a flash, so be patient and give it a chance
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
Also what does the Odin log say/what stage is it failing at?
chrismast said:
I assume with odin recovery you mean download mode? If so try to flash a stock ROM (maybe first a version that is from your region, you can find them on sammobile.com) via Odin and make sure that KIES is turned off (also from task manager, even better uninstall it). Do you have any error message showing up when you try to flash with Odin?
Click to expand...
Click to collapse
slaphead20 said:
Try the flash again, and if it loops, try booting recovery and doing a reset......yes,I know you said you can't get into recovery, but just try after the flash
Also remember it can take a few minutes to boot after a flash, so be patient and give it a chance
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
Also what does the Odin log say/what stage is it failing at?
Click to expand...
Click to collapse
I've attempted to flash maybe 7-8 different roms. My cousin won the gt i9300 at a raffle overseas so thats why im unsure of what exact country it is. Is there a definitive way of finding which country exactly? I do know it was an unbranded rom and fully unlocked because he's been using it here (w/ straighttalk) for the past 6 months or so just fine i even flashed jellybean 4.1.1 when it was first released (via kies).
When I try to and get the version from kies it tells me (PDA:LLB / PHONE: LLA / CSC: LL3) but no country.. so idk if there's a definite way of finding this out. I'm downloading ICS rom and gonna try and roll back the rom as i've read some people did that and it worked.
Once i bring up download mode it says on the top (ODIN MODE) and binary download count YES (1 count) and rom as custom. I attempt to flash Odin it always fails right after system.img. never gets past i've tried to do multiple attempts(5-6) per rom but no luck yet. never gets past "downloading... do not turn off) phase.
thanks alot for the assistance guys!
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
JJEgan said:
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
Click to expand...
Click to collapse
Model Number under battery says GT-I9300 same thing that's prompted during kies for emergency recovery.. which downloads but ends up not recognizing it. Odin flash on the other hand recongizes it when i plug it but keeps failing.
LL3 is from Pakistan http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=PAK#firmware
Try downloading any unbranded firmware cause it's pretty much it's the same thing. You can always change the csc after you flash your phone.
or Download the right firmware on the country on which you are right now.
Then follow the youtube guide here on how to properly flash it: http://forum.xda-developers.com/showthread.php?t=1646610. You can just skip the unrooting part i guess.
EDIT:
Annandale is in UK right? On the 2nd link that i gave you the first firmware there is from UK so i think you can flash that one.
JJEgan said:
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
Click to expand...
Click to collapse
SignetSphere said:
LL3 is from Pakistan http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=PAK#firmware
Try downloading any unbranded firmware cause it's pretty much it's the same thing. You can always change the csc after you flash your phone.
or Download the right firmware on the country on which you are right now.
Then follow the youtube guide here on how to properly flash it: http://forum.xda-developers.com/showthread.php?t=1646610. You can just skip the unrooting part i guess.
Click to expand...
Click to collapse
Yea i though it was from pain (LL3 rom listed on another thread) but i then foudn the PAK version so that's the one i downloaded but the 4.1.2 version. I downloaded 4.1.1 and 4.0 (ics) version so i'll give those a try too.
Phone specs as they appear on the back are :
Model: GT-I9300
FCC ID: A3LGTI9300A
SSN: -I9300GSMH
S/N: RF1C63KJ4RL
Okay goodluck on flashing your S3 I'm gonna sleep now lol. 12:11am here.
Gnite, gonna keep messing with this and see what happens.
Edit: Annandale. Virginia USA sry for the confusion.
Just tried the ICS and the 4.1.1 rom still fails at systems.img ... any ideas what else it could be?
Riktar said:
Just tried the ICS and the 4.1.1 rom still fails at systems.img ... any ideas what else it could be?
Click to expand...
Click to collapse
see this: http://checkrom.com/threads/nand-write-start-stuck-in-odin.920/ I hope that can help you.
thanks for the info! that first problem stated on there looks the exact problem i'm having, I'll try it asap and check back in with an updated.
Riktar said:
thanks for the info! that first problem stated on there looks the exact problem i'm having, I'll try it asap and check back in with an updated.
Click to expand...
Click to collapse
the pit files that was posted there was for the 64gb one if you are using the 16gb one so I've uploaded the pit files for all SIII storage models.
just take note of this:
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
And make sure to follow the the instructions there. Likewise credits goes to the posters there and not me lol.
SignetSphere said:
see this: http://checkrom.com/threads/nand-write-start-stuck-in-odin.920/ I hope that can help you.
Click to expand...
Click to collapse
SignetSphere said:
the pit files that was posted there was for the 64gb one if you are using the 16gb one so I've uploaded the pit files for all SIII storage models.
just take note of this:
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
And make sure to follow the the instructions there. Likewise credits goes to the posters there and not me lol.
Click to expand...
Click to collapse
Thanks for the follow up and thorough info! i'll make a note of that when i do this later.
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Riktar said:
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Click to expand...
Click to collapse
Get perkas file stash from Play store, I'm sure it has stock kernel
Edit....just checked, plenty of stock kernels to choose from
Andi has some handful of kernels here http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/18 I just don't know if he has the kernel you are looking for.
thanks for links guys! i'll look up one i need and download it and check back in later.
Riktar said:
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Click to expand...
Click to collapse
I had a similar problem, my phone just froze in the middle of a phone call, had to pull out battery, and when i tried to turn it on, it wouldn't pass the second "SAMSUNG" logo, just stayed there forever, with the blue light (Official JB 4.1.2 - not rooted)... Anyway, after 3 days of trying, downloaded bunch of firmwares, but all of them gave me the infamous "Complete(Write) operation failed". This is how I MANAGED to revive my i9300 16Gb Int:
1.Open ODIN, load ONLY the pit file corresponding to your phone (In my case i9300 16Gb Int'l - GT-I9300_mx_20120220.pit), check "Repartition" and "F.Reset Time" and hit "Start".
- If this step goes OK (All threads completed. (succeed 1 / failed 0))
2. Click on the "Reset" button in Odin (or close and re-open it), in PDA select "recovery-cwm-touch-6.0.1.2-i9300.tar", make sure only "F.Reset Time" and "Auto Reboot" are checked, and flash it. If everything goes OK, you should now have CWM instead of Stock recovery.
3. Take any microSD card, any size, and put THIS file on the root of the microSD using a card reader or whatever you prefer - but be careful, copy the zip as it is - do not unzip it.
4. Insert the memory card in the phone, enter recovery*, and select "Install zip from External Storage" and choose the file you put on the root of the card (by the way, it's a 4.0.4 downgrade bootloader), it should flash in a second, the phone will restart, and that's it!
5. Download and flash 4.0.4 Stock FW using Odin (i used "I9300XXBLH1_OXEBLF1.zip"), everything should go OK, and the phone will be bootable again.
*(my phone didn't wanted to enter recovery the old fashioned way using 3-button combo, but i managed to enter recovery from charging mode, by connecting the charger on a switched off phone, and as soon it starts charging press Vol Up + Home + Power, and when the FIRST Logo (Galaxy S III GT-I9300) appears, let go of the power button, keep pressing the Vol Up + Home, and it enters recovery).
Am I hard bricked?
I accidently tried flashing the wrong rom onto my phone.
Now it says to use samsung emergency recovery, which doesnt work.
I lost the paper that had all the info about my phone on it..
Ive tried using ODIN to flash multiple different stock roms for the g925a and it always says FAIL.
Ive tried not flashing the boot loader.
Ive tried using the appropriate PIT
Tried different cables and usb ports as well.
edit: the phone was encrypted and had the reactivation lock on as well
Thanks for any replies
Hello,
Where can you boot ? Normal - Download - Recovery
Which PIT file have you flashed to your device ?
What was the ROM you flashed on your device ?
Where does Odin fails while flashing ?
iDroid27210 said:
Hello,
Where can you boot ? Normal - Download - Recovery
Which PIT file have you flashed to your device ?
What was the ROM you flashed on your device ?
Where does Odin fails while flashing ?
Click to expand...
Click to collapse
ODIN mode only
ZEROLTE_USA_ATT - Tried with, and without
OE2, OF3, OCE, OJ9,BOI2 stock i have tried them all to no avail
Sadly I dont know what ROM was originally on the phone, I lost that paper with the info..
Odin will fail at different files, like sboot and others. Ive tried flashing with BL and without.
Thank you
c19o said:
ODIN mode only
ZEROLTE_USA_ATT - Tried with, and without
OE2, OF3, OCE, OJ9,BOI2 stock i have tried them all to no avail
Sadly I dont know what ROM was originally on the phone, I lost that paper with the info..
Odin will fail at different files, like sboot and others. Ive tried flashing with BL and without.
Thank you
Click to expand...
Click to collapse
Oh, you have got the phone like that?
Mm... Use SamFirm to download a full-wipe firmware (binary nature ticked).
Flash firmware with your PIT with Repart and Nand Erase All ticked in Odin
iDroid27210 said:
Oh, you have got the phone like that?
Mm... Use SamFirm to download a full-wipe firmware (binary nature ticked).
Flash firmware with your PIT with Repart and Nand Erase All ticked in Odin
Click to expand...
Click to collapse
I tried flashing all of those stock firmwares above after it bricked and none seem to work.
Your program says "could not fetch info"
Im guessing I just havent got the right firmware to flash and I dont know what to use because I lost that paper with all the phones info.
What's your model and country ?
Have you put infos about device on SamFirm ?
iDroid27210 said:
What's your model and country ?
Have you put infos about device on SamFirm ?
Click to expand...
Click to collapse
SM-G925A bought in the US from the carrier "ATT".
Yes I tried SamFirm, it doesnt work for me. Unless I got the country code wrong.
Oh... If you have the AT&T version there's only the AT&T version.
Put "ATT" for the region.
iDroid27210 said:
Oh... If you have the AT&T version there's only the AT&T version.
Put "ATT" for the region.
Click to expand...
Click to collapse
I am using SM-G925A and ATT.
Could not fetch info
Bump
You can boot into download mode on the phone?
Holding the volume down and power button at the same time? If so..
Use kies air, it will say that the phone is unsupported but still navigate to emergency firmware upgrade and put in the device model and S/N number located on the back of the phone or on the box, hope this works for you
Jigsaw350 said:
You can boot into download mode on the phone?
Holding the volume down and power button at the same time? If so..
Use kies air, it will say that the phone is unsupported but still navigate to emergency firmware upgrade and put in the device model and S/N number located on the back of the phone or on the box, hope this works for you
Click to expand...
Click to collapse
I appreciate the help, but Ive tried that, and Smart Switch too. Just gives me an error after entering the serial number.