Related
Hi.. please know that a) I am a complete beginner at all things 'Forums' and programming mobile 'phones and b) hand on heart I have searched everywhere as your video states and 5 hours later I am still stuck... sooooo:
I have a Samsung Galaxy S2 XWKI8 which I got through 3. I am trying to root my phone BUT in order to start I need to re-boot in download mode - problem... my phone will not respond to the three button press action and just happily starts up as normal. Any ideas? I did, just once earlier to day get a screen with yellow and green writing but no yellow triangle. I went to reload but my eventual odin message said succeed 0/failed 0 and my phone didn't re-boot either. My main problem is that I just can't get my phone to re-boot. Can you help?
Try the three button combo again, but hold volume down and power at the same time then press the menu button, as soon as you see the Samsung splash screen, let go of all three. Works for me. If not then you could always buy a USB Jig from ebay.
Hope this helps.
Edit: To get a reboot, try removing the battery, then power up as normal.
Thank you so much for responding. I'll give it a go and let you know - THANK YOU
No... sadly it's not working - weird. I seem to get the Samsung Galaxy version screen come up twice and then the '3' logo and then a rainbow 'S' - it all takes a bit of a while! Would paying for an unlock service be a better idea?? OR... what is a JIG and what does one do with it...!
Strange...you should be able to get into download mode?
Does your phone boot up so that you can use the phone or are you stuck at the bootscreen (rainbow S).
You should not need to pay to get your phone unlocked there are plenty of resources and help on here to unlock it.
The USB jig boots your phone into download mode and resets the ROM flash counter so that if you have to return your phone to Sammy, they won't know you have flashed a custom ROM.
Try searching for other threads regarding 'not being able to get into download mode', you may find someone else has had the same problem.
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
zoot1 said:
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I already did that....still stuck in safe boot.
alphaola said:
I already did that....still stuck in safe boot.
Click to expand...
Click to collapse
I think its:
Switch off your phone..
Press the back or cancel(left) button..
Once you see the logo screen press and hold the left capacitive button..
Hey,
I'm having the exact same issue with my note 2. Wondering if you found a solution.
Anybody can help with this? I am having the same issue
use search, asked and answered too many times
I did search..
I tried everything.
full wipe, cache, dalvik, factory reset and it keeps saying safe mode.
so please help
EDIT:
i just installed slim rom, and it keeps saying safe mode...
s3 safe mode
one way work for me..
1-turn off the phone
2- remove battery
3- short + and - in battery connector for few minute
4-insert battery and turn it on
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
It's Volume button work fine??
The problem has nothing to do with reboot. As you can see have already mentioned reboot as part of the solutions I tried.
My device is fine with ICS firmwares but has issues with Jellybean (stock and modded rom including CM10.1). Currently am running ICS on it as thats the only way the phone works properly.
I installed 4.0.4 (XAALF2) via Odin, but it got stuck on samsung logo. Then turned it off and flashed CWM to do factory reset as the volume key doesnt work on stock recovery. After that everything worked fine. I was able to update to the latest 4.0.4 via OTA.
The problem is hardware, so you might want to contact Samsung.
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Ic3y83 said:
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Click to expand...
Click to collapse
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
alphaola said:
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
Click to expand...
Click to collapse
I'am sorry for misunderstanding u. I think you could be right. Maybe it is a hardware issue.
Don't forget to "unroot" and reset the "flash counters".
Greetz.
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
i did a reboot and it removed the safe mode :good:
My personal experience, i overclocked my SGS3 with Boeffla kernel on ARHD then i got freeze screen and phone reebot into safe mode, I entered into recovery and reebot then everithing was fine again.
Safe mode occurs when something in the phone is not working properly , could be hardware or software, however, stuck on it is not a good signal.
my advice is to send the device to service.
Do not forget to reset flash counter via Triangle Away and flash stock factory firmware.
Good Luck! :good:
note 3 stuck in save mode window
This problem occurs after changing to a new simcard not already installed before in the device.
1. Power off the galaxy note 3.
2. Remove the micro simcard from the slot by sliding.
3. Power on the device without the simcard.
4. It will run in a normal mode, if so, this will actually diagnosed that there is a simcard defined by the administrator as default. In the security setting in setting menu and for protection against theft, the original simcard must be insert to unlock this choice of detection of any change in new simcard. New simcard is defined as strange and theft suspected.
I hope this make you reach some solution for your trouble.
S3 SAFE MODE issue
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
shoeb_v said:
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
Click to expand...
Click to collapse
Same issue here, it is hardware
I went through a lot of threads and not one had a solution. So I will post here what worked for me.
Customer came to my store with Galaxy S3 (SPH-L710T) that was stuck in safe mode. I tried everything on this thread, nothing worked. Luckily I had a older Galaxy S3 (SPH-L710) with a broken screen, so I switched over the motherboard from the customer's phone to the old one - I did connect the customer's original LCD to the motherboard since my old phone had its LCD broken. Powered it on, no safe mode.
So at this point I just transferred the volume buttons flex cable to the customer's phone. Powered it on, no safe mode again.
Hope it helps someone!
It's still very early an I see a few people going stir crazy over finding a way to root their phones. I for one am not sure I want to root just yet, the reason being Samsung pay. If it's going to be as awesome as they say it will be I don't wanna miss out due to tripping Knox.
Now I do love flashing and all things root related but I'm willing to hold out.
What about you? Root or no root? Why?
I root right away even if I don't have a "good" reason too. Its the because I can. I don't really care about the tripping knox thing I guess because if you have insurance there is always a chance the device could get "broken". Then you don't have to worry about if its tripped or not. Thats the position Samsung has put me in I wouldn't typically do something like that. So ya now I'm just waiting for TWRP then I will try and make a ROM.
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
I don't care about warranty just samsung pay. I heard it was harder to make roms with exinos is that true?
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
That sucks bro. I feel your pain. What happens if you press volume down, power and home for like 30 seconds?
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Not sure what device you have but there was a video that said not to use the edge version of the root, and to use the regular S6 version. Running the S6 version will fix your broken device. Take this with a grain of salt, I'm just telling you what I saw. I will post the video link if I get a chance.
PS not sure if this actually helps you or not..
Rooting broke Google Play Movies on my phone, battery life was miserable and phone never went to sleep. After I unrooted everything went back to normal. So I am not going to root and just wait until things are cleaned up.
Every phone I've ever had has been rooted as soon as I got it. Not this time though, because of Samsung Pay.
If rooting breaks Samsung Pay, I'll never root the phone
IakobosJ said:
Every phone I've ever had has been rooted as soon as I got it. Not this time though, because of Samsung Pay.
If rooting breaks Samsung Pay, I'll never root the phone
Click to expand...
Click to collapse
You and me both!
mrnovanova said:
That sucks bro. I feel your pain. What happens if you press volume down, power and home for like 30 seconds?
Click to expand...
Click to collapse
Volume down and power for 7 seconds = battery pull
alexkaye said:
Volume down and power for 7 seconds = battery pull
Click to expand...
Click to collapse
not for me right now: i have the turquoise error screen telling me to use smart switch. volDown + power for 7 seconds turns the screen off... and then right back on a couple seconds later. and i can't seem to slip in the recovery key sequence during that gap.
volDown + power + home is a diff story: that brings me into download mode. but i don't have anything that works in odin right now without failing. very possible that i don't have the correct rom, or that the rom is fine but i just need to go into recovery mode to complete, but i can't seem to do that!
jasonastley said:
not for me right now: i have the turquoise error screen telling me to use smart switch. volDown + power for 7 seconds turns the screen off... and then right back on a couple seconds later. and i can't seem to slip in the recovery key sequence during that gap.
volDown + power + home is a diff story: that brings me into download mode. but i don't have anything that works in odin right now without failing. very possible that i don't have the correct rom, or that the rom is fine but i just need to go into recovery mode to complete, but i can't seem to do that!
Click to expand...
Click to collapse
How about volume up+power+home to stock recovery to perform a factory reset?
No root for me I'm afraid! If I root this device I lose my nfc payment app (Semble) as it checks for root and locks the app if it's detected. Besides I've rooted every other phone I've had since iPhone Gen 1 and I don't really have the time anymore now I've got a 1 year old boy!
Sent from the Edge.
mrnovanova said:
How about volume up+power+home to stock recovery to perform a factory reset?
Click to expand...
Click to collapse
nope. that's what i meant by "the recovery key combination" that i mentioned. only the dload mode key combo works, volUP + power + home does nothing.
jasonastley said:
nope. that's what i meant by "the recovery key combination" that i mentioned. only the dload mode key combo works, volUP + power + home does nothing.
Click to expand...
Click to collapse
Oh shoot. Sorry to hear that.
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Why is ODIN failing? Drivers installed? Where did you get this recovery? If ODIN can see your device you flash back to unrooted stock firmware.
Also, someone mentioned that you can Vol down + power will shut the device down. As soon as the screen goes black take your finger off the power button, press and hold Vol up + home then press power. You can go right from download mode to recovery with just the buttons.
great questions:
jamcar said:
Why is ODIN failing? Drivers installed? Where did you get this recovery? If ODIN can see your device you flash back to unrooted stock firmware.
Click to expand...
Click to collapse
1. i got them from mobile.com/firmwares/database/SM-G925F/
I would love to hear if this is a good source. also, I don't know if it matters exactly which of those firmwares to choose (there are many, you choose country and carrier)-- i don't know which one came with this phone as it was sent as a demo to me and i didn't take a screen shot of the info screen (does it matter?)
Also, someone mentioned that you can Vol down + power will shut the device down. As soon as the screen goes black take your finger off the power button, press and hold Vol up + home then press power. You can go right from download mode to recovery with just the buttons.
Click to expand...
Click to collapse
2. that doesn't work for me, tried 15 times. I'm stuck with this turquoise error screen telling me to use emergency recovery in smart switch. i can easily get over to dload mode too. From either place, volDown + power gets the black screen and then immediately goes right back to the turquoise error screen, ignores anything else i seem to press, can't get into recovery.
No root for me either. It's hard lol. I miss it mostly for the adblocker. But I'm too worried that rooting with make it so I wouldn't be able to use Samsung pay when it comes out! If a root method is released that won't trip the KNOX sensor then heck ya, I'll root right away!
jasonastley said:
great questions:
1. i got them from mobile.com/firmwares/database/SM-G925F/
I would love to hear if this is a good source. also, I don't know if it matters exactly which of those firmwares to choose (there are many, you choose country and carrier)-- i don't know which one came with this phone as it was sent as a demo to me and i didn't take a screen shot of the info screen (does it matter?)
2. that doesn't work for me, tried 15 times. I'm stuck with this turquoise error screen telling me to use emergency recovery in smart switch. i can easily get over to dload mode too. From either place, volDown + power gets the black screen and then immediately goes right back to the turquoise error screen, ignores anything else i seem to press, can't get into recovery.
Click to expand...
Click to collapse
Did you ever fix this? I'm having the same issue, but because I flashed TWRP...
I need to use Smart Switch, but that says my device is unsupported... SM-G925F
EDIT: Re-flashed root, and all good again!
Tripledrop said:
Did you ever fix this? I'm having the same issue, but because I flashed TWRP...
I need to use Smart Switch, but that says my device is unsupported... SM-G925F
EDIT: Re-flashed root, and all good again!
Click to expand...
Click to collapse
yep, i think that was a key step for me too: re-flashed the root thing, after trying to re-flash stock a bunch of times.
Hii Friends,
Im using samsung mega 6.3. (GT-I9200)
im trying to update my mobile via odin. but when i try to enter download mode its not entering .
Please help me
(Volume down + home button+power button )
Dag_Nab.It
S/G MEGA 6.3 (AT&T-US) SGH-i527~GT-i9205
I have the same issue with my device not entering Download Mode. My device will ONLY go to main screen asking for password, which I no longer remember.
please help us
Still_Kicking...
VolumeUP+Home+Power, still getting 'no response' while holding all three down and releasing at start up.
*i forgot to mention that after StartUp, on the Enter Password request page, only the Power button operates. the VolumeUp, VolumeDown, and Home buttons do nothing. I have to press Power button after the screen has blacked out to bring-up the Enter Password request page again.
Today, I installed an old SIM card (SIM not provisioned MM#2) is displayed. I'll have to research this for the meaning as this is a first for me.
This time I held VolumeDown+Home buttons throughout the StartUp process. This time, on the Enter Password request page, in the lower left corner, Safe mode is stated. Anyone have some tips on what we can do while the device is in this mode as I have yet to read anything on Safe mode for any of the devices listed so far?
TO ENTER Safe mode:
Hold Power button until device starts up, release. Now hold down VolumeDown+Home buttons until Enter Password request page shows. The device should now state that its in Safe mode in the lower left corner. Please take note that this is on the S/G MEGA 6.3 (AT&T-US) SGH-i527~GT-i9205.
Galaxy Mega 6.3/ Black screen after ROM Flash
A friend of mine gave me his Galaxy Mega 6.3 as when he previously did something with the phones software, he messed something up and lost imei numbers, wifi and bluetooth wouldn't work however the phone would still turn on. Just like an MP3 player.
I struggle around a day to get this phone into download mode in order to flash its factory rom and i finally got the phone to download mode, i flashed the correct I9205 stock rom on and now the phone wont turn on.
No buttons light up including the blue LED at the top. The screen turns on and back off after a few seconds. No logo appears, but the phone does respond to the power button. Its like a bootloop but it loops before it gets to any sort of logo screen. I cant seem to launch to any sort of safe mode, recovery mode or download mode and the phone is not detected on my computer.
Any ideas on how to get this backup and running.
0Waiser0 said:
A friend of mine gave me his Galaxy Mega 6.3 as when he previously did something with the phones software, he messed something up and lost imei numbers, wifi and bluetooth wouldn't work however the phone would still turn on. Just like an MP3 player.
I struggle around a day to get this phone into download mode in order to flash its factory rom and i finally got the phone to download mode, i flashed the correct I9205 stock rom on and now the phone wont turn on.
No buttons light up including the blue LED at the top. The screen turns on and back off after a few seconds. No logo appears, but the phone does respond to the power button. Its like a bootloop but it loops before it gets to any sort of logo screen. I cant seem to launch to any sort of safe mode, recovery mode or download mode and the phone is not detected on my computer.
Any ideas on how to get this backup and running.
Click to expand...
Click to collapse
Did you check the PDA, CSC, and of course the md5 to make sure you had the right Firmware(ROM)? Where did you download it from?
How did you get the device into download mode?
kidcrazie said:
Did you check the PDA, CSC, and of course the md5 to make sure you had the right Firmware(ROM)? Where did you download it from?
How did you get the device into download mode?
Click to expand...
Click to collapse
I managed to get the device to download mode via the normal method of pressing volume home and power however it doesnt always work and it just restarts continuesly. I got the rom from sammobiles or something like that and i believe its the correct one. I have tried several other roms that is for mega 6.3 but no hope. However i did manage to get twrp installed. Do you by any chance know any os that you can link for me that i can install directly and only by using twrp installation?
0Waiser0 said:
I managed to get the device to download mode via the normal method of pressing volume home and power however it doesnt always work and it just restarts continuesly. I got the rom from sammobiles or something like that and i believe its the correct one. I have tried several other roms that is for mega 6.3 but no hope. However i did manage to get twrp installed. Do you by any chance know any os that you can link for me that i can install directly and only by using twrp installation?
Click to expand...
Click to collapse
There is LineageOS ROM with RR Remix. I have heard that you have to use Kies before you can use Odin3. Sorry for the late reply.
kidcrazie said:
There is LineageOS ROM with RR Remix. I have heard that you have to use Kies before you can use Odin3. Sorry for the late reply.
Click to expand...
Click to collapse
What if kies does not detect device.
0Waiser0 said:
What if kies does not detect device.
Click to expand...
Click to collapse
I understand the problem we are having but I haven't quite figured out a solution just yet. Even my PC isn't recognizing my device now. Don't know WTH!!!!
Hi
yesterday my tab s6 screen got unresponsible without anything else happened..
Then i found out that if i used the pen - the n i could turn it off from drop down menu.
I did that but then when i tried to turn it on it got stuck on that bootloop!
I can not access recovery mode - only download mode.
When i put it on charge it starts booting without showing battery percent and boots over and over until battery is drained.
In download mode i tried to flash Bootloader and firmware - but no luck ( odin proceduce succeded but the tab is still in the same bootloop )..
Still can't reach recovery menu..
Any ideas?
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
bartleby999 said:
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
Click to expand...
Click to collapse
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
egidsatr said:
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
Click to expand...
Click to collapse
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
bartleby999 said:
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
Click to expand...
Click to collapse
I opened NBA 2K Mobile and then i went away for like 20mins..
Then i opened the tab and screen was not reacting - only with pen.
I think the USB debugging is not enabled - is there any ways how to enable it without rooting?
Just tried to install a firmware through download mode - Odin shows "passed" and my tab is still in the same sh** ..:/
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
JayR0503 said:
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
Click to expand...
Click to collapse
What country are you located in?
iBowToAndroid said:
What country are you located in?
Click to expand...
Click to collapse
UAE..
"setup connection failed" is a USB error. Try a different cable, or a different port on the computer, or a totally different computer