[Q] Cool ICS V2 Questions - HTC EVO 3D

I have a gsm evo 3d, unlocked and rooted, s-on
I have managed to make ICS Nonsense rom work on the phone, but whenever i try to flash the COOL ICS V2 rom it gets stuck in bootloop.
The process i use is
- In CWM wipe data, cache and dalvik
- install the rom(COOL ICS V2)
- poweroff and reboot into fastboot
- in cmd i use-> fastboot flash boot boot.img (for the boot.img that comes in the rom)
-Then reboot the phone
After this it is stuck in bootloop, does anyone know the Fix? or did i do it wrong as the same process worked for the nonsense rom.

I think its time for you my friend to S-off your phone in order to be full supported-able to run roms/kernels/addons with no problems you better S-OFF it

sgaheer said:
I have a gsm evo 3d, unlocked and rooted, s-on
I have managed to make ICS Nonsense rom work on the phone, but whenever i try to flash the COOL ICS V2 rom it gets stuck in bootloop.
The process i use is
- In CWM wipe data, cache and dalvik
- install the rom(COOL ICS V2)
- poweroff and reboot into fastboot
- in cmd i use-> fastboot flash boot boot.img (for the boot.img that comes in the rom)
-Then reboot the phone
After this it is stuck in bootloop, does anyone know the Fix? or did i do it wrong as the same process worked for the nonsense rom.
Click to expand...
Click to collapse
try flashing the rom with 4EXT recovery, or with Flash Image GUI. With these recovery programmes you have more chance to succeed and you can even flash kernels with them.
Good luck.

The rom does not ask for s-off, and i am still trying to s-off at the moment will try the 4ext and other process

sgaheer said:
I have a gsm evo 3d
After this it is stuck in bootloop, does anyone know the Fix? or did i do it wrong as the same process worked for the nonsense rom.
Click to expand...
Click to collapse
I see cool ice v2 in the CDMA dev forum too. It's a long shot, but make sure you have the GSM version since flashing the wrong one can cause bootloops.
Sent from my PG86100

It is the GSM version, anyone else manage to get rom working with s-on?

sgaheer said:
It is the GSM version, anyone else manage to get rom working with s-on?
Click to expand...
Click to collapse
I don't know how it is on the GSM side, but I know that the ICS ROMs cause bootloops for people who are S-On. It does not happen to everyone, but it seems that almost everyone who has bootloops is s-on. If you can get s-off (again, I don't know much about GSM), you may have better luck.

Related

ICS ROMs Give Me Bootloops!

I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-ON HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
EDIT:SORRY MENT S-ON
Waffle97slayer said:
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-OFF HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
Click to expand...
Click to collapse
Hm. Maybe just try manually wiping everything from recovery instead? I never use superwipes and as long as I factory data reset x2, wipe cache/dalvik x2, I never have issues. That's just how I've done it on all my phones and I never have issues.
I just flashed Newts One S RC3. It took me a while but I finally found a method that worked. I did it once and got through set-up and was in play store downloading apps when it went into boot loop. I tried the same method again and it didn't work. I messed around with different methods for a while before getting the following to work.
What I'm using:
HTC Unlock method
Hboot 1.5
S-on
cwm recovery 4.0.1.4
I used a computer to fastboot to recovery. Did factory data reset, wipe dalvik, and cache all x2. I installed the .zip rom file from SD card. And then installed the .zip anthrax ics RLS5 kernel file from SD card. Then I rebooted and so far everything is working fine. I've been running it for a couple hours now. I manually downloaded my apps one by one from the play store for fear of repeating what happened to me the first time. And I've just finished signing in to everything I use and haven't had an issue yet.
I hope this helps.
Sent from my PG86100 using XDA
AmbrosiaLyn07 said:
I just flashed Newts One S RC3. It took me a while but I finally found a method that worked. I did it once and got through set-up and was in play store downloading apps when it went into boot loop. I tried the same method again and it didn't work. I messed around with different methods for a while before getting the following to work.
What I'm using:
HTC Unlock method
Hboot 1.5
S-on
cwm recovery 4.0.1.4
I used a computer to fastboot to recovery. Did factory data reset, wipe dalvik, and cache all x2. I installed the .zip rom file from SD card. And then installed the .zip anthrax ics RLS5 kernel file from SD card. Then I rebooted and so far everything is working fine. I've been running it for a couple hours now. I manually downloaded my apps one by one from the play store for fear of repeating what happened to me the first time. And I've just finished signing in to everything I use and haven't had an issue yet.
I hope this helps.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yes i herd about this but have you tried charging or connecting your phone to a computer, many people can't charge or connect to computer via USB because of this kernel
Idk before I sent my phone in a had been using that kernel. I had no trouble charging/connecting. But really what it comes down to is every one of these phones is different, then you throw in the hboot and other key factors and it just gets worse.
veladem said:
Idk before I sent my phone in a had been using that kernel. I had no trouble charging/connecting. But really what it comes down to is every one of these phones is different, then you throw in the hboot and other key factors and it just gets worse.
Click to expand...
Click to collapse
I just flashed the viperROM ics and the kernel, HMMMM it seems like i got to the main screen and no bootloops.... ,,, one tiny problem, NO 4G
and yes 4g works for this rom,, well atleast it says so
Waffle97slayer said:
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-OFF HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
Click to expand...
Click to collapse
Turn off smartflash if you are s-off you dont need it.
Then flash chads htc leak rls1 kernel, that stopped all the bootloops and problems for me its something about the stock kernel i am guessing. Everything worked fine after using that kernel. Anthrax rls5 says not to use it with sense 3.6, its right on androidfilehost. Chad said to use the leak rls1 instead for sense 3.6.
boot loop
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
kameljr11 said:
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
Click to expand...
Click to collapse
In my case I can't get any ROM based on the leaked RUU to boot unless I changed the kernel, this applies to both 3.6 and 4.0 ROMs. I don't know if you're GSM or CDMA but I know the kernel from Shooter_Ice works for me which is a GSM ROM. I can flash that over just about any ROM and it works or I can install the ROM straight up and it works to. If you're GSM, try that, if you're CDMA then look for a similar ROM that isn't based on the HTC leak.
kameljr11 said:
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
Click to expand...
Click to collapse
Flash chad.goodman's RSL1 ICS KERNEL ,, worked for me
Boot loops on ics
I am also getting the same thing i am unlocked via the htc method cdma on hboot 1.5 whenever i try flashing a ics rom no matter which one it is I keep getting a boot loop to the htc screen any suggestions?
JonathanJ52 said:
I am also getting the same thing i am unlocked via the htc method cdma on hboot 1.5 whenever i try flashing a ics rom no matter which one it is I keep getting a boot loop to the htc screen any suggestions?
Click to expand...
Click to collapse
ICS ROMs bootloop if you are Hboot 1.5 S-On (which you are if you unlocked via HTC). I recommend you get S-off using the wire trick or downgrade to 1.4 S-off. See the stickies in the CDMA Development section (or GSM development) to find information and steps on how to do it.
Waffle97slayer said:
Flash chad.goodman's RSL1 ICS KERNEL ,, worked for me
Click to expand...
Click to collapse
Where Can I Download This. Not A Link Since U Cant Link From Other Development Sites, Just A Direction.
NexusS4gFreak said:
Where Can I Download This. Not A Link Since U Cant Link From Other Development Sites, Just A Direction.
Click to expand...
Click to collapse
infectedROM is where Chad works out of.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
ICS ROMs bootloop if you are Hboot 1.5 S-On (which you are if you unlocked via HTC). I recommend you get S-off using the wire trick or downgrade to 1.4 S-off. See the stickies in the CDMA Development section (or GSM development) to find information and steps on how to do it.
Click to expand...
Click to collapse
+1, go s-off and you can flash anything you want
Loop FIX
Sometimes you will get boot loops even with 4ext.
One thing that I have found which works is flashing mean ROM 2.4 ICS as a base.
This ROM probably will not boot or will get stuck in a boot loop but that is fine in this case. From there on use 4ext to complete a "dirty install" of another ICS ROM. I recommend SOS De-Sensed Rom. Sometimes flashing a ICS ROM on top of another ICS ROM (booting or non booting) allows for install.
to bypass all the bs go straight to fastboot and flash 4ext recovery 1.00.5 and do the s off wiretrick and then try to flash the rom... when you get s off it releases more permissions for the kernel to flash to the rom without having to use flash image gui from joekrimz
try this
ok you need to flash the boot.img file trough the bootloader, if that doesnt work try flash image gui
Flash custom rom then pull out your battery, go to fastboot then try flash this boot.img with fastboot http://db.tt/kEUVhnvV
Sent from my HTC EVO 3D X515m using xda premium

HBOOT-1.5 S-On Meanrom 2.4 flashed. Constant Reboots

I heard that I may have to update the kernel on my EVO 3d with HBOOT-1.5 S-on. I have fully wiped my phone a couple of times and reinstalled with no success. Any insight would be greatly appreciated.
I had that issue with any ics rom. So I unlocked the bootloader with the juno method (s-off) and it stopped doing it
Sent from my HTC One X using xda premium
ryan.ellison said:
I heard that I may have to update the kernel on my EVO 3d with HBOOT-1.5 S-on. I have fully wiped my phone a couple of times and reinstalled with no success. Any insight would be greatly appreciated.
Click to expand...
Click to collapse
You have to flash the kernel for MeanRom ICS, since it can't use the stock GB kernel. I used Flash Image GUI(in the Play Store).
1) Open Flash Image GUI and go to your Mean Rom zip to flash the kernel.
2) Boot into recovery from Flash Image GUI.
3) Flash Mean Rom ICS and reboot.
Check out this video.
http://www.youtube.com/watch?v=nDFO6H1XObI
There are other ways of course like going to S-off, but since you are S-on, this should work.
aypanthony said:
You have to flash the kernel for MeanRom ICS, since it can't use the stock GB kernel. I used Flash Image GUI(in the Play Store).
1) Open Flash Image GUI and go to your Mean Rom zip to flash the kernel.
2) Boot into recovery from Flash Image GUI.
3) Flash Mean Rom ICS and reboot.
There are other ways of course like going to S-off, but since you are S-on, this should work.
Click to expand...
Click to collapse
I tried that and I'm still facing boot loop. Thanks very much for your help
Did you try fastboot flashing the boot.img file?
Sent from my HTC One X using xda premium
Yes i tried that as well. for some reason its still rebooting.
So your hboot 1.5 s-on... Hmm did you flash back to 2.17? Cause I say you try to get soff
Sent from my HTC One X using xda premium
I had the same exact problem, yep s-off is necessary in this case
Sent from my PG86100 using xda premium
Issue resolved. just had to flash a different kernel. Still S-on and its working perfectly with meanrom. Thanks everyone for your help
What kernel did you end up going with?
get 4ext recovery, it has smart flash so you won't be having to use guiflash or fastboot.. and boot loops are common with 1.5 hboot
For the future i would recomend installing 4ext recovery its a recovery biult for evo 3d on s-on. It lets you upload difrent roms. You could by that app at the playstore. You shold really check it out.
OK here's what I have have/have done:
HBOOT 1.50, S-ON
I used fastboot to flash 4ext 1.0.0.5 RC5 to the recovery so I wouldn't have to fastboot every time.
I also flashed "AnthraX-htcleak-rls1.zip" (within 4ext) which supposedly fixes reboot loops.
I would perform a "factory wipe" then turn on SmartFlash and then flash an ICS ROM (MeanROM 2.4, Clean ROM ICS RC2, Derp ROM BDM4.1, viperROM B3) and they all rebooted in one of three ways: as soon as I went to unlock, after sitting on the lock screen for about 5 seconds, or without the lock screen ever loading.
I got CleanROM Reborn (gingerbread) to load and I'm using that for now.
PhillyPhoto said:
OK here's what I have have/have done:
HBOOT 1.50, S-ON
I used fastboot to flash 4ext 1.0.0.5 RC5 to the recovery so I wouldn't have to fastboot every time.
I also flashed "AnthraX-htcleak-rls1.zip" (within 4ext) which supposedly fixes reboot loops.
I would perform a "factory wipe" then turn on SmartFlash and then flash an ICS ROM (MeanROM 2.4, Clean ROM ICS RC2, Derp ROM BDM4.1, viperROM B3) and they all rebooted in one of three ways: as soon as I went to unlock, after sitting on the lock screen for about 5 seconds, or without the lock screen ever loading.
I got CleanROM Reborn (gingerbread) to load and I'm using that for now.
Click to expand...
Click to collapse
First off, doing a factory wipe ins't enough generally. Grab superwipe from the first post of MeanROM ICS and flash that first. Do it multiple times to make sure everything gets clean. Then flash the ROM, and finally the AnthraX kernel.
1. superwipe
2. flash ROM
3. flash kernel
It your still have issues after this then you need to get your 3D s-off. Some just have trouble properly flashing the kernel with s-on on an ICS ROM
gonk24 said:
First off, doing a factory wipe ins't enough generally. Grab superwipe from the first post of MeanROM ICS and flash that first. Do it multiple times to make sure everything gets clean. Then flash the ROM, and finally the AnthraX kernel.
1. superwipe
2. flash ROM
3. flash kernel
It your still have issues after this then you need to get your 3D s-off. Some just have trouble properly flashing the kernel with s-on on an ICS ROM
Click to expand...
Click to collapse
OK, so here's what I ended up doing to get it to work:
Unlock the bootloader with the HTC tool
Flash the recovery using fastboot.exe with 4EXT 1.0.0.5 RC5 (I had actually downloaded this on my phone prio to doing anything so I had the zip file with the .img file in it)
Boot in to 4EXT recovery and turn on SmartFlash
Flash the superwipe zip first
Flash the ICS ROM (in this case MeanROM)
Flash the Anthrax zip file
Reboot the phone and let it go through the setup and it was all set!
So the most frustrating part was unlocking the bootloader, because I misread some instructions at first, and it took me a while to realize I could flash 4EXT to recovery to I wouldn't have to keep booting to it through my PC, but it all worked out in the end. I'm now running ICS on my phone and it was still less of a headache than waiting for Sprint.
A lot has changed in the last year and a half or so since I rooted my EVO 4G. Thanks everyone!

EVO 3D CDMA ICS Help

I have the CDMA Evo 3D
*** UNLOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.50.0000
eMMC-boot
It is Rooted and running the Sprint 2.17 odex ROM 2.3.4 Gingerbread
With TWRP Recovery.
I've been reading forums for three weeks. No one has given me a clear answer.
What I want to do is get ICS. Now before you all facepalm and say "Use the wire trick noob" It's not that simple.
My phone was flashed to Boost Mobile. I didn't flash it and I have not the slightest Idea how to flash and according to support at http://www.unlimited.io The wire trick will clear my flash. So the wire trick is a no no.
Now there was a method where you flash the boot.img using fastboot
"fastboot flash boot boot.img"
It pushes it and says success.
Then I reboot into recovery (vol down and power button)
and flash the ROM. It bootloops every single time.
I've been looking for a way to S-Off safely with no luck, so now I'm determined to master the flash process. All i want is One working ICS ROM for my device.
Thanks in advance for the help, Nova.
Have you tried to flash the kernel AFTER flashing the ROM?
It really is being s-on that is causing the issue.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
Have you tried to flash the kernel AFTER flashing the ROM?
It really is being s-on that is causing the issue.
Save the Drama for your Mama with Tapatalk 2
Click to expand...
Click to collapse
Gonna try now will edit with updates
Wiped Cache/dalvik cache now flashing PARANOIDANDROID ICS ROm..
Flash succcessful, pulled the battery and vol down=power into bootloader
now in fastboot, flashing boot.img
Sending...
OKAY
*Random times here*
Finished
Now i've rebooted and the bootanimation is playing. I'll update to tell if it's bootlooping
Yup, still bootlooping.
ried entire process with Cool ICS ROm. NO BOOTLOOP ! YAY!
but instead it shows the homescreen for three seconds then shuts off.
The link below discusses Boost. The poster seems to know a lot about Boost so you might want to PM him about getting s-off. I really do think s-off will fix your issues.
Save the Drama for your Mama with Tapatalk 2
Why don't you just flash a stock gingerbread ROM them stock recovery and relock your bootloader then take the ota update , let it install then unlock via HTC Dev again...
from what I learned from being S-ON with 1.5 unlocked, you have to:
flash the boot.img file BEFORE flashing the ROM. extract it from the ROM push it via fastboot, enter recovery via fastboot then wipe wipe WIPE everything except your SD card 3X, flash ROM, enjoy ICS goodness
mnomaanw said:
Why don't you just flash a stock gingerbread ROM them stock recovery and relock your bootloader then take the ota update , let it install then unlock via HTC Dev again...
Click to expand...
Click to collapse
Can you link me to a guide on this? And is there a guide to root the ICS update?
dgomez720 said:
from what I learned from being S-ON with 1.5 unlocked, you have to:
flash the boot.img file BEFORE flashing the ROM. extract it from the ROM push it via fastboot, enter recovery via fastboot then wipe wipe WIPE everything except your SD card 3X, flash ROM, enjoy ICS goodness
Click to expand...
Click to collapse
I tried it both ways around, it always bootloops.
_xNova said:
Can you link me to a guide on this? And is there a guide to root the ICS update?
Click to expand...
Click to collapse
Both are in the CDMA development stickies. I think rooting is still the same for the new ota.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
Both are in the CDMA development stickies. I think rooting is still the same for the new ota.
Save the Drama for your Mama with Tapatalk 2
Click to expand...
Click to collapse
Found out how to go stock, but I only found bootloader locking tutorials for GSM phones. can you link to stock recovery?
Edit: Nevermind, I found all three.
_xNova said:
Found out how to go stock, but I only found bootloader locking tutorials for GSM phones. can you link to stock recovery?
Click to expand...
Click to collapse
Have you try using live boot-cd by unknownforce (hope not wrong to spell his name)? That method will temp brick your phone so all partition will back to stock, i have try once and my flashed number is disappear and need to reflash carrier once again.
Send From Sprint-HTC-Evo3D MIUI by Dh
dgomez720 said:
from what I learned from being S-ON with 1.5 unlocked, you have to:
flash the boot.img file BEFORE flashing the ROM. extract it from the ROM push it via fastboot, enter recovery via fastboot then wipe wipe WIPE everything except your SD card 3X, flash ROM, enjoy ICS goodness
Click to expand...
Click to collapse
If you are booting recovery via fast boot and then flashing a ROM, there is no need to flash boot.img separately. The recovery will work as if you are s-off. And there is no logic in wiping partitions 3x.....
Or you can directly flash a ROM from recovery without booting recovery via fast boot, and then flash boot.img via fast boot.
Or use 4ext recovery and turn smart flash on, and flash ROMs directly without using fast boot.
mnomaanw said:
If you are booting recovery via fast boot and then flashing a ROM, there is no need to flash boot.img separately. The recovery will work as if you are s-off. And there is no logic in wiping partitions 3x.....
Or you can directly flash a ROM from recovery without booting recovery via fast boot, and then flash boot.img via fast boot.
Or use 4ext recovery and turn smart flash on, and flash ROMs directly without using fast boot.
Click to expand...
Click to collapse
SO If I use 4EXT it'll let me flash ICS even though I currently run Gingerbread? I'll give it a try tonight, thanks
_xNova said:
SO If I use 4EXT it'll let me flash ICS even though I currently run Gingerbread? I'll give it a try tonight, thanks
Click to expand...
Click to collapse
If you can run ics ROM, then yes you can use 4ext recovery.....if you can't run ics in any way then you can't.
mnomaanw said:
If you can run ics ROM, then yes you can use 4ext recovery.....if you can't run ics in any way then you can't.
Click to expand...
Click to collapse
I can't, i'll just wait for an RUU of the OTA update, then re-root and flash ROMs then.
mnomaanw said:
Why don't you just flash a stock gingerbread ROM them stock recovery and relock your bootloader then take the ota update , let it install then unlock via HTC Dev again...
Click to expand...
Click to collapse
i have an stock 3d tto boostmobile, nothing changed no root no unlock, nothing, just a stock phone on boost, i got a ota ready to install, will this delete my flash? just wondering since i would love to have ics but on boost still, thanks.
stang04 said:
i have an stock 3d tto boostmobile, nothing changed no root no unlock, nothing, just a stock phone on boost, i got a ota ready to install, will this delete my flash? just wondering since i would love to have ics but on boost still, thanks.
Click to expand...
Click to collapse
It might my friend..maybe..juuust maybe it will. If it does o0u can always try and reflash back to Boost?
As far as I know, both unknownforce's, and the wire trick to downgrade the bootloader to hboot 1.4 will erase your flash to boost... Ask me how I know...lol!
Have you tried the app flash image GUI? When I was s on, I used this app to flash the kernel, then I went to recovery, and flashed the Rom, and all worked as long as the kernel was compatible with the specific Rom I was flashing, maybe you can try flashing the VM leak kernel, then an ics Rom
sent from my EVO 3D
mnomaanw said:
If you are booting recovery via fast boot and then flashing a ROM, there is no need to flash boot.img separately. The recovery will work as if you are s-off. And there is no logic in wiping partitions 3x.....
Or you can directly flash a ROM from recovery without booting recovery via fast boot, and then flash boot.img via fast boot.
Or use 4ext recovery and turn smart flash on, and flash ROMs directly without using fast boot.
Click to expand...
Click to collapse
That's just the way its ever worked for me so I found it was worth giving out my way at least as an opinion I know once you boot into recovery via fastboot is SUPPOSED to work that way, never did for me hence my weird method. Wiping partitions may not have any logic to you sir, but to some of us it does back from the OG EVO days, that's what devs there used to post, that's what I've gone with as a routine for myself.
I've known peeps who attempt the ROM first boot then reflash boot.img after- endless powercycle. Never happened when I tried it but eh
4EXT wasn't always around so I guess I'm still trying to get used to easier flashin on this phone. I enver used smart flash on this one because when I was S-ON I did it the fastboot method, then the Unknown Force method came to be and I never had a need for it.
Evo 3D on Boost S-off but problems with ICS ROMs
Background:
EVO 3D (CDMA) flashed to Boost Mobile. Sept 2011
Rooted HTC Method Oct 2011
ROMs ROMs ROMs until about 6 months ago (currently using Eternity Infected Rom 1.4.2)
Tried to go to ICS and had problems so did S-off wire trick Aug 2012 (Lost Boost Mobile flash) Had to reflash to Boost.
Now:
****Unlocked****
Shooter XC Ship S-OFF RL
HBOOT 1.50.0000
baseband 97.10.0808
I'm in a quandry at this point of what to do next.
I'm not able to successfully load any of the new ROMs. I tried just upgrading to Infected ROM 2.0 but it also always has issues like it forces me to use skype or email won't open. I'm guessing it is because I load my old data from Titanium backup and it isn't compatible. I tried Mean ROM and it works and changes my kernel but I don't like it as it is full of Sprint Bloatware which does me no good on Boost. I've tried to load the latest Viper ICS ROM and it just stays stuck on the HTC screen.

[Q] Risks on flashing a boot.img?

Hi guys,
I'm getting a little problem installing the cyanogenmod 9 on my device, so I founded that I have to "fastboot flash boot boot.img" when i flash cyano. I know how to do that, but I want to ask you: I kept s-on to prevent damages on my smartphone, are there any serious risks flashing boot that way?
Thanks,
Ruben.
As long as you flash the right one, i dont think so but i am not sure. I s offed few weeks back, i can recommenf it
sent from my almighty forbidden viper evo3d
as long as you flash an evo 3d(cdma OR gsm) boot.img you shouldnt have a problem. At the most the phone will bootloop which can be corrected by flashing the correct boot.img from bootloader
EM|NEM said:
as long as you flash an evo 3d(cdma OR gsm) boot.img you shouldnt have a problem. At the most the phone will bootloop which can be corrected by flashing the correct boot.img from bootloader
Click to expand...
Click to collapse
Flashing a cdma boot.img on a gsm and vice versa can brick your phone if i'm correct.. That's why some flashable kernels have shooter and shooteru files.
As I've read, shooteru is the GSM version isn't it? By the way, I'm SURE the boot is correct, because I take it directly from the ROM I'm going to flash, that is exactly for my device
Ruben92 said:
As I've read, shooteru is the GSM version isn't it? By the way, I'm SURE the boot is correct, because I take it directly from the ROM I'm going to flash, that is exactly for my device
Click to expand...
Click to collapse
Shooteru i gsm yes, if you take the boot.img from the rom it shouldn´t hurt.. since flashing the rom itself is doing the same. It's just a kernel.
I'm doing it, let's see if it works
that why i included the OR its either cdma or gsm. different devices as far as the kernel is concerned
Uff, the ROM keeps rebooting infinite times! Now I'm trying to reflash the rom and boot.img...
First do a full wipe, install rom and then flash kernel
sent from my almighty forbidden viper evo3d
I did this before n i got wifi error so i flash back to custom kernel to get back my wifi. Is there any way to fix wifi error after flashing stock boot.img?
Sent from my HTC EVO 3D X515m using xda premium
klect said:
First do a full wipe, install rom and then flash kernel
sent from my almighty forbidden viper evo3d
Click to expand...
Click to collapse
Done... Something like, uh, 5 times... Didn't worked...
What is your hboot? If its 1.53 the rom wont boot. This hboot is known to have issues with CM. I would suggest you try out some other ics rom for now.
You should get s-off and downgrade your hboot if you want agrabrens CM
Sent from my Evo 3D GSM
---------- Post added at 10:05 AM ---------- Previous post was at 10:01 AM ----------
KayKram said:
I did this before n i got wifi error so i flash back to custom kernel to get back my wifi. Is there any way to fix wifi error after flashing stock boot.img?
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Wifi not working in stock kernel means that the stock kernel isnt compatible with the rom you are trying to run. You could look for a kernel with the most stockish setting. I think anryl, coolexe and "the other one" all can be set up to behave mostly like the stock htc kernel. Just have to tweak it right
Sent from my Evo 3D GSM using Tapatalk 2
I just want to point out to the op that anything you flash on your phone has the potential to damage your phone and worst case scenario: bricking your phone. Just make sure you research and do a lot of reading. But I'm pretty sure you already knew that.
klect said:
First do a full wipe, install rom and then flash kernel
sent from my almighty forbidden viper evo3d
Click to expand...
Click to collapse
hi...im a newcomer...never root any phone before...my phone also still S-OFF...im also want to use CM9 but im also having bootloop...erm...I have some question to ask someone that can help me here...
1. what do you means by FULL WIPE...? hope you can list because im confuse...
2. after im done with FULL WIPE...what should i do first...? either install rom from SD or 'Fastboot flash boot boot.img'....?
Hope you guys can help me...n sorry for my broken english...THANKS
S off or s on? Your phone comes s on, with s off you dont.need fastboot flash. Full wipe in.recovery > wipe all user data + dalvik and cache.
First flash the rom, then flash.kernel
sent from my almighty forbidden viper evo3d
full wipe, install rom, then flash boot.img,
Assuming you have a custom recovery installed, you will have an option to do a full-wipe.. It wipes a few partitions on your device and I believe cache from your phone... It does not wipe your personal data on the sd (other than apps installed on phone) card so don't worry about that. He meant install the rom first then fastboot flash boot boot.img in fastboot.
.
affiqaznan8 said:
hi...im a newcomer...never root any phone before...my phone also still S-OFF...im also want to use CM9 but im also having bootloop...erm...I have some question to ask someone that can help me here...
1. what do you means by FULL WIPE...? hope you can list because im confuse...
2. after im done with FULL WIPE...what should i do first...? either install rom from SD or 'Fastboot flash boot boot.img'....?
Hope you guys can help me...n sorry for my broken english...THANKS
Click to expand...
Click to collapse
Ruben92 said:
Hi guys,
I'm getting a little problem installing the cyanogenmod 9 on my device, so I founded that I have to "fastboot flash boot boot.img" when i flash cyano.
Click to expand...
Click to collapse
If you are using fastboot to flash the boot.img, why not just start your recovery with fastboot using the following command:
fastboot boot recovery.img (where "recovery.img" is the name of the recovery file you flashed)
That will put your recovery in a mode where it can flash boot.img as part of the ROM or kernel zip and then you won't have to extract it to flash it separately. You also need to disable SmartFlash (S-ON) in the tools menu if you are using 4EXT recovery when using the fastboot method.
ramjet73

[Q] cant install ICS

i got an HTC EVO 3D (CDMA/sprint)
its rooted
HBOOT 1.5
unlocked
currently has 4EXT recovery
running gingerbread (synergy)
every time i try to install an ICS rom it freezes on boot (some cases crashes as soon as you see the lockscreen)
i can however install gingerbread roms without problems
ive tried using ota's (what apperantly doesnt work if its rooted and has an recovery flashed)
cwm recovery (which i cant flash kernels)
twrp (can only install ingerbread roms, ICS roms still freeze on boot)
4EXT (first flash boot.img through fastboot than install rom, this works lil bit better than twrp becouse some ICS roms get to the unlock screen befoor they crash)
can anyone please help me? ):
Th3_Frank_XD said:
i got an HTC EVO 3D (CDMA/sprint)
its rooted
HBOOT 1.5
unlocked
currently has 4EXT recovery
running gingerbread (synergy)
every time i try to install an ICS rom it freezes on boot (some cases crashes as soon as you see the lockscreen)
i can however install gingerbread roms without problems
ive tried using ota's (what apperantly doesnt work if its rooted and has an recovery flashed)
cwm recovery (which i cant flash kernels)
twrp (can only install ingerbread roms, ICS roms still freeze on boot)
4EXT (first flash boot.img through fastboot than install rom, this works lil bit better than twrp becouse some ICS roms get to the unlock screen befoor they crash)
can anyone please help me? ):
Click to expand...
Click to collapse
You need to be S-off in order to flash an ICS ROM, unless you use 4EXT smart flash, which isn't guaranteed to work.
DjDom said:
You need to be S-off in order to flash an ICS ROM, unless you use 4EXT smart flash, which isn't guaranteed to work.
Click to expand...
Click to collapse
what is the safest way to get S-OFF
Th3_Frank_XD said:
what is the safest way to get S-OFF
Click to expand...
Click to collapse
Ramjet's guide: http://forum.xda-developers.com/showthread.php?t=1889438
coal686 said:
Ramjet's guide: http://forum.xda-developers.com/showthread.php?t=1889438
Click to expand...
Click to collapse
S-OFF now
but cant install any rom now
Th3_Frank_XD said:
S-OFF now
but cant install any rom now
Click to expand...
Click to collapse
OK, some more information would help, like why can't you install them? Are you getting an error? Are you flashing the correct hboot?
sitlet said:
OK, some more information would help, like why can't you install them? Are you getting an error? Are you flashing the correct hboot?
Click to expand...
Click to collapse
ive got TuopunutBear's custom HBOOT 1.50.5050
and im in an bootloop (it crashes right after the HTC logo)
cant even flash GB roms anymore
You need to be using either the sprint 1.58 or the vm 1.57 hboots afaik
You just need to get back the bootloader first - take out the battery, put it back in, power on, hold volume down...
dstrcto said:
You need to be using either the sprint 1.58 or the vm 1.57 hboots afaik
Click to expand...
Click to collapse
i'm already at the bootloader
how do i flash those HBOOT's?
(i want to install the Viper3D rom with anthrax kernel)
Make sure you are S-OFF and have a compatible firmware/HBOOT.
Th3_Frank_XD said:
ive got TuopunutBear's custom HBOOT 1.50.5050
and im in an bootloop (it crashes right after the HTC logo)
cant even flash GB roms anymore
Click to expand...
Click to collapse
Frank....I think the issue is you probably installed the wrong rom version....This is very important that you install the correct rom for Evo 3d GSM or CDMA version or you would get Bootloop...I would suggest you install this rom http://forum.xda-developers.com/showthread.php?t=1991150
and make sure you use 4EXT latest version, S-Off, Unlocked...
This rom is Viper3d Sense 4.1 and the most stable and fast ICS rom so far for GSM and CDMA......Since you have S-off and unlocked...you dont have to flash the boot.img separately....just copy the rom files to Sdcard then follow my instruction:
1)Do a full wipe (Wipe data/reset factory, Wipe cach+davik, Format partrition [without Sdcard])
2)Install from zip card,,,then choose the rom....
3)Reboot...it should work great if you do as i said.....
Furthermore....i would recommend you install Anthrax kernel....i dont know if the forum is allow me to send the link here.....??
hongsydney said:
Frank....I think the issue is you probably installed the wrong rom version....This is very important that you install the correct rom for Evo 3d GSM or CDMA version or you would get Bootloop...I would suggest you install this rom http://forum.xda-developers.com/showthread.php?t=1991150
and make sure you use 4EXT latest version, S-Off, Unlocked...
This rom is Viper3d Sense 4.1 and the most stable and fast ICS rom so far for GSM and CDMA......Since you have S-off and unlocked...you dont have to flash the boot.img separately....just copy the rom files to Sdcard then follow my instruction:
1)Do a full wipe (Wipe data/reset factory, Wipe cach+davik, Format partrition [without Sdcard])
2)Install from zip card,,,then choose the rom....
3)Reboot...it should work great if you do as i said.....
Furthermore....i would recommend you install Anthrax kernel....i dont know if the forum is allow me to send the link here.....??
Click to expand...
Click to collapse
Did format thingy this time
(was already using these roms)
but i still have the bootloop
Th3_Frank_XD said:
S-OFF now
but cant install any rom now
Click to expand...
Click to collapse
I had this issue. If every Rom you flash bootloops, you may want to run the ruu.exe to reset your phone (you'll still be s-off). Hopefully this will get your phone booting. Then flash a custom hboot (I use 1.4 revolutionary) and then custom recovery (I use 4ext). You should be able to flash anything at that point (except a select few roms).
You can get the ruu.exe and other files from the thread I linked earlier.
GET HBOOT 1.49.0007 unlocked and s-off and 4ext as recovery then it should.work with most roms!
MistedEvo said:
GET HBOOT 1.49.0007 unlocked and s-off and 4ext as recovery then it should.work with most roms!
Click to expand...
Click to collapse
NO, NO, NO! He's CDMA and that's a GSM hboot. Don't flash that or it'll be trouble.
coal686 said:
NO, NO, NO! He's CDMA and that's a GSM hboot. Don't flash that or it'll be trouble.
Click to expand...
Click to collapse
Wait, is he REALLY CDMA?
I'm confused right now.
It says he's from Europe, which usually uses GSM.
-shrugs-
Well, all I have to add is if you're flashing the kernel right away, don't set the overclock value to high, that's what causes bootloops/hangs.
Set your max cpu to stock (1188 MHz) for now. Then once it boots, overclock. I find that anything fast 15XX MHz causes bootloops with new versions of kernels.
I bought it from ebay becouse it was so much cheaper (I know europe is gsm only)
do I have to run an ruu or flash hboot
And which versions of those
Sent from my M9300 using xda app-developers app
First i need to identify what version of phone you are using frank...do you use simcard?if yes...then your phone is Gsm...otherway is Cdma....let me know first
hongsydney said:
First i need to identify what version of phone you are using frank...do you use simcard?if yes...then your phone is Gsm...otherway is Cdma....let me know first
Click to expand...
Click to collapse
it is CDMA from sprint
Go to this website www.htcruu.com and make sure you install the correct ruu to return to stock rom. At first you need to lock your phone by using fastboot flash lock oem....(google how to lock your phone ) then run the ruu file...
After that, unlock your phone again. So tour phone now would be Unlocked+S-off. At thia stage,you can install viper3d rom without problem...make sure you choose ruu for sprint with ics+radio 11.77

Categories

Resources