Related
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Try wiping the Dalvik cache through recovery
wnazri said:
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Click to expand...
Click to collapse
Could you please mention your baseband as well. As the theme is meant for the 2.0.2.A.0.24 version of 2.1 only.
Hope this helps
Regards
kLouD
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
kloud_ said:
Could you please mention your baseband as well. As the theme is meant for the 2.0.2.A.0.24 version of 2.1 only.
Hope this helps
Regards
kLouD
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
Click to expand...
Click to collapse
yes im using the 2.0.2.A.0.24 version of 2.1. Tried wiping dalvik cache but still hang.
Any other suggestion?
wnazri said:
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Click to expand...
Click to collapse
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Niwei, if SEUS is not working, u might just have to FLASH ur phone again using the flasher made by B4nary.. find it in the other threads.. might help in ur reading.. Since ur already using xrecovery and ur phone is already rooted, try to flash beta3 un your phone then if u dont like 2.2, reflash using SEUS.. hope this helps..
yoh_ivan said:
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Niwei, if SEUS is not working, u might just have to FLASH ur phone again using the flasher made by B4nary.. find it in the other threads.. might help in ur reading.. Since ur already using xrecovery and ur phone is already rooted, try to flash beta3 un your phone then if u dont like 2.2, reflash using SEUS.. hope this helps..
Click to expand...
Click to collapse
i've been thinking to go for 2.2 but how? could you provide some links or steps for me bcoz i tried to flash using FlashTool made by Bin4ry but once i reboot and press the back button it will enter the xRecovery screen.
yoh_ivan said:
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Click to expand...
Click to collapse
There is also a version for 2.1 as stated in the title and in the thread, but if they've flashed the wrong one then obviously it wont work.
wnazri said:
i've been thinking to go for 2.2 but how? could you provide some links or steps for me bcoz i tried to flash using FlashTool made by Bin4ry but once i reboot and press the back button it will enter the xRecovery screen.
Click to expand...
Click to collapse
you might wanna try this using the xrecovery..
http://forum.xda-developers.com/showthread.php?t=900441
@XperiaX10User - oh yeah your right.. my bad..
Wow... people actually go installing things on there cell without reading posts properly... ?!! :amazed:
Sorry didn't mean to be rude but you should read the post carefully first before installing themes and apk
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
I had this problem once.. I got stuck at SE White logo.. i tapped and went back to xRecovery, reinstalled free x10 and now works like a charm.
kloud_ said:
Wow... people actually go installing things on there cell without reading posts properly... ?!! :amazed:
Sorry didn't mean to be rude but you should read the post carefully first before installing themes and apk
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
Click to expand...
Click to collapse
maybe i miss something when reading the post and as i mention earlier im a newbie.
Thanks everyone for all ur opinion and suggestion. i manage to install 2.2.1 beta3 using xRecovery. now i need to explore more before i crash my phone again
My mistake mate. It was just a tip.
Anyways make sure you backup the Rom before exploring ;-)
Enjoy your new Rom dude
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
stuck in boot screen too
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
keelz said:
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Click to expand...
Click to collapse
Partition? ext* system?
I think give xrec another shot. Keep pressing back key repeatedly when "SE" logo is displayed. Works for me everytime. Btw which ROM you on?
If that doesn't works then use flash tool 0.2.6 by bin4ry and use the guide by androxyde to re-install xRecovery.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
Correct me if I am wrong. But doesnt Xrecovery have a Factory Reset option ?
Aside from that, I thought I had bricked my phone a week or so ago when Z released Beta 4. I could boot up to the SE Logo and go no further, couldnt even get into xrecovery. However, give this a shot, it worked for me to get it into flash mode so I could do a recovery on SEUS..
- Pop you battery out
- Connect USB Cord without batter in.
- Reinsert Batter while holding Back button
- The Screen should light up white for a split second but go back off.
- The Green Light at the top of the phone should stay on now
That should put you into Flash Mode for SEUS. The just do a recovery.
Yes, you will loose all of your information but hey, atleast you arn't buying another phone.
_____
Next time, read the post cleary and don't just think you know what your doing.
If the FW Version doesnt match you can lock your phone up pretty good.
If the Base Band doesn't match up, then you can mess up your Service and possibly put your phone into a repeating boot cycle.
Xperia x10
Blue Sparks v5
xKrisx Mod
xKrisx said:
Correct me if I am wrong. But doesnt Xrecovery have a Factory Reset option ?
Aside from that, I thought I had bricked my phone a week or so ago when Z released Beta 4. I could boot up to the SE Logo and go no further, couldnt even get into xrecovery. However, give this a shot, it worked for me to get it into flash mode so I could do a recovery on SEUS..
- Pop you battery out
- Connect USB Cord without batter in.
- Reinsert Batter while holding Back button
- The Screen should light up white for a split second but go back off.
- The Green Light at the top of the phone should stay on now
That should put you into Flash Mode for SEUS. The just do a recovery.
Yes, you will loose all of your information but hey, atleast you arn't buying another phone.
_____
Next time, read the post cleary and don't just think you know what your doing.
If the FW Version doesnt match you can lock your phone up pretty good.
If the Base Band doesn't match up, then you can mess up your Service and possibly put your phone into a repeating boot cycle.
Xperia x10
Blue Sparks v5
xKrisx Mod
Click to expand...
Click to collapse
Yes, xRecovery has a factory reset option to format data on your phone.
Its a full wipe. You lose all you data.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
** Please hit "Thanks" of someone helps you in anyway.**
keelz said:
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Click to expand...
Click to collapse
Mate..u should try the steps provide by xKrisx
You cant access xrecovery bcoz you have formatted the sdcard
Sent from my X10i using XDA App
My x10 is stuck in a boot loop after I flashed the ROM.
How do i stop this from happening? I really like the look of the ROM over my current one.
Please help.
EDIT: Managed to get freex10 ROM running. So I have a useable phone now.
flash baseband which is included in the package and you should be fine
what bb are you using?
Sent from my X10 TripNMiUI-IRIS using XDA Premium App
Same Issue I think
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
You probably need to use flashtool to flash the .52 baseband fix. Unless you have .52 already.
If that doesnt work, try flashing 2.1 totally over again with flashtool.
Sent from my X10i using XDA Premium App
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
ChrisDude70 said:
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
Click to expand...
Click to collapse
Will send you some links on a second. Will post them here with guides too.
Flashtool:
http://forum.xda-developers.com/showthread.php?t=920746
The flashtool guide:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Sent from my X10i using XDA Premium App
To get out of the bootloop just flash back to 2.1 and start over again. And make sure to follow the instalation instructions given by the dev when flashing the rom.
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
ChrisDude70 said:
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
Click to expand...
Click to collapse
The file you use in flashtool is an .ftf file
Sent from my X10i using XDA Premium App
Then what do I do with a .zip?
yes, you DO flash the .zip file with xrecovery. step one, flash bb with flashtool, step two, start phone in xrecovery and flash .zip, reboot, and it should work.
Sent from my X10i using XDA Premium App
drearystate said:
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
Click to expand...
Click to collapse
first try SEUS that comes on your ROM( left click SE icon in 'my computer' install) if that one doesn't work, uninstall and install SEUS from SE site, but one of them will say 'repair'
Sent from my X10i using XDA Premium App
ps: make sure your phone is fully charged
Sent from my X10i using XDA Premium App
Yeah, that's what I did the first time.
I just tried it again. Same problem.
Phone turns on, boots, sits on home screen for a few seconds then restarts.
Why would this happen?
EDIT: I managed to check the baseband version int he few seconds the phone was on, it says it is unknown. Would this cause this problem?
http://forum.xda-developers.com/showthread.php?t=928343
The ftf files you need are on the second post. Just put the ftf file in the firmware section of the flashtool then flash it and follow the on screen instructions.
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
I tried that, It keeps telling me I have my old Cyanogen mod for 2.2 installed when I do it.
In the process of running SEUS, hopefully it puts me back to 2.1
Chris603 said:
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
Click to expand...
Click to collapse
Could that stop the rebooting?
ChrisDude70 said:
Could that stop the rebooting?
Click to expand...
Click to collapse
No, i dont think that is the cause of the rebooting cause ii get that a lot but the phone never reboots on me, what kernel are you on. Cause a lot of the custom kernels reboot when the screen is off or when you have the cpu up too high.
Hi,
As of yesterday, just out of nowhere, my Xpiria mini started randomly rebooting itself in a loop...at first it happened once every few hours and then the phone went back to normal, but now it just happens non-stop, and i can't use the phone at all!
some background:
my phone was rooted and the bootloader unlocked, as a result of solving an overheating issue a few months ago..
so, at first i thought that maybe upgrading the software will solve the rebooting problem, but i couldn't install the upgrade version...i guess because i already messed with the phone in the past it won't let me upgrade it in a "normal" way (tried via pc-companion and via the phone itself).
anyway, i guess i have 2 questions...1. how do i solve the rebooting problem? 2. how do i upgrade the software?
(i don't know much about phones etc, so if you could give me a detailed step-by-step explanation it would be great, and would save many of my stupid questions
please help, my phone is completely useless at the moment...
Use flashtool and flash stock gingerbread or ics firmware. Take a look at the stickies for the firmware and guide about how to do it.
.:goutham:.
gouthamthemostwanted said:
Use flashtool and flash stock gingerbread or ics firmware. Take a look at the stickies for the firmware and guide about how to do it.
.:goutham:.
Click to expand...
Click to collapse
Did everything the guides said, upgraded to ICS which works great, with one "little" problem- the phone only works when connected to charger/pc...
the moment i disconnect it (even when fully charged) the screen goes black and nothing works...it vibrates once when pressing the power button, like it's turning on, but nothing happens...
Hello, Mr. After unlocking ur BT loader, u cant use pc companion for upgrading and degrading, it wont work properly, so use flashtool and every ting wil be fine
Sent from my WT19i using xda premium
stanlin salu said:
Hello, Mr. After unlocking ur BT loader, u cant use pc companion for upgrading and degrading, it wont work properly, so use flashtool and every ting wil be fine
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Hey, thanks for the reply...i upgraded to ICS using flashtool, didnt use pc companion...so i don't think that's the problem
Open the cwm recovery then go to advance & wipe delvik cache.
Then reboot.
Sent from my ST15i using xda premium
YBS14881 said:
Open the cwm recovery then go to advance & wipe delvik cache.
Then reboot.
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
Wiping dalvik cache won't help, it does nothing, because dalvik cache will be rebuilt on every reboot anyway :good:
So is there any chance solving this or the phone is dead?? :crying:
starch11 said:
So is there any chance solving this or the phone is dead?? :crying:
Click to expand...
Click to collapse
So you are on ics right now, but it won't boot? Is there any vibration or nothing? Can you flash a custom kernel and enter cwm? Can you charge it?
mihahn said:
So you are on ics right now, but it won't boot? Is there any vibration or nothing? Can you flash a custom kernel and enter cwm? Can you charge it?
Click to expand...
Click to collapse
RIght now it's on ICS..it works fine, but ONLY when connected to a charger/usb..the moment i disconnect the cable it shuts off and won't boot at all, no vibration or anything...the moment i put the cable back in it starts normally and works well...
Just flash it with flashtool. Ics generic can be used for flash.
Sent from my ST15i using xda app-developers app
si josh said:
Just flash it with flashtool. Ics generic can be used for flash.
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
already did that...still won't boot unless connected to charger.
Are you really sure the battery is okay? Maybe this is the reason? Because if it's bricked up (it=the battery) you can only boot when the usb cable is inserted and you won't get any other reactions...
Maybe you can try another one from a friend and report?
mihahn said:
Are you really sure the battery is okay? Maybe this is the reason? Because if it's bricked up (it=the battery) you can only boot when the usb cable is inserted and you won't get any other reactions...
Maybe you can try another one from a friend and report?
Click to expand...
Click to collapse
I'll get another battery in a couple of days and see if it works...i hope it does, i really love this phone!
thanks for the help so far...
Hi guys,
I had a rooted X10 on stock ROM, however it started to lag recently and I've decided to restore it to factory settings.
Restored to factory settings, phone restarted and stuck on SE logo.
Flashed stock firmware with Flashtool, flashing went successfully, but still stuck on SE logo!
I dont remember the bootloader unlock status neither baseband version, its my mothers phone... For sure, I removed SD card. Tried flashing 3 times, no luck.
What should I do? Thanks in advance for all that will reply...
Summer Son said:
Hi guys,
I had a rooted X10 on stock ROM, however it started to lag recently and I've decided to restore it to factory settings.
Restored to factory settings, phone restarted and stuck on SE logo.
Flashed stock firmware with Flashtool, flashing went successfully, but still stuck on SE logo!
I dont remember the bootloader unlock status neither baseband version, its my mothers phone... For sure, I removed SD card. Tried flashing 3 times, no luck.
What should I do? Thanks in advance for all that will reply...
Click to expand...
Click to collapse
Did you try SEUS ??
Sent from my X10i using xda app-developers app
EzzyLupe said:
Did you try SEUS ??
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
No. Does it worth it? Flashtool does the same and even more low-level flashing, afaik...
Summer Son said:
No. Does it worth it? Flashtool does the same and even more low-level flashing, afaik...
Click to expand...
Click to collapse
Yea, sometimes flashtool doesn't fix all the issues so best thing to try SEUS or Sony PC
Sent from my X10i using xda app-developers app
EzzyLupe said:
Yea, sometimes flashtool doesn't fix all the issues so best thing to try SEUS or Sony PC
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
I have the same problem but seus and sony pc doesn't work, it sayr no software available for my phone... :s
If you have cwm or stock recovery
Try wipe data / factory reset
Wipe chace partition
Wipe dalvik chace
EzzyLupe said:
Yea, sometimes flashtool doesn't fix all the issues so best thing to try SEUS or Sony PC
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Just tried SEUS, despite it said I have a latest software I choose Install and it reinstalled again, but still stuck on logo.
sembre said:
If you have cwm or stock recovery
Try wipe data / factory reset
Wipe chace partition
Wipe dalvik chace
Click to expand...
Click to collapse
I checked those options in Flashtool, didnt help.
Could this be a problem with a bootloader? Is it being flashed separately, not in firmware? Or maybe Broadband?
When i try to repair with sony pc, it says no software available for my phone, what can i do?
MigueLampreia said:
When i try to repair with sony pc, it says no software available for my phone, what can i do?
Click to expand...
Click to collapse
try reflash kernel worked before you got this error
Sent from my GT-S5360 using xda app-developers app
Tried flashing different firmwares, incl. 2.3.1, still no luck.
Summer Son said:
Tried flashing different firmwares, incl. 2.3.1, still no luck.
Click to expand...
Click to collapse
Before you got this problem remembered your firmware or and kernel
Reflash with that's firmware and or kernel
Good luck
sembre said:
Before you got this problem remembered your firmware or and kernel
Reflash with that's firmware and or kernel
Good luck
Click to expand...
Click to collapse
I dont remember them, however I know it was stock and latest. Also, does it matter if kernel is also included in the firmware?
Take SD card out
Use SEUS http://www.sonymobile.com/global-en/tools/update-service/
Repair
Done
Had the same problem on mine, seus was the only fix for mine
Happened a few times. Just uses seus everytime
Sent from my LT22i using xda premium
wo88les said:
Take SD card out
Use SEUS http://www.sonymobile.com/global-en/tools/update-service/
Repair
Done
Had the same problem on mine, seus was the only fix for mine
Happened a few times. Just uses seus everytime
Sent from my LT22i using xda premium
Click to expand...
Click to collapse
Used SEUS, it went through repair but still no luck.
Repair through pc companion?
Sent from my Xperia X10 using xda app-developers app
Hello,
I did an insane mistake. I successfully rooted my neo L. In order to backup apps and remove bloatware, I installed Titanium Backup.
But during uninstall of bloatware by Titanium I forgot to uncheck some crucial apps, and in panic, I accidentally removed my battery.
And then after I inserted it and restarted, I got stuck in the bootloop.
Symptoms-
1. No LED blinks
2. Cant get into recovery mode (power button press + repeatedly pressing up volume button)
3. Repears after SONY logo is shown.
I tried the following using flashtool, with no success-
1. Reflashed the "MT11i_4.1.A.0.562_kernel" and "Neo L_4.0.4_MT25i Kernel Only"with using DoomLord's root toolkit in between..
2. Reflashed with "MT11i_4.1.A.0.562_kernel" and "MT25i_4.1.B.0.631_KERNEL ONLY" with DoomLord's root toolkit in between.
Can somebody please help me???
Try repairing your phone through SUS and come back if it helps.
Sent from my heavily modded MT11i using xda Premium
creepycow said:
Try repairing your phone through SUS and come back if it helps.
Sent from my heavily modded MT11i using xda Premium
Click to expand...
Click to collapse
SUS isnt supported anymore. And PC companion is no help either.
Is there another way?
Fusion_RIP said:
SUS isnt supported anymore. And PC companion is no help either.
Is there another way?
Click to expand...
Click to collapse
Flash the full ftf using flash tool
Build 4.1.B.0.631
ƒεηιx said:
Flash the full ftf using flash tool
Build 4.1.B.0.631
Click to expand...
Click to collapse
That ftf didn't flash properly. I tried several times.
I solved it using PC companion finally. It wasn't detecting my phone earlier for some driver issue which may have failed to install. Anyway, it worked now, and I fully repaired the ROM, but lost data, as expected.:good: