So I rooted using revolutionary.io tool on hboot 1.40.1100 and now have to unroot it. From what I have gathered the way to do it is to flash the full ruu 1.13.651.7 PG86IMG.zip file through the hboot. Is this right? And if so does anybody have a link to the full ruu zip??
Thanks
Download the appropriate RUU version for your region here:
http://forum.xda-developers.com/showthread.php?t=1208485 run the .exe and follow the onscreen instructions.
to change s-off to s-on in fastboot (cmd) type "fastboot write secureflag 3"
Related
Hi... I tried to update my firmware last night but ended up with a relocked hboot 1.57 s-off. I could have swore I downloaded Freeza's firmware with hboot removed. After hours of searching here I am. If anyone can help me get back to 1.40 I would greatly appreciate it, really need my phone for work. Thanks
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1192306
Download the 1.40 Hboot link
then boot into fastboot
then run:
fastboot oem rebootRUU
an HTC screen will appear then run:
fastboot flash zip PG86IMG_1.40-hboot.zip
After it finishes flashing, the console will say it is done but the image on the screen may not complete. I usually wait a bit then run:
fastboot reboot-bootloader
It should reboot and you should see 1.40 again
Hello. I have a GSM Evo 3d, 1.53.0007 hboot (unlocked via HTC Dev), after that S-OFF via JBEAR, now I'm on stock hboot locked with S-OFF. After that I can't install 4Ext. When I use fastboot i got info remote: not allowed (I supose that this is because I'm S-ON). Can I flash 4Ext directly in hboot? Does any1 have this recovery as a PG86IMG.ZIP? Or is there any other way to flash it? Cheers
c000ler said:
Hello. I have a GSM Evo 3d, 1.53.0007 hboot (unlocked via HTC Dev), after that S-OFF via JBEAR, now I'm on stock hboot locked with S-OFF. After that I can't install 4Ext. When I use fastboot i got info remote: not allowed (I supose that this is because I'm S-ON). Can I flash 4Ext directly in hboot? Does any1 have this recovery as a PG86ING.ZIP? Or is there any other way to flash it? Cheers
Click to expand...
Click to collapse
JBear will leave the bootloader locked which will prevent most fastboot commands from running if you didn't choose the JuopunutBear bootloader when prompted by controlbear. If you don't have "JuopunutBear" at the top of your bootloader you can download the JBear custom bootloader for your phone and Android version (GB or ICS) from the unlimted.io website and install it using the instructions on that site, then you should be able to run the fastboot commands needed for flashing.
ramjet73
c000ler said:
Hello. I have a GSM Evo 3d, 1.53.0007 hboot (unlocked via HTC Dev), after that S-OFF via JBEAR, now I'm on stock hboot locked with S-OFF. After that I can't install 4Ext. When I use fastboot i got info remote: not allowed (I supose that this is because I'm S-ON). Can I flash 4Ext directly in hboot? Does any1 have this recovery as a PG86IMG.ZIP? Or is there any other way to flash it? Cheers
Click to expand...
Click to collapse
There's 2 simple ways to do this, depending on whether you want jb hboot or not.
Regardless of whether you want it or not, download the correct hboot for your device from here: http://unlimited.io/downloads/hboots/
If you want to change your hboot from ***LOCKED*** to =Juopunutbear= :
then rename your recovery image to "recovery.img" & drag-and-drop the recovery.img file onto jb_hboot.zip to add it to the zip
Then, use the commands given here to flash it: http://unlimited.io/jbhboots.htm
If you want to keep your hboot as ***LOCKED*** :
then rename your recovery image to "recovery.img" & drag-and-drop the recovery.img file onto jb_hboot.zip to add it to the zip
Open the jb_hboot.zip file & delete the .nb0 file that might have a long name (something like"hboot_....nb0"
Then, use the commands given here to flash it: http://unlimited.io/jbhboots.htm
I've flashed Jbear hboot, everything works like a charm. Restoring my backup now. Thanks for fast answers.
c000ler said:
I've flashed Jbear hboot, everything works like a charm. Restoring my backup now. Thanks for fast answers.
Click to expand...
Click to collapse
:good: And there's a button for thanks mate
Can I use the same method to flash only bootloader (official 1.53.0007). This is what i thought about: extract hboot from ruu (hboot_SHR_U_1.53.0007_20120522_signedbyaa.nb0), add this to archive with android-info.txt and then use the same commands when I was flashing jbear hboot? Can I downgrade bootloader to 1.49.0007 using this method and will this hboot work well with ICS?
Hi. I downgraded my hboot to 1.49.007 with URT.
Now I can't flash RUU. I have error 131. When I type fastboot oem readcid i have HTC_032, but when I type fastboot getvar cid I get 0202. I'm trying to flash RUU_Shooter_U_HTC_Europe_1.20.401.2_Radio_10.53.9020.00_10.13.9020.08_2M_release_203403_signed and /RUU_Shooter_U_HTC_Europe_1.20.401.8_Radio_10.59.9020.00_10.15.9020.06_M_release_219793_signed. What I have to do?
You have to extract the PG86IMG.zip from the RUU and flash it trough the bootloader.
1_S-off from unlimited.io if hboot 1.49.0009-> 1.53.0007 or revolutionary.io if hboot 1.49.0007 or hboot 1.49.0008
2_download PG86IMG.zip from http://depositfiles.com/files/90ondkrk0
3_copy the zip to sdcard
4_go to bootloader wait for it to finish scanning and checking the image then click yes(volume up)
5_wait for it to finish then reboot
6_Go to fastboot
7_Type fastboot oem writesecureflag 3
8_fastboot reboot-bootloader
I'm S-OFF and have 1.49.0007 hboot. I have done that with joupunutbear method and i don't understand the first step, I have to do S-OFF steps again? Also if I'm on custom rom I'm doing those steps and then I start RUU .exe?
http://forum.xda-developers.com/showthread.php?t=2293919&page=15&nocache=1
Followed the tutorial above to revert back to stock and couldn't get my Hboot to 1.15 and i was stuck on 1.33. Anyway spent some of today and got it figured out and worked 100%.
The problem was step - 3. run the RUU as admin (right click, run as administrator) ** If you get an Image 158 error during RUU, try flashing the stock hboot -SEE POST 4**
1. download 1.15 stock hboot: 1.15 stock hboot MD5: B4B8555C20724E12C3B9D33820746E50
2. Rename stock hboot file to : PL83IMG.zip and place in the folder that contains your fastboot.exe file (On your computer)
3. Flash hboot.
after installation do the following -
adb devices (your device should be listed)
adb reboot bootloader
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
fastboot getvar cid (verify your stock CID)
fastboot oem writesecureflag 3
fastboot reboot-bootloader
Kept on getting error 158 and couldn't change Hboot so i tried run the command to write the cid "fastboot oem writecid VZW__001" then ran the ruu again and it worked. Its wasn't working because the phone wasn't recognized because of the CID. I couldn't reply in that thread because i don't have 10+ posts. Please hit the thanks button if it works for you as well.
Its my second post so take it easy on me if its been covered already.
Not true. With supercid any RUU can be flashed.
I RUU'd two days ago with supercid. Hboot does need to be stock if using the HTC program to flash.
Abu. said:
http://forum.xda-developers.com/showthread.php?t=2293919&page=15&nocache=1
Followed the tutorial above to revert back to stock and couldn't get my Hboot to 1.15 and i was stuck on 1.33. Anyway spent some of today and got it figured out and worked 100%.
The problem was step - 3. run the RUU as admin (right click, run as administrator) ** If you get an Image 158 error during RUU, try flashing the stock hboot -SEE POST 4**
1. download 1.15 stock hboot: 1.15 stock hboot MD5: B4B8555C20724E12C3B9D33820746E50
2. Rename stock hboot file to : PL83IMG.zip and place in the folder that contains your fastboot.exe file (On your computer)
3. Flash hboot.
after installation do the following -
adb devices (your device should be listed)
adb reboot bootloader
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
fastboot getvar cid (verify your stock CID)
fastboot oem writesecureflag 3
fastboot reboot-bootloader
Kept on getting error 158 and couldn't change Hboot so i tried run the command to write the cid "fastboot oem writecid VZW__001" then ran the ruu again and it worked. Its wasn't working because the phone wasn't recognized because of the CID. I couldn't reply in that thread because i don't have 10+ posts. Please hit the thanks button if it works for you as well.
Its my second post so take it easy on me if its been covered already.
Click to expand...
Click to collapse
Changing the cid was only needed for the jtag or face palm methods...