Here is my story how i did the restore of mmcblk1p18 partition.
At the begining i swaped blank mmcblk1p18 to get chinies ICS
After awhile got t-mobiles ICS and then the european one.
At first place i wasnt rooted at all, so i sought for solution.
Finaly found a way to gain root.
After that i tried to roll back to my original mmcblk1p18 without success.
So i took a time to think a little bit and then i have realized how it could be done.
The guid is pointed to the peaple who got Original mmcblk1p18 and cant be restored.
And Please Read First prepare your self and then do things!!!
Here is the steps:
1) You must be rooted and have european ICS
2) You must know what is your region device is, download correct GB firmware.
3) Restore your original mmcblk1p18 partition and reboot to fastboot mode.
4) Flash" fastboot flash mbm allow-mbmloader-flashing-mbm.bin " of your GB
firmware!
5) Flash mbr and ebr files "GB Firmware"
6) Download Files from this thread http://forum.xda-developers.com/showthread.php?t=1688241
7) Flash boot_new.img and system_signed from the thread above.
8) Go to recovery and flash european ICS reboot and wait....
Good Luck!!!
Sorry for my poor english .
i have same problem... can't restore mmcblk1p18..
thx for your tutorial.. but need more spesific steps..
1) You must be rooted and have european ICS
link download?
must be flashing with this? >>> http://forum.xda-developers.com/showthread.php?t=1688241
2) You must know what is your region device is, download correct GB firmware
I know.. and I have firmware Asia Retail 2.3.6
3) Restore your original mmcblk1p18 partition and reboot to fastboot mode
at european ICS?
Ramdanih said:
i have same problem... can't restore mmcblk1p18..
thx for your tutorial.. but need more spesific steps..
1) You must be rooted and have european ICS
link download?
must be flashing with this? >>> http://forum.xda-developers.com/showthread.php?t=1688241
2) You must know what is your region device is, download correct GB firmware
I know.. and I have firmware Asia Retail 2.3.6
3) Restore your original mmcblk1p18 partition and reboot to fastboot mode
at european ICS?
Click to expand...
Click to collapse
1) Correct mustbe flashing this>>> http://forum.xda-developers.com/showthread.php?t=1688241
2)Thats Cool becouse ive got the same firmware
3)restore when you at ICS -EU
rossgucci said:
1) Correct mustbe flashing this>>> http://forum.xda-developers.com/showthread.php?t=1688241
2)Thats Cool becouse ive got the same firmware
3)restore when you at ICS -EU
Click to expand...
Click to collapse
ok thx fo your respone..
downloading and flashing [GSM][ICS][LEAKS] 651.167.26.XT910.Retail.en.EU OTA 672.180.17.XT910.Retail.en.EU
next steps, I will report and asking again..
thx in advance
sry for my english
now i'm on 67.145.3.XT910.ChainaRetail.en.CN (Root) witch secure kenal version and i also backup mmcblk1p18 before i update to ICS. can i restore to original 2.3.6 GB ?. manythanks.
thepsen said:
now i'm on 67.145.3.XT910.ChainaRetail.en.CN (Root) witch secure kenal version and i also backup mmcblk1p18 before i update to ICS. can i restore to original 2.3.6 GB ?. manythanks.
Click to expand...
Click to collapse
see this link http://forum.xda-developers.com/showthread.php?t=1666930
Ramdanih said:
see this link http://forum.xda-developers.com/showthread.php?t=1666930
Click to expand...
Click to collapse
That thread is about going back from 120 not 145
145 includes the new secure kernel, there is no known way back to GB from the new secure ics kernel
FrAsErTaG said:
That thread is about going back from 120 not 145
145 includes the new secure kernel, there is no known way back to GB from the new secure ics kernel
Click to expand...
Click to collapse
thx for correction...
@rossgucci
I not understand..
how to steps 4-7..?
just flashing stock gingerbeard with RSD lite? or how?????
FrAsErTaG said:
That thread is about going back from 120 not 145
145 includes the new secure kernel, there is no known way back to GB from the new secure ics kernel
Click to expand...
Click to collapse
Not counting this is exactly what this thread deals with.
http://forum.xda-developers.com/showthread.php?t=1666930
Enviado de meu XT910 usando o Tapatalk 2
pedrotorresfilho said:
Not counting this is exactly what this thread deals with.
http://forum.xda-developers.com/showthread.php?t=1666930
Enviado de meu XT910 usando o Tapatalk 2
Click to expand...
Click to collapse
No its not
it deals with 67.2.120.XT910.ChinaRetail.en.CN
not 67.145.3.XT910.ChainaRetail.en.CN
???
FrAsErTaG said:
No its not
it deals with 67.2.120.XT910.ChinaRetail.en.CN
not 67.145.3.XT910.ChainaRetail.en.CN
???
Click to expand...
Click to collapse
Yes, it's. Read again.
I said this thread is talking about the 67.2.120.XT910.ChinaRetail.en.CN, wich is the same on the other thred.
This one is a 'copy n paste' from the other post.
Ramdanih said:
thx for correction...
@rossgucci
I not understand..
how to steps 4-7..?
just flashing stock gingerbeard with RSD lite? or how?????
Click to expand...
Click to collapse
Via fastboot command line
Unless he flashed it different, like i did...
By putting 145's system.img inside 120 fastboot...
I can still downgrade that way
Sent from my XT910 using Tapatalk 2
farhanito said:
Unless he flashed it different, like i did...
By putting 145's system.img inside 120 fastboot...
I can still downgrade that way
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Nice idea btw. Thank you. What are the differences between 120's and 145's system partitions? Are there any significant improvements?
I didn't notice any...
But webtop is no longer beta
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
Yes, it's. Read again.
I said this thread is talking about the 67.2.120.XT910.ChinaRetail.en.CN, wich is the same on the other thred.
This one is a 'copy n paste' from the other post.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=27003897&postcount=5
Was asked, and he got pointed to the 120 thread....
---------- Post added at 02:27 PM ---------- Previous post was at 01:51 PM ----------
I had come from 145 secure to EU latest and could not restore MMCblk18 due to cdrom change, cant downgrade to gb cdrom after going to 145 chinese.
I found the solution though, erase cid, root eu,
dd gb cdrom
dd if=/sdcard-ext/cdrom.img of=/dev/block/mmcblk1p16
restore cid
cat /mnt/sdcard-ext/mmcblk1p18-back> /dev/block/mmcblk1p18
No longer have customer ID error
Please Note: I take no responsibility for any of the commands above, I used them but I knew what I was doing and had the right files.
FrAsErTaG said:
http://forum.xda-developers.com/showpost.php?p=27003897&postcount=5
Was asked, and he got pointed to the 120 thread....
---------- Post added at 02:27 PM ---------- Previous post was at 01:51 PM ----------
I had come from 145 secure to EU latest and could not restore MMCblk18 due to cdrom change, cant downgrade to gb cdrom after going to 145 chinese.
I found the solution though, erase cid, root eu,
dd gb cdrom
dd if=/sdcard-ext/cdrom.img of=/dev/block/mmcblk1p16
restore cid
cat /mnt/sdcard-ext/mmcblk1p18-back> /dev/block/mmcblk1p18
No longer have customer ID error
Please Note: I take no responsibility for any of the commands above, I used them but I knew what I was doing and had the right files.
Click to expand...
Click to collapse
how to root ics china leak 145???
FrAsErTaG said:
http://forum.xda-developers.com/showpost.php?p=27003897&postcount=5
Was asked, and he got pointed to the 120 thread....
---------- Post added at 02:27 PM ---------- Previous post was at 01:51 PM ----------
I had come from 145 secure to EU latest and could not restore MMCblk18 due to cdrom change, cant downgrade to gb cdrom after going to 145 chinese.
I found the solution though, erase cid, root eu,
dd gb cdrom
dd if=/sdcard-ext/cdrom.img of=/dev/block/mmcblk1p16
restore cid
cat /mnt/sdcard-ext/mmcblk1p18-back> /dev/block/mmcblk1p18
No longer have customer ID error
Please Note: I take no responsibility for any of the commands above, I used them but I knew what I was doing and had the right files.
Click to expand...
Click to collapse
Now this is interesting...
Are you saying that you're on 145 and no longer have customer ID error??
EDIT
nevermind, mis-read
But how did you jump from 145 to EU latest?
Sent from my XT910 using Tapatalk 2
farhanito said:
Now this is interesting...
Are you saying that you're on 145 and no longer have customer ID error??
EDIT
nevermind, mis-read
But how did you jump from 145 to EU latest?
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You need to take backup of your mmcblk1p18, or already have one
its a long process
fastboot flashed allow-mbmloader-flashing-mbm.bin (local region gb)
fastboot erase cid
fastboot flashed ebr (local region gb)
fasboot flashed mbr (local region gb)
fastboot flashed recovery (EU 4.04)
fastboot flashed boot (EU 4.04)
fastboot flashed system (GB M2-3)
reboot into recovery, flash latest EU leak
boot into rom, enable adb
root with my root package that is modified to with VRZ 4.03 boot and EU 4.04 boot
DD cdrom (gb) to /dev/block/mmcblk1p16
cat /mnt/sdcard-ext/mmcblk1p18-back> /dev/block/mmcblk1p18
I do not recommend you do this if you dont understand it...
Disclaimer: I take no responsibility with these commands being entered by anyone reading them. It worked for me, not claiming it will work for you.
Click to expand...
Click to collapse
thanks a lot
just to make things a bit clearer, where do we get these files? from the OTA update package?
FrAsErTaG said:
fastboot flashed recovery (EU 4.04)
fastboot flashed boot (EU 4.04)
I do not recommend you do this if you dont understand it...
Click to expand...
Click to collapse
Related
welcome
theis is an rom fix ota XT910.PSHAsiaRetail.en.03
work update
Not failed update System version :65.1.21.XT910
work root 65.1.21.XT910
work Recovery 65.1.21.XT910
http://www.zshare.net/download/98558031af3cbd8f/
http://www.multiupload.com/8XIEU8V4QY
Warning
Recovery delete all data
Installation:
1-Razr Bootstrap backup data
2-Copy the Razer Asia Recovery.zip to your Sdcard
3-Razr Bootstrap Recovery
4-Install zip from Sdcard
5-Flash
6- install from market voodoo OTA rootkeeper
7- use it to backup the root
8- update the OTA 65.1.21.XT910
9- use voodoo OTA rootkeeper again to restore root
10- reboot
Hi,
Just want to check with you on this recovery. I am on 65.1.21.XT910.PSHAsiaRetail.en.03
1) I want to root my phone, but afraid I might encounter bootloop. Will this recovery help to recover from it?
2) Do i need root before I can use this recovery?
3) Your instructions doesn't look clear to me(Im a noob). Do I follow exactly as you said?
Sorry if these questions have been asked before. Im a noob when it comes to this phone. Was using S2 before this, and was very easy to root. Even if the phone goes into bootloop, very easy to recover.
Please show me some light....
almstag said:
welcome
theis is an rom fix ota XT910.PSHAsiaRetail.en.03
work update
Not failed update System version :65.1.21.XT910
work root
work Recovery
http://www.zshare.net/download/98558031af3cbd8f/
Warning
Recovery delete all data
Installation:
1-Razr Bootstrap backup data
2-Copy the Razer Asia Recovery.zip to your Sdcard
3-Razr Bootstrap Recovery
4-Install zip from Sdcard
5-Flash
6- install from market voodoo OTA rootkeeper
7- use it to backup the root
8- update the OTA 65.1.21.XT910
9- use voodoo OTA rootkeeper again to restore root
10- reboot
Click to expand...
Click to collapse
Yes the root before recovery
Some one please upload this ROM to mediafire. Its impossible to download from zShare. The download speeds are really really low.
Please post the languages this rom have.
from the last 20 minutes, it got stuck on that motorola logo.
oouuchh... no success after step 5 atleast from my side.
~BSOD~ said:
from the last 20 minutes, it got stuck on that motorola logo.
oouuchh... no success after step 5 atleast from my side.
Click to expand...
Click to collapse
download rsd lite and the fastboot files
http://www.filesonic.com/file/41827...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
almstag said:
download rsd lite and the fastboot files
http://www.filesonic.com/file/41827...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
Click to expand...
Click to collapse
yup thats what i am doing now, already on 50% download.
will post the final output and fate of my razr after that.
so finally on 651.73.30.xt910.retail.en.EU and yup its really fast and zippy from my original asia one
~BSOD~ said:
so finally on 651.73.30.xt910.retail.en.EU and yup its really fast and zippy from my original asia one
Click to expand...
Click to collapse
Do you mean your phone is original on 65.1.21.XT910.PSHAsiaRetail.en.03, now you use RSD Lite and flash the original fastboot of Europe region ?
It will mean that XT910 can flash any original room version, rite ?
Tks
quang_nguyen said:
Do you mean your phone is original on 65.1.21.XT910.PSHAsiaRetail.en.03, now you use RSD Lite and flash the original fastboot of Europe region ?
It will mean that XT910 can flash any original room version, rite ?
Tks
Click to expand...
Click to collapse
yup. you can.
(ps: even i'm thinking of trying verizon/cdma version atleast once )
~BSOD~ said:
yup. you can.
(ps: even i'm thinking of trying verizon/cdma version atleast once )
Click to expand...
Click to collapse
Really, without any hack steps, you can flash the different original rom ?
Sorry for asking again because when I ask Moto service in Vietnam, they said they can not flash the original rom (for Vietnam market) to my phone (bought in Sing) because they said it can cause a brick, although as my assumption, Vietnam and Sing will use the same rom version (Asia rom). hic
Tks
quang_nguyen said:
Really, without any hack steps, you can flash the different original rom ?
Sorry for asking again because when I ask Moto service in Vietnam, they said they can not flash the original rom (for Vietnam market) to my phone (bought in Sing) because they said it can cause a brick, although as my assumption, Vietnam and Sing will use the same rom version (Asia rom). hic
Tks
Click to expand...
Click to collapse
just being a regular guy with always being a tester not a developer, i cannot assure you that whether this is possible theoretically, practically,company-cally P) or not. what i know from my past experience and being a lab rat as tester is that do what ever you can do whenever you stuck at such a situation.
I didn't thought there before reflashing this out, that whether this works or not, but boom finally i am here with my RAZR back from ICU.
yup definately it works for me, and i can help you any time you you too want so*.
*Strictly "Do at your own risks" applies.
Aashrey99 said:
Some one please upload this ROM to mediafire. Its impossible to download from zShare. The download speeds are really really low.
Click to expand...
Click to collapse
mediafire
part1
http://www.mediafire.com/?6yu5w336v6nww6n
part2
http://www.mediafire.com/?nhmr4j71g1ooque
part3
http://www.mediafire.com/?8mzkuyjoodlldca
Thanks alm!
Gonna try this now!
great work man thanks
Hmm, this whole thing is getting me confused, hahaha.
Ok let me get this straight, I can attempt root and other funny stuff on my phone? And if i get stuck or bootloops, I just have to flash this file and all goes back to normal?
Where do I find the EU orig ROM, and how to install it? Abit lost here....
~BSOD~ said:
yup. you can.
(ps: even i'm thinking of trying verizon/cdma version atleast once )
Click to expand...
Click to collapse
~BSOD~ said:
so finally on 651.73.30.xt910.retail.en.EU and yup its really fast and zippy from my original asia one
Click to expand...
Click to collapse
That's means your RAZR has been changed to EU like me!!!!
My question is....did you flash the OTA file from this thread on to your EU ROM(Fastboot file) and it is possible to flash it on to EU?????
Because I need to change my phone back to Asia. If you know about any solution to turn back to Asia please tell me...... Because I can't find the Fastboot file for AsiaRetail ever.
cravvler said:
Hmm, this whole thing is getting me confused, hahaha.
Ok let me get this straight, I can attempt root and other funny stuff on my phone? And if i get stuck or bootloops, I just have to flash this file and all goes back to normal?
Where do I find the EU orig ROM, and how to install it? Abit lost here....
Click to expand...
Click to collapse
atleast this is what that worked for me. After the leaked fastboot files(even not of Asian version) i started pinching and tweaking my razr, as i can go down back to original stock version anytime(atleast most of the times ), i am even now in move to make my own Motorola FactoryCable as worst case scenario
And here goes the link for EU stock rom
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
Rom EU :
- Android Version : 2.3.5
- Rootable : YES
- Build Date : 07/12/2011
- System Version : 651.73.30.XT910.Retail.en.EU
- SPU : SPU-11 M1-2
- Radio : U_03.1C.85P
- Bootloader Version : 0A.65
- Webtop Version : WT-2.0.0-113
- AnTuTu Benchmark : 6000
Ask me for any help you need(at your own risk only) and i m ready to help you in this.
If this helps you in any sense, then please hit thanks button for me first time.
---------- Post added at 10:05 PM ---------- Previous post was at 09:52 PM ----------
kayak said:
That's means your RAZR has been changed to EU like me!!!!
My question is....did you flash the OTA file from this thread on to your EU ROM(Fastboot file) and it is possible to flash it on to EU?????
Because I need to change my phone back to Asia. If you know about any solution to turn back to Asia please tell me...... Because I can't find the Fastboot file for AsiaRetail ever.
Click to expand...
Click to collapse
please specify the OTA about whom you are talking about. And if you are talking about 651.150.1 for EU over my 651.73.30 EU ROM, then no, coz its not possible to update that on .30 (its only for .17 & .18 ROM only).
And about changing it back to Asian version, no there is no fastboot file till now here for asian version. And i think i can go back to my Asian version coz i backed up my asian version before flashing this(didn't tried it to restore yet ).
~BSOD~ said:
And about changing it back to Asian version, no there is no fastboot file till now here for asian version. And i think i can go back to my Asian version coz i backed up my asian version before flashing this(didn't tried it to restore yet ).
Click to expand...
Click to collapse
Hi, I am new here. I just flashed my Razr to EU rom, and im abit screwed, i didnt backed up my rom before flashing (noob ) where is your phone from? SingTel? i am looking for 'asia backup stock rom' so i can flash it back to stock again. it is possible right?
Thanks,
651.167.3331.xt910.FIDO.en.CA
ignore the filename it is the update
flash over stock fido rom!
wont flash over rogers rom for some odd reason.
http://www.2shared.com/file/W6zVGhX3/Blur_Version65173240XT910Fidoe.html
gunness1991 said:
Fido ROM, might be of some use. just found it on my phone lol.
http://www.2shared.com/file/W6zVGhX3/Blur_Version65173240XT910Fidoe.html
Click to expand...
Click to collapse
Well, this actually is OTA update, dude, and its verson is as follows:
651.167.3331.xt910.Rogers.en.CA. Am I wrong?
Cannot install this on my Rogers device BTW
theZest said:
Well, this actually is OTA update, dude, and its verson is as follows:
651.167.3331.xt910.Rogers.en.CA. Am I wrong?
Cannot install this on my Rogers device BTW
Click to expand...
Click to collapse
Why not? Can't you nandroid stock rom 'em flash recovery this?
Sent from my XT910 using Tapatalk 2
I've got 2 explanation (in my opinion):
1) Fido Rom differs from Rogers' one (I will highly appreciate if smb explain what is Fido )
2) Argentina firmware with manually restored (via nandroid) Rogers Rom.
Installation itself ends with the following message:
Code:
E:unknown command [un_configure]
assert failed: file_getprop("/system
/build.prop", "ro.build.fingerprint"
) == "MOTO/FDOCA/umts_spyder:2.3.5/6
5.1_73_SLC-24/1322150184:user/relea
se-keys" || file_getprop("/sys
tem/build.prop", "ro.build.fingerpri
nt") == "MOTO/FDOCA/umts_spyder:2.3.
6/6.5.1-167_SLC-M33.1/1330125235.173
241:user/release-keys"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted
Will PM you my Gtalk
theZest said:
I've got 2 explanation (in my opinion):
1) Fido Rom differs from Rogers' one (I will highly appreciate if smb explain what is Fido )
2) Argentina firmware with manually restored (via nandroid) Rogers Rom.
Installation itself ends with the following message:
Code:
E:unknown command [un_configure]
assert failed: file_getprop("/system
/build.prop", "ro.build.fingerprint"
) == "MOTO/FDOCA/umts_spyder:2.3.5/6
5.1_73_SLC-24/1322150184:user/relea
se-keys" || file_getprop("/sys
tem/build.prop", "ro.build.fingerpri
nt") == "MOTO/FDOCA/umts_spyder:2.3.
6/6.5.1-167_SLC-M33.1/1330125235.173
241:user/release-keys"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
Lol... U can't use a ota update from other carrier... At least not that way:banghead:
Enviado desde mi XT910 usando Tapatalk 2
theZest said:
Well, this actually is OTA update, dude, and its verson is as follows:
651.167.3331.xt910.Rogers.en.CA. Am I wrong?
Cannot install this on my Rogers device BTW
Click to expand...
Click to collapse
yeah youre right lol my mistake ill change the thread title
its the FIDO OTA to .3331
gunness1991 said:
yeah youre right lol my mistake ill change the thread title
its the FIDO OTA to .3331
Click to expand...
Click to collapse
It can't be done. Only with an original fido razr firmware, what doesn't exist.
pedrotorresfilho said:
It can't be done. Only with an original fido razr firmware, what doesn't exist.
Click to expand...
Click to collapse
what cant be done?
i have a fido phone and flashed this update perfectly fine.
gunness1991 said:
what cant be done?
i have a fido phone and flashed this update perfectly fine.
Click to expand...
Click to collapse
Read again.... You will find out.
Enviado desde mi XT910 usando Tapatalk 2
leisures said:
Read again.... You will find out.
Enviado desde mi XT910 usando Tapatalk 2
Click to expand...
Click to collapse
im in the dark here.
gunness1991 said:
im in the dark here.
Click to expand...
Click to collapse
it says, can only be done on Fido ROM.
u cant use this OTA with any other ROM. that's what pedro meant to say. that's why it works for u. and that's why it doesn't work on some other posters here that's not on FIDO.
(ps: to our non-Canadian friends: Fido is a carrier. like Rogers. like ATT. like T-Mobile. etc...)
---------- Post added at 01:46 PM ---------- Previous post was at 01:46 PM ----------
pedrotorresfilho said:
It can't be done. Only with an original fido razr firmware, what doesn't exist.
Click to expand...
Click to collapse
btw, it exists. http://forum.xda-developers.com/showthread.php?t=1469625
That dosent helps at all... Its a nandroid, only system folder u will get, no kernel, no webtop or ether radio.
Enviado desde mi XT910 usando Tapatalk 2
Seems with this update fido changed there signature. cause i bricked my phone just to do a test. and wasnt able to restore it with any latam rom ( usually i can do it with 5 Latam Stock roms ) till i mixed some file from fido build to latam sbf.
lets hope that its compatible with eurpean rom.
Any1 got the same prob?
Yorgo i bricked mine too however i restored it by flashing retail.br fastboot using fla****(alternative by eternityteam) instead of rsdlite. It will bypass signature verification and you'll have a working phone again. Make sure you do a factory wipe from motorola recovery after flashing otherwise it wont boot.
To flash just unzip all the files from the fastboot and place them in the fla**** folder. After that run fla****.exe or w/e it is and let it work its magic.
Same problem we had before in the other thread discussing this: no fastboot file for Rogers or fido. This makes it impossible to update if you've ever fastbooted anything in your phone, ever, or if you aren't from Canada. I'm going to just accept that we aren't getting this or any other ota and move on.
Sent from my miui xt910
evonc said:
Yorgo i bricked mine too however i restored it by flashing retail.br fastboot using fla****(alternative by eternityteam) instead of rsdlite. It will bypass signature verification and you'll have a working phone again. Make sure you do a factory wipe from motorola recovery after flashing otherwise it wont boot.
To flash just unzip all the files from the fastboot and place them in the fla**** folder. After that run fla****.exe or w/e it is and let it work its magic.
Click to expand...
Click to collapse
My phone is already working ( thanks ) but i had to mix some files from fido 3331 in the Latam. it wont flash if i dont use the sbf that i made. i thought that they changed there signature. but not the case. ( i tried more than 8 versions of Rom ) none flashed. i guess when i updated the phone it didnt allow me to downgrade so thats why i had to mix Fido rom ( update ) with Latam . but now the prob i can't update my fido cellphone even with the stock nandroid. was u able to update yours? honestly its not a big deal for me cause i use a middle eastern nandroid for arabic. but official ics wont work if u dont go 1rst on the 2.3.6 even as a nandroid
---------- Post added at 05:09 AM ---------- Previous post was at 05:03 AM ----------
xxBrun0xx said:
Same problem we had before in the other thread discussing this: no fastboot file for Rogers or fido. This makes it impossible to update if you've ever fastbooted anything in your phone, ever, or if you aren't from Canada. I'm going to just accept that we aren't getting this or any other ota and move on.
Sent from my miui xt910
Click to expand...
Click to collapse
thats ok i dont care for North american rom. i will have to wait for Latam to update there rom ( just to have the right kernel ) and will go back as usual for my middle eastern nandroid 2.3.6, the reason why i want the update is when in the middle east they get the ICS ( it arrive b4 canada ) i will be able to bypass the restore and it wont stuck on bootloader, thanks god i have a factory active cable so brick unbrick and rebrick lol
I'm really hoping you're right and we'll see a Vivo update soon, since that's a stock rom anyone can hop onto. I also hope you can sideload updates without having specific carriers. Considering Rogers and Fido will both gladly unlock your phone for you, I think requiring the correct carrier to receive updates is pretty backwards.
xxBrun0xx said:
I'm really hoping you're right and we'll see a Vivo update soon, since that's a stock rom anyone can hop onto. I also hope you can sideload updates without having specific carriers. Considering Rogers and Fido will both gladly unlock your phone for you, I think requiring the correct carrier to receive updates is pretty backwards.
Click to expand...
Click to collapse
did you tried to bypass ur phone with the new way?
i did it and i have now a middle eastern stock rom 2.3.6 on my phone give it a try
Hey guys
Here's the rogers/fido rsd lite update for razr.
It's the 2.3.6
http://forum.xda-developers.com/showthread.php?t=1624352
Cheers
Sent from my XT910 using Tapatalk 2
Hello, world!
-- This is only for Chinese Razrs. It won't work in any other versions of this device.
What do we have here?
This is Official Chinese Ice Cream Sandwich 4.0.4 fastboot file to Motorola Razr XT910 to be flashed with RSD Lite.
Sytem Info
Branding: RETAIL en.CN
Market Segment: China Retail
Version: 67.145.10
Android Version: 4.0.4
SPDU: 10-94
ROM Type: Full Flash
Radio Version: 04.09.03P
Bootloader Version: 0A.75
WebTop Version: WT-3.0.0
Downgradeable to GB: No.
- - PLEASE READ CAREFULLY THE ENTIRE THREAD - -
Notes:
- 1 - Before flashing the bellow system is wise to do a Factory Reset and Erase Internal Memory.
- 2 - Make sure you get a PASS message at the end of RSD Lite.
- 3 - If you want CWM on ICS: Use the RazrICSBootstrap (who made this work: Thank you!)
- 4 - Use Motorola Device Manager to get root.
Needed files:
a. EternityProject EasyROOTICS
b. RSD Lite 5.7
c. Get the Fastboot package of this ROM
----> Please, respect us! Do not post direct download links and do not reupload this file on other filehosters. If you want to share it, redirect to this thread! <----
How-To:
1. Install RSD Lite
2. Decompress the package
3. Open the XML file with RSD Lite
4. Connect your RAZR
5. Flash...
6. Enjoy!
*AFTER UPGRADING TO ICS YOU'LL NOT BE ABLE TO DOWNGRADE TO GB 2.3.6.*
FLASHING THIS ROM WILL ERASE ALL YOUR DATA, MAKE A BACKUP
Liked it? Press thanks button. You can also Buy me a Cold Beer!
Thanks to EternityProject for hosting the file and support
Thanks kholk
And all the guys sharing experiences and knowledge @XDA
What about the CID partition? I guess we need to wipe it to be able to flash it on EU Razr or any other region?
dtrail1 said:
What about the CID partition? I guess we need to wipe it to be able to flash it on EU Razr or any other region?
Click to expand...
Click to collapse
Yup. For another regions Razr will be the exact same block 18 trick as in the previous leaks.
dtrail1 said:
What about the CID partition? I guess we need to wipe it to be able to flash it on EU Razr or any other region?
Click to expand...
Click to collapse
Probably yes, but you can still mount system.img as a partition, do nandroid backup and restore as a second system.
Edit: It's same version as OTA Leak, already got it
OKay, I'm tired of waiting. R u sure this is the final version or is this one more "leak"? If its the final leak, then i'll flash. I'm on AsiaRetail. N I'm assuming I'll be able to flash my AsiaRetail fastboot file once that comes out?
Also, after i finish the installation, is the lang eng or chinese? Coz I dunno chinese at all, so how do I navigate around to changing the lang if its not already set to eng.
How to find a leak file? Anyone?
whirleyes said:
How to find a leak file? Anyone?
Click to expand...
Click to collapse
PM @whirleyes we may find a way to work on it. And nice job on lenses. You rock!
BTW, Me and theZest we have a port request from this chinese SO, can you help us?
Cheers
cheekrox said:
OKay, I'm tired of waiting. R u sure this is the final version or is this one more "leak"? If its the final leak, then i'll flash. I'm on AsiaRetail. N I'm assuming I'll be able to flash my AsiaRetail fastboot file once that comes out?
Also, after i finish the installation, is the lang eng or chinese? Coz I dunno chinese at all, so how do I navigate around to changing the lang if its not already set to eng.
Click to expand...
Click to collapse
Yes, it's the final release leaked. I think Asia retail shares same region signature as europe. Don't flash it if your razr is Asia. Both, english and chinese.
Cheers
lukas77 said:
Probably yes, but you can still mount system.img as a partition, do nandroid backup and restore as a second system.
Edit: It's same version as OTA Leak, already got it
Click to expand...
Click to collapse
Lukas77, I'm not sure I understand your method (NVM, got it). Oh! And the OTA is broke did you noticed? Also, this fastboot is 1Gb.
Cheers
So ur asking me not to flash it? I was kinda getting ready to flash it. Hmm...I know its both Eng n Chinese, but what I'm saying is...by default...in the first screen...is it Eng or Chinese?
Also, the fast boot is 300MB ? coz that's what the DL link says.
Langs?
Block18
pedrotorresfilho said:
Yup. For another regions Razr will be the exact same block 18 trick as in the previous leaks.
Click to expand...
Click to collapse
has anyone tried if motorola has made a few routines to fix the block 18 damage or empty ?
My Razr is in the repair center.
Bye
Linusmax
Can i flash this without the block method? Cause i am at China leak 67.2.120
IS this any better then the rom I have now? [Stock][GSM][Latam][Razr][XT910] Ice Cream Sandwich 4.0.4 [OTA]
Can I flash over it?
another link http://115.com/file/dpa2dtcv
cheekrox said:
So ur asking me not to flash it? I was kinda getting ready to flash it. Hmm...I know its both Eng n Chinese, but what I'm saying is...by default...in the first screen...is it Eng or Chinese?
Also, the fast boot is 300MB ? coz that's what the DL link says.
Click to expand...
Click to collapse
First one is chinese, but you can change it the first screen.
it's a 1Gb file, but it's safely compressed to ~300mb.
Cheers
core720 said:
Langs?
Click to expand...
Click to collapse
Just English/Chinese.
Cheers
linusmax said:
has anyone tried if motorola has made a few routines to fix the block 18 damage or empty ?
My Razr is in the repair center.
Bye
Linusmax
Click to expand...
Click to collapse
Not in this version. Hope you get yours soon.
Cheers
fikri95 said:
Can i flash this without the block method? Cause i am at China leak 67.2.120
Click to expand...
Click to collapse
Well, if you are in the chinese .120 leak without the block trick you can flash. But you have a .CN razr right?
ottawadad34 said:
IS this any better then the rom I have now? [Stock][GSM][Latam][Razr][XT910] Ice Cream Sandwich 4.0.4 [OTA]
Can I flash over it?
Click to expand...
Click to collapse
Absolutely yes! Our rom have bugs and a lot of features wich is not built in like call n sound recorder, firewall for blocking call from non vip contacts, and a lot more. Hope we get an update to our version soon or will worth move to chinese ics.
NO. You can't flash over retail.br. Sorry
whirleyes said:
another link http://115.com/file/dpa2dtcv
Click to expand...
Click to collapse
Oh! Nice!.. Checked its speed and it's really bad. Anyway, it's the same version and it's on a faster server.
Cheers
pedrotorresfilho said:
Oh! Nice!.. Checked its speed and it's really bad. Anyway, it's the same version and it's on a faster server.
Click to expand...
Click to collapse
I don't have an account with http://www.eternityproject.eu/ to view link.. I'm lazy too register...
Google gave me that link
So, do I or do I not flash this over AsiaRetail?
@pedro i am not on .CN RAZR..so how?
fikri95 said:
@pedro i am not on .CN RAZR..so how?
Click to expand...
Click to collapse
Its a fastboot, so u can just flash using RSD. The issue is signatures, I believe. Which is why I need pedro to confirm if its okay to flash on AsiaRetail and Canada.
If i flash but some features like keyboard or data not working??how?
fikri95 said:
If i flash but some features like keyboard or data not working??how?
Click to expand...
Click to collapse
NOT working? Wow, thats weird. This is a final release, hmm...have u entered ur APN?
02/10/2012 - UPDATED WITH MORE REGIONS!
Final ICS firmwares:
Retail British
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
Retail Central Europe (NonEFIGS)
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot.xml.zip
Retail French
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTFR_HWp2b_Service1FF_fastboot.xml.zip
SFR France
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSVFFR_HWp2b_Service1FF_fastboot.xml.zip
O2 Germany
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSO2DE_HWp2b_Service1FF_fastboot.xml.zip
TIM Italy
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSTIMIT_HWp2b_Service1FF_fastboot.xml.zip
Bootloader: 0A.74
DL: http://sbf.droid-developers.org/umts_spyder/list.php
Note: The previous leaked build was SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2.
"FIRMWARE TEAM"
Excellent
Is this retail or nonefigs?
^ Retail.
Downloading now and will flash.
adaimespechip said:
^ Retail.
Downloading now and will flash.
Click to expand...
Click to collapse
let us know if this updates the Bootloader
much thanks
Sure.
I'm currently on the 672.180.33 leak so there shouldn't be a huge difference. Will report back.
Bootloader should be 0A.74.
Hi
is there a pre-requisite ROM version when flashing this via RSD ?
(asking as I'm on ICS 676.226.3 )
thanks
altus said:
Hi
is there a pre-requisite ROM version when flashing this via RSD ?
(asking as I'm on ICS 676.226.3 )
thanks
Click to expand...
Click to collapse
the size of the file indicates its a full SBF. You should have no problems flashing with RSD
Skrilax_CZ said:
Bootloader should be 0A.74.
Click to expand...
Click to collapse
Which would be good
jessel0001 said:
the size of the file indicates its a full SBF. You should have no problems flashing with RSD
Which would be good
Click to expand...
Click to collapse
Does this remove webtop partition or leave it empty?
Stil trying to download the sbf. Cray slow right now.
Skrilax_CZ said:
Bootloader should be 0A.74.
Click to expand...
Click to collapse
Yes, full sbf contain Bootloader 0A.74, however it is not flashed by RSD.
lukas77 said:
Does this remove webtop partition or leave it empty?
Click to expand...
Click to collapse
There is no webtop image in the sbf and and there is no any command in XML to touch webtop partition during flashing
Al936 said:
Yes, full sbf contain Bootloader 0A.74, however it is not flashed by RSD.
Click to expand...
Click to collapse
What do you mean? I'm downloading SPDREM_U_01.6.5.1-73_SPU-11-PASS-10_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
This can be flashed by RSD, right?
adaimespechip said:
What do you mean? I'm downloading SPDREM_U_01.6.5.1-73_SPU-11-PASS-10_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
This can be flashed by RSD, right?
Click to expand...
Click to collapse
I think he means the bootloader is contained in the image but not flashed, so RSD should still be good to go.
jessel0001 said:
the size of the file indicates its a full SBF. You should have no problems flashing with RSD
Click to expand...
Click to collapse
Thanks !
Any improvements?
Sent from my XT910 using xda app-developers app
which fastboot recommend to instal in my razr??
i´m from portugal and the phone has purchase in germany unlocked.
perhaps this SPDREM_U_01.6.5.1-73_SPU-11-M1-2_SIGNEuropeAustraliaEMEA_USASPDRRTCEE_HWp2b_Service1FF_fastboot.xml.zip?
thanks
Okay so, this seems to be failing at the first step:
Failed flashing process. 1/11 flash cdt.bin ''cdt.bin_signe'' -> Phone returned FAIL
Any ideas?
---------- Post added at 12:16 PM ---------- Previous post was at 12:08 PM ----------
Also - I now have flash failure.. brilliant!
for now flash the old sbf file of the .33 so you can charge it and don't have a huge pricey brick
Need to find and download it first! Luckily the device has full charge and is now off..
Edit: found it, SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
http://www.multiupload.nl/WSIVWXFXZ9
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-381-398-release-keys-ChinaRetail-CN_chn.tar.gz
Use the RSD lite or FLA****.BAT
No cdt upgrade
Downgrade CONFIRMED!
Easy root package for China retail 4.1.2
Fix Internal Storage (for users that are told to format there internal memory)
Enjoy
have you flashed this on your xt910?
who already tried this?
and what is it, cdt.bin?
Sisqo said:
have you flashed this on your xt910?
Click to expand...
Click to collapse
China Retail ONLY
EU / ASIA need to use the p18 trick AND use an old CDT.BIN
shiwuye12 said:
http://www.multiupload.nl/WSIVWXFXZ9
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-381-398-release-keys-ChinaRetail-CN_chn.tar.gz
Use the RSD lite or FLA****.BAT
Warning:
The CDT may up to 5 or 6
SO please use a 4.0.4 CDT.BIN to replace the new one!
Click to expand...
Click to collapse
Can you make nandroid backup?
St33l said:
who already tried this?
and what is it, cdt.bin?
Click to expand...
Click to collapse
CDT.BIN can be extracted from any old 4.0.4 fastboot file
Use the old one to replace the new one
artur0588 said:
Can you make nandroid backup?
Click to expand...
Click to collapse
No need to do it .
Because the system.img from inside can be easy to be flashed from fastboot.
shiwuye12 said:
No need to do it .
Because the system.img from inside can be easy to be flashed from fastboot.
Click to expand...
Click to collapse
How about kernel? I am recently running on verizon JB kernel with erased CID.
EDIT: kernel size seems same with the one from OTA verizon JB.
hope whirleyes will be on this soon
artur0588 said:
How about kernel? I am recently running on verizon JB kernel with erased CID.
EDIT: kernel size seems same with the one from OTA verizon JB.
Click to expand...
Click to collapse
Use fastboot to flash boot.img and it's OK .
Remember:
DO NOT FLASH THE NEW CDT.BIN !
OR YOU MAY CANNOT DOWNGRADE OR ROOT !
So U.S.A. got jb, China got jb, hope EU will receive soon.
Sent from my MOTOROLA RAZR using xda premium
Where does this came from...?
arnesottolo said:
Where does this came from...?
Click to expand...
Click to collapse
See the title and the OP
what is the p18 trick?
More language are available?
Sent from my XT910 using xda app-developers app
shiwuye12 said:
See the title and the OP
Click to expand...
Click to collapse
Sorry, what I meant was: it's an OTA or grabbed from where?
Jack'O said:
So U.S.A. got jb, China got jb, hope EU will receive soon.
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
yes hopefully we see a leak for eu in the coming weeks..
shiwuye12 said:
Use fastboot to flash boot.img and it's OK .
Remember:
DO NOT FLASH THE NEW CDT.BIN !
OR YOU MAY CANNOT DOWNGRADE OR ROOT !
Click to expand...
Click to collapse
I flashed system and kernel. Everything running as must be but how to get root. Before flash i backup root with Ota root keeper but now can not restore, any other way?
Nizen054 said:
what is the p18 trick?
Click to expand...
Click to collapse
If i'm not wrong it mean to erase the cid. Or to replace it "dd if=/sdcard/cid.img of=/dev/block/mmcblk1p18"
artur0588 said:
I flashed system and kernel. Everything running as must be but how to get root. Before flash i backup root with Ota root keeper but now can not restore, any other way?
Click to expand...
Click to collapse
This is a FASTBOOT not an OTA
Maybe this helps:
You can try to open the USB DEBUGGING and install an 4.0.4 kernel
Then the phone can be black screen but you can root as usual
At last flash the new kernel from fastboot
Profit!
EDIT:
Tested by chinese users : Success!