Hi everyone.
Ive had my phone rooted for a while and ive been flashing allsorts over the past few months (kernels,roms,mods...)
I had the yellow triangle on boot when I first flashed the CFroot kernel (like everyone does)...
But somewhere along the line id managed to keep my phone rooted and somehow remove the triangle!
No matter what I flashed the triangle was still gone...
Unfortunatly today I had to 'ODIN' flash my stock rom again cuz all my backups were saying 'md5 mismatch' and thus the warning symbol appears when i root my phone again...
Does anyone know how I can root my phone and keep that triangle away? Without using the Triangle away app...
Thanks
Sent from my GT-I9100 using xda premium
Try using triangle away if youre using ICS, search for it. or flash a stock kernel that matches your firmware
match_stick said:
Hi everyone.
Does anyone know how I can root my phone and keep that triangle away? Without using the Triangle away app...
Thanks
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Have a look at this thread, post 2 will tell you how to remove the yellow triangle then return CWM to full working order. If you flashed using chainfires CF root this will sort it for you.
http://forum.xda-developers.com/showthread.php?t=1103399
You will need the stock kernel from this post that fits your phone so make sure you download the correct one
http://forum.xda-developers.com/showthread.php?t=1075278
match_stick said:
Does anyone know how I can root my phone and keep that triangle away? Without using the Triangle away app...
Click to expand...
Click to collapse
Sent from my GT-I9100 using xda premium
Maybe this will work
match_stick said:
match_stick said:
Does anyone know how I can root my phone and keep that triangle away? Without using the Triangle away app...
Click to expand...
Click to collapse
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try re-reading post 3, which is right above yours.
If you care to learn... the triangle is a visual indicator that a kernel that was NOT signed by Samsung is currently flashed to your phone.
So you can root your phone by flashing a CF-root kernel (linked in post 3), then re-flash a stock Samsung signed kernel (also in that post) to remove the triangle, and you will retain root. (That will NOT, however, remove the flash count. But you didn't ask about that...)
if u use a GB Rom u cand remove with ISB JIG,but before install with ODIN an old BOOTLOADER. i.m not sure if USB JIG work on ICS. u can give a try.enjoy.
enigmatyq said:
if u use a GB Rom u cand remove with ISB JIG,but before install with ODIN an old BOOTLOADER. i.m not sure if USB JIG work on ICS. u can give a try.enjoy.
Click to expand...
Click to collapse
It CAN... but only if you are running the old bootloader. The old bootloader still works with ICS.
ctomgee said:
It CAN... but only if you are running the old bootloader. The old bootloader still works with ICS.
Click to expand...
Click to collapse
well i use USB only in GB ROM,now is for sale on ebay )
@match_stick : now only thing is to get an USB JIG, and type on google : i9100 old bootloader,download and flash with odin.first,search on youtube: how to use USB JIG on i9100 . good luck
What you ask is simple and that is what you must have done....
Flash the official kernel back after cfroot, it removes the triangle.
But remember, the counter stays that's why people use jig, triangle away.
Thanks everyone. I think I must have flashed a secure kernel again at some point thats probably why I had No triangle. ...
But i was using Siyah for a while...no triangle.
Sent from my GT-I9100 using xda premium
match_stick said:
Thanks everyone. I think I must have flashed a secure kernel again at some point thats probably why I had No triangle. ...
But i was using Siyah for a while...no triangle.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
If you had flashed Siyah with a method OTHER than Odin, then it would not show the triangle.
The triangle (and by extension, the count) only registers non-Samsung signed kernel flashes that are done via Odin. Sorry, I forgot to mention that before.
you can use a usb jig if you have access to it
Its better if u use triangle away....just make sure ur already using ICS rom...
cheers !
Flash stock firmware from sammobile.com
Sent from my GT-P7510 using xda premium
Related
Hi,
I own a Samsung Galaxy S2/ GT-I9000
Android: 2.3.3
Baseband: I9100XXKDJ
Kernel Version: 2.6.35.7-I9100XWKDD-CL161513
[email protected] #2
I wanted to root the phone and i have followed this thread to the letter: [Guide] And then there was ROOT.
So i did everything;
-I flashed the kernel (XWKDD) succesfully.
-Phone reboots.
-Opening SuperOneClick; pressing ROOT. (phone still connected)
...And then it just does nothing.
It hangs @: Waiting for device.
As soon as I try to click something, like minimize window, it stops responding.
My device is in debugging-mode (as required for ODIN, reboot -> Still debug, so that's not the problem).
I'm really out of answers..
I don't know how to get it working..
Remember, i followed everything by the letter..
Until the root-part with superoneclick... It just won't let me...
Anyone got any answers?
Sent from my GT-I9100 using XDA App
Did you install Kies for the USB drivers?
Yes I did. I even tried Samsung PCSuite plus downloading drivers manually!
All is up-to-date.
Sent from my GT-I9100 using XDA App
firstly the thread you mentioned has it in bold red colours that its old and three is a new thread..
your best option.. download your stockfirmware or any other stock firmware ..use odin to flash..
then download the corresponding chainfires kernel and flash using odin.. you will get root plus the yellow triangle.. numerous guides around
xinfinityoO said:
firstly the thread you mentioned has it in bold red colours that its old and three is a new thread..
your best option.. download your stockfirmware or any other stock firmware ..use odin to flash..
then download the corresponding chainfires kernel and flash using odin.. you will get root plus the yellow triangle.. numerous guides around
Click to expand...
Click to collapse
I have a yellow triangle already @ Boot..
Does this mean I have root?
Sent from my GT-I9100 using XDA App
I thought the yellow triangle had to do with the fact it starts up in 'safe mode'
-Phone detects other Kernel than stock (or corrupt kernel) and notifies you by that triangle?
Right?
Sent from my GT-I9100 using XDA App
Someone?
Sent from my GT-I9100 using XDA App
should be rooted if you flashed a rooted kernel, hence the triangle
did much of that today myself to unlock a phone that never had a simlock to begin with, and flashed a new rom, now stuck at getting BLN to work ...
Im pretty sure that GUIDE is very old and outdated , all i did to root mine was flash cf kernel with ODIN from here .
And done you are rooted , why would you need to use superoneclick ? or do some weird steps
easy to understand that he got confused in the jungle of threads w/o a wiki or how to guide....the info is all there it;s just not that organized imho.
ghost77 said:
Im pretty sure that GUIDE is very old and outdated , all i did to root mine was flash cf kernel with ODIN from here .
And done you are rooted , why would you need to use superoneclick ? or do some weird steps
Click to expand...
Click to collapse
Thank you ghost77!
That did the trick!
[issue SOLVED]
Sent from my GT-I9100 using XDA App
I bought a samsung galaxy s2 today and rooted it with "odin" and "s2 root".
I installed the insecure.tar rooted it and installed original.tar
Then I installed ClockworkMod Recovery 4.0.1.4 and Rom Manager from the marketplace, I rebooted into recovery mode and tried out clockworkmod and it worked fine but whenever I reboot my sgs2 it shows me this yellow triangle again.
Did I do something wrong? Is my phone "bricked"?
Your phone is not bricked. It is not bricked if you can boot into download, it certainly isn't bricked if it boots normally. I like to be more helpful with noobs, and would normally explain the triangle, but I'm in a bad mood, so search yourself.
Sent from my GT-I9100 using XDA App
the yellow triangle just warns you that your ROM is not from sammy.
Just means that you aren't running an official kernel/rom. Nothing to worry about. To get rid of it either flash back to an official rom and kernel using Odin or use a USB jig and an old bootloader.
If you have no jig use cf's method: install the correct cf kernel, then flash the original kernel back, then extract the zImage from your cf kernel put it on your sd card, go into cwm manager and flash the extracted cf zImage as a kernel and your triangle will be gone. There are more detailed instructions on his thread.
Sent from my GT-I9100 using Tapatalk
Not the best 1st post
Welcome.
It's alway good to search before asking questions. The sgs2 has been discussed on xda for a fair while now so I reckon just about anything you would want to know will already be posted somewhere.
Don't know if you have already found chainfires cfroot thread it's the easiest way to root your phone and all the info you need is in the 1st few posts.
Sent from my GT-I9100 using XDA App
Hi, its incredible how helpful some people are...
Anyways, if your planning on having a custom rom on the GS2 learn to love that yellow triangle. Sadly thats the way samsung devices are design to annoy users of custom roms.
Sent from my GT-I9100 using xda premium
If you are one ICS, ChainFire made an app to remove the triangle and reset the flash counter.
Sent from my GT-I9100 using Tapatalk
Elisha said:
If you are one ICS, ChainFire made an app to remove the triangle and reset the flash counter.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
hmmm I had no idea that existed. I'm going to try that now.
Update: It worked perfectly. Here is a link: http://forum.xda-developers.com/showthread.php?p=22463153#post22463153
Sent from my GT-I9100 using xda premium
johnebs said:
Hi, its incredible how helpful some people are...
Click to expand...
Click to collapse
Dont think anyone is trying to be unhelpful. People understand more when they have answered the same question many times or had to read it over and over again.
OP appears to be intelligent, rooted and flashed cm, all without asking so I'm guessing they were just having a moment.
BTW reading what has been written about that new triangle removing app before using it is vital unless you're happy to brick your device if you get it wrong or Samsung change something.
Anyway happy flashing.
Sent from my GT-I9100 using XDA App
I read a topic about triangleaway by Chainfire.. i read few pages and the OP but i did not find my answer. Im new user for samsung Galaxy S II.. I DONT WANT TO BRICK MY PHONE.. BUT i jus want to know what its use in ICS build..
Sent from my GT-I9100 using Tapatalk
Chainfire said:
This app can reset your flash counter and triangle on ICS builds.
Click to expand...
Click to collapse
What was unclear about this? It removes the custom binary flash counter, the one you see if you've flashed a non Samsung kernel from download mode, and also the corresponding indicator (triangle) when you boot your phone afterwards.
sam razzy said:
I DONT WANT TO BRICK MY PHONE
Click to expand...
Click to collapse
So don't flash anything, stick to stock, and wait for official updates via Kies.
I don't have triangle... I removed it using some other method... I have 2 counter.. but I just want to know why the need of reseting
Sent from my GT-I9100 using Tapatalk
Resetting the flash counter isn't 'necessary'. But if you ever want to send your phone in for warranty service, not resetting the flash counter before you send it in for service might well mean you end up paying for your phone to be repaired/replaced rather than having same done on Samsung's dime.
Clear ?
sam razzy said:
I don't have triangle... I removed it using some other method... I have 2 counter.. but I just want to know why the need of reseting
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
If you don't know it, you probably don't need it
mengsuan said:
If you don't know it, you probably don't need it
Click to expand...
Click to collapse
If you Donno how to help then please get out of my thread
Sent from my GT-I9100 using Tapatalk
Samsung warranty .
Void if custom rom or rooted phone or root apps or custom rom counter above zero .
Its as simple as that .
USB recovery jig can set custom rom to zero but not on later firmware with newer bootloader such as beta ICS .
jje
Thank you.. I got answer..
Sent from my GT-I9100 using Tapatalk
AOKP ROM's
did anyone try this on the AOKP type roms?
assaf.bm said:
did anyone try this on the AOKP type roms?
Click to expand...
Click to collapse
I'm using it from the latest build on early march, still got bugs same with cm9. But it is smooth rom compare to others.
You should try it.
Sent from my GT-I9100 using XDA
How safe it is to use that method to get counter to zero?
dkgr_ser said:
How safe it is to use that method to get counter to zero?
Click to expand...
Click to collapse
Read the triangleaway thread. It states the dangers and how to use it.
Sent from my GT-I9100 using XDA App
Hello xda
I need some help rooting ny phone, its running stock ics
Sent from my GT-I9100 using XDA
1. note the current version of your rom
2. goto chainfire cf root thread in "original android development page"
3. download the matching cf root version
4. flash it via cwm
I can't seem to figure out which one I should use
My kernel is: LPQ
Sent from my GT-I9100 using XDA
Dasmikko said:
I can't seem to figure out which one I should use
My kernel is: LPQ
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Meant to Quote you but Thanked you, so enjoy
Anyway, Its clearly listed under the ICS ROM listing on Post #8 in that thread:
CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.zip (use also for LPE)
Oh sorry, didn't see it but thanks!!!
Sent from my GT-I9100 using XDA
3xeno said:
Meant to Quote you but Thanked you, so enjoy
Click to expand...
Click to collapse
Lol! It happens often
#*posted on the move *#
By flashing the rooted kernel, will it wipe my phone?
Sent from my GT-I9100 using XDA
Dasmikko said:
By flashing the rooted kernel, will it wipe my phone?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
No but only a foold does not have a backup of data and most important rule one backup your EFS folder .
jje
How do I backup that???
Sent from my GT-I9100 using XDA
First time i flashed i tried CF-Root kernel but no go, then i tried Siyah kernel, just flash via odin and then i got root and CW Recovery
The latest stable siyah kernel should work fine (they run fine on all stock SGS2 roms as far as i know)
What about speed mod for ics?
Sent from my GT-I9100 using XDA
I have a stock sgs2 ics and i want to root my phone. Pda xxlpq, phone xxlpq, csc xxlpd (NEE = nordic). Is the cf-root xx xeo lpq correct?
Sent from my GT-I9100 using xda premium
I was also wondering, will I get the yellow triangle by rooting??
Sent from my GT-I9100 using XDA
Sepp82 said:
I have a stock sgs2 ics and i want to root my phone. Pda xxlpq, phone xxlpq, csc xxlpd (NEE = nordic). Is the cf-root xx xeo lpq correct?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, it's the right one.
Dasmikko said:
I was also wondering, will I get the yellow triangle by rooting??
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yes you will but you could remove with triangle away from play store.
bajee11 said:
Yes, it's the right one.
Yes you will but you could remove with triangle away from play store.
Click to expand...
Click to collapse
But I've read it could possibly brick the phone harder than a boot loop?
Sent from my GT-I9100 using XDA
Dasmikko said:
But I've read it could possibly brick the phone harder than a boot loop?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
If you put the wrong one, it could.
Settings> About Phone> Baseband Version> check the last 3 letters, and I believe yours is LPQ so get CF-Root for LPQ and you should be good. After flashing that with Odin, you should have CWM and root.
Use the efs app to make a backup.
Sent from my GT-I9100 using XDA
I'm still a little confused on how root my phone.. do I just flash the rooted kernel by chainfire via Odin?
Sent from my GT-I9100 using XDA
Download the correct file from Chainfire. Unzip it once. Dont unzip it twice. Your looking for the file to end in .tar. Make sure Kies is not running. start Odin as administrater, connect the phone to the pc through USB. ID:COM should show up yellow. Click on PDA. Load the .tar file.
Make sure Re-Partition is NOT TICKED. Auto Reboot and F. Reset Time SHOULD BE TICKED. Press start. DO NOT REMOVE THE USB CABLE till you have a green pass,as this will result in a bricked phone..
How big are my chances to get my phone bricked by using triangleAway??
Hi guys,
Recently I bought a used GSII but it has some problems and I had send it back. Today I bought another used one. Read here on XDA about eMMC Brickbug and this thing scares me, I don't want to brick my phone!
On the first GSII, installed eMMC Brickbug Checker from Play Store and the chip was sane. But this new one I got today has a insane chip it says. Does this mean the hardware is damaged or the kernel has this bug?
Flashing a custom kernel ( for example: Siyah kernel) will it solve this or it will brick my phone? Phone is running stock ICS 4.0.3 and it is not rooted.
Thank you!
If you're on 4.0.3 you have nothing to worry about. Even if its an 'insane chip'. More so if you're on stock and don't intend to mess around with custom kernels, rooting, etc. Its certain 4.0.4 firmwares that have the bug.
If you do wanna root et al, just to be absolutely safe, install a custom kernel like siyah via Odin before flashing custom ROMs or performing a backup, wiping data n all that jazz.
Sent from my GT-I9100 using xda app-developers app
Flashing any custom rom or kernel from dedicated devs like gokhan, codeworkx or dorimanx won't brick your phone with their reputations as elite android experts if u follow detailed instructions carefully as per. Also it will root ur phone automatically..
Sent from my GT-I9100 using xda app-developers app
Thank you guys, I will try to install a custom kernel because I need to root. As for custom ROM I would like to flash Omega v15 but will leave it for later
And for the kernel, which one do you recommend?
Kristi-Tech said:
Thank you guys, I will try to install a custom kernel because I need to root. As for custom ROM I would like to flash Omega v15 but will leave it for later
And for the kernel, which one do you recommend?
Click to expand...
Click to collapse
flash the .tar file of the latest 'Siyah kernel v4.1.5' thro odin ma8
1) it will root ur phone and install the latest CWM recovery for u.
2) its free from the 'eMMC brick bug' for sure.
Sun90 said:
flash the .tar file of the latest 'Siyah kernel v4.1.5' thro odin ma8
1) it will root ur phone and install the latest CWM recovery for u.
2) its free from the 'eMMC brick bug' for sure.
Click to expand...
Click to collapse
Just flashed Siyah v4.1.5 ....although eMMC check app show that the chip is insane. Phone rooted and I'm "safe" to flash any ROM I like
Thanks again guys, I really appreciate your help! :good:
p.s I don't like the yellow triangle during start up....can it be removed safely using Chainfire's app TriangleAway?
It comes with a warning. There's always an element of risk however small. So I personally haven't used it. After all its merely cosmetic unless you're worried about your warranty.
Sent from my GT-I9100 using xda app-developers app
Kristi-Tech said:
p.s I don't like the yellow triangle during start up....can it be removed safely using Chainfire's app TriangleAway?
Click to expand...
Click to collapse
yes
Sun90 said:
yes
Click to expand...
Click to collapse
and the triangle disappeared
Kristi-Tech said:
and the triangle disappeared
Click to expand...
Click to collapse
Next time if u lost ur root this is easiet cwm method without flashing insecure kernel & wtf yellow triangle is??!!
http://forum.xda-developers.com/showthread.php?t=1501719
Sent from my GT-I9100 using xda app-developers app
Adam Hui said:
Next time if u lost ur root this is easiet cwm method without flashing insecure kernel & wtf yellow triangle is??!!
http://forum.xda-developers.com/showthread.php?t=1501719
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I rooted flashing a custom kernel and I like how the phone works. So for now I'm leaving it as is. Will wait for Samsung to release official JB for our SII next month
And the yellow triangle is that one you see during when your phone is rebooting. It appears if you have flashed a custom kernel/ROM.
Kristi-Tech said:
I rooted flashing a custom kernel and I like how the phone works. So for now I'm leaving it as is. Will wait for Samsung to release official JB for our SII next month
And the yellow triangle is that one you see during when your phone is rebooting. It appears if you have flashed a custom kernel/ROM.
Click to expand...
Click to collapse
Good plan, let's pray for it..
Lol.. ofcoz I've done w/ it mate..
I've been just wondering why people still choose a complicated & a risky brick bug method by externally flashing insecure kernel instead a simple easiest way. Guess they think yellow triangle is the doorprized celebration for their 1st flashing experience.
Sent from my GT-I9100 using xda app-developers app