Related
Last week I flashed LD3 for my Galaxy S2 i777. Today I was going to flash CM9. Every time I tried to boot into recovery it just started the phone.
I figured I could use mobile odin to flash a new kernel and it would fix it. Like an idiot I used a Gingerbread kernel on my phone running an ICS rom. So of course my phone froze on the "Galaxy S2" screen.
I couldn't boot into recovery and freaked out because I couldn't boot into dl either. I ordered a jig but kept fiddling in the meantime. I found that if I hook my phone to the USB, wait for the battery charging icon, take the battery out, then hold the down button it would boot into dl mode. Then I had to put the battery back in before I clicked continue or else it just reset.
Ok, so got into DL mode. I grabbed the stock rom and kernel from XDA site and flashed them with Odin. http://forum.xda-developers.com/showthread.php?t=1286432 (can't post links yet).
The phone starts and setup mode begins. It shows the android figure and says click it. Now all kinds of errors pop up telling me different google services weren't working and force close. When you click the android figure it goes to setup wizard screen but nothing happens (except more android service errors).
Can someone help me out here? I've been at it 5 hours and searched this forum high and low. My thought is there are some ICS elements left behind in there it is trying to load, but I could be way off.
I still can't boot into recovery mode, just DL.
PenguinSpark said:
Last week I flashed LD3 for my Galaxy S2 i777. Today I was going to flash CM9. Every time I tried to boot into recovery it just started the phone.
I figured I could use mobile odin to flash a new kernel and it would fix it. Like an idiot I used a Gingerbread kernel on my phone running an ICS rom. So of course my phone froze on the "Galaxy S2" screen.
I couldn't boot into recovery and freaked out because I couldn't boot into dl either. I ordered a jig but kept fiddling in the meantime. I found that if I hook my phone to the USB, wait for the battery charging icon, take the battery out, then hold the down button it would boot into dl mode. Then I had to put the battery back in before I clicked continue or else it just reset.
Ok, so got into DL mode. I grabbed the stock rom and kernel from XDA site and flashed them with Odin. http://forum.xda-developers.com/showthread.php?t=1286432 (can't post links yet).
The phone starts and setup mode begins. It shows the android figure and says click it. Now all kinds of errors pop up telling me different google services weren't working and force close. When you click the android figure it goes to setup wizard screen but nothing happens (except more android service errors).
Can someone help me out here? I've been at it 5 hours and searched this forum high and low. My thought is there are some ICS elements left behind in there it is trying to load, but I could be way off.
I still can't boot into recovery mode, just DL.
Click to expand...
Click to collapse
Did you do a full wipe before flashing the stock rom and kernel?
I did not do a full wipe. How can I go about that without logging into recovery? I'm googling that now but if you have linkage I would appreciate it.
mattdm said:
Did you do a full wipe before flashing the stock rom and kernel?
Click to expand...
Click to collapse
dont need to wipe when using Odin/Heimdall.
To OP:
there is only factory recovery, no CWM, you could always just flash a kernal from the DEV section, get CWM, flash CM9.
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
PenguinSpark said:
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
Click to expand...
Click to collapse
So let me get the straight...you're on unrooted stock right now? If that's true, you should:
1. Do a factory reset from settings.
2. Use Odin to flash the Stock with Root package.
3. Use Mobile Odin to flash either Entropy's DD or Siyah.
4. Use CWM to flash what you want after that.
PenguinSpark said:
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
Click to expand...
Click to collapse
recovery is in kernal. If you flash a kernal from the DEV section you'll get CWM recovery, then you can flash your CM9 that you wanted, after a wipe data/factory reset.
MotoMudder77 said:
recovery is in kernal. If you flash a kernal from the DEV section you'll get CWM recovery, then you can flash your CM9 that you wanted, after a wipe data/factory reset.
Click to expand...
Click to collapse
Yes, but if he flashes said kernel with Odin, it'll trip his flash counter. I'm just telling him the safe way to do it, Mobile Odin.
I've already tripped my counter. I have a jig that will be here tomorrow so I can use it to reset the counter.
I can't use mobile odin because I can't log into my phone. I can only use desktop Odin.
All the files I am digging up look like .zip made for cwm. Could someone help guide me towards a kernel I can flash from desktop?
PenguinSpark said:
I've already tripped my counter. I have a jig that will be here tomorrow so I can use it to reset the counter.
I can't use mobile odin because I can't log into my phone. I can only use desktop Odin.
All the files I am digging up look like .zip made for cwm. Could someone help guide me towards a kernel I can flash from desktop?
Click to expand...
Click to collapse
Either Entropy's DD or Siyah. You can open the zip and extract the zimage; the zimage is the kernel.
I just tried using Syiah:
http://forum.xda-developers.com/showthread.php?t=1367800&highlight=cf-root
I still get this message:
"The process android.process.acore has stopped unexpectedly. please try again"
I can't get past the setup screen.
And I still can't access recovery.
PenguinSpark said:
I just tried using Syiah:
http://forum.xda-developers.com/showthread.php?t=1367800&highlight=cf-root
I still get this message:
"The process android.process.acore has stopped unexpectedly. please try again"
I can't get past the setup screen.
Click to expand...
Click to collapse
you flashed siyah kernal, booted into recovery, wiped data, and reflashed and are still getting this?
I can't boot to recovery
PenguinSpark said:
I can't boot to recovery
Click to expand...
Click to collapse
Flash the return to stock package from Odin again. Something must have gone wrong with it the first time.
well thats wierd. Sorry man but are you doing it right?
vol down and power. hold it untill the screen flashes twice.
I flashed stock 3 times now. I couldn't get into recovery before this (manually or with rom manager) and still can't. It starts like its going into recovery then just resets and loads normally.
Down is for dl mode, up is recovery.
I think the lack of ability to boot into recovery and the android service errors may be related.
PenguinSpark said:
I flashed stock 3 times now. I couldn't get into recovery before this (manually or with rom manager) and still can't. It starts like its going into recovery then just resets and loads normally.
Down is for dl mode, up is recovery.
I think the lack of ability to boot into recovery and the android service errors may be related.
Click to expand...
Click to collapse
Forget recovery. You shouldn't be worrying about recovery until after you get your phone booting.
New thought: maybe your download of the stock package is corrupted. Try to download it on your computer again. Download the one with root. If that fixes it, you can go use Mobile Odin to flash the Siyah kernel.
To get into recovery hold down both volume up, volume down, and power button and don't let go until recovery comes up.
Sent from my SAMSUNG-SGH-I777 using XDA
I have been using the rooted. The fully stock won't dl. This started because I flashed a gb kernel instead of ics. Maybe I should try flashing an ics kernel instead of stock gb?
Hello all,
I have an issue with my Samsung Galaxy Ace GT-5830i that is stuck in Android system recovery (3e) mode, and it seems there is no way to get it out of there.
- upon selecting wipe data/factory reset the device is stuck with one message "multicsc: src /system/csc/MTL/system/ ." and "Formatting /data..." bellow
- upon selecting apply zip from the SD card the installation always fails with various error messages (I tried to install cyanogen mod rom in an attempt to recover, but failed as well)
- upon selecting reboot now the whole screen disappears with only the "multicsc: src /system/csc/MTL/system/ ." message at the bottom of the screen and I need to remove the battery.
I will greatly appreciate if anyone on this forum could help with the issue, as I have search for possible solutions without any luck so far, and my phone appears to be bricked.
Thank you,
John
My guess is u still on stock recovery. Flashing cm rom or any other custom rom needs clockworkmod recovery, moroever theres no cm rom for s5830i yet.
For now u could try to reflash stock rom with odin. Theres a thread somewhere guiding howto do so for s5830i. Also do note that anything for original s5830 wont work on your s5830i.
Last but not least, do read more and understand what you're trying to do before u really hardbricked the poor thing.
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Samsung Ace s5830i Stuck on recovery
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
john.smith1972 said:
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Click to expand...
Click to collapse
DevDeep700 said:
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
Click to expand...
Click to collapse
Don't use nothing from GT-S5830 model your model is GT-S5830i
What's exactly your problem?
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
evilpiggy6172 said:
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
Click to expand...
Click to collapse
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Centrumgsm said:
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Click to expand...
Click to collapse
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
mahithm said:
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Oh right, sorry. Forgot about the download mode combination. Why they found it necessary to change it for this one model, I'll never understand. Flashed it back to life, thanks
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Have you flashed a fresh rom?
PS: It's a WRONG SECTION
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Flash stock rom thru odin then from recovery mod Clear data and cache then reboot. [emoji4]
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Ghost1105 said:
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Click to expand...
Click to collapse
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
amolgosavi said:
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
I already tried that, still same
Can somone please help me. I have no idea whats wrong. Its stuck at the Samsung boot logo and wont do anything.
This is what i did before it all.
I wanted to try out a custom ROM, so i installed SuperNexus.
Decided i did not like it that much, plus i did not get WIFI to work. Just wanted to try it out more or less.
So i wanted to reset it to STOCK rom again.
I followed this guide
http://forum.xda-developers.com/showthread.php?t=1646610
And after ODIN was done, its just stuck at the boot logo.
Did i do something wrong? Is it broken?
I did not follow the steps to "reset the warranty" as i thought it would not be any problem.
As i was gonna keep on going rooted.
So i cant go back and get a new one...
Somone please, any advice or tips on what to do?
do u still hav the recovery? try flash another custom rom and see
Sent from my GT-I9300 using xda premium
Did you do a data wipe in recovery mode?
Sent from my brain using my GT-S5830
Don't worry you haven't broke it. Just seems like you have made a wrong step and messed it up. Easily fixed. Try doing a full wipe and follow the guide again
Sent from my Samsung Galaxy S3 using XDA Premium
Seems like a kernel related problem. Try to start the guide again or try to flash a kernel with Odin or CWM. Will probably boot after a successful installation!
No i did not do a wipe, wich i probably should have. Problem now is, i cant get back into CWM or am i doing a wrong step?
EDIT: I got into CWM, i did a full wipe. Reboot. Nothing still stuck. Also did try to reinstall a custom ROM and still stuck the the new shiny logo that came with it.
Nemian said:
No i did not do a wipe, wich i probably should have. Problem now is, i cant get back into CWM or am i doing a wrong step?
Click to expand...
Click to collapse
Try the Volume-Up (I think, might be down, one does recovery, the other does download mode, you want recovery) + Home Key + Power button on boot.
If that doesn't go into recovery, you should be able to still go to download mode and flash using Odin from your computer I imagine?
Yeah i read the wrong one when i searched around. I got in. Phone is fixed now =) It booted when i took full wipe AND clean the cache thing.
Thanks for the help!
Full wipe is usually helpful when it comes to stuck on boot situation,corrupted rom or not correctly flashed rom.
after u flash with odin
u should enter recovery
do a factory reset
and it will work
thats how the s3 updates work
i had that problem too and i fixed it
Nothing is working.
Nothing is working for me.
Same happened to me after I flashed stock BTU (UK) 4.0.4 ROM (LG8). It just sat at Samsung logo with slowly pulsing Notification light. I rebooted and same thing.
I went into recovery (turn off and then hold VolUp + Home button + Power and as soon as lil Android appears, let go. it should go into recovery) i selected Factory reset and then wipe cache and rebooted and it booted fine.
Thanks all. I'm an 'old hat' at flashing roms etc., but never had the phone hang on boot after a flash, and you really do get a horrible sinking feeling as you wait longer and longer for it to respond. definitely gonna remember this trick to boot to recovery and wipe.
Thanks again to all
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
iPusak Gaoq™ said:
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
Click to expand...
Click to collapse
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
jan019 said:
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
Click to expand...
Click to collapse
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
iPusak Gaoq™ said:
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
Click to expand...
Click to collapse
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
jan019 said:
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
Click to expand...
Click to collapse
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
iPusak Gaoq™ said:
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
Click to expand...
Click to collapse
Okay, I'll give it a shot and come back with how I did.
jan019 said:
Okay, I'll give it a shot and come back with how I did.
Click to expand...
Click to collapse
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
jan019 said:
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
Click to expand...
Click to collapse
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
jan019 said:
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
Click to expand...
Click to collapse
Hmmmm...how many times did i have to tell you, you need to FLASH STOCK ROM first...stock rom has stock kernel inside it...flashing STOCK rom will factory reset your phone...it should make your phone like new...after your phone boot normally then you can flash custom kernel (fxp kernel) and boot into recovery using that kernel...then only then you can flash CM10 into your phone....
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
bejunk said:
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
Click to expand...
Click to collapse
Okay guys, I'm really confused right now. I just couldn't manage to boot into CWM with CM, I tried many versions, none worked. I then applied the exact same steps onto LX and it worked perfectly, I was in CWM after pressing the volume down butto na few times. Now it's been almost a month since I did this and I wanted to change to a differet version again, so I wanted to try CM again, but it's the same thing, I can't get to CWM. Any ideas?
Thanks
Hello guys. I am guessing that i am having problem with cwm. I followed tutorial on xda forum how to root i8552 with odin, i did all the same as says in tutorial. But when i am trying to go to cwm, with volume+power+home button, screen is blinking but cant load cwm.
I cant even enter in . Anyone got stock recovery for my phone? If i can flash that stock recovery from odin i will be thankfull.
wlada96 said:
Hello guys. I am guessing that i am having problem with cwm. I followed tutorial on xda forum how to root i8552 with odin, i did all the same as says in tutorial. But when i am trying to go to cwm, with volume+power+home button, screen is blinking but cant load cwm.
I cant even enter in . Anyone got stock recovery for my phone? If i can flash that stock recovery from odin i will be thankfull.
Click to expand...
Click to collapse
http://d-h.st/hcA
http://forum.xda-developers.com/showthread.php?t=2494471
Ty for reply. I followed same instructions as on that link, and i cant load cwm or stock recovery. I flesh recovery, but cant enter in...
I followed every single step.
Flash CWM again
wlada96 said:
Ty for reply. I followed same instructions as on that link, and i cant load cwm or stock recovery. I flesh recovery, but cant enter in...
I followed every single step.
Click to expand...
Click to collapse
Flash CWM with odin. Now, when the phone restarts remove the battery before it boots. Now, insert the battery after approximately a minute or so then try to enter recovery mode by using, Vol up + Power button + Home button. As soon as phone vibrates leave power button. Wait till it shows Samsung Galaxy Quattro. and then leave other two buttons too. It should boot into cwm.
At last if nothing works, do a dirty Flash stock Rom via Odin and repeat the cwm flashing process. :fingers-crossed:
mysteryno46 said:
Flash CWM with odin. Now, when the phone restarts remove the battery before it boots. Now, insert the battery after approximately a minute or so then try to enter recovery mode by using, Vol up + Power button + Home button. As soon as phone vibrates leave power button. Wait till it shows Samsung Galaxy Quattro. and then leave other two buttons too. It should boot into cwm.
At last if nothing works, do a dirty Flash stock Rom via Odin and repeat the cwm flashing process. :fingers-crossed:
Click to expand...
Click to collapse
I did all what you maintioned with flashing cwm and using odin. Also battery was out of phone for about 2 minutes (for any case).
So can you provide me a link for that "dirty stock rom" and give me intructions how to install it?
And one more thing. When i removed battery for more then 2 minutes, then start up phone, data and time was on system default. Same as phone when i bought it and first boot it. Also idk why, but my phone dont have sduos mark on top of screen, and has 1.6gb of internal memory. So maybe this will be helpfull.
Similar Case like yours ! ! !
wlada96 said:
And one more thing. When i removed battery for more then 2 minutes, then start up phone, data and time was on system default. Same as phone when i bought it and first boot it. Also idk why, but my phone dont have sduos mark on top of screen, and has 1.6gb of internal memory. So maybe this will be helpfull.
Click to expand...
Click to collapse
Sometime back there was this guy who had almost same device as you are mentioning. You can contact and talk to him. Bcoz as per my knowledge Quattro has 5.1 User available space and Duos is written on Upper right.
http://forum.xda-developers.com/showthread.php?t=2536774
By dirty flash I mean, flashing the stock rom over the current stock rom without formatting data and all. That is called dirty flash. Clean flash means wiping all data and then flash the Rom.
Take the backup of all the data and try to do a clean flash if dirty flash doesn't work.
Flashing Stock and repeating the cwm flashing process should work if every step is done as advised.
Try your luck again. :good:
What if i flash that stock rom, and then phone failed to boot. Then i will have to enter in recovery mode, but idk if i will be able to enter in...
If you flash the stock Rom properly, it should boot.
wlada96 said:
What if i flash that stock rom, and then phone failed to boot. Then i will have to enter in recovery mode, but idk if i will be able to enter in...
Click to expand...
Click to collapse
If you know how to use odin and flash the clean stock rom, it has to boot. There is no way it won't until unless you make some mistake and the flashing fails in between. After flashing the stock rom, initial boot will take long time, you need to keep patience.
Go ahead and flash the stock rom via odin.