Related
Got a 32GB version.
All my other devices, windows laptops, android tablet connect up to my wifi fine. I am using WPA with AES (static IP). The HP Touchpad connects, but there is huge packet loss and it barely can keep a connection. It doesn't drop out per se, just cant get any data. Tried changing router settings, being 30cm from it etc. Still same problem. Any apps/tweaks i can try on the Touchpad?
Maybe it has something to do with Wi-Fi 802.11b/g/n with WPA, WPA2, WEP, 802.1X authentication;
maybe your router doesnt support it.
Just curious, are you running any of the Preware patches?
I am having a similar problem with my 16gb wifi model. Wifi works for a short while, then drops the signal. If I go in and turn off wifi on the device and turn it back on again - then it will work fine for another few minutes until it eventually drops the connection again.
I had this problem before I loaded any preware tweaks - and after as well. I am running the Govnah app to overclock to 1.5ghz and a few other logging tweaks.
I did some digging and it seems the most likely issue is a problem with the firmware of my router (D-link DIR-655), specifically the wireless n protocol. I am going to try updating my router firmware and see if that helps out.
By the way - no issues with my two laptops, dell streak 7, or my wii - so its definately isolated to be an issue specific to my touchpad/router combination...
I too am having problem. I don't drop the wireless connection, just a internet connection. All of a sudden nothing on my touchpad can connect to the internet, until I turn the wireless off and then back on again. Very weird. Everything else working off of my Dlink DGL-4500 works fine, except the touchpad.
I notice a few of you have Drinks, maybe thats the cause?
I'm running on FIOS and using Verizon's provided router. Works flawlessly. I've had one issue w/ WiFi, but a reboot solved that and has never come back.
I had problems with my dlink 615. TP would lose connection after 20 minutes or so. My wife's would do the same. My evo 4g had the same problem. I changed the router to the G only setting. I haven't had any problems with either TP since that change. The 615 uses draft N and was one of the early routers with this. I think it causes problems with some devices. I haven't really lost any speed either as the 615 will only connect at the speed of the "slowest" wireless card on the network, and I have some devices at g speed that are always on. I do plan to get a new router at some point.
jdexheimer said:
I had problems with my dlink 615. TP would lose connection after 20 minutes or so. My wife's would do the same. My evo 4g had the same problem. I changed the router to the G only setting. I haven't had any problems with either TP since that change. The 615 uses draft N and was one of the early routers with this. I think it causes problems with some devices. I haven't really lost any speed either as the 615 will only connect at the speed of the "slowest" wireless card on the network, and I have some devices at g speed that are always on. I do plan to get a new router at some point.
Click to expand...
Click to collapse
See my Touchpad is the ONLY device having problems, that's the part I don't get. All of my devices are wireless N as well.
TouchPad WiFi issues
Okay, I've tried every custom kernel available with almost the same results. I'm beginning to think my unit is defective, but I am hoping it is the custom kernels and not my unit. I haven't tried restoring the stock kernel but I suppose I should have before writing this. Anyway..onto the issue!
Does anyone have this problem where WiFi will randomly stop transmitting data? It happens most when I am browsing the web with the stock browser and almost all the time it is after the unit awakes from sleep. Sometimes it happens while browsing but the majority of the time it happens when coming out of sleep. WiFi is still on and connected to my network, but network activity is not there. The only way to fix it is by doing one of the following:
-Turn off and on WiFi
-Launch the HP software catalog.
The second method one seems to give the network a jump start and WiFi will begin working again and data will transmit.
Freeza I think that's a common slug, I read some other posts about it. Heck mine was doing it a lot, but not so much lately. I don't think you have defective device.
Sent from my HP Touchpad using xda premium
I have this issue too, on two Touchpads on the same wifi network (mine and my wife's). The issue vanishes on my portable wifi 4G hotspot and my much better office wifi network, so it's probably my router. I've ordered a MUCH better router, and if that kills the problem, I'll know for sure within a week.
I hear this is a common, but situation-specific issue.
phew.... Was getting worried for a bit there. Thanks guys. Hopefully the next webOS update can fix it
yoseth said:
Got a 32GB version.
All my other devices, windows laptops, android tablet connect up to my wifi fine. I am using WPA with AES (static IP). The HP Touchpad connects, but there is huge packet loss and it barely can keep a connection. It doesn't drop out per se, just cant get any data. Tried changing router settings, being 30cm from it etc. Still same problem. Any apps/tweaks i can try on the Touchpad?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1257357
I also have this problem. The wireless on the TP will stop working, even though it says it is connected. Disabling and re-enabling the wireless fixes it temporarily.
I also have an 802.11N wireless router. It is a Trendnet TEW-633GR. No other wireless device has ever had an issue with it, so I think the touchpad doesn't handle something properly...
My wifi connection is dropping within seconds of connection. The phone switches to 3g, wifi turns back on and connects again for a few seconds, drops then kicks back onto 3g.
Ive had this issue on multiple roms, so I am relating it to something similar to RezRom and CleanRom or to the leak itself.
Anybody have ANY ideas?
Update: seems that after the firmware update, my router and phone did not like each other. I was able to tweak my router quite a bit and it appears that the dropping connection issue is resolved.
ih8mydroid said:
My wifi connection is dropping within seconds of connection. The phone switches to 3g, wifi turns back on and connects again for a few seconds, drops then kicks back onto 3g.
Ive had this issue on multiple roms, so I am relating it to something similar to RezRom and CleanRom or to the leak itself.
Anybody have ANY ideas?
Update: seems that after the firmware update, my router and phone did not like each other. I was able to tweak my router quite a bit and it appears that the dropping connection issue is resolved.
Click to expand...
Click to collapse
It is a wireless N router? I do believe I read that our phones are having issues when on the 5Ghz band.
mjones73 said:
It is a wireless N router? I do believe I read that our phones are having issues when on the 5Ghz band.
Click to expand...
Click to collapse
The phone does not have 5GHz abilities, but regular 2.4Ghz N is supported.
Via Rezound using XDA Premium
EDIT: Take that back, however it doesn't see any of my 5Ghz access points here at all.
I have a wireless N router at home with no problems. It is on the 2.4ghz band though. I think.
ih8mydroid said:
Update: seems that after the firmware update, my router and phone did not like each other. I was able to tweak my router quite a bit and it appears that the dropping connection issue is resolved.
Click to expand...
Click to collapse
What settings did you wind up changing? I have a similar issue with my phone and one of my routers.
destro158 said:
What settings did you wind up changing? I have a similar issue with my phone and one of my routers.
Click to expand...
Click to collapse
Ditto. My wi-fi is dropping intermittently. If I toggle it off and back on, it starts working again.
What router tweaks did you do or phone tweaks?
My rezound picks up N 5ghz just fine.
Sent from my ADR6425LVW using xda premium
I'm having the same problem. However, mine doesn't drop out within seconds, it'll probably be good for a couple hours then I'll notice it's trying to sync with my Exchange server for a while, and will eventually time out and then I lose all internet connectivity until I turn wifi off and back on again. This happens on multiple wifi networks, including wireless-N and non wireless-N.
I do also see that the 3g icon will come and go every few seconds when connected to wifi. Anyone know if this is just a bug with the new ICS leak or is there some kind of fix floating around?
dynofrk666 said:
I'm having the same problem. However, mine doesn't drop out within seconds, it'll probably be good for a couple hours then I'll notice it's trying to sync with my Exchange server for a while, and will eventually time out and then I lose all internet connectivity until I turn wifi off and back on again. This happens on multiple wifi networks, including wireless-N and non wireless-N.
I do also see that the 3g icon will come and go every few seconds when connected to wifi. Anyone know if this is just a bug with the new ICS leak or is there some kind of fix floating around?
Click to expand...
Click to collapse
I am unlocked and rooted but I am running the stock ROM and mine does exactly what yours is doing. I don't actually know if this happens outside of my house since I'm generally using 3/4G then.
I have a thread on this in the question section but no answers yet.
killahrey said:
My rezound picks up N 5ghz just fine.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
This is true. The rezound does seem to have 5ghz capability. However my POS netgear doesnt get the same distance on 5ghz as 2.4ghz.
As far as what I did was actually reset my router and update firmware. This seems to have fixed the issue for now. I only started having this issue with the updated leak and it was happening on all roms and even stock. Reinstalling a ROM would fix it for about 2 to 3 minutes then it was back to switching between both data and wifi.
My phone burned up the battery in a matter of an hour and half as it was constantly going from wifi to 3g.
My phone does the same thing!! I think it happpened when I flashed the new leak zip without re locking vootkoader. In hoping that official ics will fix it
Sent from my ADR6425LVW using Tapatalk
Just curious if anyone found a solid solution to the Wifi problem that we seem to be experiencing with the new leak? I tried the suggestion of disabling auto wifi in the dock mode but that didn't seem to fix it for me. I guess I'm just trying to see if this is widespread, or if it's only affecting certain people in different scenarios. It doesn't seem to be getting as much attention as the overheating/battery life issues that others are reporting.
So far I've tried connecting to multiple networks with different security types (open, wpa, wpa2, wep) all seem to the have the same result of showing that wifi is connected, works for a couple of hours, then will lose wifi connectivity, even though the wifi indicator is showing that it's connected. I've done everything i can think of other than re-flashing the ICS leak. I've also never unlocked my phone, just installed the update per the original instructions on Android Police.
Hi all ,
I met wifi problem with a dozen roms ... i flashed and wipe ... firstly I think is my phone hardware problem , but after I changed the channel of my rounter to channel 1 ... the problem solved...(so far)... I would like to ask if any razr owner have the same problem also ?
Hi mate,
I'm experiencing some WiFi problems with my RAZR and the home Linksys router as well. Haven't tried your solution with Channel 1 yet, though, but I'm gonna go and switch to it right away and report the outcome.
EDIT: Weird... Now my WiFi connection is almost lightning fast and no data losses. Well, thanks, hiha!
Speaking of Linksys routers... a While ago I changed my Linksys WAG120N router from G mode to N mode. Strangely, my RAZR started to reboot randomly. I switched the router back to G, and everything got back to normal.
Funny things are happening, it appears.
My Linksys E4200 is currently in Mixed mode and set on Channel 1 - this appears to be the optimal configuration for work with RAZR.
I also have problems with wifi. Really bad signal at home, like 5 meter away it drops to zero
I tried channel one, still same problem.
I noticed when u hold the phone and cover the right side wifi drops and dies constantly. Just like the iphone 4
Sent from my XT910 using XDA
I'm on my 2nd Razr Maxx (first one had a cracked screen), and neither has/had any issues with my Wifi network. My router is on the 2nd floor (FiOS Actiontec, mixed mode G N). I get a good signal throughout my entire house, and have never had a single problem.
I hope ics fixs the wifi signal, its horrible. I am now on 2.3.6
Sent from my MZ601 using XDA Premium HD app
romdroid. said:
the right side wifi drops and dies constantly. Just like the iphone 4
Sent from my XT910 using XDA
Click to expand...
Click to collapse
this is spot when wifi chip is and probobly antenna
when i have hand in that place signal is much weaker - 20dbm
wifi issue
My wife has a droid 3 and I have a razr. I am running netgear routers
with dd-wrt open source software. Both of these phones were unusable
when we first tried them. I logged into my router and set the qos settings
to enable and both phones now work flawlessly. It seems that the wifi chip
in these phones cycles on and off to conserve power. Without the proper handshaking between the two devices ,when the phone chip shuts down the
buffer overflows in the router and it disconnects because the data
is no longer valid. By eneabling the quality of service setting the router and
the wifi chip use a protocol to prevent this buffer overfllow.
If you search the microsoft knowledge base you will find that vista and win 7
had to have a software upgrade to address this same problem when they
first came out.
Some modems have the qos disabled by default to maintain a higher
throughput.
If you go to the dd-wrt wiki and search for qos it goes into more detail
as to how this works.
Wifi issues here too.
Forget low connectivity, my phone blatantly refuses to even connect to a connection secured with 802. 1x EAP. It is embarrassing to say the least.
I have issues where mobile connection and wifi go blue to grey after a while and no longer work. Possibly what the op refers to.
Also, similar to the iphone4 problems, holding my phone reduces both wifi and mobile data signals drastically. Is this a general device issue?
I am wondering if its something the motorola ics release might address.
Sent from my XT910 using Tapatalk 2
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
i thought wifi was only 2.4ghz on this phone. my 5ghz network doesnt even show on my phone.
5ghz seems to be working fine for me
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
grad20_09 said:
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
Click to expand...
Click to collapse
I have been able to use channels 140 and 149 as well as 36. What I did notice is that the first time I connect to (the very first time or if I make a change to the router) the wifi signal will drop and start several times.....I find if I just turn off wifi and turn it back on and reconnect it will hold.
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
dagnasty said:
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Hmmm...mine is set to N only...being its the only device on my 5G connection.
Yea, the only thing on mine is my other router setup as a bridge for my downstairs. I guess ill leave it since its working
Sent from my EVO using XDA
I've got an apple airport extreme. my evo connects just fine on 5ghz
I have a Cisco ISR wireless router and I use strictly 5Ghz. It's wireless-A, not wireless-N, but it's strictly 5Ghz and it scan and uses whatever channel it wants. No issues so far.
I tried N network a while ago on my older phones (not 5Ghz N) and noticed more battery drain VS G. Since then I have switched my N to 5Ghz and just use my ipad3 for it. My phone I keep on G network. I don't see any real point to having it on a N network. G I still pull 10+ megabits down which is more than enough for pretty much anything the phone can do. Not really worth the extra battery drain in my opinion. My ipad I like on higher speed since I stream MKV files but the phone I think is pointless at least for me.
Sprint HTC Evo 4G LTE 5Ghz WiFi
dagnasty said:
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
Click to expand...
Click to collapse
I actually had the exact same problem as you mentioned. The one thing I wanted to add to your excellent description of problem symptoms is that it says "Authenticating", and that is when it drops the signal to -1Mbps. Something during the authentication process seems to kill the radio connectivity. This has not happened on any of my other 802.11n devices. It connects fine on the same router's 802.11g. I had no issues with my previous phone (Samsung Epic Galaxy S).
Interestingly my router is a different brand but perhaps it shares some similar chipset. My equipment as follows:
Bone stock Sprint HTC Evo 4g LTE (on Ice Cream Sandwich, duhh)
Belkin Play N600 HD Wireless Dual-Band N+ Router (F7D8301 v1)
After reading the other posts here it inspired me to play with my Router configs for 802.11N. Turns out after making some adjustments I was able to get connected.
-I had the following selected:
Wireless Channel: Auto
Extension Channel: 40 (grayed out)
Wireless Mode: 802.11a&n -Worked after changed to 802.11n
Bandwidth: 20/40MHz
Protected Mode: OFF -Worked after changed to On
802.11e/WMM QoS: On
I honestly think it was the Protected Mode that made the difference. Here is what the router help page says about that feature: Protected Mode
NOTE: In most situations, best performance (throughput) is achieved with Protected Mode OFF. If you are operating in an environment with HEAVY 802.11b traffic or interference, best performance may be achieved with Protected Mode ON.
So long story short, try turning Protected Mode ON in your 802.11n configs first and see if that gets it going for you. Hope that helps!
P.S. After changes above I ran some Speedtest.net for Android tests (back to back) and got the following from the next room over (about 20 feet from router):
Test 1: On 802.11n: 17024kbps down, 5857kbps up, 27ms ping
Test 2: On 802.11n: 18134kbps down, 6266kbps up, 39ms ping
Test 3: On 802.11g: 15385kbps down, 6091kbps up, 25ms ping
Test 4: On 802.11g: 22212kbps down, 5785kbps up, 43ms ping
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
kevinrstruck said:
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
Click to expand...
Click to collapse
What router do you have? Also what kind of connection speed are you getting?
I checked freq and it was on auto, tried just 5ghz, also tried Best wifi but it still cant connect to the internet. I gets a connection with the router according to the phone but my 6300 doesnt show it as a connected device.
no problem here i can connect to my 5Ghz network with my a/n capable Time Capsule router. speeds are 55..27 Mbps download / 35.95 Mbps upload. my One wifi settings are set to Auto (vs. setting to 2.5 or 5 Ghz).
I have a Netgear WNDR4500. Speeds are 40 Mbps down and 28 Mbps up. That is with the router 2 floors above me in my house. My settings are also set to "Auto" as well. I connected immediately when I got home on Thursday after getting the device. I have had no problems at all with WiFi. Sorry I cannot be of more assistance.
I have no problem when connecting to my R6300 in AC mode ...
mine connects just fine
No connection at 5ghz, can only connect at 2ghz
I have d-link dr-825 rev B router with [DD-WRT v24-sp2 (04/01/13) std - build 21153] firmware. It has dual 2ghz and 5ghz radios.
I can only connect at 2ghz and unable to connect at 5ghz.
I have a dell latitude laptop and my old Galaxy SII has no problem connecting.
Howvever Htc-One lists the access point, correctly determines what kind of security is on (like wpa/wpa2 etc) but is unable to connect. I think once I saw a brief flash saying authentication failure on my phone when trying to connect to 5ghz. So I removed all security and made it completely open just to try. Again no connection without any error.
I am thinking of returning it if it is going to be a problem.
---------- Post added at 12:17 PM ---------- Previous post was at 11:40 AM ----------
Ok, I have solved the problem, now it is connecting. I made two changes in the wirless setup. Enable RTS/CTS protection and also enabled short preamble. After these two changes it is connecting as expected.
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
I'm having the same issue with mine and the same router, can not quiet figure out what is going on.
Just quick update i just did an update on my router and it seems to connect completely fine
For those who have router issues, check for a firmware update! Most routers have a few updates while sitting on the shelf. I used to always update and properly configure routers (with out the software disc) for customers at my old job and we rarely had problems of customers bribing it back. And throw out the disc that comes with the router. The software can cause headaches down the road. All security settings can be done inside the router through any web browser and router IP.
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Connects to my linksys ea6500 5ghz ac just fine link speed around 400 mbps
Sent from my HTC One using XDA Premium HD app
Added an Airport Express, and 5ghz works fine from that...
cq_ said:
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Click to expand...
Click to collapse
Prefers 2.4
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
Correct. The 2.4 GHz network should travel further. Its all about that sweet sweet 5 GHz speed though! Mine connects to my Asus RT-AC66U router just fine.
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
no preferred option?
godfirst said:
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
doxy-LS said:
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
Click to expand...
Click to collapse
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
godfirst said:
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Well I want to be able to use the 2.4 GHz networks when available, so I'll leave it on auto. I guess the speed isn't a huge deal when the wireless connection is so much faster than my internet connection.
And yes, I know that there are lots of differences between stock & custom ROMs (my last phone was a Nexus S & I was always changing ROMs). What I meant to ask was if there was a difference with that specific option.
wifi 2.4GHz connection problems
Welcome
I have silver One for 3 weeks now, but it was 2 weeks in service - they reinstalled software and returned phone. No change.
I can't connect to any 2.4 Ghz network (G/N) ending Authentication Error. Only 5GHz works.
I tried it with Netgreat WNDR4700 (Gargoyle custom software), CISCO access point @ work, also random WiFi open networks in shops/malls, etc. Other devices i know and have at home ( Samsung Note II, htc Sensation, Acer Iconia tab, Dell Latitude laptop) works fine. Just the One cosing problems.
I run stock rom, how can I turn on more verbose logging or see what is happening in the Operation system while connecting? I must prove to Regenersis Poland service that my phone does not work. Otherwise they will say phone works within parameters.