Missing 4g modem? - Motorola Droid RAZR

We have 2 droid razrs from Verizon. My phone has been mostly stock with a one time flash to an earlier build of ICS. I have seen gone back to stock and just rooted. We don't go into a 4G area very often, but today I noticed something strange.
The razr I did not flash ICS to has 4g but mine does not. Looking at the about phone screens shows one difference. On the baseband version mine shows CDMA_N_04. 07.01R
The other razr shows that plus LTEDC_U_07. 1F. 00
Is this just a simple RSD perhaps I used Matts utility to go back to 181 or whatever it was a few months ago.
Thanks hope this made sense.
Sent from my DROID RAZR using xda premium

Chances are the baseband was not downgraded.
Check out this thread:
http://forum.xda-developers.com/showthread.php?p=25443969#post25443969
Most importantly the link that is enclosed in the thread:
http://forum.xda-developers.com/showthread.php?t=1624965
EDIT: links fixed

Nothing against Matt's utility, I find it very useful, and it works wonderfully in most cases... however nothing can replace a full RSD back to stock... I believe the utility skips a lot of things that RSD does... the utility is only meant to return system to stock, as to where a full RSD returns everything to stock... my only advice is load up the fastboot files into RSDlite and complete a full RSD before going any further... make sure to read all directions to do so and make doubly sure you have at least 80% battery before attempting a full RSD.
Sent from the cutting edge of my RAZR

devistator18 said:
Chances are the baseband was not downgraded.
Check out this thread:
http://forum.xda-developers.com/show...9#post25443969
Most importantly the link that is enclosed in the thread:
http://forum.xda-developers.com/show....php?t=1624965
Click to expand...
Click to collapse
Thanks, but your links aren't working. In the meantime I'm off to download RSD and the files needed to that.

Defiant79 said:
Thanks, but your links aren't working. In the meantime I'm off to download RSD and the files needed to that.
Click to expand...
Click to collapse
Oops, guess I should have checked the links. They are fixed now.

devistator18 said:
Oops, guess I should have checked the links. They are fixed now.
Click to expand...
Click to collapse
Thanks, can't believe that didn't come up in my search. Maybe something from searching on the XDA app.
I'm off to RSD now.

Related

[Q] Was told not to update

Hello everyone!
Just bought the photon yesterday and have a question about updating the software. I was told by the gentlemen not to update(On 45.2.5 now) because if I did I would not be able to use WIFI. Says that the update would break it. Has anyone ran into this? I've looked around and haven't really seen any mention of it.
Any help would be great!
This is the first time I'm hearing of this. Those store reps are clueless when it comes to phones lol. It won't break your wifi.
Lancerz said:
This is the first time I'm hearing of this. Those store reps are clueless when it comes to phones lol. It won't break your wifi.
Click to expand...
Click to collapse
I'm gonna go ahead and trust you BC your an Atlantan like me lol
Well I tried to update and it failed!
pastert33 said:
I'm gonna go ahead and trust you BC your an Atlantan like me lol
Well I tried to update and it failed!
Click to expand...
Click to collapse
1) What system version are you on?
2) What happened during the update?
3) Is your phone completely stock (you have not modded it in any way)?
4) If necessary, you can push the latest update via RSD Lite v5.5
Good luck!
K
KTT16 said:
1) What system version are you on?
2) What happened during the update?
3) Is your phone completely stock (you have not modded it in any way)?
4) If necessary, you can push the latest update via RSD Lite v5.5
Good luck!
K
Click to expand...
Click to collapse
System version is 45.2.5
It rebooted and then said system update failed.
I did the one click root
Not sure how to do the update via RSD
Sent from my MB855 using XDA App
http://forum.xda-developers.com/showthread.php?t=1202666
You gotta use that for the latest update via RSD, rooting it won't get you updates. And whoever told you that updating would break your WIFI was a dolt. It actually fixes most of the WIFI issues people were having. I've attached the 5.5 version of RSD so you don't have to hunt it down. Just follow the instructions in the thread I linked above and you should be golden. :]
xTMFxOffshore said:
http://forum.xda-developers.com/showthread.php?t=1202666
You gotta use that for the latest update via RSD, rooting it won't get you updates. And whoever told you that updating would break your WIFI was a dolt. It actually fixes most of the WIFI issues people were having. I've attached the 5.5 version of RSD so you don't have to hunt it down. Just follow the instructions in the thread I linked above and you should be golden. :]
Click to expand...
Click to collapse
The problem I have is the step 6
6. Load up the SBF file you extracted from the MR download
What does that mean? Seems simple but don't remember extracting an SBF file
pastert33 said:
The problem I have is the step 6
6. Load up the SBF file you extracted from the MR download
What does that mean? Seems simple but don't remember extracting an SBF file
Click to expand...
Click to collapse
You need to extract the zip file you downloaded from the link xTMFx provided (contains the 198_7 SBF)...you open this SBF file in RSD Lite, connect your phone to the computer after putting it in RSD mode, and hit START.
KTT16 said:
You need to extract the zip file you downloaded from the link xTMFx provided (contains the 198_7 SBF)...you open this SBF file in RSD Lite, connect your phone to the computer after putting it in RSD mode, and hit START.
Click to expand...
Click to collapse
Ahh I downloaded the deotexed one and not the original so I didn't see a sbf file. Downloading now, will report back
I put my phone in RSD mode, how do I get it outta the mode or is it ok for it the stay this way until the download is done?
pastert33 said:
Ahh I downloaded the deotexed one and not the original so I didn't see a sbf file. Downloading now, will report back
I put my phone in RSD mode, how do I get it outta the mode or is it ok for it the stay this way until the download is done?
Click to expand...
Click to collapse
Once RSD lite has done it's thing, the phone will reboot, or you will have to manually reboot (it's a soft brick, just pull the battery if necessary).
Best,
K
I generally have had to pull my battery then reboot manually. But works just fine for me.
Sent from my Photon via XDA
Ok, finally got it updated! Def isn't like the EVO, could flash it in like a couple minutes! Now think I'm gonna unlock the bootloader
Looking to flash a custom rom and an oc kernel?
Yea i actually just got done setting up my phone after flashing the joker rom with the OC kernal. Really impressed!
xTMFxOffshore said:
Looking to flash a custom rom and an oc kernel?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Yeah that is the one to go with as it is fast and has the oc kernel included. Plus tis built off the latest build.
Sent from my Photon via XDA

Help! I bricked my Photon!

YET ANOTHER UPDATE 1/9/2012:
MAJOR SUCCESS VIA THE FOLLOWING LINK: http://forum.xda-developers.com/showpost.php?p=21015556&postcount=6
THIS IS ACTUALLY A US CELLULAR SBF FLASH BUT I SUCCESSFULLY FLASHED THAT FILE TO MY PHOTONSTEIN AND MANAGED TO GET BOOTED ALL THE WAY INTO THE ANDROID/GOOGLE SETUP WIZARD.
NOW I AM ATTEMPTING TO FLASH A SPRINT 198_7 SBF.
UPDATE 1/9/2012:
I RECENTLY PURCHASED A EVO 3D FROM CRAIGSLIST TO REPLACE MY PHOTON. THEREFORE, I WILL KEEP MY PHOTON AS A LAB MOUSE TO TRY TO GET A HEART BEAT BACK INTO IT. THANKS FOR ALL THE EFFORT TO EVERYONE! I WILL KEEP THIS THREAD UPDATED UNTIL I EITHER GET MY "PHOTONSTEIN" WALKING AGAIN OR BURRIED IN THE BONE YARD WHICHEVER COMES FIRST.
UPDATE! I have had successful communication with the photon through android-sdk. I don't however have the correct img file to flash to the phone. Does anyone have any ideas?
Okay, I know I am somewhat of a newbee at this. But I followed all the steps and wound up with a brick. All I get is "Failed to boot 3" then "Starting RSD mode".
I tried flashing the "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf" and it fails telling me that it failed to re-enumerate.
Am I screwed or does anyone have a suggestion?
Thanks.
try flashing the 198_7 sbf on rsd 5.5
Sent from my MB855 using XDA App
Jmaserang said:
try flashing the 198_7 sbf on rsd 5.5
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Thanks, I'm downloading now. I will repost if successfull.
treetolber said:
Okay, I know I am somewhat of a newbee at this. But I followed all the steps and wound up with a brick. All I get is "Failed to boot 3" then "Starting RSD mode".
I tried flashing the "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf" and it fails telling me that it failed to re-enumerate.
Am I screwed or does anyone have a suggestion?
Thanks.
Click to expand...
Click to collapse
You may wish to consult this thread and completely read/watch everything.
http://forum.xda-developers.com/showthread.php?t=1250697
You may also want to reinstall the drivers for your photon. I had the same problem and a quick driver reinstall fixed it.
It appears that I have either damaged or deleted the bootloader. Sprint won't touch it with a 10 foot pole. Does anyone know how to get the bootloader back to the device?
I am able to connect to it with RSD Lite but I can't flash anything.
treetolber said:
It appears that I have either damaged or deleted the bootloader. Sprint won't touch it with a 10 foot pole. Does anyone know how to get the bootloader back to the device?
I am able to connect to it with RSD Lite but I can't flash anything.
Click to expand...
Click to collapse
Are you still getting "starting RSD mode"?
If you are, I think you're safe. I guess you're one of the many of us who flashed 2.3.5 pudding into their Photons. If that's the case you can follow a small tutorial i did here:
http://forum.xda-developers.com/showpost.php?p=21015556&postcount=6
Give it a shot and let me know how it goes.
You shouldn't need the bootloader at all actually. I had the same issue with my phone. I had to remove the SIM card and the SD card. Then when you put the battery back in Hold down the Power button and the Volume up button until it says RSD lite mode or something along those lines. Then connect it to your computer and run the RSD lite and select the proper factory ROM that you need to install back on your MOPHO. You will lose root access but your phone should be right back to all of the factory settings. I have done this multiple times to fix error that I got because I am new to Rooting my device and everything as well. I will give you links to where I was able to find some addition support as well.
http://forum.xda-developers.com/showthread.php?t=1373135
http://forum.xda-developers.com/showthread.php?t=1202666
If all else fails call sprint and ask for an advanced exchange from tech support
Sent from my MB855 using XDA App
treetolber said:
Okay, I know I am somewhat of a newbee at this. But I followed all the steps and wound up with a brick. All I get is "Failed to boot 3" then "Starting RSD mode".
I tried flashing the "1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf" and it fails telling me that it failed to re-enumerate.
Am I screwed or does anyone have a suggestion?
Thanks.
Click to expand...
Click to collapse
Where do you find build 154 for the photon?
Sent from my Nexus S 4G using Tapatalk
Has anyone had their photon just show the pulse Motorola logo and the power cycle it self back to the same screen?
Sent from my Nexus S 4G using Tapatalk
Wow there's been a **** ton of threads with "bricked" in the titles lately what are you guys doing lol.
Also not to be a douche but this isn't development. This thread should be in general or q&a next time.
I had the boot loop prob pwr+vol down get to stock recovery and wipe the phone worked for me
Sent from my MB855 using XDA App
TheGman125 said:
Where do you find build 154 for the photon?
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
I'm not sure. I followed a link somewhere in the threads on this forum.
firtermish said:
Are you still getting "starting RSD mode"?
If you are, I think you're safe. I guess you're one of the many of us who flashed 2.3.5 pudding into their Photons. If that's the case you can follow a small tutorial i did here:
http://forum.xda-developers.com/showpost.php?p=21003839&postcount=9
Give it a shot and let me know how it goes.
Click to expand...
Click to collapse
Well now my battery is dead and I don't have any way of charging it unless I take it to a Sprint store and have them charge it over night.
Thanks for all the help!
treetolber said:
Well now my battery is dead and I don't have any way of charging it unless I take it to a Sprint store and have them charge it over night.
Thanks for all the help!
Click to expand...
Click to collapse
You can cut the end off of a charger strip the wires red on pos+ black on neg- and plug it in but don't leave it on longer than 20 min at a time cuz battery might over heat
Sent from my MB855 using XDA App
I can start the flash process but after a while the following message appears on the screen of the Photon: "sec_exception: b655, eddt, eb".
Then the flas process out and displays the following:
"Failed flashing process. Phone(000): Phone did not re-enumerate after RAM-downloader was sent. (0x703E); phone connected.
Has anyone seen this and recovered from it?
P.S. This is all with or without the SIM card and SD card inserted or removed.
TheGman125 said:
Where do you find build 154 for the photon?
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
ShabbyPenguin has critical photon files hosted (and linked in his signature)
Photon Files
Download RSD Lite and 198_7 SBF from.
http://www.holylivingfuck.com/ACS/SBFs/
You should read this thread on more information about 198_7
http://forum.xda-developers.com/showthread.php?t=1202666
Make sure you have proper USB drivers for OS 64 or 32 bit installed, install RSD lite and follow the directions below.
Make sure your battery is greater than 50percent before doing any of this.
1) Fire off RSD lite, select the SBF you need 198_7 .
2) Hold down power and vol up till RSD mode comes up
3) Plug into usb then start the flashing sequence.. ( the whole process will take a while)
4) The process is done when RSD lite says manually power up the phone.. You may need to take the back off and pull the battery to restart it incase it doesnt power up on its own.
I wonder if you downloaded an incomplete sbf. Try flash 198-7sbf one more time or see if you can enter android recovery and wipe. Also. Check the motorola driver is installed correctly.
Sent from my Motorola Photon using XDA App

[Q] Anyone have a good, comprehensive guide for noobs?

been looking around on xda and also other forums and keep finding bits and pieces of things to do when such-an-such happens, but nothing that is a total guide for noobs... specifically where to download RSD lite and how to use it, and also a guide for how to use mattlgroff's utility which I believe can be used in place of RSD lite. would sure be nice of someone to put something like this together for us noobs to the razr!!! thanks guys... if i ever completely figure all this out, i'll be happy to do it! =)
in_dmand said:
been looking around on xda and also other forums and keep finding bits and pieces of things to do when such-an-such happens, but nothing that is a total guide for noobs... specifically where to download RSD lite and how to use it, and also a guide for how to use mattlgroff's utility which I believe can be used in place of RSD lite. would sure be nice of someone to put something like this together for us noobs to the razr!!! thanks guys... if i ever completely figure all this out, i'll be happy to do it! =)
Click to expand...
Click to collapse
Did you check the developer sections? Many posts on how to things. Also might be a little different if you gsm or cdma. Some say boot stap but I use safe strap.
http://forum.xda-developers.com/showthread.php?t=1526113&highlight=safestrap
http://forum.xda-developers.com/showthread.php?t=1391900&highlight=safestrap
From safe strap. Install what Rom says such as wipe data,cache,dalvik then install Rom from sd card.
Basically tells you how but if you have specific questions ask.
blueis300 said:
Did you check the developer sections? Many posts on how to things. Also might be a little different if you gsm or cdma. Some say boot stap but I use safe strap.
http://forum.xda-developers.com/showthread.php?t=1526113&highlight=safestrap
http://forum.xda-developers.com/showthread.php?t=1391900&highlight=safestrap
From safe strap. Install what Rom says such as wipe data,cache,dalvik then install Rom from sd card.
Basically tells you how but if you have specific questions ask.
Click to expand...
Click to collapse
so where do I get rsd lite and how do I use it with regard to the fastboot files?
Check out this guide:
http://forum.xda-developers.com/showthread.php?t=1539192
in_dmand said:
so where do I get rsd lite and how do I use it with regard to the fastboot files?
Click to expand...
Click to collapse
Oops had the other link to but posted wrong.
I'd LOVE to see a step-by-step guide on installing webuntu (webtop ubuntu).. <3
in_dmand said:
been looking around on xda and also other forums and keep finding bits and pieces of things to do when such-an-such happens, but nothing that is a total guide for noobs... specifically where to download RSD lite and how to use it, and also a guide for how to use mattlgroff's utility which I believe can be used in place of RSD lite. would sure be nice of someone to put something like this together for us noobs to the razr!!! thanks guys... if i ever completely figure all this out, i'll be happy to do it! =)
Click to expand...
Click to collapse
Ttry out zedomax in youtube.com
There you'll find a lot of razr, android and others tutorials.
Thanks!
Sent from my XT910 using Tapatalk
You could try my blog if it helps!
Link is in the signature.
Nikorasu said:
Check out this guide:
http://forum.xda-developers.com/showthread.php?t=1539192
Click to expand...
Click to collapse
Thanks! I think this is my answer for the recovery part!
See my channel on youtube
youtube.com/theazrguy
I have everything that every noob needs for razr
therazrguy said:
See my channel on youtube
youtube.com/theazrguy
I have everything that every noob needs for razr
Click to expand...
Click to collapse
thanks, but I didn't see anything about fixing a soft bricked phone....
the main reason I want to know this now is because I would like to flash more/different roms, and I know some don't play well with safestrap (which is what I have). So, if I have to remove safestrap, go back to stock, install and use bootstrap, there is a chance I could brick it. Would be nice to already have all this figured out so I won't have to go w/out my phone for a few days =D.
Right now its rooted w/ the razrx ROM on 748 (i believe).
Aashrey99 said:
You could try my blog if it helps!
Link is in the signature.
Click to expand...
Click to collapse
thanks! It does help... =) BUT, I don't understand when you say "Extract the Fastboot Image from the .zip and into a folder." I looked in the RAZRX rom and did not find any file named "fastboot" ... more on this?
therazrguy said:
See my channel on youtube
youtube.com/theazrguy
I have everything that every noob needs for razr
Click to expand...
Click to collapse
not everything.... could u do a vid on how to use RSD and recover from a bootloop/softbrick? that would be sweet!
in_dmand said:
not everything.... could u do a vid on how to use RSD and recover from a bootloop/softbrick? that would be sweet!
Click to expand...
Click to collapse
It's really simple. I read that you manage to get into fastboot mode so the rest is even easier. Make sure you have downloaded the correct fastboot files for your phone, then:
1) Download Fastboot file.zip
2) Unzip to a folder.
3) Run RSD Lite
4) Make sure battery is fully charged and it is connected to your pc.
5) Under model, port bla bla, status, it should say connected if not you need to install moto drivers from my previous post.
6) Click the button beside file name which says "..." then choose the xml file from the folder you unzipped earlier.
7) Press Start and pray hard.
in_dmand;23865277 a guide for how to use [URL="http://forum.xda-developers.com/showthread.php?t=1526113" said:
mattlgroff's utility[/URL] which I believe can be used in place of RSD lite.
Click to expand...
Click to collapse
well his program is pretty much simplified for noobs also makes it easier on everyone else. Just plug and play (type the number that correspond to the action you want), easy 'nuff
in_dmand said:
thanks, but I didn't see anything about fixing a soft bricked phone....
the main reason I want to know this now is because I would like to flash more/different roms, and I know some don't play well with safestrap (which is what I have). So, if I have to remove safestrap, go back to stock, install and use bootstrap, there is a chance I could brick it. Would be nice to already have all this figured out so I won't have to go w/out my phone for a few days =D.
Right now its rooted w/ the razrx ROM on 748 (i believe).
Click to expand...
Click to collapse
You could try some articles in my blog.
try these out
http://aashrey99razr.wordpress.com/roms/working-with-cwm-recovery/installation/
http://aashrey99razr.wordpress.com/disaster-recovery/
http://aashrey99razr.wordpress.com/roms/how-to-flash/
There are more articles, but I guess these would help with soft brick recovery and ROM installation.
I hope this helped.
in_dmand said:
thanks, but I didn't see anything about fixing a soft bricked phone....
the main reason I want to know this now is because I would like to flash more/different roms, and I know some don't play well with safestrap (which is what I have). So, if I have to remove safestrap, go back to stock, install and use bootstrap, there is a chance I could brick it. Would be nice to already have all this figured out so I won't have to go w/out my phone for a few days =D.
Right now its rooted w/ the razrx ROM on 748 (i believe).
Click to expand...
Click to collapse
I think If i change the name of video, "How to upgrade/downgrade motorola razr xt910" to "how to fix soft brick, upgrade,downgrade motorola razr xt910" then you will see.
I think you dont know about unbricking ur device currently so, that's why you didn't see that in my channel.
---------- Post added at 02:24 PM ---------- Previous post was at 02:22 PM ----------
in_dmand said:
not everything.... could u do a vid on how to use RSD and recover from a bootloop/softbrick? that would be sweet!
Click to expand...
Click to collapse
I already have a video on how to unbrick the device.
I will change the name right now.

[Q] return to stock,please help!!!!!!!!!!

hi all,i have been trying to return to 1.73 using matts dru,i keep getting this message after selecting 1 in the dru,"files\moto-fastboot'is not recognized as an internalor external command,operable program,or batch file,i am using a razr xt912 rooted with the moto-fail exploit,what am i doing wrong or missing?
Did you dl the lite or full version? I can't remember the errors I got, but I tried reflashing to .173 using the lite version, which doesn't come with the fastboot files.
n8w said:
Did you dl the lite or full version? I can't remember the errors I got, but I tried reflashing to .173 using the lite version, which doesn't come with the fastboot files.
Click to expand...
Click to collapse
forgive my noobness,but full or lite versions of what?
djerk said:
forgive my noobness,but full or lite versions of what?
Click to expand...
Click to collapse
Of Matt's app.
cheekrox said:
Of Matt's app.
Click to expand...
Click to collapse
weird,ipulled matts dru off xda,there is no mention of a paid version,some forums say i need safestrap installed on my phone and p.c, links anyone
djerk said:
weird,ipulled matts dru off xda,there is no mention of a paid version,some forums say i need safestrap installed on my phone and p.c, links anyone
Click to expand...
Click to collapse
There is no paid version of his utility. Are you in fastboot ap mode on your phone when you try to use his utility?
Sent from my DROID RAZR using Tapatalk 2
yes i'm in ap fastboot mode,i downloaded 2 versions of dru one is a 7-zip file which i can't open on my pc even though i downloaded the program to do it ,i don't know what type of file the other version is got it from matts xda post,it opens and runs but again i get the script saying files\moto-fastboot ect...when i first tried to root using doomlord it installed the bionic bootstrapper the root didn't take so i uninstalled the bootstrapper and rooted using motofail i don't have any boot or safe strap installed,please someone help me i want to be ready when ics rolls out,.......
I'd suggest going back to Matt's thread, and going through a few pages as there is an updated version. I think it's also posted at another razr forum. Delete the versions you have just to eliminate any confusion. You may also just want to use RSD. It took me a few tries to get the right fastboot file, but once I did I just had to ota to .173 then to .181.
n8w said:
I'd suggest going back to Matt's thread, and going through a few pages as there is an updated version. I think it's also posted at another razr forum. Delete the versions you have just to eliminate any confusion. You may also just want to use RSD. It took me a few tries to get the right fastboot file, but once I did I just had to ota to .173 then to .181.
Click to expand...
Click to collapse
i think i downloded the newest version of matts utility today,i even created a new user account on my pc incase some other program is interfering,and when i run the utility i still get the same message i wrote about when i started this thread i'm starting to think i'll never get to taste ics when it comes out, maybe matt would help me!
djerk said:
forgive my noobness,but full or lite versions of what?
Click to expand...
Click to collapse
wow if only i would have listened to you sooner,i assumed lite or full version meant paid or free!I was at my wits end yesterday so i emailed matt and while i was reading his response something clicked in the back of my head so i went to matts thread and downloaded the full version which includes the fastboot files and tada i'm now running on the 181 update!now i just have to reroot and restore my apps from titanium and i'll be set,thanks to you and matt and all on xda who tried to help me,if i wasn't so bullheaded and paid attention i'd have had this done weeks ago,now come on ics!!!!!!!!!!

[Q] Have I bricked my razr?

So I had ota ics and using safestrap to run aokp jb 4.2.1. I was messing around in 4636 hidden menu and activated usa band. Searching for a fix didn't help so I figured I could just use rsd lite and re-flash ics. I had long since the first time deleted all the files so I got the ones from sbf droid developers.org. The first I tried had 11 points and failed at 1/11 with a cdt.bin error. Then I got another which ran till 6/xx and then return the same error. The xx is because I didn't notice how many points it had to run through.
Do I have any options?
In rsd lite the device properties are all blank and they have been for both attempts.
Thanks
micnolmad said:
So I had ota ics and using safestrap to run aokp jb 4.2.1. I was messing around in 4636 hidden menu and activated usa band. Searching for a fix didn't help so I figured I could just use rsd lite and re-flash ics. I had long since the first time deleted all the files so I got the ones from sbf droid developers.org. The first I tried had 11 points and failed at 1/11 with a cdt.bin error. Then I got another which ran till 6/xx and then return the same error. The xx is because I didn't notice how many points it had to run through.
Do I have any options?
In rsd lite the device properties are all blank and they have been for both attempts.
Thanks
Click to expand...
Click to collapse
Looks bricked. Go for a factory cable!!
micnolmad said:
So I had ota ics and using safestrap to run aokp jb 4.2.1. I was messing around in 4636 hidden menu and activated usa band. Searching for a fix didn't help so I figured I could just use rsd lite and re-flash ics. I had long since the first time deleted all the files so I got the ones from sbf droid developers.org. The first I tried had 11 points and failed at 1/11 with a cdt.bin error. Then I got another which ran till 6/xx and then return the same error. The xx is because I didn't notice how many points it had to run through.
Do I have any options?
In rsd lite the device properties are all blank and they have been for both attempts.
Thanks
Click to expand...
Click to collapse
That error means you tried to flash an sbf with a lower version than you had on your device.
Make sure the sbf you are using is exactly the same you had running and for the same region.
DROID RAZR with Tapatalk 4
Ok, old thread but mine, so I guess I can revive
I can't seem to get a hold on the same ota that I had. Anyone here who knows where to get it?
Thanks
micnolmad said:
Ok, old thread but mine, so I guess I can revive
I can't seem to get a hold on the same ota that I had. Anyone here who knows where to get it?
Thanks
Click to expand...
Click to collapse
OTA's only work once if phone is stock.
Android version can't be downgraded.
What are you trying to do?
As I said in OP, I was messing with stuff I didn't understand. I got the factory cable and also one of the old sbf files. I have checked that the one I have is for UMTS but it is still in CDMA mode. It just will not switch bad to UMTS mode.. I was using the wrong android version when I did this the first time but it is now flashed and working. Only problem is the radio thinks it is CDMA..
micnolmad said:
As I said in OP, I was messing with stuff I didn't understand. I got the factory cable and also one of the old sbf files. I have checked that the one I have is for UMTS but it is still in CDMA mode. It just will not switch bad to UMTS mode.. I was using the wrong android version when I did this the first time but it is now flashed and working. Only problem is the radio thinks it is CDMA..
Click to expand...
Click to collapse
Which device do you have XT912, XT910, XT908...
Sent from my XT912 using Tapatalk
---------- Post added at 07:37 PM ---------- Previous post was at 07:29 PM ----------
micnolmad said:
As I said in OP, I was messing with stuff I didn't understand. I got the factory cable
Click to expand...
Click to collapse
Factory cable for what?
does AP fastboot mode say battery low?
and also one of the old sbf files.
Click to expand...
Click to collapse
.sbf is an old Motorola file format that has not been used since the Droid X2 MB870, the prefered term for stock motorola firmware is FXZ or .xml
same issue
mine xt910 is bricked. its official 2.3.5 . i just need an official working rom to boot up. pls upload any for me. thanks
SwayMontana said:
mine xt910 is bricked. its official 2.3.5 . i just need an official working rom to boot up. pls upload any for me. thanks
Click to expand...
Click to collapse
2.3.5? Android version?
See the index for the firmware version for your carrier and region
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT912 using Tapatalk
sd_shadow said:
Which device do you have XT912, XT910, XT908...
Click to expand...
Click to collapse
XT910 EU, cant remember but Scandinavian region.
Factory cable for what?
does AP fastboot mode say battery low?
.sbf is an old Motorola file format that has not been used since the Droid X2 MB870, the prefered term for stock motorola firmware is FXZ or .xml
Click to expand...
Click to collapse
Factory cable for power. The phone had been unpowered for a year.
Term or not, I was just referring to the file extension. All these oem abbreviations, meh. I wouldn't even know if it was one or the other. It was listed as a sbf, so that's what I called it
But thanks replying. The is working now. I guess it must have been the right radio after all. Thanks anyway
Sent from my HTC One using XDA Free mobile app

Categories

Resources