Here's what happened:
1. Original firmware was Froyo 2.2.1 S5830DXKC1.
2. Flashed to official Gingerbread 2.3.4 S5830DXKPB with Odin 4.38.
3. Rebooted into recovery and wiped cache, data.
4. Rebooted phone and started as normal.
So I off it and tried switching on, failed, nothing happened, just black screen.
Also fails at starting in recovery mode.
However I tried and was able to do these:
- While connected to USB, went into 'Downloading' mode.
- While connected to USB, went into recovery mode.
- Went into Ramdump mode without USB.
It only boots when connected to USB, and fails without it.
Did I installed a wrong firmware?
Kernel: 2.6.35.7.perf-CL514579
Baseband: S5830DXKPB
Try rebooting in recovery mode .
May I know which variant of the S5830 are you using ?
This was sent from a Galaxy Ace. Problem?
EmoBoiix3 said:
Try rebooting in recovery mode .
May I know which variant of the S5830 are you using ?
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
Which variant means?
Its a 2nd hand phone.
I can go into recovery only while connected to usb.
sounds like a bad flash, try flasing via odin again?
stupotty1210 said:
sounds like a bad flash, try flasing via odin again?
Click to expand...
Click to collapse
Yes I've flashed it back to Froyo and it boots as normal.
Its only after I've flashed with other firmwares, it wont boot without USB connected.
Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
Having recently installed a miui rom, i found that my phone has become brocked. I can go to dwonload mode, and I can turn it on but there is only a blank screen. Does anyone know how to unbrick it?
Thanks
go into download mode open up ODIN and flash a stock ROM. Simple as that.
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
nikkox988 said:
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
He said he can access Download mode which means he can flash a stock ROM and all will be good.
I can't seem to go into recovery mode
thealmightysaj said:
I can't seem to go into recovery mode
Click to expand...
Click to collapse
to get recovery get into download mode open Odin and flash CF-Root Kernel and then try to get into download mode that way.
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
thealmightysaj said:
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
Click to expand...
Click to collapse
are you flashing it through PDA? Just checking I didnt on accident once. Also try just flashing a stock ROM.
http://forum.xda-developers.com/showthread.php?t=1224423
onli flashing pda wont work i thinkk... you may need to repartition
go to http://androidflip.com/android-2-3-4-gingerbread-xxkg3-firmware-update-for-samsung-galaxy-s2/
flash it by repartitioning
download the package in it. it worked for me
Where can I find the stock ROM for a Bell Samsung GS2?
try samfirmware.com
they have all of the official released firmwares based on geographical region.
or
http://forum.xda-developers.com/showthread.php?t=1075278
I have unbricked my phone but i can't access the android market, everytime time i open up the app it closes
my t-mobile galaxy s2 is dead after ICS upgrade failed
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
If you can't get into download mode (home/power/volume down), only thing you can try before you send it back to Samsung or get it JTAG repaired is a jig, which unfortunately is unlikely to work. Still worth a try tho.
hbarri said:
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
Click to expand...
Click to collapse
Try uploading a stock kernel first, then try uploading the rom
Do we have to have a jig?
Help me fix my fully bricked i9100
I have flashed the wrong Roms and firmwares in my Samsung galaxy s2 i9100 for several times now my phone doesnt go to the recovery mode. It only goes to the download mode but re flashing the correct new roms and firmwares, nothing actually works! I tried those
Odin shows only FAIL !! when I flash new roms..I ve tried so many roms so far but it only fails
what do I do now??
Try http://sammobile.com for the firmware.
Sent from my GT-I9100 using Tapatalk 2
Samsung Galaxy S2 SPH-D710
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
XraidedX2 said:
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
Click to expand...
Click to collapse
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your sock rom again using samfirmware.com
6.Done
Today, while my phone was in my pocket, it rebooted itself and stuck at boot screen of galaxy s2. I didn't make any changes on the phone, it was running good. What can cause a problem like that ? I have some pics and videos on internal memory of the phone, i also don't want to lose them.
Thats what i tried :
* Download mode
I tried to re-install stock kernel to phone using odin, but odin didn't see the phone using usb cable. So i've failed to install new kernel, or any non-wipe firmware.
*Also tried recovery mode
Done a cache-wipe, the phone still crashes on boot screen.
Umutcan said:
Today, while my phone was in my pocket, it rebooted itself and stuck at boot screen of galaxy s2. I didn't make any changes on the phone, it was running good. What can cause a problem like that ? I have some pics and videos on internal memory of the phone, i also don't want to lose them.
Thats what i tried :
* Download mode
I tried to re-install stock kernel to phone using odin, but odin didn't see the phone using usb cable. So i've failed to install new kernel, or any non-wipe firmware.
*Also tried recovery mode
Done a cache-wipe, the phone still crashes on boot screen.
Click to expand...
Click to collapse
When you say re-install stock kernel, did you flash another kernel?
Odin is not detecting your phone? Nothing showing up in ID:COM when you connect your phone in download mode?
I installed the latest nightly build (cm_galaxys2_full-88.zip) on my phone yesterday night and restored the all the apps through Titanium Backup. Everything was working fine until this morning I tried to create a backup using CWM recovery in Rom Manager. The phone shut down and has since been stuck on the initial boot screen (one with the Samasung galaxy S2 logo). It does not boot into recovery mode using the button combinations. I can only get it into download mode but Odin does not recognize it as I thing i forgot to enable USB debugging.
I have tried removing the battery and rebooting and also tried to access it through odin a number of times. But nothing seems to work.
What am I missing here ?
This might help?
mjondj said:
I cannot boot into recovery, but I can boot into download. However, odin is no longer recognizing my GS2 when I plug it into my PC.
The bootloop began when I was attempting to flash the cyanogen7 with the google apps.
I read every post in this thread, and have seen a number of people who cant boot into recovery, but can boot to download. I haven't seen anyone else mention that their phone is no longer recognized by odin on their pc.
Please help.
edit:
Perhaps odin doesn't see my phone because I didn't have USB debugging enabled? if that's the case, what can I do?
------------------------------------------------------------------------------------------------------------------
solved:
heimdall overwrites a driver and stops odin from seeing your phone. i attempted to remove it, unsuccesfully. but loaded odin onto a different computer (that had never seen heimdall).
i booted into download, connected to 2nd pc w/ odin, and ran CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.tar (search forum) in PDA. this made my phone bootable again.
Click to expand...
Click to collapse
also check that you dont have kies running on your pc
icecreampop3 said:
This might help?
also check that you dont have kies running on your pc
Click to expand...
Click to collapse
Thanks. Although that did not do what I expected it to (due to some license issues), but it got me into recovery mode from where I could restore a Nandroid backup. Am back on RevolutionROM for now. Looks like CyanogenMod will have to wait for me.
I experienced the very same thing for the first time today. Had checkrom revolution and ran rom manager to backup and am now unable to boot into recovery/download. Will try to hook it to odin then
I was going to wipe data via twrp in my tab 4.but suddenly i wipped system too, and when i reboot it went to bootloop. I tried to go into recovery mode but couldn't and also it is not getting in download mode. I tried all but it just power on and hangs in logo. And when i plug in pc via usb while hanging in logo pc recognise my device also odin does recognise. I think after wipping system i wiped whole rom of my device and i think it is empty. So what is the problem can i recover it? It happend just two days ago.
sherlyghee said:
I was going to wipe data via twrp in my tab 4.but suddenly i wipped system too, and when i reboot it went to bootloop. I tried to go into recovery mode but couldn't and also it is not getting in download mode. I tried all but it just power on and hangs in logo. And when i plug in pc via usb while hanging in logo pc recognise my device also odin does recognise. I think after wipping system i wiped whole rom of my device and i think it is empty. So what is the problem can i recover it? It happend just two days ago.
Click to expand...
Click to collapse
Try to flash your phone back to stock with odin or SmartSwitch , and later if is everything fine try to find stable twrp recovery image.
Can i do that without download mode?
sherlyghee said:
Can i do that without download mode?
Click to expand...
Click to collapse
As I know you can't but if you are unable to enter in Download mode using combination keys you can use JIG USB in order to get into Download mode.
Where can i get jig usb? How much does it cost?
sherlyghee said:
Where can i get jig usb? How much does it cost?
Click to expand...
Click to collapse
You can look on Ebay
https://www.ebay.com/sch/i.html?_fr...0.TRC0.H0.Xjig+usb.TRS0&_nkw=jig+usb&_sacat=0
or AliExpress
https://www.aliexpress.com/af/jig-u...SB_20171213210820&origin=n&catId=0&isViewCP=y
Is not expensing at all , but I'm not sure if will work on your device , but you can try .
Good Luck