NFC not detecting anything? - Sprint HTC EVO 4G LTE

my EVO 4G LTE won't detect any tags or devices. My nexus S 4G and friends galaxy nexus work fine with each other and my paypass credit card tag. Anybody else have this issue? I'm on stock rom + root. Hoping my hardware isn't defective. I did take the shiny black cover off to check that the antenna contacts look normal...

tmuka said:
my EVO 4G LTE won't detect any tags or devices. My nexus S 4G and friends galaxy nexus work fine with each other and my paypass credit card tag. Anybody else have this issue? I'm on stock rom + root. Hoping my hardware isn't defective. I did take the shiny black cover off to check that the antenna contacts look normal...
Click to expand...
Click to collapse
I was having a problem with NFC n my gfs nexus and I had to put my top by her bottom and was kind of soso at detecting it I don't know if its a sw problem or if its hardware...
Sent from my EVO using xda premium

ckoadiyn said:
I had to put my top by her bottom and was kind of soso
Sent from my EVO using xda premium
Click to expand...
Click to collapse
That never works

dmacias said:
That never works
Click to expand...
Click to collapse
Lmao
Sent from my EVO using xda premium

Hah! Yes, been there done that with the NFC jokes the evolte NFC antennae is under the shiny part, I lined it up with the middle of the ns4g which is where that antennae is... anybody else have this issue?

tmuka said:
Hah! Yes, been there done that with the NFC jokes the evolte NFC antennae is under the shiny part, I lined it up with the middle of the ns4g which is where that antennae is... anybody else have this issue?
Click to expand...
Click to collapse
Would beep n then not let you do nething
Sent from my EVO using xda premium

No, not even a beep or popup or anything... and before somebody asks, yes, NFC is enabled in settings

tmuka said:
No, not even a beep or popup or anything... and before somebody asks, yes, NFC is enabled in settings
Click to expand...
Click to collapse
I see my beeped a few times but wasn't consistant even with our cases off..
Sent from my EVO using xda premium

ckoadiyn said:
I see my beeped a few times but wasn't consistant even with our cases off..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Bummer, I'd be happy with even a beep!

Ok just making sure lol is it on?(;
Stupid thing to ask but hey it happens to the best of us sumtimes lol

Yeah, I'm not sure if mine is working either. I've tried it at a few checkouts, but it never does anything. And I don't have any other device with nfc to check it with.
May have to stop by best buy and check it with their demo phones or something.

-Cupper- said:
Ok just making sure lol is it on?(;
Stupid thing to ask but hey it happens to the best of us sumtimes lol
Click to expand...
Click to collapse
Yep, I double checked again, even tried toggling off and on a few times...
bernechad said:
Yeah, I'm not sure if mine is working either. I've tried it at a few checkouts, but it never does anything. And I don't have any other device with nfc to check it with.
May have to stop by best buy and check it with their demo phones or something.
Click to expand...
Click to collapse
If you have a credit or debit card with paypass (NFC tag) you can install the NFC tag info app from the market to test with...

I tested today with two friend's EvoLTEs, and both of their phones had NFC that worked with each other, but not with my phone. Looks like it must be my hardware. Guess i'm headed back to Best Buy for an exchange. I will RUU and try again first just in case...

Listen, the EVO 4G LTE NFC antenna is behind the back top glossy cover. The SGS2 NFC is on the battery. So, that is why you need to put the back top half of the EVO LTE over the lower back side of the other phone.

I've found that if you're trying to use nfc for checkout it's easiest to already be in google wallet, but all that's required is for the screen to be on.
for other apps like beaming a webpage to another phone, hold them together, they'll buzz, then tap the screen on the one you want to transmit.
some apps don't support nfc beaming, like gallery.
as always, make sure settings are enabled in "settings/more"

I dunno if you have a case on or not but according to Google wallet support hard rubbery cases weaken the signal while hard plastic cases work but it's best to go naked while using it.
Sent from my EVO LTE using Tapatalk 2

thanks for the replies. yeah, i don't use any case, I prefer the thinness! After my RUU back to stock this morning i still can't get any NFC connections to happen, so i'm headed back to best buy for an exchange today...

Best Buy replaced my phone today and now NFC works as expected! It was funny when I talked to the "mobile manager" and told him my NFC wasn't working and he asked me "What is NFC." yeah... regardless of his knowledge-ability of technology, he did give me a no hassle exchange and out the door in under a half hour, which is lightning fast in my experience in that store...

Related

antenna gate as sentation?

Hi guys,i,v just see in some Italian site that the sensation has a bad antenna gate issue,i,m very afraid for my future evo 3d, can any body confirm it ?
refer to this thread
http://forum.xda-developers.com/showthread.php?t=1112444
sick of this now.... its ridiculous
jessejames111981 said:
refer to this thread
http://forum.xda-developers.com/showthread.php?t=1112444
Click to expand...
Click to collapse
thanks my friend
sick of this now.... its ridiculous
Click to expand...
Click to collapse
I will buy this fantastic device anyway ,but i would like don,t have this issue certainly
No way to know yet because the back is different on the EVO 3D versus the Sensation. The Sensation has a partial metal backing, from my understanding, the EVO 3D is all plastic with a coating of some type.
crabjoe said:
No way to know yet because the back is different on the EVO 3D versus the Sensation. The Sensation has a partial metal backing, from my understanding, the EVO 3D is all plastic with a coating of some type.
Click to expand...
Click to collapse
ok,but does not depend on whether the shell and put it or not but ,where is installed on the cover.
put your hand on the top back of your evo in a medium coverage area and watch it drop a bar.
put your hand on the lower half of your phone with low wifi signal and watch it cut it.
I've been around cell phones along time, they all do it.
the biggest issue is more in poor placement, as in putting it where most everyone holds there phone.
Alanmw86 said:
put your hand on the top back of your evo in a medium coverage area and watch it drop a bar.
put your hand on the lower half of your phone with low wifi signal and watch it cut it.
I've been around cell phones along time, they all do it.
the biggest issue is more in poor placement, as in putting it where most everyone holds there phone.
Click to expand...
Click to collapse
I just tried as you say with my touch pro 2, and this does not happen at all
I never said touch pro 2, either way I'm certain you can do it on a touch pro 2 as well as long as you cover where the antenna is, you can do it to any antenna in the world guys, come on...seriously, who in there right minds thinks you can cover a receiver and NOT affect its reception? some may be more measurable than others, but like i said it all has to do with convenience of placement.
oh and BTW I've done it on a touch pro 2 as well. but I for the life of me can't remember what part of the phone the antenna is at.
The antenna is on the top quarter of the touch pro 2, from the speakerphone button and up. It says so in the manual.
babak said:
I just tried as you say with my touch pro 2, and this does not happen at all
Click to expand...
Click to collapse
Did you have poor reception to start off?
Sent from my PC36100 using Tapatalk
This
nosfanatic2006 said:
Did you have poor reception to start off?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
nosfanatic2006 said:
Did you have poor reception to start off?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
I,v just tried it ,and have a good reception,any problem.
It only really affects the phone if you have poor reception. So you wont notice it otherwise.
But yes it happens to all phones... people just bashed the Iphone for it because that area that caused it is in a place that you would cover by normally holding your phone.
Babak! Chetori agha?
Sent from my GT-P7510 using XDA Premium App
bobdude5 said:
Babak! Chetori agha?
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
mokhlesim

Google wallet going by the wayside?

http://www.androidpolice.com/2012/0...ed-touch-google-wallet-now-left-high-and-dry/
If this happens it will be interesting.
Sent from my EVO using xda premium
I expect it to be like all the other carrier garbage that's out there. That being said the Sprint Zone app on this phone is actually decent.
Sent from my EVO using Tapatalk 2
can i get my free $10 direct deposited before wallet goes under?
lol
Kcarpenter said:
I expect it to be like all the other carrier garbage that's out there. That being said the Sprint Zone app on this phone is actually decent.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Prolly the carrier stuff hasn't even took affect yet tho has it?
Sent from my EVO using xda premium
Google wallet isn't exactly taking off. There seems to be new issues with it all the time.
Could this be the real reason Wallet doesn't work on the EvoLTE?
This whole payment via a phone is ridiculous. I've commented a few times about it. I was shaking my head when I read a few people was returning phones cause wallet wasn't working. NFC might have a future but the future won't be in payments. I'm just glad I used up my $10.
Sent from my EVO using XDA
shook187 said:
This whole payment via a phone is ridiculous. I've commented a few times about it. I was shaking my head when I read a few people was returning phones cause wallet wasn't working. NFC might have a future but the future won't be in payments. I'm just glad I used up my $10.
Sent from my EVO using XDA
Click to expand...
Click to collapse
payment via phone if ******* awesome.
-Cupper- said:
payment via phone if ******* awesome.
Click to expand...
Click to collapse
I kind of have to agree
Sent from my EVO using xda premium
-Cupper- said:
payment via phone if ******* awesome.
Click to expand...
Click to collapse
What is so awesome about it besides it being a new technology and a few tech geeks on here considerin it the second coming of christ. It's just another way for someone to take a small percentage of a sale.
Sent from my EVO using XDA
ckoadiyn said:
I kind of have to agree
Sent from my EVO using xda premium
Click to expand...
Click to collapse
The look on peoples faces! And it's just super cool
shook187 said:
What is so awesome about it besides it being a new technology and a few tech geeks on here considerin it the second coming of christ. It's just another way for someone to take a small percentage of a sale.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Go bish somewhere else.
Sprints mobile payment is listed in the sprint zone app but when you tap it it just loops into page it never finds. Seems like it's a place holder for now.
My phone is rooted unlocked and when I open google wallet it initializes sets up my account but says I have to enable nfc to continue. It's already enabled so I can't get past that part. I really wanted that 10 bucks...
Sent via XDA Premium
I'd love to see a day where my phone is all I need. I could just leave the wallet at home.
Sent from my EVO using xda premium
fpineda101 said:
Sprints mobile payment is listed in the sprint zone app but when you tap it it just loops into page it never finds. Seems like it's a place holder for now.
My phone is rooted unlocked and when I open google wallet it initializes sets up my account but says I have to enable nfc to continue. It's already enabled so I can't get past that part. I really wanted that 10 bucks...
Sent via XDA Premium
Click to expand...
Click to collapse
Sprint mobile wallet? It downloaded a apk here
Sent from my EVO using xda premium
payment by phone is great.
dont have to fumble with cards or touch those nasty card pin machines.
brb, swipe and go everywhere.
i think the problem is that not alot of places utilize this nfc yet.
its still a very much immature technology
shook187 said:
This whole payment via a phone is ridiculous. I've commented a few times about it. I was shaking my head when I read a few people was returning phones cause wallet wasn't working. NFC might have a future but the future won't be in payments. I'm just glad I used up my $10.
Sent from my EVO using XDA
Click to expand...
Click to collapse
I felt the same way when I first heard about it. After seeing it and using it I have to say that I feel very differently about it. It's a cool idea and very convenient to have all your coupons and loyalty cards in there and automatically applied as you make your purchase. That being said, Isis is the system that will probably win out in the end.
fpineda101 said:
Sprints mobile payment is listed in the sprint zone app but when you tap it it just loops into page it never finds. Seems like it's a place holder for now.
My phone is rooted unlocked and when I open google wallet it initializes sets up my account but says I have to enable nfc to continue. It's already enabled so I can't get past that part. I really wanted that 10 bucks...
Sent via XDA Premium
Click to expand...
Click to collapse
Im not rooted atm, but I had this same problem when it WAS working right for the LTE. Im sure you already tried it, but simply powering off the phone, and turning it back on allowed me to enable NFC and Android Beam properly.
Traceamount said:
Im not rooted atm, but I had this same problem when it WAS working right for the LTE. Im sure you already tried it, but simply powering off the phone, and turning it back on allowed me to enable NFC and Android Beam properly.
Click to expand...
Click to collapse
That worked, thanks! Now it just sirs at activating account. I'm gonna try that build prop hack later unless there is something else I need to do
Ckoadiyn can you share the sprint mobile wallet apk?
Sent via XDA Premium
now will ISIS need any other special hardware? If it wins, will us sprint people be able to use it?
I just downloaded the app, added all my card info and seems like it is active...
Also received this text from sprint:
"SprintMW- Congratulations! You've created a Wallet Account, you can use this wallet at Scentiments "
Only downside I see its limited to only a few retailers...
Sent from my EVO using XDA

NFC payment

This might be a stupid question but so be it. I have an otterbox case on my LTEVO and will the case interfere when trying to make a payment? I don't want to to look stupid trying to make a payment and taking the case off the phone because the little machine couldn't detect the phone/NFC payment or chip or whatever it is.
Sent from my EVO using xda premium
KL45SiiK said:
This might be a stupid question but so be it. I have an otterbox case on my LTEVO and will the case interfere when trying to make a payment? I don't want to to look stupid trying to make a payment and taking the case off the phone because the little machine couldn't detect the phone/NFC payment or chip or whatever it is.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
You know, I don't think that it should, but since the nfc wire thing is in the battery and not in the phone itself I would kinda think that the case itself can interfere with the connectivity of the NFC chip. I guess you just have to try out sorry
-KR_Connect-
Stupid question? Hell, I still can't figure out how to tell if a store supports NFC payments. And I keep hearing talk of NFC tags,...what the hell does that mean?! How that for stupid question. ?
Sent from my EVO using xda premium
scottspa74 said:
Stupid question? Hell, I still can't figure out how to tell if a store supports NFC payments. And I keep hearing talk of NFC tags,...what the hell does that mean?! How that for stupid question. ?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Anyone correct me if I'm wrong but AFAIK it should work wherever you see pay pass. The symbol/icon kind of looks like the WiFi icon on its side.
Sent from my EVO using xda premium
KL45SiiK said:
Anyone correct me if I'm wrong but AFAIK it should work wherever you see pay pass. The symbol/icon kind of looks like the WiFi icon on its side.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
this.
scottspa74 said:
Stupid question? Hell, I still can't figure out how to tell if a store supports NFC payments. And I keep hearing talk of NFC tags,...what the hell does that mean?! How that for stupid question. ?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Nfc tags... http://forum.xda-developers.com/showthread.php?t=1673440
Sent from my EVO using xda premium
I have the otterbox commuter on mine and NFC works great.
Sent from my HTC Evo LTE
It works fine with the defender. Ali except google wallet, of course...
Sent from my EVO using xda app-developers app
krobinso2295 said:
You know, I don't think that it should, but since the nfc wire thing is in the battery and not in the phone itself I would kinda think that the case itself can interfere with the connectivity of the NFC chip. I guess you just have to try out sorry
-KR_Connect-
Click to expand...
Click to collapse
Antenna isn't in the battery on this phone, it's under the shiny plastic piece at the top.
Sent from my EVO using Tapatalk 2
I just tried it, not as fast as I thought and it didn't work. I had to wake my phone, put it on the atm/credit machine, it then asked for pin, then it just hung on the animated WiFi logo... I just swiped my credit card instead...using cruzerlite case.
Sent from my EVO LTE.
KL45SiiK said:
This might be a stupid question but so be it. I have an otterbox case on my LTEVO and will the case interfere when trying to make a payment? I don't want to to look stupid trying to make a payment and taking the case off the phone because the little machine couldn't detect the phone/NFC payment or chip or whatever it is.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Just used mine at McDonalds this morning with the case on.
Sent from my EVO using Tapatalk 2
I used mine at rite aid today, didnt work at first but the reason was, because the clerk has to switch it to credit or what not. It wont just work at some places, you have to tell them, "credit please". An usually you will hear something on their side and it will tell you to swipe card, then you just tap your phone.
I have a Seidio’s ACTIVE case and it works great.
Had no problem using mine at McDonald's but messed up the first time I tried it by not holding the phone on the card reader long enough. Once I realized that it works flawlessly.
Sent from my EVO using xda app-developers app
It definitely doesn't work with all systems that accept paypass. It requires the correct software on the retailers side as well. For example...I went to The Container Store (which fully supports Google Wallet) and tried using my phone. It would beep and my phone would acknowledge that something happened, but it their side couldn't process it. Exact same thing happened at Banana Republic....who also supposedly accepts Google Wallet. I think this will be corrected as time goes on and it's not so "new" anymore though.

Another rezzy down....

Well after receiving 3 clnr rezounds for signal problems my current one I believe has a bad proximity sensor. I was on the phone with Verizon today for a while and the tech offered to replace it with a incredible 4g or a razor. Now I know there is like zero development for the Inc and close to that for the razor so my question is what would ya'll do? Or would I be better off trying another rezzy? I do like this phone besides all the problems I've had.
Thanks for your input XDA
Sent from my ADR6425LVW using Tapatalk 2
snow580 said:
Well after receiving 3 clnr rezounds for signal problems my current one I believe has a bad proximity sensor. I was on the phone with Verizon today for a while and the tech offered to replace it with a incredible 4g or a razor. Now I know there is like zero development for the Inc and close to that for the razor so my question is what would ya'll do? Or would I be better off trying another rezzy? I do like this phone besides all the problems I've had.
Thanks for your input XDA
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
ID take the Dinc 4G. They have CM 10.1 over there
snow580 said:
Well after receiving 3 clnr rezounds for signal problems my current one I believe has a bad proximity sensor. I was on the phone with Verizon today for a while and the tech offered to replace it with a incredible 4g or a razor. Now I know there is like zero development for the Inc and close to that for the razor so my question is what would ya'll do? Or would I be better off trying another rezzy? I do like this phone besides all the problems I've had.
Thanks for your input XDA
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Quit returning working phones. Quit looking at your bars. That is what I would do. The proximity sensors for our phones can be adjusted. Play store app called Rezound Proximity Sensor Calibrator.
Not trying to be rude but I see posts like these all the time where guys have returned 10 phones for various "problems". Interesting when I know of at least 10 people with Rezounds in my group of friends and family and nobody has had to return one.
drynyks said:
Quit returning working phones. Quit looking at your bars. That is what I would do. The proximity sensors for our phones can be adjusted. Play store app called Rezound Proximity Sensor Calibrator.
Not trying to be rude but I see posts like these all the time where guys have returned 10 phones for various "problems". Interesting when I know of at least 10 people with Rezounds in my group of friends and family and nobody has had to return one.
Click to expand...
Click to collapse
it seems to be hit and miss. my first rez i bricked. the "replacement" one i received had a dead headphone jack from factory my latest one VZW had zero adhesive on the top of the screen leading to its death about a week ago. this time VZW said that the screen was my problem and that i would need to go the insurance route. i took it apon myself to repair it and order a new glass and LCD.
i wish i would have never bricked my first one. it was the only one without problems. all replacements from VZW have been crap. :/
synisterwolf said:
all replacements from VZW have been crap. :/
Click to expand...
Click to collapse
That seems to be case with my wife's rezound.
Sent from my Rezound using xda app-developers app
drynyks said:
Quit returning working phones. Quit looking at your bars. That is what I would do. The proximity sensors for our phones can be adjusted. Play store app called Rezound Proximity Sensor Calibrator.
Not trying to be rude but I see posts like these all the time where guys have returned 10 phones for various "problems". Interesting when I know of at least 10 people with Rezounds in my group of friends and family and nobody has had to return one.
Click to expand...
Click to collapse
The problem I was having with signal was lack thereof. The phone would show good signal but I couldn't make phone calls or use my data for a few minutes up to an hour or so. I have three other people with vzw smartphones in my household which would work fine.
The phone I currently have had none of those issues. I've tried the recalibration tools and it didn't work.
Sent from my ADR6425LVW using Tapatalk 2
AshtonTS said:
ID take the Dinc 4G. They have CM 10.1 over there
Click to expand...
Click to collapse
I think I might do that. Do you have the dinc?
I guess I didn't realize that the development was moving forward. The last I've checked there wasn't much going on with it.
Sent from my ADR6425LVW using Tapatalk 2
snow580 said:
The problem I was having with signal was lack thereof. The phone would show good signal but I couldn't make phone calls or use my data for a few minutes up to an hour or so. I have three other people with vzw smartphones in my household which would work fine.
The phone I currently have had none of those issues. I've tried the calibration tools and it didn't work.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
i blame this one the antenna in the back. if i remember correctly my replacements never came with a back i had to reuse them. i think this was the dumbest idea they had.
synisterwolf said:
i blame this one the antenna in the back. if i remember correctly my replacements never came with a back i had to reuse them. i think this was the dumbest idea they had.
Click to expand...
Click to collapse
I never quite understood the reasoning behind that. I couldn't see the benefit of it. A friend has the iPhone 4, I believe he said the chrome piece around the whole phone was the antenna. That's a smart design, exterior antenna that looks good also. But I'm sure if any other manufacturer tried anything similar, lawsuit would arise.
Cursed apple...
Sent from my Rezound using xda app-developers app
sanders539 said:
I never quite understood the reasoning behind that. I couldn't see the benefit of it. A friend has the iPhone 4, I believe he said the chrome piece around the whole phone was the antenna. That's a smart design, exterior antenna that looks good also. But I'm sure if any other manufacturer tried anything similar, lawsuit would arise.
Cursed apple...
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
save space i think. if you ever take apart the phone. there's zero extra room. :/
sanders539 said:
I never quite understood the reasoning behind that. I couldn't see the benefit of it. A friend has the iPhone 4, I believe he said the chrome piece around the whole phone was the antenna. That's a smart design, exterior antenna that looks good also. But I'm sure if any other manufacturer tried anything similar, lawsuit would arise.
Cursed apple...
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Yeah that is strange being my issues were related to the signal. Verizon tech support and I always did lots if trouble shooting before sending a new one out but the never even brought up the back cover as a possible culprit. It would have been a lot cheaper to send one of them out to try versus a new phone.
Well I do have a update on my replacement phone. I called back again and explained to the tech support guy that I do not want a razor and that I really need a screen larger than the Inc. He said ok let me see what I can do and then offered me a Samsung intuition or a LG stratosphere 2 or something like that. Told him probably not cause the sammy had a 4 inch screen and the LG just looked butt ass ugly to me. He the put me on hold again and offered me a razor maxx and again I said I don't like Motorola. Then I brought up the dna and he put me on hold again and came back and said he got that approved for my replacement.
It should be here tomorrow afternoon so I guess we'll see how it performs. I really do dislike changing phones all the time.
Thanks for all your input!!
Sent from my ADR6425LVW using Tapatalk 2
snow580 said:
Well after receiving 3 clnr rezounds for signal problems my current one I believe has a bad proximity sensor. I was on the phone with Verizon today for a while and the tech offered to replace it with a incredible 4g or a razor. Now I know there is like zero development for the Inc and close to that for the razor so my question is what would ya'll do? Or would I be better off trying another rezzy? I do like this phone besides all the problems I've had.
Thanks for your input XDA
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Complain more and get a DNA or Razr HD. Both of those phones are not equal to the rez. Make that fact known.
---------- Post added at 10:09 AM ---------- Previous post was at 10:08 AM ----------
Lol never mind... See you got your DNA.
Pray it has pre OTA software
Phaded said:
Complain more and get a DNA or Razr HD. Both of those phones are not equal to the rez. Make that fact known.
---------- Post added at 10:09 AM ---------- Previous post was at 10:08 AM ----------
Lol never mind... See you got your DNA.
Pray it has pre OTA software
Click to expand...
Click to collapse
Yeah I know that they are not and all I want for a phone on a plan that I pay a lot of money for is one that I do not have trouble with every couple months. The dna does seem to be pretty solid from what I've seen.
I sure hope it does too. Which I will have to wait a little longer to see since I received another Rezound (with a new back cover I might add) in the mail yesterday Now I have to wait for the tech that helped me Wednesday night to call me back and see what happened.
Sent from my ADR6425LVW using Tapatalk 2
snow580 said:
Yeah I know that they are not and all I want for a phone on a plan that I pay a lot of money for is one that I do not have trouble with every couple months. The dna does seem to be pretty solid from what I've seen.
I sure hope it does too. Which I will have to wait a little longer to see since I received another Rezound (with a new back cover I might add) in the mail yesterday Now I have to wait for the tech that helped me Wednesday night to call me back and see what happened.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
if it does come with OTA, only real option right now is pay 45 bucks for JTAG. Numerous people have successfully had it done.
Phaded said:
if it does come with OTA, only real option right now is pay 45 bucks for JTAG. Numerous people have successfully had it done.
Click to expand...
Click to collapse
What is JTAG? I've been reading that it pretty much impossible to gain root with the new OTA.
Sent from my ADR6425LVW using Tapatalk 2
I forgot to mention that the tech support guy called me today and confirmed that it was a mistake on his end and that he will be sending the dna right away.
Sent from my ADR6425LVW using Tapatalk 2
snow580 said:
What is JTAG? I've been reading that it pretty much impossible to gain root with the new OTA.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Don't know exactly... I just know it involves opening the phone up, hooking the phone up to a riff box and it s-off it... Probably Google it for better description

Charger port cover

Hey guys. My phone is about two Months old our so and my charger port cover is already not staying shut good. I'm thinking about getting a wireless charging setup, but was trying to avoid it because of the cost. Anyone else having this issue?
Also what wireless setups is everyone running?
Sent from my SM-G900T using XDA Free mobile app
Well thats not good.
No, not great. Any ideas?
jjlean said:
No, not great. Any ideas?
Click to expand...
Click to collapse
http://www.ebay.com/itm/Original-OE...er_Cell_Phone_Accessories&hash=item20e64bc56a
How do you even install this ? Just wondering for future reference hopefully not anytime soon...... But does the thing that hold it in place just gets pushed in there ? how will you take the old one out ? Or do you have to take the whole phone apart, Making the phone not being waterproof anymore which basically will be pointless since that is the whole point of this lol
gdmlaz said:
How do you even install this ? Just wondering for future reference hopefully not anytime soon...... But does the thing that hold it in place just gets pushed in there ? how will you take the old one out ? Or do you have to take the whole phone apart, Making the phone not being waterproof anymore which basically will be pointless since that is the whole point of this lol
Click to expand...
Click to collapse
You have to take out 1 screw from the back. Thats it.
aooga said:
You have to take out 1 screw from the back. Thats it.
Click to expand...
Click to collapse
Thing is do I want to get a new one every two months?
Sent from my SM-G900T using XDA Free mobile app
jjlean said:
Thing is do I want to get a new one every two months?
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Well no, but what other choice do you have? The bright side is it's only $5. I mean, the only other option is to get a wireless charging sticker (which breaks the water resistance anyway), or a real samsung wireless charing back cover. Both are more expensive than just replacing this flap every 2-3 months. I'm pretty disappointed in Samsung if this is truly the case though.
aooga said:
Well no, but what other choice do you have? The bright side is it's only $5. I mean, the only other option is to get a wireless charging sticker (which breaks the water resistance anyway), or a real samsung wireless charing back cover. Both are more expensive than just replacing this flap every 2-3 months. I'm pretty disappointed in Samsung if this is truly the case though.
Click to expand...
Click to collapse
Same here...
You have a point.
Sent from my SM-G900T using XDA Free mobile app
aooga said:
You have to take out 1 screw from the back. Thats it.
Click to expand...
Click to collapse
Just actually took a look at the phone and you are correct so not that bad kind of annoying but at least is an easy fix let me save the link for the port cover just in case I need it in the future lol
gdmlaz said:
Just actually took a look at the phone and you are correct so not that bad kind of annoying but at least is an easy fix let me save the link for the port cover just in case I need it in the future lol
Click to expand...
Click to collapse
I hope I won't need to replace it though. A $700 phone shouldn't need the user to replace a part every 2-3 months. The GS1 (att captivate) had a sliding door that never broke in 3 years of use. Maybe samsung should have done that.
aooga said:
I hope I won't need to replace it though. A $700 phone shouldn't need the user to replace a part every 2-3 months. The GS1 (att captivate) had a sliding door that never broke in 3 years of use. Maybe samsung should have done that.
Click to expand...
Click to collapse
I just bought a replacement.... we'll see.
Sent from my SM-G900T using XDA Free mobile app
jjlean said:
I just bought a replacement.... we'll see.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Just to let you know, tmobile would have replaced it, but don't go that route. They send refurbished phones that are more than likely to have more problems than your original phone.
aooga said:
Just to let you know, tmobile would have replaced it, but don't go that route. They send refurbished phones that are more than likely to have more problems than your original phone.
Click to expand...
Click to collapse
Yea, I don't want a refurb. I have done that before with them and it was ok, but my phone was a year old. This one is too new!
Sent from my SM-G900T using XDA Free mobile app
jjlean said:
Yea, I don't want a refurb. I have done that before with them and it was ok, but my phone was a year old. This one is too new!
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
How many people are having this issue? Sure hope mine isn't problematic like this. I'm getting an OtterBox Preserver case so i might just remove that cover to make it easier to plug in the charger plug. but then again, if the case were to ever fail, it would be nice to have that extra protection guarding the device.
elesbb said:
How many people are having this issue? Sure hope mine isn't problematic like this. I'm getting an OtterBox Preserver case so i might just remove that cover to make it easier to plug in the charger plug. but then again, if the case were to ever fail, it would be nice to have that extra protection guarding the device.
Click to expand...
Click to collapse
So far, there's been 2 reports. One in this thread (obviously), and one in the accessories section. I've only had mine for about a month, so I guess that's why my flap is still fine. Hopefully it will stay fine though.
I found this for you guys. I'm definitely downloading this YouTube video for later use. I always seem to find youtube videos that have been removed when i actually need them lol
https://www.youtube.com/watch?v=hSAiAgCf8XA
2 Months Old
jjlean said:
Hey guys. My phone is about two Months old our so and my charger port cover is already not staying shut good. I'm thinking about getting a wireless charging setup, but was trying to avoid it because of the cost. Anyone else having this issue?
Also what wireless setups is everyone running?
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Mine is already broken off.
letsgotowawa said:
Mine is already broken off.
Click to expand...
Click to collapse
When you say broken off, it's actually detached from the phone or just loose?
aooga said:
When you say broken off, it's actually detached from the phone or just loose?
Click to expand...
Click to collapse
What a bad design. The phone is barely two months old
Sent from my SM-G900T using XDA Free mobile app

Categories

Resources