Hi guys, i have looked everyway but still couldnt find solution to my X10 mini 's problem. Please help me!
I managed to root and install xrecovery on my x10 mini(elcair) with flashtool. Took the next step and tried to install CWM recovery, and use it to run miniCM6.
After the white sony ericsson logo disappeared, the blue android with the spinning light appeared, but now it seems get stuck here.
I tried using PC companion to restore my phone, but when my phone go into flashmode, there's a windows pop-up saying the USB driver failed to install and USB device cannot be recognized. Tried using flashtool but it doesnt work either. When i tried charging the phone with the charger, the green LED light did not light up too. I was wondering whether its hardware or software problem. Anyone faced similar problem before or knows what can i do next?
Welcome to Xda!!
Make sure you have installed the drivers for the phone. If you are using win7 it shouldnt be a problem as it searches for the drivers and does find it.
For winXP, install flashtool; After installation, go to C:/flashtool/drivers and run the file; it will install the drivers.
Keep the forum posted
cheers
Related
I was following the exact step-by-step guide here:
http://forum.xda-developers.com/showthread.php?t=1196808
and after I flashed the kernel downgrade, unplugged USB, power up the phone and immediately plug in after the vibrate, I never got the message in the next step that says "Connected Device: X10", and the "Root" button on the flash tool never became available.
Now my phone is permanently stuck at the "Sony Ericsson" black screen, it won't even turn off. I checked device manager and there are 2 hardware without any drivers. one of them says "Modem Device on High Definition Audio Bus", and the other says "SM bus controller". Does this have anything to do with my problem?
I'm running Win XP SP3, I tried to let it automatically search for drivers but it didn't find anything. I went to:
http://forum.xda-developers.com/showthread.php?t=1193066
and downloaded those drivers, but have no idea how to use them. Tried to use device manager to look for drivers in the downloaded folder and it doesn't recognize anything.
What now? At this point I don't care if I can still root my x10 or not, I just want to fix it so I can use it again. I tried PC Companion but it won't even recognize my phone, keeps telling me to enable USB when I can't even get past the SE screen.
You should try flashing a new ftf firmware bundle, then try the steps again.
ok finally fixed... had to use a friend's computer who is running win7 and actually automatically installed the drivers. everything went as explained on the guide... I guess the guide is not win xp friendly then
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
Hello, I´ve searched for solution of my problem all day, but cannot find way to solve that..
I have xperia PRO MK16i and I wanted to update it on Jelly Bean with Pacman Custom ROM. But in recovery mode, when I was updating, it suddenly aborted.. it wrote something with "status 7, update aborted" ...and now I can´t do anything with it, phone doesn´t boot and it´s stucked in SONY logo..
So I wanted to return back to previous firmware (ICS 4.0.4) via flashtool, but I have another problem.. when I plug the device in fastboot mode, pc doesn´t recognize it and flashtool is always showing that window with process that I should power off device, plug usb cabel into pc with fastboot mode.. device has blue led next to hdmi port, but regardless of it nothing happens...
I installed SDK manager with hope I can repair it but still have the same issue... adb drivers don´t seem to work..
Every help will be appreciated.. btw, sorry for my english, I´m not from english speaking country, but I hope u understand my problem :/
PS: have windows 8 (x64) on my laptop
pilli_sk said:
Hello, I´ve searched for solution of my problem all day, but cannot find way to solve that..
I have xperia PRO MK16i and I wanted to update it on Jelly Bean with Pacman Custom ROM. But in recovery mode, when I was updating, it suddenly aborted.. it wrote something with "status 7, update aborted" ...and now I can´t do anything with it, phone doesn´t boot and it´s stucked in SONY logo..
So I wanted to return back to previous firmware (ICS 4.0.4) via flashtool, but I have another problem.. when I plug the device in fastboot mode, pc doesn´t recognize it and flashtool is always showing that window with process that I should power off device, plug usb cabel into pc with fastboot mode.. device has blue led next to hdmi port, but regardless of it nothing happens...
I installed SDK manager with hope I can repair it but still have the same issue... adb drivers don´t seem to work..
Every help will be appreciated.. btw, sorry for my english, I´m not from english speaking country, but I hope u understand my problem :/
PS: have windows 8 (x64) on my laptop
Click to expand...
Click to collapse
Probably its some Windowsish mess. I would try other operating system, you can download live CD for any linux and try to run it there. Should work like charm.
Hi everybody,
first let me say thank you to this incredible community that saved my phones many times.
I received an xperia neo mt15i that is bricked. When I turn on the sony logo appear..after xperia logo and restart in loop mode. I don't know anything about what have done the last owner but I suppose he tried to change rom and made some mistakes. I tried many guides with flashtool, with emma, with update service..but nothing works. The point is that the phone is not recognised when I've to connect to start the process. If I press the back button when I'm connecting the cable a green light turn on (blue with menu botton) but is not recognised. What I can do?
Thank you very much!
P.s.: Sorry for my English !
Are ADB drivers correctly installed on your pc ?
Have you tried with another phone ?
I think that could be. I've downloaded the flashtool and in the folder drivers I started the program flashtool-drivers and installed all the drivers (just in case ) it's correct? I've to do other thinks ?
Dagh said:
I think that could be. I've downloaded the flashtool and in the folder drivers I started the program flashtool-drivers and installed all the drivers (just in case ) it's correct? I've to do other thinks ?
Click to expand...
Click to collapse
cant be windows 8
I'm using xp so I don't think. Few weeks ago I installed the adb drivers for a lenovo p770..maybe I've to uninstall it?
Hello
I'm trying to get new software to my Sony Xperia E3 but computer can't see my phone in flashmode.(Fastboot is ok)
When I normally turn on a phone I can see boot screen (Sony, Xperia) and it stay on this.
I can see green light on phone but computer can't see it.
I'm using sony mobile flasher by Androxyde.
How I can solve this?
So, let's resume in correct terms:
-You tried to flash something using Odin but your computer does not detect your device.
-Now you got into a bootloop.
Is that correct?
No. Phone restarted by itself, started loading android and turned off.
It's everything.
Hello
if u are using windows 8 you must disable verification and then reinstall drivers
also try reinstalling drivers from the folder in the /flashtool/drivers folder
make sure you are not using a 3.0 usb port, it causes many issues.
Good luck!