I unlocked my bootloader, installed CWM and wiped to install jokersax's cm9. I got stuck at my red M logo. I decided to wipe (dalvik cache, cache, data. Also format /system and /cache) and recover from my backup.
Since then I've been getting the bootloop. Please, does anyone have any tips for me?
I've haven't seen someone with the same problems, sorry if I missed something.
Repaired!!! Thank you for visiting!
I repaired the problem by flashing with RSD-lite and the Bell stock sbf for 2.3.6
Sorry about the unnessecary thread.
I hope this helps anyone else in the same position.
Thanks for visiting! I appreciate your time!
Related
I've formatted everything on my eris using ClockWorkMod Recovery v2.5.0.1. When i say everything i mean: /boot, /system, /data, /cache, and the sdcard. I did this because i kept getting stuck on the three skateboarding androids screen after trying to do the dual boot thing from ADX. Anyways, my question is whether or not i am still able to load a ROM and if someone could help with that.
Your help will be greatly appreciated
Thanks
emnetashenafi said:
I've formatted everything on my eris using ClockWorkMod Recovery v2.5.0.1. When i say everything i mean: /boot, /system, /data, /cache, and the sdcard. I did this because i kept getting stuck on the three skateboarding androids screen after trying to do the dual boot thing from ADX. Anyways, my question is whether or not i am still able to load a ROM and if someone could help with that.
Your help will be greatly appreciated
Thanks
Click to expand...
Click to collapse
I think it's a little extreme to format every thing on the phone but that being said have you tried putting a rom back on to the sd card and attempting to flash it? Does it give an error?
I guess formatting everything was the answer because doing a wipe + dalvik wipe wasn't enough the other times. Its working now that I have KaosFroyo v39 on it. Thanks for your help.
Hello, I have a noob question that might have been answered, How ever i cannot find any thing on here or the web. So if any one can help please let me know.
The problem: Rooted and unlocked bootloader. Flashed CM7 nightly 15 got infinite loop splash screen, So i re-wiped all catches and cleared system and tried fresh install through cwm recovery 4.0.1.4 and now all that will pop up is Moto start screen. I can still access recovery and had a friend charge my battery. I have no clue on why things are not working. Again I apologize if this has been answered before. If any one can help I would greatly appreciate it!
Att ATRIX
Sincerly,
NOOB
ProtoManV said:
Hello, I have a noob question that might have been answered, How ever i cannot find any thing on here or the web. So if any one can help please let me know.
The problem: Rooted and unlocked bootloader. Flashed CM7 nightly 15 got infinite loop splash screen, So i re-wiped all catches and cleared system and tried fresh install through cwm recovery 4.0.1.4 and now all that will pop up is Moto start screen. I can still access recovery and had a friend charge my battery. I have no clue on why things are not working. Again I apologize if this has been answered before. If any one can help I would greatly appreciate it!
Att ATRIX
Sincerly,
NOOB
Click to expand...
Click to collapse
Flash RomRacer's latest CWM Recovery (in dev section). Boot into fastboot and fastboot -w, upon reboot enter Recovery, factory reset/wipe data, wipe cache partition & wipe dalvik cache. Flash CM7, then wipe cache partition & dalvik again before rebooting... report back.
That worked great, thank you very much!!!!
Sent from my MB860 using xda premium
I've taken on a bit more than qualified I guess as I rooted my att GS3 just fine and flashed a new aokp rom and was up and running but started to have intermitent flickering. It prompted me to reflash rom with CM10 and this is were my problems began. I wiped data/factory reset, cache partition,Dalvik cache, mounts & storage format cache, and accidentally format emmc which I think is my problem. I was able to still reboot to CWM recovery but I can't do much more than that, and now I can't get to CWM recovery mode at all. Have tried to boot and reflash from ex/sdcard no good. PC doesn't recognize phone to do recovery from backup and I didn't do internal backup which I now know was dumb. Is there anything I can do to get back up and running or did I screw myself and have to get a new phone? PLEASE HELP HELP HELP!!!!!!!!!
Post on attention gs3 forums more help
Sent from my HTC Vision using xda app-developers app
I've taken on a bit more than qualified I guess as I rooted my att GS3 just fine and flashed a new aokp rom and was up and running but started to have intermitent flickering. It prompted me to reflash rom with CM10 and this is were my problems began. I wiped data/factory reset, cache partition,Dalvik cache, mounts & storage format cache, and accidentally format emmc which I think is my problem. I was able to still reboot to CWM recovery but I can't do much more than that, and now I can't get to CWM recovery mode at all. Have tried to boot and reflash from ex/sdcard no good. PC doesn't recognize phone to do recovery from backup and I didn't do internal backup which I now know was dumb. Is there anything I can do to get back up and running or did I screw myself and have to get a new phone? PLEASE HELP HELP HELP!!!!!!!!!
Buddy... first your phone is ATT GS3. and this forum is for INTERNATIONAL GS3. so if you flashed the rom downloaded from THIS forum than might be possible... the correct forum for your device is here:
http://forum.xda-developers.com/forumdisplay.php?f=1705
I hope and pray your phone will be ok... I love this device...
hy i make nandroid backup of stock 4.1.1 rom and than install omega rom, and when i want to restore that it says:error while restoring /system!
so can someone help me*!*
Im new to rooting so dont take my word as gospel,
but the EXACTLY THE SAME thing happened to me in the wee hours of this morning (my post would have been same wording as yorus had I made one lol), I had to do a battery pull as after I tried to reboot and got stuck on the bootloader
So I battery pulled, booted in recovert, did a factory reset, wiped cache, wiped delvik cache and just installed the ROM file from the ZIP again and it worked Dandy.
I was worried as I didnt bother asking for any help from the forums.. but it worked like a charm for me
I do hope that helps..