I bought SGS2 GTi1900g a few weeks ago, and it came with GB 2.3.7. A day after i purchased the phone, i rooted it and installed it with ICS 4.0.3 if im not mistaken and i rooted it as well.
Just now, i decided to flash Darkyrom HD... after i read some info about it.
This is the thread link - http://forum.xda-developers.com/showthread.php?t=1544689
The Thread Title - [ROM][ICS][LPQ][ODIN+CWM] DarkyROM HD Base XXLPQ for I9100
So i guess the rom will be compatible with my SGS2 i9100g, and i flashed using Odin3. After that, i flashed the DarkyRom also using Odin...But Odin didnt fully flashed it encounted an error. Since that, i am totally ****Ed UP!! The darkyrom somehow changed my internal to emmc and everything i did to revert will end up with the same error... Error Mount /Emmc! I Tried everything... i think i've even formated my SD... OMFG i lost everything. But i dont want to lost the phone.
What can i do? How can i change the name back to how it was? I believed that is the culprit... unfinisned installation, and internal_card changed to emmc, so every other installations will failed.
Pls ... im so desperate... been doing this for hours its 6.15am already lol i aint go to work if i cant get it booted i had evrything inside it. Jees i shoudnt even bother with this rom so dangerous
PS: Now my sgs2 stucked at samsung galaxy SII start screen with black background, i can enter recovery/download mode but they are useless as i said earlier the name of internalcard has changed to emmc so is it bricked?
ricvai7 said:
I bought SGS2 GTi1900g a few weeks ago, and it came with GB 2.3.7. A day after i purchased the phone, i rooted it and installed it with ICS 4.0.3 if im not mistaken and i rooted it as well.
Just now, i decided to flash Darkyrom HD... after i read some info about it.
This is the thread link - http://forum.xda-developers.com/showthread.php?t=1544689
The Thread Title - [ROM][ICS][LPQ][ODIN+CWM] DarkyROM HD Base XXLPQ for I9100
So i guess the rom will be compatible with my SGS2 i9100g, and i flashed using Odin3. <snip!>
Click to expand...
Click to collapse
Ouch.
Darkyrom is an I9100 ROM, not an I9100G ROM. (read the thread. It says I9100. NOT I9100G.)
I9100G cannot use any I9100, I9100T, I9100P, or I9100M firmwares or ROMs due to the different hardware. (different SoC/CPU/GPU)
If you can get to download mode, try this.
wow thanks pal that was fast
I am reading that thread right now, and downloading the 339mb zip file ..almost finished btw!
I'll let you know the results.
Btw, this is the log from odin when i tried flashing ICS
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ricvai7 said:
wow thanks pal that was fast
I am reading that thread right now, and downloading the 339mb zip file ..almost finished btw!
I'll let you know the results.
Btw, this is the log from odin when i tried flashing ICS
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> [B]I9100G[/B]XXLPQ_[B]I9100G[/B]ODDLP7_[B]I9100G[/B]DDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Well, the good news is that you used a firmware file intended for the I9100G above. If it's still failing as above though, try:
- different USB ports on the computer (no hubs or pass-throughs)
- different USB cable
I'm assuming you for sure have drivers installed? (If you have Kies installed at all, then you should have drivers)
ctomgee said:
Ouch.
Darkyrom is an I9100 ROM, not an I9100G ROM. (read the thread. It says I9100. NOT I9100G.)
I9100G cannot use any I9100, I9100T, I9100P, or I9100M firmwares or ROMs due to the different hardware. (different SoC/CPU/GPU)
If you can get to download mode, try this.
Click to expand...
Click to collapse
Ok i followed the guide in that thread you mentioned.
The file only came with .tar.md5 file, no PIT file or bootloader/csc file.
So i 'odined' the file. Failed!
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDZKL3_I9100GDZKL3_I9100GOLCKL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> MLO
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you try different USB ports and cables, as I said you should?
Also, maybe try this.
ctomgee said:
Did you try different USB ports and cables, as I said you should?
Also, maybe try this.
Click to expand...
Click to collapse
I didn try different cables but i followed the guide you posted step by step.
I downloaded the .pit file, 'odined' it. Download the stock rom, did the same and everything running ok, odin showed the flash was completed!
The phone reboot, and installing apps (1st time boot) .. but i can see somewhere in the lines it says 'error mounting...'
Then it reboot again, voila! i got my GB booting up perfectly! Thanks a million !
That thread should have made stickied
http://forum.xda-developers.com/showthread.php?t=1448765
ricvai7 said:
I didn try different cables but i followed the guide you posted step by step.
I downloaded the .pit file, 'odined' it. Download the stock rom, did the same and everything running ok, odin showed the flash was completed!
The phone reboot, and installing apps (1st time boot) .. but i can see somewhere in the lines it says 'error mounting...'
Then it reboot again, voila! i got my GB booting up perfectly! Thanks a million !
That thread should have made stickied
http://forum.xda-developers.com/showthread.php?t=1448765
Click to expand...
Click to collapse
Glad you got sorted. Do stick to ROMs in the I9100G section from now on, eh?
Related
I'm desperated right now. I Tried to install an original 2.3.4 XWKI1 rom, but in odin, with all options right and yellow icon, the update starts but when will start the rom write appear an error and said FAIL! in red upthere.
I Tried another original rom and the same error. I don't khow what to do. Sorry for the english... i know if have other theads about this, but no one solve my problem.
When i start the phone appears: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
But the kies don't recognize the phone
ODIN ERROR:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_JDI_I9100WBKK1_I9100UHKJ1_I9100JDIKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry if i broken any rules, and HELP ME please!
What model phone have you got?
Eg: I9100
Sent from my GT-I9100 using XDA App
Yeah, GT-I9100
Maybe flashing a firmware with PIT?
with the five files. I Found this in other topic with the same issue:
"I encountered the same problem. And I was able to solved it by flashing it with xxkg6 stock firmware downloaded from sammobile.com.. The file must contain 5 files that includes the pit file. I know most of the thread advised not to touch the pit file but I just did(I took the risk). When I loaded the pit file, it automatically checked the re-partition option.. After 5mins my gs2 has born again.."
If you have Kies loaded at same time/in background close it. You cant flash via ODIN while Kies is running.
i killed all running process from kies... i'll try with a firmware with PIT and check re-partition (XXKG6)
rffslow said:
and check re-partition
Click to expand...
Click to collapse
I wouldn't do that if i were you.
peachpuff said:
I wouldn't do that if i were you.
Click to expand...
Click to collapse
why? i don't see any other solution... i don't know what to do so
Right
I attempted to upgrade to ics last night through Kies, operation failed and phone locked at screen advising need to be redone, have done research and downloaded odin and UK version of firmware but odin keeps failing
Phone is registered with T-mobile in UK
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am becoming rather irritated as dont see any other way of getting phone working again
Any help would be appreciated
Odin and Kies don't play well together. Uninstall Kies and try Odin again.
****Non of this is of any importance. Just chill the f**k out and relax****
Keis removed ands still no joy from Odin - Wife getting a bit paniky now
ilovecheesypuffs said:
Keis removed ands still no joy from Odin - Wife getting a bit paniky now
Click to expand...
Click to collapse
try with a different USB port/cable and see ma8 if the same doesnt wrk then try with a diff computer and check.
ilovecheesypuffs said:
Right
I attempted to upgrade to ics last night through Kies, operation failed and phone locked at screen advising need to be redone, have done research and downloaded odin and UK version of firmware but odin keeps failing
Phone is registered with T-mobile in UK
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am becoming rather irritated as dont see any other way of getting phone working again
Any help would be appreciated
Click to expand...
Click to collapse
When you flash via PC odin don't use .pit file and don't tick repartition (leave all options in odin default). Rom file open as PDA. It should work.
Regards
Sun90 said:
try with a different USB port/cable and see ma8 if the same doesnt wrk then try with a diff computer and check.
Click to expand...
Click to collapse
3 different cables and 5 different ports tried, no other pc in house .
is there nothing else or am i buggered and forever frowned at by my wife for breaking her phone
ilovecheesypuffs said:
3 different cables and 5 different ports tried, no other pc in house .
is there nothing else or am i buggered and forever frowned at by my wife for breaking her phone
Click to expand...
Click to collapse
If you can go into download mode, you can flash another firmware from other regions.
Sent from my potato.
preseodymium said:
If you can go into download mode, you can flash another firmware from other regions.
Sent from my potato.
Click to expand...
Click to collapse
ok bit noobish, i can use say USA i9100 firmware and try that?
ilovecheesypuffs said:
ok bit noobish, i can use say USA i9100 firmware and try that?
Click to expand...
Click to collapse
Yes. So long as it is for your firmware.
Sent from my potato.
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Look for @Hopper8 thread. Great thread lots of info on Odin problems
No Luck!
andrewwright said:
Look for @Hopper8 thread. Great thread lots of info on Odin problems
Click to expand...
Click to collapse
Hi,
I read through and tried flashing with siyah v6 but even that failed.
Not really sure what the issue is!
mosesadarsh said:
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Click to expand...
Click to collapse
Doesnt seem like the phone is charging either!!
Flash philz kernel and then you should be able to get to recovery then flash a custom Rom
Read this bro
http://forum.xda-developers.com/showthread.php?t=2101610&page=2
Hope it helps !!
I tried everything possible but nothing worked. . I got stuck at factoryffs every time then hit xmit data failure. . M sure I hard bricked it now! ! Must be the motherboard. .
can someone please post links to the philz kernel and a stable india version JB firmware !! Please please ... im desperate!!
Search!! Dont be lazy its not hidden or hard to find.
seriously bro?? I found the thread to that kernel but that list is never ending.. God knows which kernel is for my phone!!
Only comment if you have answers please !!!!
All the videos that i watched online show how to install philz kernel on a working phone.
My phone is kinda dead... so what needs to be done after flashing philz kernel? Tell me the next steps please..
Does it still go to download mode? Does odin still see it?
I tried flashing my phone with philz kernel but even that failed...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSK-ODD-4.92.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<OSM> All threads completed. (succeed 0 / failed 1)
Make is easy on your self and flash lss firmwear and flash lss kernel "near the top of download list" chances are you dont have an os now odin has failed to flash. Hooper8 thread has good info on flashing problems! Read that before you try.
Pics clicked a minute back... does this help...
Pls read hooper8 thrsad
Any joy now op?
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
mosesadarsh said:
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
Click to expand...
Click to collapse
Same problem here, my phone was working fine then all of a sudden i noticed it was dead, tried rebooting it, nothing happened, boot loop, tried to access CWM, i got the lower section menu of CWM but nothing else, a black screen with the buttons.
So next i said, let me use odin to flash a new kernel. That failed and ever since that failed, i cannot do anything except enter download mode. If i power the phone on, i get a [phone-problem-computer] image in yellow with text that says somehting like problem loading software, please conntect to kies recovery mode. of course that never works.
And everytime i try to flash absolutely anything on this device, Odin DOES see the device, and the second i press flash/start, when it reacher nand write start, it hangs there, stuck doing nothing.
I took the phone to a friend who has an Riff jtag box, he soldered his jtag to the phone and said the memory chip is not dead, i can read its capacity normally. But when he tried to write to it, it did not work, kept giving him errors, he said he has never encountered such a behavior before. And then i had to leave.
Up to now, my phone is still dead and i have no idea what to do. It only enters download mode, but at the same time, this is useless since flashing anything simply does not work. Anyone knows what the reason could be?
FYI, i was on NeatROM 5.5, which comes with Philz Kernel.
NAND is stuffed/corrupted. How/why - who knows ? Motherboard replacement if you've already tried JTAG. Could be something hardware going on that caused the chip to become 'damaged'.
Hey Guys,
i guess i need your help. I've flashed diffrent ROM's with Odin before so i got an rough idea how it works.
Story so far:
GT-I9100 4.1.2 Official ROM (I9100XWLSD_I9100DBTLS7_DBT) with PhilZ Kernel (PhilZ-cwm6-XWLSD-OXX-4.87).
Phone swithed itself off for any reason and i tried to reboot it. Phone started up and was stuck at the screen with "Samsung Galaxy S II". Nothing happened for like an hour. After waitin i decided to flash the ROM again. And here it just got worse.
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Can anyone help me with this? I'm quite bummed out. I need my phone
Thanks in advance.
Daniel.
i.am.dirt said:
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Click to expand...
Click to collapse
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
immortalneo said:
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
Click to expand...
Click to collapse
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
i.am.dirt said:
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
Click to expand...
Click to collapse
It wouldn't hurt to try then, would it?
Believe me when I say this, but a lot of members have reported this issue before, which led to the creation of the above guide. And its instructions are based to an extent on the successes reported by some members. So try all you can and see what happens! :good:
I've tried to figure it out to what extend different ODIN versions will give different results. Here's what i've been encountered with:
v1.3:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Check MD5.. Do not unplug the cable..
<ID:0/007> Please wait..
<ID:0/007> Checking MD5 finished Sucessfully..
<ID:0/007> Leave CS..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.83:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.85:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
same sh!t here
v3.04:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
what a surprise!
v3.06:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed for any reason
v3.07:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
it doesn't get any better
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
i.am.dirt said:
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
Click to expand...
Click to collapse
Keep trying out everything in that guide and in every possible combinations you can, until you're absolutely sure that your phone's NAND is borked. Then take it to a Service Centre.
Flash a packaged ROM (modem, code & csc) with the 3.06 version.
Sent from...this is not even my S2
i91000 brick at cache
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
milo_sc said:
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
Click to expand...
Click to collapse
i have same problem with my s2. did you fix it ? please reply fast
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
NickSaul said:
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
Click to expand...
Click to collapse
Has anyone tried gastonw's advice yet?
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
justb2 said:
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
Click to expand...
Click to collapse
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
CryserCore said:
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
Click to expand...
Click to collapse
I have the same problem with my s3 neo! I tried to root my phone with Odin , and phone now is bricked. Firat i have installed TWRP , und everything was fine. Than , i tried to flasch superuser to get my phone rooted. Now i can´t reach TWRP (??) , and only thing that i can do ist download mode.
I am tryin to flasch stock firmware through Odin, but ever the same - cache.img error! Help please!
Hi
Please anyone help me
I am also having the same error. It stucks at cache.img. I am trying I9100XWLPT_I9100XXLQ6_I9100XEULPA_HOME.tar.md5 downloaded from sammobile.com
My model is GT-I9100 .
Can anyone help please ?
Earlier , i was having cm-12.1-20151116-SNAPSHOT-YOG7DAO1JN-i9100.zip and one day, it all gone bad. I can only use Odin mode.
I cannot even go to Recovery mode.
I tried boot.bin alone and that runs fine and it shows me Samsung logo screen.
I then tried renaming cache.img to cache.img.tar and that also runs fine .
But overall, it does not run when i think it tries to write to Nand or whatever.
I have tried all version of odin and various cables as well.
Any help will be hugely appreciated.
best regards
I had the same problem.....resolved it by extracting the tar.md5 file to the c:/ directly instead of the desktop...
Yo.
Had the same issue on the GT-I9506.
The issue occurred for me after I had accidentally attempted to flash an auto-root file to bootloader in ODIN, can confirm that flashing CWMR as through PDA solved my issue, as I was then able to flash the same auto-root file direct through PDA.
Hope this helps somebody, as I wasted an hour ****ing around trying to figure out how to fix. ^^
Hello guys. I just made a new account for this problem. I will really really appreciate if u guys help me out, because my parents are gonna kill me if they find out my phone has a fault. So here it is.
A few weeks back i rooted my phone but then snapchat stopped working because of its new policy or something and i decided to unroot the phone. In an act of stupidity i unrooted the phone through SuperSU complete unroot and ignored all the warnings. I know im an idiot (Please help me out folks) Then my phone got stuck on bootloop. I searched it up and found solutions through ODIN and all. So thats what i did. I dowloaded the drivers and downloaded odin. Ran my phone in the downloading mode. Btw i did delete the cache through recovery mode and have already reset it as well through their and nothing happened. So back to the ODIN. I downloaded the firmware, stock one. The problem is i dont know which on to download. Thus far i have downloaded two which are, G920TUVU5EPK5_G920TTMB5EPK5_G920TUVU5EPK5_HOME.tar.md5 and G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5. As seen in the tutorial, i put the phone in download mode and ran odin. There at first the <ID:0/008> Added!!
was shown as soon as i connected. But when i added the PDA file, it didnt detect it and remained the same at 008. So i went ahead with the start and this is what it says,
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU5EPK5_G920TTMB5EPK5_G920TUVU5EPK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This was the case for both the stock firmwares. PLEASE SOMEONE HELP ME OUT. I cant let my folks find out. Can any of u answer this as quickly as possible? PLEASE! IT'D be a huge help.