The Gyro sensor stop working on my Xperia S with .75 stock rom, the screen will not be rotate at all, I have tried the master reset, still doesn't work. If I use the compass, the screen goes blank and then restart. Please advise
Correct me if I'm wrong, but the phone does not use the Gyro in order to rotate screen. It uses the accelerometer...
And there must be an option to enable/disable it from the settings (I do not have the phone right now to be sure).
You turn it off in option, and you above me are correct.
Sent from my LT26i using XDA
The problem is the auto rotation option is already enabled, the accelerometer is control the screen rotation, while the gyro sensor detects the movement of the phone, they are both not working for some reasons, if I restart the phone, it might work for a while and then stop working again.
Use this code in dialer and test them
#*#*7378423*#*#
Sent from my LT26i using Tapatalk 2
It says function not built in!!
Not built in?!?
Maybe you should head to Sony Service!
reflashed
NO the gyro+ accelerometer are built in the phone definately
since is work in my one !
Did you dropped, hitted?
try to re flash using PCC if not 99% your phone will have 2-3 weeks holiday from you in Sony repair center because it the hardware problem. guess
Tried to restore it to the factory setting, reflashed through PCC. It is still the same. It might work for couple of minutes or otherwise hours, but then it starts not working again. It is really annoying! The funny bit is the display would just stay horizontally, no matter which way I hold the phone while the "auto rotation" option is enabled.
Probably send to the service centre is the only way, as my screen has the yellowish problem too. I need to get it fix anyway.
edmorize said:
The Gyro sensor stop working on my Xperia S with .75 stock rom, the screen will not be rotate at all, I have tried the master reset, still doesn't work. If I use the compass, the screen goes blank and then restart. Please advise
Click to expand...
Click to collapse
AUTO ROTATION PROBLEM:
Tried on xperia p
TRY THIS AT YOUR OWN RISK OR ASK PROFESSIONAL !!!
I solved it by opening the phone and then tapping the gyro sensor IC a bit. After that auto rotate started working and no problem uptill now.
USAMA RIAZ said:
AUTO ROTATION PROBLEM:
I solved it by opening the phone and then tapping the gyro sensor IC a bit.
Click to expand...
Click to collapse
Where is it located?
Thanks!
Related
When I'm in a call and put the phone to my ear the screen does not turn off instantly. Only after the screen timeout period has reached does the screen goes off. Is this normal?
Hello, and sorry for my english, i have the similar issue, when i put the phone on my ear the screen continue on, only in a few second appear lock the screen. I have another issue: the ambient senson, in darkness and sun light the automatic brightness doesn't change the bright of the screen, only when i enter to the brightness settings and change the bright automatic off and on go right, i believe that is problem of the firmware, my firmware version is the spanish vodafone version. Can i change to the generic firmware via Sonyericsson Update Service software??
kiwi45 said:
When I'm in a call and put the phone to my ear the screen does not turn off instantly. Only after the screen timeout period has reached does the screen goes off. Is this normal?
Click to expand...
Click to collapse
I don't think the proximity sensor would switch off your screen instantly. It will ignore all touches to the screen so you wouldn't touch something by mistake. The screen will be off later. Can test it with your fingers on the sensor during a call.
shvyue said:
I don't think the proximity sensor would switch off your screen instantly. It will ignore all touches to the screen so you wouldn't touch something by mistake. The screen will be off later. Can test it with your fingers on the sensor during a call.
Click to expand...
Click to collapse
I did that. If the sensor is blocked with my finger or ear the touch can't be used. But the screen turns off quite a bit later than that. I think it's the same screen off settings that you use normally when the phone is unlocked and you don't lock it.
I've notice that my sensor doesn't seem to work. Under the brightness option if I check the "Adjust automatically" the screen still does not adjust the brightness. Also noticed the screen goes dark a minute in on a call, when I move it from my head it does not go bright. Sometime I have to unlock screen if call is longer than a few minutes.
Yep normally proximity sensors (on Nokia, iPhones..etc) turn off the screen immediately when ur face is close. Some examples:
http://www.youtube.com/watch?v=6xakUmz1zwc
http://www.youtube.com/watch?v=YjlDm9zGLpc
kiwi45 said:
Yep normally proximity sensors (on Nokia, iPhones..etc) turn off the screen immediately when ur face is close. Some examples:
http://www.youtube.com/watch?v=6xakUmz1zwc
http://www.youtube.com/watch?v=YjlDm9zGLpc
Click to expand...
Click to collapse
Yeah, that's true. But I know that mine works! It's just not turning off the screen. Don't really know if it's supposed to do that though. But I think so!
Just spoke to vodafone and they are sending me a replacement tomorrow.I doubt that will sort the problem. But its worth s try!
Sent from my X10i using the XDA mobile application powered by Tapatalk
The Proximity sensor works fine. However it works differently from what you would expect:
-When making a phone call the sensor detects your big head and locks the screen (put your finger near the sensor to try it, you won't be able to push any buttons on the screen).
-It only locks the screen. The screen turns off after some time.
-When the screen is off during a call and you remove your head (or finger) from the sensor the display turns on again.
Works fine for me! Don't kill SE because they do it differently then other manufactures, it works just fine.
Well I wish I could disable the proximity sensor right now.
I am trying to make a call without my big head bloking the proximity sensor, as I need to dial a number get trough the switchboard. (right now its lying flat on my desk while I am dialing.. So no head at all, just roof)
and the screen is still locked so I cant press the number 1.
The strange thing it worked when I called SE support, but it doesnt work now.
But right now when I need it, it does not work.
Vin87 said:
The Proximity sensor works fine. However it works differently from what you would expect:
-When making a phone call the sensor detects your big head and locks the screen (put your finger near the sensor to try it, you won't be able to push any buttons on the screen).
-It only locks the screen. The screen turns off after some time.
-When the screen is off during a call and you remove your head (or finger) from the sensor the display turns on again.
Works fine for me! Don't kill SE because they do it differently then other manufactures, it works just fine.
Click to expand...
Click to collapse
drfjeld said:
Well I wish I could disable the proximity sensor right now.
I am trying to make a call without my big head bloking the proximity sensor, as I need to dial a number get trough the switchboard. (right now its lying flat on my desk while I am dialing.. So no head at all, just roof)
and the screen is still locked so I cant press the number 1.
The strange thing it worked when I called SE support, but it doesnt work now.
But right now when I need it, it does not work.
Click to expand...
Click to collapse
That is indeed strange. I've just tested it several times:
Make a call> Let the screen turn off>remove from my big head>screen turns on >screen is unlocked and I can acces the 'dialer'.
Well as I wrote, sometimes I can do it sometimes I can't.
I will try to clean the proximity sensor (right side of the Sony Ericsson logo)
the next time it happens. Maybe its to over sensitive.
Right now it works to the same number I was trying earlier..
Vin87 said:
That is indeed strange. I've just tested it several times:
Make a call> Let the screen turn off>remove from my big head>screen turns on >screen is unlocked and I can acces the 'dialer'.
Click to expand...
Click to collapse
Is it right to assume that the auto brightness is controlled by the proximity sensor. When I change my screen brightness to auto. It goes dull and stays dull.
Sent from my X10i using the XDA mobile application powered by Tapatalk
Ny88 said:
Is it right to assume that the auto brightness is controlled by the proximity sensor. When I change my screen brightness to auto. It goes dull and stays dull.
Sent from my X10i using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
I think that's another sensor actually.
Hello Frnds i have facing problem with my mini pro..
my hardware querty keypad lights are not turning on...however if i lock my fone with on/off switch & than press again for unlock than my keypad lights are turned on but only for 1-2 seconds & than turned off automatically...
please help me out with any solution is it the problem with ambient light sensor? or any thing else?
manjeet15 said:
Hello Frnds i have facing problem with my mini pro..
my hardware querty keypad lights are not turning on...however if i lock my fone with on/off switch & than press again for unlock than my keypad lights are turned on but only for 1-2 seconds & than turned off automatically...
please help me out with any solution is it the problem with ambient light sensor? or any thing else?
Click to expand...
Click to collapse
Have you tried to close the ambient sensor with your hand? If you're on dark room it should automatically lid. but if you're on the bright room, it is of course turned off. there's an app on Market to monitor the ambient sensor. Play with your thumb above the sensor to see if it's working or not.
hansip87 said:
Have you tried to close the ambient sensor with your hand? If you're on dark room it should automatically lid. but if you're on the bright room, it is of course turned off. there's an app on Market to monitor the ambient sensor. Play with your thumb above the sensor to see if it's working or not.
Click to expand...
Click to collapse
hello i tried to close the ambient sensor with hand..but keyborad lights not lid..
even in dark or night its not on..however only worked for 1-2 seconds when i lock/unlock fone via on/off swicth..
however will update u once checked out ambient sensor after downloading application from market
i cant found any application to test my ambient sensor..
is there any other method to test that my ambient sensor is working
my proximity sensor is working
manjeet15 said:
i cant found any application to test my ambient sensor..
is there any other method to test that my ambient sensor is working
my proximity sensor is working
Click to expand...
Click to collapse
The name of apps is ProxyLightTester. give it a try.
hello thanks frnd after installing it & using it its shows that my proximity & light sensor is working while holding hand on light sensor the mobile image in the application got clearly displayed & the numbers of light sensor increases/dicreases...
however my keyboard light dont lid while using it or opening it as usual any help please
well, maybe reflash? dunno for another solution.. if it still persist, maybe you need to reflash with SEUS.. if it still like that, maybe you can ask to Sony Center i guess..
hansip87 said:
well, maybe reflash? dunno for another solution.. if it still persist, maybe you need to reflash with SEUS.. if it still like that, maybe you can ask to Sony Center i guess..
Click to expand...
Click to collapse
actually my fone fall into the water 1 week ago..than i opened it & than close it after removing water etc.. from whole fone after that its working fine no problem at all..
but keypad lyts not working from last 2 days i think (but lights gets lid when we unlocked the fone either by sliding up the keyboard or by lock key but only for 2-3 secs than go off automatically even in dark)
so i want to know is it hardware problem?? that does not seems to be
or any software problem..
i update via seus 2-3 times but no works
is any other way to light it up the keyboards while we open it & ambient light sensor is also working
i cant find wat to do.. & due to water damage i think warranty also void..
no 1 to help frnds?
is there no 1 to help friends?
my keypad lights are working all are lid but only for few seconds may called it for 2 seconds that also when we unlock the phone either by slideout the keyboard or by pressing the unlock button...
i flash my fone 2-3 tyms by seus but no sollution...
is there any solution via changing drivers etc to enable keyboard lights only when we slideit out without the use of sensor or else..however my sensor is working
or any 1 please provide me there folder files of "sys/devices/platform/msm_pmic_misc_led.0/"
Hmm i don't know any other solution manjeet. But i want to share you the same experience like yours..
I have just reflashed into the normal firmware. but when i tried to test the light by closing the light sensor, i am surprised to know that the keyboard was not lid too! It just works for 1 second when i open the keyboard, and turns off soon. i was in panic then, but i tried to be calm, and when i tried to hide into a dark room, it works again. Fiuhh..
I don't know but maybe you need to really go to the dark places. Seems that the Proximity sensor and Light sensors work in tandem. If it still fails in the dark, then i guess you really need to have it serviced.. Dunno bout the cost, but it shouldn't be too expensive..
Good luck with your u20i bro.
thanx hansip......
hansip87 said:
Hmm i don't know any other solution manjeet. But i want to share you the same experience like yours..
I have just reflashed into the normal firmware. but when i tried to test the light by closing the light sensor, i am surprised to know that the keyboard was not lid too! It just works for 1 second when i open the keyboard, and turns off soon. i was in panic then, but i tried to be calm, and when i tried to hide into a dark room, it works again. Fiuhh..
I don't know but maybe you need to really go to the dark places. Seems that the Proximity sensor and Light sensors work in tandem. If it still fails in the dark, then i guess you really need to have it serviced.. Dunno bout the cost, but it shouldn't be too expensive..
Good luck with your u20i bro.
Click to expand...
Click to collapse
thanx bro.. my mini pro is just working fine no prob at all...& i check it in total dark also..but its not work
however i didnt need keyboard light as such but its looks odd in dark nothing much..
i only want that if its software prob than why not i fix it with my own.. at last i go for repair shop no tension regarding cost but i want to know is it repairable by our own or not...
may b any1 else facing this prob & short it out...
Try this!! Kfix thread
Hello,
the following problem appears when i try to unlock the phone after some hours: i can see my home screen, but the screen stays extremely dim. When i try to start an app (e.g. browser) the screen turns black. I can unlock it again, but the screen stays dim. after some unlocking the screen becomes normal (normal brightness) and also the apps are startable.
i am using autobrightness, the stock firmware, 4.1.1 (i9300xxdlih) power saver is not turned on.
thx, i hope you can help me solving this problem
fanbayer
Fanbayer said:
Hello,
the following problem appears when i try to unlock the phone after some hours: i can see my home screen, but the screen stays extremely dim. When i try to start an app (e.g. browser) the screen turns black. I can unlock it again, but the screen stays dim. after some unlocking the screen becomes normal (normal brightness) and also the apps are startable.
i am using autobrightness, the stock firmware, 4.1.1 (i9300xxdlih) power saver is not turned on.
thx, i hope you can help me solving this problem
fanbayer
Click to expand...
Click to collapse
i updated mobile phone to android versiopn 4.1.2. this morning. Unfortunately the problem still appears.
Maybe its a hardware defect?
Try to disable somehow light sensor and change settings to non auto brightness.
Sent from my GT-I9300 using xda app-developers app
d0hn said:
Try to disable somehow light sensor and change settings to non auto brightness.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i disabled auto brightness and set the brightness to the highest level. But its still same: very dim and after a while a black screen; after a few times of unlocking, the display works normally
I have just seen the same issue on a friend's S3.
Anyone else? I feel like this is a very big issue that is still lurking in a lot of devices.
I tried it myself and I toggled the power button to turn the screen on and off.
It doesn't take long but sometimes when the screen turns back on, it's super dim and you can faintly see the lockscreen image.
You have to cycle the screen several more times to get it to the 'correct' brightness, and no it is NOT a brightness setting.
It's some hardware issue in the phone.
Sorry for the necrobump, but I only found this thread. I have this problem too since about a week back. It makes my phone useless at times. I first thought it was a software issue. I have an app (called Twilight) for dimming the screen more than normal settings and also toning it, for nightime use, and I thought that was the culprit first, but nope. I have flashed rom, recovery, wiped all caches I can think of. Still happens, just now I was in the middle of installing android revolution hd, and the screen ultradimmed on me so I can't finish the process
Thing is, a few months ago I managed to crack my screen by way of gravity and concrete. I let the samsung brand service centre in Stockholm repair it for me (it is out of warranty) and this issue with the dimming never happened before that. Then again, it didn't happen directly afterwards either... but still. So, I am thinking: either me dropping it caused more damages and this is because of that. Or the service center did a bad install of the new screen. Or, the replacement screen that was installed has a defect in itself. I am leaning a bit towards the third explanation... maybe different batches of screens?
Does anyone have any ideas? If I am to contact the service center and complain about their work I would like to be able to point towards a "known problem"...
8Fishes said:
I have just seen the same issue on a friend's S3.
Anyone else? I feel like this is a very big issue that is still lurking in a lot of devices.
I tried it myself and I toggled the power button to turn the screen on and off.
It doesn't take long but sometimes when the screen turns back on, it's super dim and you can faintly see the lockscreen image.
You have to cycle the screen several more times to get it to the 'correct' brightness, and no it is NOT a brightness setting.
It's some hardware issue in the phone.
Click to expand...
Click to collapse
Take it back, if it didn't happen before then the new screen is most likely.
It isn't a common problem
Hi.
Bought a S2 a few days ago and flashed 3 roms. (ressurection remix - pacman - jellybam)
In everyone something happens quite annoying.
When I press DIAL to make a call, the screen goes immediatlly off.
Then I'm forced to press the home button or power button to get the screen on again...but as soon as I try to get into the call screen (to use the dial for example), the screen goes off again! The call is still active and I can speak in normal conditions, but I'm unable to get into the call screen!
What may be causing this problem? Is it possible to be a proximity sensor problem?
It's starting to p*ss me off a lot!!!!
Some of those symptoms are the result of the proximity sensor in the device. Read about it in the manual that came with your phone.
Sent from my digital submersible hovercraft.
I think you missunderstood me... This is not my first S2...or first Android device.
I've had S2, Arc S, S3, etc...
I know how the proximity sensor works...
What is happening is that the sensor turns off the screen regardless of having something near by or not...
Therefore I'm never able to use the dialpad during a call or even see the hang up button...or the duration of each call.
plantunes said:
I think you missunderstood me... This is not my first S2...or first Android device.
I've had S2, Arc S, S3, etc...
I know how the proximity sensor works...
What is happening is that the sensor turns off the screen regardless of having something near by or not...
Therefore I'm never able to use the dialpad during a call or even see the hang up button...or the duration of each call.
Click to expand...
Click to collapse
Strange. Maybe the sensor is faulty or it's a software glitch. Did you try to reinstall kernel/ROM?
Sent from my digital submersible hovercraft.
I would suggest typing *#0*# in the dialer, clicking "sensor" in the menu that comes up and test the proximity sensor. If thats fine, I'd suggest a softeare fault.
Sent from my GT-I9100 using xda app-developers app
Did that... *#0*# onde my dual pad but it didn't happen anything
hi all
i have spent almost 2 days for an answer , no luck
my problem is
my phone s3 lte . screen turns of as soon as i obstruct the front camera and the 2 sensors area . it was ok before , since few days it started doing this . now i cant take screen shot pictures by moving my palm across the screen for example , not sure what this is due to
any help please .?
You've posted in the wrong section, questions go in q&a section -those for the i9305 stand more chance of a reply that won't brick your phone in the special q&a for LTE phones.
Report your own post and ask for it to be moved.
Having said all that, you've probably got a corrupt framework or a hardware fault. Flash a fresh official stock rom after a factory reset to test. If it's still the same then send for repair.
Is this when in a call sorry to ask noob question just curious if your covering the proximity sensor
Sent from my GT-I9300 using Tapatalk 4
tonyt3rry said:
Is this when in a call sorry to ask noob question just curious if your covering the proximity sensor
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
thank you all for helping , i have switched the phone off removed battery and now sorted .
it was not during call only but all the time .
it seems that the problem resolved on its own .phone was scared of me posting in xda lol
thx
Screen Blanks out on Galaxy tab
I ran this test and your screen is only supposed to change color from white to green during the test. My screen blanks out completely during the test.
Not sure if the sensor is bad or if it is a software or and OS issue yet.
you tube.c om /watch?v=N8G6ksaciho
Need advice.
I just received a SM-T705Y, KitKat. When I am in only some applications not all, the screen shuts completely off when my finger passes over the two sensors/camera near the word "SAMSUNG" at the top of the device. I have tested the cause and done it repeatedly by putting a small piece of black electrical tape on the sensor.
With the tape on the sensor, the screen never shuts off. The screen then will come back on several seconds after I remove my finger/tape from the sensor. Also, I do not have to actually touch the sensor to get the screen to turn off. But it activates the lock screen when it does turn off. ANNOYING !!!
My SM-T705Y is not rooted. It is in developer mode.
I think its the sensor that turns the screen off when you take a phone call is still stuck on ???
I have the phone proximity sensor turned off in: Settings> When I'm the phone screen The screen stays on.
Auto adjust screen tone : ON
Auto brightness is off
I have the "Smart Stay" turned off in: Settings>Device>Display.
Screen timeout set to 10 minutes. Screen mode set to "AMOLED Cinema"
I have restarted, not rebooted the SM-T705Y
forums. android central.com/lg-optimus-g-pro/
358206-screen-goes-black-when-front-facing-camera-covered
forums.android central.com/andro
id-4-1-4-2-4-3-jelly-bean/309867-screen-goes-off-when-my-hand-passes-camera
android forums.com/threads/screen-turns
-off-when-camera-blocked.746785
Milwaerinc at gmail.com
.
The proximity sensor is located there. That's why you have that issue. It's normal behaviour.
If you are trying to turn the screen off during calls there is an option to do so in either calls settings or display settings.
If you move the phone away from your head it will turn the screen on. It's a proximity sensor, thats its job!.
Beamed in by telepathy.
Fix
I have same problem with my samsung and I fix it!
Just close all recently used app (press button next to menu button and close all) and you will have normal screen..... Looks like some app, especially call app make problem and activating proximity sensor. So one more time close all recently used app, press button next to menu button and close all app....
Good Luck!
Marko