i brick my ace
i have Flashing Problem
in just last night i flash ma ace .
but i cant .. because ..pc shutdown and my ace is brick.
error...with odin
first is good but 1/10 step installing rom then 4 step installing is hanging or not
installing.. i just wait 2 -3 hour but ntng work .
i try 4-5 time bt 4step ( amss-somthing like that ) file is not installing..
so plz tell me how to flash my ace .
i try diffrent base or 1-pack file (zip) like DDKQ8,xxkph,xwkt7 .. but .. i say (Amss) that file cant installing ..
tell me what can i do ...
thanku all..
immy28 said:
i brick my ace
i have Flashing Problem
in just last night i flash ma ace .
but i cant .. because ..pc shutdown and my ace is brick.
error...with odin
first is good but 1/10 step installing rom then 4 step installing is hanging or not
installing.. i just wait 2 -3 hour but ntng work .
i try 4-5 time bt 4step ( amss-somthing like that ) file is not installing..
so plz tell me how to flash my ace .
i try diffrent base or 1-pack file (zip) like DDKQ8,xxkph,xwkt7 .. but .. i say (Amss) that file cant installing ..
tell me what can i do ...
thanku all..
Click to expand...
Click to collapse
Try a usb jig.
Sent from my GT-S5830 using xda premium
what is jig ? idk
Edit; I search in Google. .for jig ..
But I can putting my ace in downloading mod.
By I can't flash. .. that file is not instolling .
USB jig: http://forum.xda-developers.com/showthread.php?t=1604707
Or download android commander, press the power button kinda icon and reboot to download. (if you have knowledge on ADB then use that instead of android commander)
Try just getting a boot on it in the AP boot section, use Odin multidownloader 4.42 with cooper.ops, then from there flash a new firmware with your new boot image allowing it to hopefully work
dont forget to activate usb debuging
Related
Hello gurus,
I am stupid.
I did not backup my Firmware.
I did not even look at what version it is...
Was so in a hurry to install Litening Rom 6.1
Now I have a pb.
Flashed via ODIN failed.
now I get Screen of death.
I can connect to ODIN and it recognizes the phone.
What do I need to flash ?
I tried few things... but didn't work.
I even tried to play around with the files... and found that the
problem is that sbl.bin and boot.bin seem to be protected...
whenever they are present in the file I am flashing ,I get an failed.
But when I remove those 2 files from the tar file , then It flashes normally , no error... but the phone does not boot... gets stuck at the Samsung I9100G writing screen.
Please help.. the phone is not mine ! It is a friend's ! Silly me right ?
Thanks for your help.
Can you enter to download mod ?
1. Take off the battery during 5 minutes
2. Your phone will be disconnected at your computer
3. Download the driver of your phone and install it
4. Take ON your phone and try to enter to the download MOD
5. Now you can connect your phone to Odin and normaly your computer recognize your phone
it worked for me and i hope it will be the same for you.
My problem is what firmware I should install !!!!
the PC recognizes the Phone already !!
Stock firmware for i1900 G is what you require .
jje
And I can find this where please ?
where do you live ?
Have you disconnected your phone at your computer before try to enter in download mod ?
Try that, take off the battery and press Volume down and Home, now plug the battery.
Normaly you enter to download mod.
pierreammoun said:
And I can find this where please ?
Click to expand...
Click to collapse
TRY the search button .Or even GOOGLE .
Might even be a 1900 G thread .
jje
I posted in your other thread in "Android Development", didn't see this one here.
Get your firmware from http://www.sammobile.com/!
I wanna flash a rom as my galaxy ace does not go on (HardBricked) but if I press Power+Home+Volume down and then instert battery with usb cable pluged in already odin picks it up but stays at setting up conection
Here is the code
Code:
Check MD5 FileName...
MD5 File Name : S5830DDKQ8_S5830ODDKQ7_S5830DDKQ8_HOME.tar
Open File Name : S5830DDKQ8_S5830ODDKQ7_S5830DDKQ8_HOME.tar
Check MD5 ...
Tail MD5 : 4E3BBB34FEC0DF6DB11080AD5AA5FB9F
Image MD5 : 4E3BBB34FEC0DF6DB11080AD5AA5FB9F
Check MD5 ... ok
Setting up parrent[0]
Setting up parrent[0]
Setting up parrent[0]
Setting up parrent[0]
Setting up parrent[0]
Setting up conection[0]
And just stays there I have tried:
diferent usb ports
Different osses win7 and xp
different pc's 4lapptops and 2 desktop computers
Different stuf to flash
Removing all stuff like sim+Sd etc...
Diffrent drivers
(and I always close kies (In task man) )
(And always run as admin)
Have not tried:
Different odin version(Mine v4.38)
Cuz I don't find anyother that works for ace...
Also:
Have tested when I tick debug Only
Debug only and pda format
Debug only and boot restore
Debug only and boot restore+pda format
Please guys help...
Do you have Kies installed on your PC? If so, go to task manager and check the process list for all processes that start with the word kies and kill them.
That's the only thing I can suggest as it's the only reason Odin hasn't worked for me in the past.
Well make sure u hav admin rights bfore using odin dat helps i hope
Archer said:
Do you have Kies installed on your PC? If so, go to task manager and check the process list for all processes that start with the word kies and kill them.
That's the only thing I can suggest as it's the only reason Odin hasn't worked for me in the past.
Click to expand...
Click to collapse
i did say that I always close kies from start manager
MajinSaiyan4 said:
Well make sure u hav admin rights bfore using odin dat helps i hope
Click to expand...
Click to collapse
forgot to say that I do....I do
BUMP!
Hmm dats all i cud tell..y dont u ask in ace forums maybe u wil get help der
I have posted there 3 threads one where I bricked it there I got the answer for odin to pick it up then I made one with this odin error and did not get the answer and now I posted here looks like I gotta send to service senter
if u can enter dwnld mode den its probably soft brickd..but dunno y odin isnt wrkng 4r u ..at last resort try flashng other fw..maybe der's error in pckge u dwnlded..
BTW try reinstallng drivers 4r ur phn u can get dat frm sammobile.com make sure u select ur phn model..
Sent from my GT-S5670
f u can enter dwnld mode den its probably soft brickd..but dunno y odin isnt wrkng 4r u ..at last resort try flashng other fw..maybe der's error in pckge u dwnlded..
Click to expand...
Click to collapse
BTW try reinstallng drivers 4r ur phn u can get dat frm sammobile.com make sure u select ur phn model..
Sent from my GT-S5670
Not soft bricked nothing happens on screen it is just dead but odin picks it up
Have tried new drivers did not work
And how could it be the packdge if it does not settup conection...
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
humzagr8 said:
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
Click to expand...
Click to collapse
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
neerajganga said:
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
Click to expand...
Click to collapse
You should try to go into recovery mode. From there, try to factory reset
Sent from my GT-I9100 using Tapatalk 2
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
humzagr8 said:
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
Click to expand...
Click to collapse
well it cost hardly a $ or 2
if u cant
then try lending 1 search some 1 near ur place here
http://forum.xda-developers.com/showthread.php?t=1495867&page=35
or make a usb jig urself .
Some one reported this:
Plug a standard usb cable while pressing vol down. It will enter download mode. Not tested by me, but you loose nothing to try and tell us if it works
Sent from my GT-I9100 using Tapatalk 2
omg thanks so much i managed to get in to download mode
How to solve that
I have an S2 Hercules T989... I tried upgrading it from 2.3.6 to 4.0 but when I flashed with Odin 3.18 it gave me that error message.
I have tried four or five times reflashing it, rebooting to download mode but still it stayed like that for 1 1/2 hours...
So, I got to visit another site, I couldnt remember that actually, but it talked about on how to upgrade S3 to latest version.
There, I downloaded the latest version of Odin, too, that's v4 I think, and when I tried again (first time with that version), it worked!
You don't need to actually redownload the file, but instead, try other odin versions, recommended to download and use the latest one coz it will be the safest way to upgrade your galaxy device. Hope this helps.
odin failed when updating ( it suddenly shows fail )
which gave me a hard brick afterwards ! ( I cant make the combo , cant get into recovery menu )
Im wondering if i buy a usb Jig , can it actually works ?
cause I saw that many people is having issues with USB JIG and claims that it dosen't work
for I1900G
HELP NEEDEEEDDDD !!!!!
or should i surrender ?
Only way is JTAG.
If even that doesn't work,you can do nothng . :/
Sent from my GT-I9100 using xda premium
noobxkevin said:
odin failed when updating ( it suddenly shows fail )
which gave me a hard brick afterwards ! ( I cant make the combo , cant get into recovery menu )
Im wondering if i buy a usb Jig , can it actually works ?
cause I saw that many people is having issues with USB JIG and claims that it dosen't work
for I1900G
HELP NEEDEEEDDDD !!!!!
or should i surrender ?
Click to expand...
Click to collapse
providing half cooked info will lead u knowhere, post in detail which rom/kernel u tried to flash thro Odin, was the same really meant for I9100g or was it related to Some other model of s2 etc.
Sun90 said:
providing half cooked info will lead u knowhere, post in detail which rom/kernel u tried to flash thro Odin, was the same really meant for I9100g or was it related to Some other model of s2 etc.
Click to expand...
Click to collapse
well, i risk my friends phone to try and root, i installed the wrong the all-in-one zip which will root and replace recovery with CMW .
It made me a soft bricked , cannot be boot or stuck at boot logo. and the recovery wont work. i tried the solution made by others that using odin3 executive v1.0.0. i went into download mode and start the button on odin3. on the half way. the message stops. i've force to unplug it and see weather it works . but then nothing happen. i can't even boot up the phone .
anyway , when i tried to connect it to the pc . the driver logo popup but installation of driver failed .
I wonder if USB JIG could help me go into download mode again .
help :crying::crying:
If you can manage getting USB jig try it... And if you cant i better recommend you jtag...
Anyways what u were flashing via odin?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Hello .. I need your help guys ...
I have Samsung Galaxy S Plus ...
I have installed cmw recovery ...
It is rooted ...
When i want to flash a stock version on my samsung galaxy s plus , i choose the pda file , odin detect my phone , and when i Click Start ,it stuck to setupconnection ..
I have all drivers , no kies process running , no sim , no external card , 50%+ battery , tried in all usb ports and the same problem , it stuck to setupconnection , i have enabled debug mode too , tried in other Pc , still stuck ...
Any help here ...
xeinebiu said:
Hello .. I need your help guys ...
I have Samsung Galaxy S Plus ...
I have installed cmw recovery ...
It is rooted ...
When i want to flash a stock version on my samsung galaxy s plus , i choose the pda file , odin detect my phone , and when i Click Start ,it stuck to setupconnection ..
I have all drivers , no kies process running , no sim , no external card , 50%+ battery , tried in all usb ports and the same problem , it stuck to setupconnection , i have enabled debug mode too , tried in other Pc , still stuck ...
Any help here ...
Click to expand...
Click to collapse
Have you tried the latest version of ODIN v3? 1.87 I think.
I have odin 3.07 , i have tried with odin multidownloader too , there i upload and an ops file but it always brick my phone
Here are two of the latest versions. I just got my Galaxy Tab 2 two days ago so I'm still new at all the ODIN stuff.
I downloaded one of them , now i should upload pit and pda right ?
Can happen something with my phone , mabye brick or something else ?
xeinebiu said:
I downloaded one of them , now i should upload pit and pda right ?
Can happen something with my phone , mabye brick or something else ?
Click to expand...
Click to collapse
Should be no difference other than version differences in the ODIN apps themselves. ODIN is ODIN.
Can it brick my.phone , or if the process will not finish , can i reflash it again ...
xeinebiu said:
Can it brick my.phone , or if the process will not finish , can i reflash it again ...
Click to expand...
Click to collapse
Anytime you flash something to a device you chance bricking it. For your device I cannot say for sure. Both versions of ODIN I posted came from Samsung Galaxy threads.
Hey bro , still stuck in setupconnection ...
I didnt tried with pit ....
Now i tried with pit too , still stuck ... any idea ?
xeinebiu said:
Now i tried with pit too , still stuck ... any idea ?
Click to expand...
Click to collapse
No. Sorry. Isnt there a forum for your device?
Sent from my Samsung Galaxy Tab 2
xeinebiu said:
Hello .. I need your help guys ...
I have Samsung Galaxy S Plus ...
I have installed cmw recovery ...
It is rooted ...
When i want to flash a stock version on my samsung galaxy s plus , i choose the pda file , odin detect my phone , and when i Click Start ,it stuck to setupconnection ..
I have all drivers , no kies process running , no sim , no external card , 50%+ battery , tried in all usb ports and the same problem , it stuck to setupconnection , i have enabled debug mode too , tried in other Pc , still stuck ...
Any help here ...
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1922505
Sent from my Android Smartphone
if you use rom for your device with usb debugging on then chances of bricking is very less. also .pit file is for repartition so dont add it. hit thanks if i helped.
amit34521 said:
if you use rom for your device with usb debugging on then chances of bricking is very less. also .pit file is for repartition so dont add it. hit thanks if i helped.
Click to expand...
Click to collapse
What has usb debugging to do with bricking devices?USB debugging is active only when all services are up and running.Untill then its bootloader and kernel!
Also,.pit file contains only partition Information Table.So you can use it like you want.And I have always been flashing with pit file and not even once failed.Although you could use it only when flashing a whole rom!Not when flashing just kernel/modem etc...
To OP: Look if you have kies running at behind.It hinders the update process and kies too listen to download mode as it is the method kies uses to update.Does S plus uses some kind of lag fix in custom roms?Heard of those in sgs days.Dont know what fs S plus uses.
Sent from my GT-N7000 using xda app-developers app