Hello, i used xrecovery for many time, i flashed stock rom 2.3.3, and then i tryed to enter on xrecovery and I could not enter this time, when i press the back button, this doesn't make any difference, i tryed to reinstall xrecovery on busybox installer, the installation was successful but the same thing happened. Any suggestions ?
calage1234 said:
Hello, i used xrecovery for many time, i flashed stock rom 2.3.3, and then i tryed to enter on xrecovery and I could not enter this time, when i press the back button, this doesn't make any difference, i tryed to reinstall xrecovery on busybox installer, the installation was successful but the same thing happened. Any suggestions ?
Click to expand...
Click to collapse
I guess your x recovery is not properly installed.
I had the same problem first.
This is what I did (since 2.3 cannot root as easy as 2.1)
1. Download the latest flashtool (http://forum.xda-developers.com/showthread.php?t=920746)
2. Download the 2.1 firmware from here (http://www.mediafire.com/?sqv6274anzfzn2x)
3. Now place the .ftf file in the firmware folder in flashtool and flash it and phone will be 2.1
4. Now root the phone and install x reovery
5. Reboot and check if recovery is properly working
6. Now do a fresh install of your favorite 2.3 ROM and enjoy !
Hope this helps...
..JusT Try 2 Help..
Yuuhuuu..Mate..you've already in Stock GB 2.3 don't you..?
Try this TuT..http://forum.xda-developers.com/showthread.php?t=1196808
Hopely Helpfull..
runaway_bunny said:
I guess your x recovery is not properly installed.
I had the same problem first.
This is what I did (since 2.3 cannot root as easy as 2.1)
1. Download the latest flashtool (http://forum.xda-developers.com/showthread.php?t=920746)
2. Download the 2.1 firmware from here (http://www.mediafire.com/?sqv6274anzfzn2x)
3. Now place the .ftf file in the firmware folder in flashtool and flash it and phone will be 2.1
4. Now root the phone and install x reovery
5. Reboot and check if recovery is properly working
6. Now do a fresh install of your favorite 2.3 ROM and enjoy !
Hope this helps...
Click to expand...
Click to collapse
I will try this, i come back to reply, thanks
runaway_bunny said:
I guess your x recovery is not properly installed.
I had the same problem first.
This is what I did (since 2.3 cannot root as easy as 2.1)
1. Download the latest flashtool (http://forum.xda-developers.com/showthread.php?t=920746)
2. Download the 2.1 firmware from here (http://www.mediafire.com/?sqv6274anzfzn2x)
3. Now place the .ftf file in the firmware folder in flashtool and flash it and phone will be 2.1
4. Now root the phone and install x reovery
5. Reboot and check if recovery is properly working
6. Now do a fresh install of your favorite 2.3 ROM and enjoy !
Hope this helps...
Click to expand...
Click to collapse
Thanks, this works for me.
i have xperia x10 rooted 2.3.3 latest baseband and karnel 2.69
please tell me how do i enter xrecovery i cant do it i reboot my phone, than press back key after SE Text appear and nothing! boot like normal... i want to install rom like cm7 or miui but for that i need to get into recovery mode... also tried to install rom manager premuim than i saw that i have CWM 5.0.2 latest please help..
to install xrecovery do it thru Flashtool it has option in it install xrec !! jus do it and xrec will be up and working !!
hope it works
plz thank me if it did!!
thanks!! it worked!!!
should u be on .71?
i have rooted My xperia x10i today. But i cant boot into xrecovery.. I was thinking that my phone has not been rooted yet but when i again tried to root it with superoneclick software it said that deivce is already rooted..
I also tried to install xrecovery from market.. I installed the app and opened it and clicked the button "Install xrecovery" a message apperaed for a litle time saying permission granted to xrecovery by superuser... After that there is a cross sign on the option under that button.... I watched a video in which instead of cross mark there was a tick mark... What is this??? and y?
Download Flashtool. Links are in the dev section. It will root/install xRecovery/do everything else for you. From now on, Flashtool is your best friend.
tHANKS ALOT... I HAVE GOT XRECOVERY BOOT... HURRAY.. i AM VERY HAPPY NOW....... nOW PLZ GUIDE ME HOW TO INSTAL A CUSTOM 2.3.3 ..... i WILL PRESS THANKS BUTTON FOR U.. THANKS ALOT...
waqar_shah said:
tHANKS ALOT... I HAVE GOT XRECOVERY BOOT... HURRAY.. i AM VERY HAPPY NOW....... nOW PLZ GUIDE ME HOW TO INSTAL A CUSTOM 2.3.3 ..... i WILL PRESS THANKS BUTTON FOR U.. THANKS ALOT...
Click to expand...
Click to collapse
so again it´s in the development thread but short
Check if the desired rom need unloked bootloader if yes well there is a plugin in xda´s flashtool just use it and it will be fine
Maybe you want to backup your aps via titanium backup.
so if needed flash the desired/required Custom kernel. some roms only work with special kernel´s
Place Kernel´s wifi zip and the zip of desired rom on SD Card
Start xrecovery or cwm most custom kernel´s got both you see in rom description where to flash from.
but for both recovery´s you should wipe data(factory reset) and wipe dalvik Cach (advance settings)
if battery s full 100% it also fits that you can wipe battery stats. maybe your x10 will last 1-2 hours more
flash first the rom itselfs: Install Custum Zip/choose Zip/(Serch zip on sd) Flash
maybe there´s a need of flashing a hotfix same procedure
Flash the wifi modules zip for the kernel if needed
Reboot device (maybe on forst boot it stocks at bootscreen the just pull out the
battery and wat 1-2 minutes than put it back in and try again)
So now your on a custom rom. Many roms got the setup so of needed go thru setup procedure and welcome on your costum droid Xperia x10
After setup or after first enter on home screen reboot device first before you install anythinG it settles the rom to work better/properly
For notice most custom roms need a few hours to settle so dont be to hasty if something doesnt work right properly.
If i helped feel free to thank me
If you dont know which rom to use feel free to pm me i tried many ^^
greets darkmind
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
djRemov said:
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
Click to expand...
Click to collapse
is it mini or live with walkman & also NeroICS v2 only support Mini Pro..... sorry buddy!!!! yhu gonna need to use flashtool to flash yur phone.
Sent from my Mini Pro using XDA Premium
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Check that topic, try the solutions posted there.
I sent mine to service already, ROM testing killed the touchscreen.
Problem solved!
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
neocyke said:
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
Click to expand...
Click to collapse
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Do you guys have a link for the Mini Pro ROM? I'm desperate now.. =(
I still have a HYBROMAN v16 do you think that would work?
EDIT: I was able to download HYBROM_V12 but CWM keeps saying that the file is bad. Downloaded and re downloaded at least 10x now.. Any ideas?
UPDATE: For those who are having problems with their touchscreen, this method works! (finally found a working version of hybrom_v12)
@djRemov: You are a god!
djRemov said:
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Click to expand...
Click to collapse
Lemme see if I understand this right. Basically, what it does is overwrite the hex file and starts the touchscreen script? In which case it continues from the hybrom flash and replaces the hex from the minipro with the lww one?
WT19i Touchscreen Issue Solved
Solution
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) Switch on by connecting usb cable to your computer by press and hold the volume up button on your mobile for Fastboot mode . Download and extract the kernel file which i attached with this post
(kernel_coconut-v4.zip) and flash it via Fastboot Mode in Flash Tool.
4) Switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
So sad, i did but my lww still dont work, only power+walkman+home+volume buttons work.
are there any other ways to fix that problems.
and pls share hybrom_V12 for minipro. i can't search it. so i did with v10.
lww screen cant use
not work master,, any solution for me,,??
please help me master,,
djRemov said:
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Click to expand...
Click to collapse
:good:
Touch Screen Not Working SK17i
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Dear Buddy tried your method as well but still no success ????????
non of the solutions seemed to work, maybe we're facing a hardware problem
ironhide3.2 said:
non of the solutions seemed to work, maybe we're facing a hardware problem
Click to expand...
Click to collapse
try this its working .. i have been tested it twice:good::good::good::good::good::good::good:
Things we need:
Flash tools
Rage kernel gb
Stock .62 firmware for your device(ftf)
wrong rom that bricked your touchscreen
What should we do:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
6:if touch screen fixed,press thanks button
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Can i use this touchscreen.zip for my st15i with the same prob???
hey friends, need help..
i'm relatively new to android, and i had rooted neo v running on ICS. i wanted to install custom rom for JB, so i installed clockwork mod recovery, backed up current os wiped all cache and selected zip file from sd card.... it took some time and then said installation failed,,..i tried again, and again said failed.... so i just restarted my phone.... from then onwards it's stuck on sony logo.. when i connect to charger or pc, green light lits up for a while and then phone automatically boots up and gets stuck at sony logo.....
i tried to enter into clockwork recovery mode but it wouldn't..
help me !!!!!!!!!!!!! now i just want want my old phone back with ICS..
i'm new so please explain in simplified terms.,,,,
sorry for inconvinence...
thankx
I had the same problen and fixed it. So first you will need a stock firmware of ICS (find it on google can't provide link because I am using phone...sorry) then you will need latest Flashtool version (download it on google too).
Once you have everything downloaded follow the steps.
1)Instal Flashtool (it's easy)
2)Then open it and navigate folder with name Firmwares.
3)Put in this folder the .ftf file you downloaded (I mean the stock Firmware) Plug the phone in and wait while Flashtool will recognize your phone. IF not instal ADB drivers
4)Then open Flashtool and hit the button with the lightning
5)Choose flashmode
6)Then choose the firmware you puted in the folder.
7)Follow the on-screen instructions and you have your phone back
Reply if I helped you!!!
Sent from my MT11i using xda app-developers app
I will find out if u helped me however reply is not as prominent as it is at android central bud :silly:
Peleus16 said:
I had the same problen and fixed it. So first you will need a stock firmware of ICS (find it on google can't provide link because I am using phone...sorry) then you will need latest Flashtool version (download it on google too).
Once you have everything downloaded follow the steps.
1)Instal Flashtool (it's easy)
2)Then open it and navigate folder with name Firmwares.
3)Put in this folder the .ftf file you downloaded (I mean the stock Firmware) Plug the phone in and wait while Flashtool will recognize your phone. IF not instal ADB drivers
4)Then open Flashtool and hit the button with the lightning
5)Choose flashmode
6)Then choose the firmware you puted in the folder.
7)Follow the on-screen instructions and you have your phone back
Reply if I helped you!!!
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
i got the same problem also . i'm a total noob.
but in most unfortunate way .
my phone stucked on sony logo and keep restarting all over again .
i've unlocked the bootloader , trying to flash an ics kernel using flashtool . then it became this . i have no cwm or any recovery . help me please
San1143 said:
hey friends, need help..
i'm relatively new to android, and i had rooted neo v running on ICS. i wanted to install custom rom for JB, so i installed clockwork mod recovery, backed up current os wiped all cache and selected zip file from sd card.... it took some time and then said installation failed,,..i tried again, and again said failed.... so i just restarted my phone.... from then onwards it's stuck on sony logo.. when i connect to charger or pc, green light lits up for a while and then phone automatically boots up and gets stuck at sony logo.....
i tried to enter into clockwork recovery mode but it wouldn't..
help me !!!!!!!!!!!!! now i just want want my old phone back with ICS..
i'm new so please explain in simplified terms.,,,,
sorry for inconvinence...
thankx
Click to expand...
Click to collapse
u can just reflash your kernel and restore your backup from recovery. if u used x-parts or any app to install recovery it installs it to system partition. when u install a new rom it wipes your system partition.
if u haven't unlocked bootloader u have to flash stock firmware via flashtool. then install a recovery mode and restore your backup.
---------- Post added at 08:51 PM ---------- Previous post was at 08:46 PM ----------
jibbyjib said:
i got the same problem also . i'm a total noob.
but in most unfortunate way .
my phone stucked on sony logo and keep restarting all over again .
i've unlocked the bootloader , trying to flash an ics kernel using flashtool . then it became this . i have no cwm or any recovery . help me please
Click to expand...
Click to collapse
u maybe using an incompatible kernel. try reflashing it via flashtool. if it doesn't works use fastboot commands from command prompt or a terminal.