Hello,
I have install and flash this ICS leak:
http://forum.xda-developers.com/showthread.php?t=1688241
Everything works fine but now my phone is not rebooting anymore? i try to reflash the rom at: http://forum.xda-developers.com/showthread.php?t=1688241 but i get a lot of errors.
Flashing with RSD lite is not working anymore?
Get: failed flashing process.
What can i do or try to get my phone back to working?
my phone hangs in a bootloop.
zenilygy said:
Hello,
I have install and flash this ICS leak:
http://forum.xda-developers.com/showthread.php?t=1688241
Everything works fine but now my phone is not rebooting anymore? i try to reflash the rom at: http://forum.xda-developers.com/showthread.php?t=1688241 but i get a lot of errors.
Flashing with RSD lite is not working anymore?
Get: failed flashing process.
What can i do or try to get my phone back to working?
my phone hangs in a bootloop.
Click to expand...
Click to collapse
1. unzip your rom 2.3.6 in folder of your choice
2. unzip flash utility in this folder
3. Flash your rom 2.3.6 with this do not cancel wait with erros.. no problem http://dlhg.eternityproject.eu/mtspyder/EPRJ_FlashITRZR_Windows.tar
4. After flash your phone enter in recovery mode
5. wait recovery open click in vol + vol -
6. reboot your phone
7. press vol + vol - and power botton select recovery newerly
8. in recovery mode select install zip and choose zip and reinstall OTA ICS update
zenilygy said:
Hello,
I have install and flash this ICS leak:
http://forum.xda-developers.com/showthread.php?t=1688241
Everything works fine but now my phone is not rebooting anymore? i try to reflash the rom at: http://forum.xda-developers.com/showthread.php?t=1688241 but i get a lot of errors.
Flashing with RSD lite is not working anymore?
Get: failed flashing process.
What can i do or try to get my phone back to working?
my phone hangs in a bootloop.
Click to expand...
Click to collapse
Just follow the instructions on Post Nr. 6 in the Thread you've linked and you will be fine.
Gesendet von meinem XT910 mit Tapatalk 2
Hi,
Thanks for the fast reply and tutorial.
I have follow your steps and this is what i get:
www .zenid.net/android/flash.jpg (sorry new user i can not post links.)
as you can see the: boot and recovery and cdrom won't flash.
The Boot can't flash, because it isn't patched!
Like i sad > post Nr. 6 is your way back to an working RazR
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
The Boot can't flash, because it isn't patched!
Like i sad > post Nr. 6 is your way back to an working RazR
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Hello,
What you mean with: Like i sad > post Nr. 6 is your way back to an working RazR ?
HSD-Pilot said:
Just follow the instructions on Post Nr. 6 in the Thread you've linked and you will be fine.
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Go back into the Thread for the Leak and scroll down to Post Nr. 6 > From T-Mobile to Retail. Forget the Part about T-Mobile and just do it
HSD-Pilot said:
Go back into the Thread for the Leak and scroll down to Post Nr. 6 > From T-Mobile to Retail. Forget the Part about T-Mobile and just do it
Click to expand...
Click to collapse
Yeah you are my man dude! i have a working device! Thank you!
So what to do now? is this the latest ICS version to run? or do i now need to update with this version?
http://forum.xda-developers.com/showthread.php?t=1688241
Moved to correct sub forum....
zenilygy said:
Yeah you are my man dude! i have a working device! Thank you!
So what to do now? is this the latest ICS version to run? or do i now need to update with this version?
http://forum.xda-developers.com/showthread.php?t=1688241
Click to expand...
Click to collapse
No need for anything. This is the latest Retail en. EU Leak
Gesendet von meinem XT910 mit Tapatalk 2
Thanks
Related
I have put posts in other section of this forum and have had responses from different people ghanks to those who answered.my problem is I flashed a nandroid 2.36 over china 4.04 which resulted in boot logo black screen.after just about trying everything I am now in a postion where I can flash the system.img etc of SPDREM u 01.6.5.1.167 (beleiving this to be the default rom for uk.rsd lite wont flash the xml resuling in 1/11 flash cdt.bin fail.flash it flashes all but devtree,boot,recovery (writing error) and preinstall error bigger than partition.can some one please help me get my phone up and running again,not bothered which android version just so long as I can upgrade to official ics when available.many thanksin advance.
Perhaps this might help you, too:
http://forum.xda-developers.com/showpost.php?p=27056296&postcount=19
Do I need to have a working razr to get this?
you will need 651.167.26.XT910.Retail.en.EU and Blur_Version.651.167.26.XT910.Retail.en.EU.zip from there: xda, rsd lite from xda and root + recovery zip from here:xda. Then you should have all files you need to do this.
sorry for being the noob i dont quite follow,got the files but one appears to be spdrem 01.6.5.1-167 flashing this with rsd gives cdt.bin fail ????????
Watch pm
Gesendet von meinem XT910 mit Tapatalk 2
Everyone having problems like that pm me
I found on sbf website file for rsd with ics for europe - in my opinion it will be oficial version of ICS for RAZR.
i don't install this because i have nonEFIGSRetail.en.EU in my razr
http://sbf.droid-developers.org/
Download
http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
Thank you for this but It is a link from
http://forum.xda-developers.com/showthread.php?t=1747800
Eternity project
sbf. droid-developers.org is free for all! No need to register for download :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
Moved to General
Why are all these files >600MB in size? I thought the ICS OTA update was only 300-400MB
sha_tan said:
Why are all these files >600MB in size? I thought the ICS OTA update was only 300-400MB
Click to expand...
Click to collapse
They removed the webtop partition
underface said:
I found on sbf website file for rsd with ics for europe - in my opinion it will be oficial version of ICS for RAZR.
i don't install this because i have nonEFIGSRetail.en.EU in my razr
http://sbf.droid-developers.org/
Download
http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
Click to expand...
Click to collapse
i installed it , i had also nonEFIG GB first , now i run downloaded sbf ICS works smooth & fine
hi
tired to flash other roms i flashed cm12 unofficial but when i turn on phone and press the power butten it will reboot:|
the message app always stops
and the music app too
wifi not working
and...
i want to fix wifi problem to update it with cyanogenmod ota updates
what should i do?
These problems may are bugs of your ROM? Which ROM are you using? I recommend this one:
http://forum.xda-developers.com/gal...ives/rom-cyanogenmod-12-t2955551/post57100306
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
THX for your response
but when i connet device to odin via downloadmod odin not reconized it
and this rom does not have a recovery!
so iwant a way to fix the wifi problem and update it via ota
Some more experienced users say installing another kernel might help, because WiFi drivers are included in kernel... But difficult without Odin... Perhaps check out the thread about Odin connection problems:
http://forum.xda-developers.com/showthread.php?p=43132016
Or try the Flashify app or Mobile Odin from Play Store for flashing another kernel. Hope this helps. I'm not a pro, but better any answer than no one
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
wich kernel do you think is best
I can't especially recommend one, because I didn't install one yet. But search for Dorinmanx or Gustavo's kernel. Those are the most used kernels I think.
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
thx
now i want back to the stock rom
what should i do?
Sepehr619 said:
thx
now i want back to the stock rom
what should i do?
Click to expand...
Click to collapse
If you want to go back to stock rom, you will have to download the stock rom if you haven't already from sammobile or any other similar website. You will have to flash the file with ODIN then factory reset. (You can brick your device if you have brickbug affected chip and unpatched rom like some ICS firmwares, 4.1.2JB is the android version you want to downgrade to).
gsstudios said:
If you want to go back to stock rom, you will have to download the stock rom if you haven't already from sammobile or any other similar website. You will have to flash the file with ODIN then factory reset. (You can brick your device if you have brickbug affected chip and unpatched rom like some ICS firmwares, 4.1.2JB is the android version you want to downgrade to).
Click to expand...
Click to collapse
thx for your response
i know how to do it
my problem is odin not recognizing my phone in download mod
what should i do
I think there's no other way than flashing another kernel, for example with Flashify. Most kernels also include a recovery. Then it is simple to flash the stock ROM via recovery (if you have the ROM as a zip file).
Hope this helps.
Gesendet von meinem GT-I9100
BenjyTec said:
I think there's no other way than flashing another kernel, for example with Flashify. Most kernels also include a recovery. Then it is simple to flash the stock ROM via recovery (if you have the ROM as a zip file).
Hope this helps.
Gesendet von meinem GT-I9100
Click to expand...
Click to collapse
thx for you response
i flashe this:
http://forum.xda-developers.com/gal...d-12s-os12-t3089916/post62094237#post62094237
wifi works in the first boot
but after a reboot wifi not works
Is any way to unlock the bootloader ? 'couse i cant install custom roms
When i tried to know from the cmd with the command fastboot from motorola it gave me error
Any other idea maybe?
Or toss it in the subway haha
TIA
Well, you didn't read any faq I guess.. Just a few words:
Root, safestrap 3.76. Start with rooting, then install latest Safestrap and you will be able to install custom roms, kernel, whatever you need.
Gesendet von meinem XT910 mit Tapatalk
dtrail1 said:
Well, you didn't read any faq I guess.. Just a few words:
Root, safestrap 3.76. Start with rooting, then install latest Safestrap and you will be able to install custom roms, kernel, whatever you need.
Gesendet von meinem XT910 mit Tapatalk
Click to expand...
Click to collapse
Yes i did!
But didnt find how to flash with locked bootloader
Safestrap 3.76? i tried to find it, but no luck or you tried to put 3.75?
In my case, last time i tried to flash the stock rom it gave me FAILED (Safestrap 3.75 CM12.1)
Do you think i have to create a new rom slot and flash it there?
TIA
ecobreaks said:
Yes i did!
But didnt find how to flash with locked bootloader
Safestrap 3.76? i tried to find it, but no luck or you tried to put 3.75?
In my case, last time i tried to flash the stock rom it gave me FAILED (Safestrap 3.75 CM12.1)
Do you think i have to create a new rom slot and flash it there?
TIA
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3181430
Installing and using Safestrap 3.75 (2015)
---------- Post added at 07:55 PM ---------- Previous post was at 07:51 PM ----------
http://forum.xda-developers.com/droid-razr/help/frequently-questions-motorola-razr-t3069077
I'm currently trying to install roms again and my Oneplus X that I previously uninstalled TWRP from and have succeeded in unlocking the bootloader but on every recovery I've tried keep getting the message "FAILED (remote: dtb not found)"
What is your current OS and Recovery?
Gesendet von meinem ONE E1003 mit Tapatalk
mcmarius said:
What is your current OS and Recovery?
Gesendet von meinem ONE E1003 mit Tapatalk
Click to expand...
Click to collapse
Oxygen OS and installing the recovery is the issue, currently on the default
OOS2 or 3?
Gesendet von meinem ONE E1003 mit Tapatalk
mcmarius said:
OOS2 or 3?
Gesendet von meinem ONE E1003 mit Tapatalk
Click to expand...
Click to collapse
3.1.1
mcmarius said:
OOS2 or 3?
Gesendet von meinem ONE E1003 mit Tapatalk
Click to expand...
Click to collapse
Thank you, I solved this using a specific twrp file.
lordchuck said:
Thank you, I solved this using a specific twrp file.
Click to expand...
Click to collapse
I have the same problem, could you pass me that TWRP?
Brother try using this TWRP -
http://forum.xda-developers.com/devdb/project/dl/?id=20236
Hi all, I'm experiencing the same problem after flashing a E1001 with Ox3: recovery boot gets stuck on OnePlus logo, and running fastboot boot twrp.zip results in Dtb not found..
Tried with stock recovery, but still no luck..
Did somebody succeed in fixing?
I don't want to hard reset!
aadnanrulz said:
Brother try using this TWRP -
http://forum.xda-developers.com/devdb/project/dl/?id=20236
Click to expand...
Click to collapse
I confirm it works perfectly.. Brilliant!! [emoji106]
Bluspark is being booted flawlessly both from recovery and fastboot.
Now I'd like to see why.. I've always been running with twrp Bluspark (older version 2.8.7.0), then recently I updated to the latest stable Twrp for onyx from twrp.me (twrp-3.0.2-0-onyx.img)
When installed aside ox2.2.3 it was perfectly working, so I flashed from it the new Ox3.. From that on, given that Android is working perfectly (BTW, Marsh makes a difference! Very very good.. ), Twrp suddenly stopped booting.
Trying around I noticed that "dtb not found" error..
Anybody can explain, so that we can avoid this in the future? What this dtb thing is??
.. And of course thanks a lot, you made my day guys!! [emoji106] [emoji106]
dr.prodigy said:
Hi all, I'm experiencing the same problem after flashing a E1001 with Ox3: recovery boot gets stuck on OnePlus logo, and running fastboot boot twrp.zip results in Dtb not found..
Tried with stock recovery, but still no luck..
Did somebody succeed in fixing?
I don't want to hard reset!
Click to expand...
Click to collapse
Either u have to flash oos3 stock recovery or bluespark v41.. Those are the only two recoveries currently working in oos3 bootloader.. Official twrp not yet supported for oos3
Yes, indeed, I noticed..
Now question is: why is recovery accessing data on system partition (which should be why it's failing looking for dtb.. It seems on OO2 is there, and on OO3 isn't anymore, or is somewhere else perhaps)?
I mean.. Recovery sw is meant for recovering sys etc.. How could it do it, if it relies on some sys partition data? Am I losing something? [emoji53]