hi
tired to flash other roms i flashed cm12 unofficial but when i turn on phone and press the power butten it will reboot:|
the message app always stops
and the music app too
wifi not working
and...
i want to fix wifi problem to update it with cyanogenmod ota updates
what should i do?
These problems may are bugs of your ROM? Which ROM are you using? I recommend this one:
http://forum.xda-developers.com/gal...ives/rom-cyanogenmod-12-t2955551/post57100306
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
THX for your response
but when i connet device to odin via downloadmod odin not reconized it
and this rom does not have a recovery!
so iwant a way to fix the wifi problem and update it via ota
Some more experienced users say installing another kernel might help, because WiFi drivers are included in kernel... But difficult without Odin... Perhaps check out the thread about Odin connection problems:
http://forum.xda-developers.com/showthread.php?p=43132016
Or try the Flashify app or Mobile Odin from Play Store for flashing another kernel. Hope this helps. I'm not a pro, but better any answer than no one
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
wich kernel do you think is best
I can't especially recommend one, because I didn't install one yet. But search for Dorinmanx or Gustavo's kernel. Those are the most used kernels I think.
Gesendet von meinem GT-I9100 mit Hilfe von XDA Forums Pro.
thx
now i want back to the stock rom
what should i do?
Sepehr619 said:
thx
now i want back to the stock rom
what should i do?
Click to expand...
Click to collapse
If you want to go back to stock rom, you will have to download the stock rom if you haven't already from sammobile or any other similar website. You will have to flash the file with ODIN then factory reset. (You can brick your device if you have brickbug affected chip and unpatched rom like some ICS firmwares, 4.1.2JB is the android version you want to downgrade to).
gsstudios said:
If you want to go back to stock rom, you will have to download the stock rom if you haven't already from sammobile or any other similar website. You will have to flash the file with ODIN then factory reset. (You can brick your device if you have brickbug affected chip and unpatched rom like some ICS firmwares, 4.1.2JB is the android version you want to downgrade to).
Click to expand...
Click to collapse
thx for your response
i know how to do it
my problem is odin not recognizing my phone in download mod
what should i do
I think there's no other way than flashing another kernel, for example with Flashify. Most kernels also include a recovery. Then it is simple to flash the stock ROM via recovery (if you have the ROM as a zip file).
Hope this helps.
Gesendet von meinem GT-I9100
BenjyTec said:
I think there's no other way than flashing another kernel, for example with Flashify. Most kernels also include a recovery. Then it is simple to flash the stock ROM via recovery (if you have the ROM as a zip file).
Hope this helps.
Gesendet von meinem GT-I9100
Click to expand...
Click to collapse
thx for you response
i flashe this:
http://forum.xda-developers.com/gal...d-12s-os12-t3089916/post62094237#post62094237
wifi works in the first boot
but after a reboot wifi not works
Related
Hello,
I have install and flash this ICS leak:
http://forum.xda-developers.com/showthread.php?t=1688241
Everything works fine but now my phone is not rebooting anymore? i try to reflash the rom at: http://forum.xda-developers.com/showthread.php?t=1688241 but i get a lot of errors.
Flashing with RSD lite is not working anymore?
Get: failed flashing process.
What can i do or try to get my phone back to working?
my phone hangs in a bootloop.
zenilygy said:
Hello,
I have install and flash this ICS leak:
http://forum.xda-developers.com/showthread.php?t=1688241
Everything works fine but now my phone is not rebooting anymore? i try to reflash the rom at: http://forum.xda-developers.com/showthread.php?t=1688241 but i get a lot of errors.
Flashing with RSD lite is not working anymore?
Get: failed flashing process.
What can i do or try to get my phone back to working?
my phone hangs in a bootloop.
Click to expand...
Click to collapse
1. unzip your rom 2.3.6 in folder of your choice
2. unzip flash utility in this folder
3. Flash your rom 2.3.6 with this do not cancel wait with erros.. no problem http://dlhg.eternityproject.eu/mtspyder/EPRJ_FlashITRZR_Windows.tar
4. After flash your phone enter in recovery mode
5. wait recovery open click in vol + vol -
6. reboot your phone
7. press vol + vol - and power botton select recovery newerly
8. in recovery mode select install zip and choose zip and reinstall OTA ICS update
zenilygy said:
Hello,
I have install and flash this ICS leak:
http://forum.xda-developers.com/showthread.php?t=1688241
Everything works fine but now my phone is not rebooting anymore? i try to reflash the rom at: http://forum.xda-developers.com/showthread.php?t=1688241 but i get a lot of errors.
Flashing with RSD lite is not working anymore?
Get: failed flashing process.
What can i do or try to get my phone back to working?
my phone hangs in a bootloop.
Click to expand...
Click to collapse
Just follow the instructions on Post Nr. 6 in the Thread you've linked and you will be fine.
Gesendet von meinem XT910 mit Tapatalk 2
Hi,
Thanks for the fast reply and tutorial.
I have follow your steps and this is what i get:
www .zenid.net/android/flash.jpg (sorry new user i can not post links.)
as you can see the: boot and recovery and cdrom won't flash.
The Boot can't flash, because it isn't patched!
Like i sad > post Nr. 6 is your way back to an working RazR
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
The Boot can't flash, because it isn't patched!
Like i sad > post Nr. 6 is your way back to an working RazR
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Hello,
What you mean with: Like i sad > post Nr. 6 is your way back to an working RazR ?
HSD-Pilot said:
Just follow the instructions on Post Nr. 6 in the Thread you've linked and you will be fine.
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Go back into the Thread for the Leak and scroll down to Post Nr. 6 > From T-Mobile to Retail. Forget the Part about T-Mobile and just do it
HSD-Pilot said:
Go back into the Thread for the Leak and scroll down to Post Nr. 6 > From T-Mobile to Retail. Forget the Part about T-Mobile and just do it
Click to expand...
Click to collapse
Yeah you are my man dude! i have a working device! Thank you!
So what to do now? is this the latest ICS version to run? or do i now need to update with this version?
http://forum.xda-developers.com/showthread.php?t=1688241
Moved to correct sub forum....
zenilygy said:
Yeah you are my man dude! i have a working device! Thank you!
So what to do now? is this the latest ICS version to run? or do i now need to update with this version?
http://forum.xda-developers.com/showthread.php?t=1688241
Click to expand...
Click to collapse
No need for anything. This is the latest Retail en. EU Leak
Gesendet von meinem XT910 mit Tapatalk 2
Thanks
So i have the siyahkernel 1.2.6 and i want to install the new stable one 1.3.8 and i just wanted to ask if it will brick the phone, when i just flash over a custom kernel, while i have one installed. Do i have to flash the stock kernel again, and flash the 1.3.8 then?
BeefTrust said:
So i have the siyahkernel 1.2.6 and i want to install the new stable one 1.3.8 and i just wanted to ask if it will brick the phone, when i just flash over a custom kernel, while i have one installed. Do i have to flash the stock kernel again, and flash the 1.3.8 then?
Click to expand...
Click to collapse
No, just flash it, I'm always upgrading kernel that way (or even switch between different kernels) without any problem.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Heyyy, so i just came back to android and felt like flashing some kitkat roms so as to enjoy those cool features kitkat offers..i'm currently running stock 4.1.2 JB.
as far as im concerned, first i should flash a rooted+cwm kernel through odin (which i flashed latest siyah for JB)... that went smooth and i got rooted and got cwm, problem is when i want to actually install any rom... I continually get "installation aborted" and the only way to make my phone usable again is to flash a stock firmware through odin.
any ideas ? thanks !
PD: I tried installing the "kitkat cwm compatible" thingy both through odin and through cwm, it did flash correctly, but phone fails to boot. if you dont get this last thing.. its this: http://forum.xda-developers.com/showthread.php?t=2546597
hope anyone out there can give me a hand since im tired of running stock :'(
check the OP again
have you read the OP before flashing KK custom rom. maybe u miss some part to flash it.
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
You can flash philz kernel on to of your stock JB to get root and recovery (no need to use Odin, you can flash through standard recovery). Then do a backup of your rom and after that flash a cwm-recovery >6.0.4.x (this is needed to be able to install s KitKat ROM). Boot directly after flashing into that recovery, wipe system and data and install KitKat.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Poroto said:
Thanks for the info, i went to the philz kernel thread but i cannot seem to know which file should i download, he says i should look at the kernel code or something like that but i fail to find such thing, any idea ? pleasee. thanks
Click to expand...
Click to collapse
Look in settings - about phone (or take a screenshot and post it here)
Christiaan91 said:
Look in settings - about phone (or take a screenshot and post it here)
Click to expand...
Click to collapse
There goes the screenshot! Thanks!
Poroto said:
There goes the screenshot! Thanks!
Click to expand...
Click to collapse
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
I've got more information there.
Do you know what firmware you installed?
Or you can flash dorimanx kernel through Odin. It also gives you root access. Download this:
Kernel_Dorimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
If you don't know how to flash it through Odin, look in the op of the dorimanx kernel thread. Just above the download links it's explained.
After that follow the instructions from AndDiSa by flashing a kitkat compatible cwm etc.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Poroto said:
i did that and now im running kitkat resurrection remix ! thanks a bunch !!
Solved .
Click to expand...
Click to collapse
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Christiaan91 said:
Good to hear. Please add [SOLVED] to the thread title.
Verstuurd vanaf mijn GT-I9100 met Tapatalk
Click to expand...
Click to collapse
Done.
Hey guys, i've flashed RR 5.0.2 on my D802 and i wanted to flash a newer Version of twrp with flashify but after that i just got this message while booting Into recovery "Secure booting error Error: Boot Certification Verify!" i can Boot the Rom but a Rom without a custom recovery..? I am on 5.0.2 lollipop so i guess autorec wont work..
Please please help me!
Gesendet von meinem LG-D802 mit Tapatalk
used AutoRec my friend, after that reboot to recovery and flashed D802-TWRP 2.8.5.1 Bumped by blastagator
fLipz said:
used AutoRec my friend, after that reboot to recovery and flashed D802-TWRP 2.8.5.1 Bumped by blastagator
Click to expand...
Click to collapse
Are you sure it will work with 5.0.2?
I've used autorec on 4.2.2 to get TWRP, dont know if its support lollipop
Gesendet von meinem LG-D802 mit Tapatalk
ViruuZ said:
Are you sure it will work with 5.0.2?
I've used autorec on 4.2.2 to get TWRP, dont know if its support lollipop
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
I dont know or flashify works. The reason why it didnt worked was because you didnt had a bumped recovery. Blastagators twrp is bumped so use the latest version from him.
wulsic said:
I dont know or flashify works. The reason why it didnt worked was because you didnt had a bumped recovery. Blastagators twrp is bumped so use the latest version from him.
Click to expand...
Click to collapse
So u mean i should use autorec to get twrp 2.7.0.0 and then i should flash the bumped recovery? Does autorec work on 5.0.2?
Gesendet von meinem LG-D802 mit Tapatalk
Boot error
The AUTOREC works in roms 5.0.1 LG G2 stocks. more 'm not sure it should work in AOSP roms. the only thing I know, did you incorrectly spent recovery.img image
I'm currently trying to install roms again and my Oneplus X that I previously uninstalled TWRP from and have succeeded in unlocking the bootloader but on every recovery I've tried keep getting the message "FAILED (remote: dtb not found)"
What is your current OS and Recovery?
Gesendet von meinem ONE E1003 mit Tapatalk
mcmarius said:
What is your current OS and Recovery?
Gesendet von meinem ONE E1003 mit Tapatalk
Click to expand...
Click to collapse
Oxygen OS and installing the recovery is the issue, currently on the default
OOS2 or 3?
Gesendet von meinem ONE E1003 mit Tapatalk
mcmarius said:
OOS2 or 3?
Gesendet von meinem ONE E1003 mit Tapatalk
Click to expand...
Click to collapse
3.1.1
mcmarius said:
OOS2 or 3?
Gesendet von meinem ONE E1003 mit Tapatalk
Click to expand...
Click to collapse
Thank you, I solved this using a specific twrp file.
lordchuck said:
Thank you, I solved this using a specific twrp file.
Click to expand...
Click to collapse
I have the same problem, could you pass me that TWRP?
Brother try using this TWRP -
http://forum.xda-developers.com/devdb/project/dl/?id=20236
Hi all, I'm experiencing the same problem after flashing a E1001 with Ox3: recovery boot gets stuck on OnePlus logo, and running fastboot boot twrp.zip results in Dtb not found..
Tried with stock recovery, but still no luck..
Did somebody succeed in fixing?
I don't want to hard reset!
aadnanrulz said:
Brother try using this TWRP -
http://forum.xda-developers.com/devdb/project/dl/?id=20236
Click to expand...
Click to collapse
I confirm it works perfectly.. Brilliant!! [emoji106]
Bluspark is being booted flawlessly both from recovery and fastboot.
Now I'd like to see why.. I've always been running with twrp Bluspark (older version 2.8.7.0), then recently I updated to the latest stable Twrp for onyx from twrp.me (twrp-3.0.2-0-onyx.img)
When installed aside ox2.2.3 it was perfectly working, so I flashed from it the new Ox3.. From that on, given that Android is working perfectly (BTW, Marsh makes a difference! Very very good.. ), Twrp suddenly stopped booting.
Trying around I noticed that "dtb not found" error..
Anybody can explain, so that we can avoid this in the future? What this dtb thing is??
.. And of course thanks a lot, you made my day guys!! [emoji106] [emoji106]
dr.prodigy said:
Hi all, I'm experiencing the same problem after flashing a E1001 with Ox3: recovery boot gets stuck on OnePlus logo, and running fastboot boot twrp.zip results in Dtb not found..
Tried with stock recovery, but still no luck..
Did somebody succeed in fixing?
I don't want to hard reset!
Click to expand...
Click to collapse
Either u have to flash oos3 stock recovery or bluespark v41.. Those are the only two recoveries currently working in oos3 bootloader.. Official twrp not yet supported for oos3
Yes, indeed, I noticed..
Now question is: why is recovery accessing data on system partition (which should be why it's failing looking for dtb.. It seems on OO2 is there, and on OO3 isn't anymore, or is somewhere else perhaps)?
I mean.. Recovery sw is meant for recovering sys etc.. How could it do it, if it relies on some sys partition data? Am I losing something? [emoji53]