I have basband version xxle8 - i want to change that to a new radio version. Where can i find radios?
007shaolin said:
I have basband version xxle8 - i want to change that to a new radio version. Where can i find radios?
Click to expand...
Click to collapse
Stock rom thread .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Related
hello guys
i am new to android OS...that means a n00b... but i have successfully root my phone with this kernel http://forum.xda-developers.com/showthread.php?t=1075278
currently Kies gives me this info:
Current firmware version: PDA:KE2 / PHONE:KE2 / CSC:KD1 (VNO)
Baseband ver: I9100UHKE2
Kernel version: 2.6.35.7-I9100XWKE2-CL187606 [email protected] #2
Android ver: 2.3.3
Build number: GINGERBREAD.UHKE2
what i would like to do now is to update to the latest firmware is that possible?
thanks
Hi,
If Kies shows no update, you'll have to go the route of manually updating via Odin.
This guide shows you how, don't make the mistake I did of downloading the kernel only tar file - you need the big file around 250/260 MB.
http://forum.xda-developers.com/showthread.php?t=1075278
bracketb4d said:
Hi,
If Kies shows no update, you'll have to go the route of manually updating via Odin.
This guide shows you how, don't make the mistake I did of downloading the kernel only tar file - you need the big file around 250/260 MB.
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Hi,
but this file has the latest firmware in it? because from the info:
UHKE2
Firmware info
PDA:UHKE2
PHONE:UHKE2
Build date: 11/05/2011
Generic CHO (Chile): http://www.multiupload.com/J3L6OOPXC7
UHKE2 Stock Kernel:http://www.multiupload.com/18GRITPN4M
Password: [email protected]
the build date is 11/05/2011 is almost same as the 1 current i am using...?
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
DM-Man said:
Hi,
but this file has the latest firmware in it? because from the info:
UHKE2
Firmware info
PDA:UHKE2
PHONE:UHKE2
Build date: 11/05/2011
Generic CHO (Chile): http://www.multiupload.com/J3L6OOPXC7
UHKE2 Stock Kernel:http://www.multiupload.com/18GRITPN4M
Password: [email protected]
the build date is 11/05/2011 is almost same as the 1 current i am using...?
Click to expand...
Click to collapse
Hi DM-Man,
As far as I know there is no official update for any Chilean device.
The only way to enjoy other versions is as already said to "manually" change via odin.
The "Chile thread" can be found here: http://forum.xda-developers.com/showthread.php?t=1104410
Best regards.
JJEgan said:
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
Click to expand...
Click to collapse
thanks for the info...but from what i read is any way if i change the CSC that it could pick up the updates?
JJEgan said:
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
Click to expand...
Click to collapse
can you assist me as to summarize which kernel & rom i will need if i update it manually?
DM-Man said:
thanks for the info...but from what i read is any way if i change the CSC that it could pick up the updates?
Click to expand...
Click to collapse
You can always update through Odin and get the latest software from e.g. Intratech's ROM thread. Carriers usually do not update that frequently and you may be stuck a long time to a version.
If you want to use the Chilean CSC then you have either the old seldom updateable official ROM option or you have an always manually updateable "Frankenstein" ROM option.
Hello guys i am new to this forum and i have question.
I have some problems with my S3, now i want to return it.
My phone was rooted now its stock (download mode is normaal and system status too.)
The only problem i have is that the baseband version is different!
Does this matter for my warranty??
If this does how can i see my of baseband version because i don't remember it.
My phone is unbranded and i live in the netherlands.
One last question i already updated my phone with Kies does Kies change baseband too?
thanks!
What are build and baseband versions as you can see in settings?
watsa said:
What are build and baseband versions as you can see in settings?
Click to expand...
Click to collapse
baseband
I9300XXLEF
BUILD
IMM76D.I9300XXALEF
EqicSnow said:
baseband
I9300XXLEF
BUILD
IMM76D.I9300XXALEF
Click to expand...
Click to collapse
baseband and build versions are ok. No need to worry about it. And yes kies can change baseband if there was a modem update included in firmware update
watsa said:
baseband and build versions are ok. No need to worry about it. And yes kies can change baseband if there was a modem update included in firmware update
Click to expand...
Click to collapse
thank you very much no i can return it!:good:
NOTE Warranty void .
If rooted if custom rom counter above zero if device status shows modified .
Baseband is not firmware its the modem .
LEF is your current firmware .
jje
JJEgan said:
NOTE Warranty void .
If rooted if custom rom counter above zero if device status shows modified .
Baseband is not firmware its the modem .
LEF is your current firmware .
jje
Click to expand...
Click to collapse
Thanks but i was already aware of that.
My phone custom rom counter says ''no'' and device status is normal.
I have firmware number I9100XWLP7 ICS 4.0.3. I want to downgrade to 2.3.6
For 2.3.6 theres no XWLP7 version so can i flash I9100XWKL1 version,will it affect my phones performance and stability
Yes you can flash it. No you shouldn't have any problems with it.
MistahBungle said:
Yes you can flash it. No you shouldn't have any problems with it.
Click to expand...
Click to collapse
Thank you
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
*#1234# does not work ?!
Ok, usually the PDA is the same as the Build version/number => DXLP9.
Maybe you have to reflash the kernel or the whole ROM to get the *#1234# work again on your phone.
Dial codes will only work only stock Samsung ROM's. With it being “build 4.2," I'll assume it isn't a stock Samsung ROM. Flash one if you wish to use these dial codes.
Sent from my GT-I9100 using Tapatalk 2
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
deleted
Sun90 said:
well ur PDA is DXLP9 same as ur baseband
u mean u want to try the jkay framewrk mod, if so u have to dwnld the one made for DXLP9 and flash the same and not any other build one
Click to expand...
Click to collapse
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
nickxxxx;is749702 said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I910DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Anyone else this this looks unusual?
Android Version: 4.0.3
Baseband Version: I9100XXKI3
Build Number: XWLPG V5.1.2
Click to expand...
Click to collapse
SwannyBhoy said:
Anyone else this this looks unusual?
Click to expand...
Click to collapse
Not really. Looks like a Gingerbread modem was flashed to an ICS firmware. That is only unusual in that it would never come like that packaged from Samsung. But it still should work just fine. Modems are cross compatible between Gingerbread and ICS.
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
.
Click to expand...
Click to collapse
well thank u for correcting me ma8
edited my post for the same
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Click to expand...
Click to collapse
Okay... got it.. also Jkay works with stock roms or custom roms which have support for it and i dont think that slim ics support it as of yet.
Thanks.
Galaxy S3
Kies show
Current firmware version : PDA:LL4 / PHONE:LKB / CSC:LK2 (XEF) This is Jelly Bean 4.1.2
Latest firmware version : PDA:MA2 / PHONE:LKB / CSC:LL1 (XEF) - what is this ? :cyclops:
PDA:MA2 / PHONE:LKB / CSC:LL1 (XEF) - also 4.1.2
An update to the current firmware
Updates to the firmware are not only for changing android version.
Sometimes it optimize battery life, performance or simply fix bugs
Sent from my GT-I9300 using xda premium
DJA2 said:
Galaxy S3
Kies show
Current firmware version : PDA:LL4 / PHONE:LKB / CSC:LK2 (XEF) This is Jelly Bean 4.1.2
Latest firmware version : PDA:MA2 / PHONE:LKB / CSC:LL1 (XEF) - what is this ? :cyclops:
Click to expand...
Click to collapse
Go ahead and start the update, its JB 4.1.2 too. :highfive:
EDaves aliam
is there an easy way to root this update ? i'm used to the CF-Root-SGS3-v6.2 and CF-Root-SGS3-v6.4 root package via Odin. i'm a noob with replacing the kernel and flashing and resetting the counter bla bla
SG S3 - international version - Telenet (operator) - Baseband version: I9300XXELKB
Can this update be downloaded?
Bump...
lildaddym said:
Bump...
Click to expand...
Click to collapse
Your post makes no sense what update .
JJEgan said:
Your post makes no sense what update .
Click to expand...
Click to collapse
This one: pda:ma1/phone ma1/csc:ma1(tmb)
lildaddym said:
This one: pda:ma1/phone ma1/csc:ma1(tmb)
Click to expand...
Click to collapse
It rly makes no sense. Wat do u mean if u can download it? Like u can thru kies?
Sent from my GT-I9300
lildaddym said:
This one: pda:ma1/phone ma1/csc:ma1(tmb)
Click to expand...
Click to collapse
Repeat your post makes no sense .
Downloads are on sammobile.com .
But i suggest you read the basic faqs and guides before playing about with stuff .
JJEgan said:
Repeat your post makes no sense .
Downloads are on sammobile.com .
But i suggest you read the basic faqs and guides before playing about with stuff .
Click to expand...
Click to collapse
I have been apprised that there is an update for my Note, but I don't know if I could download it instead of doing it OTA...I have Cyangemod installed, and the update won't work...I've looked on sammobile.com, and didn't see it...and thanks for the advice, but I think I have a handle on this stuff...
lildaddym said:
I have been apprised that there is an update for my Note, but I don't know if I could download it instead of doing it OTA...I have Cyangemod installed, and the update won't work...I've looked on sammobile.com, and didn't see it...and thanks for the advice, but I think I have a handle on this stuff...
Click to expand...
Click to collapse
Oh so u mean u have an ota update but u are on a custom rom? Just flash back to stock and u can update alr. U can download the stock firmware from sammobile
Sent from my GT-I9300