Is the a pre-rooted system .img for FW 73 yet?
I'm trying to root my phone but I can't seem to find a pre-rooted system .img for FW 73.
I don't want to try rooting my phone any other way because I'm not familiar with other ways.
Can anybody help me with this?
Which version? Would help if you posted for what region you are looking for or what customization number
Spectre51 said:
Which version? Would help if you posted for what region you are looking for or what customization number
Click to expand...
Click to collapse
Version is 6.0.A.3.73
Customization number says: 1257-1995_R4E
Region: NL or English version
Did you already look in the firmwares and root compilation thread in the dev section for that version?
http://forum.xda-developers.com/showthread.php?t=1599303
Related
the link of the ftf:
http://www.multiupload.com/XM3KBY1OLM
http://115.com/file/bhrmf4bq#SO-03C_4.0.D.2.61_docomo.ftf
Is there any information about this firmware?
Can you put the ftf on 115 please?
And is there anything about 4.0.2.A.0.62?
xutienan9520 said:
Can you put the ftf on 115 please?
And is there anything about 4.0.2.A.0.62?
Click to expand...
Click to collapse
其實我是從115搬過來的
actually i port this from 115
So what is it and what's the changelog if it's a firmware?
information about it http://www.wotanserver.com/en/sony-ericsson/se/xperia-ray-so-03c/4-0-d-2-61/language-download
possible flash on st18i (GSM/WCDMA)
that can be possible to flashed on st18i (GSM/WCDMA).
thanks.
Old version.
can you root this update ?
BASEBAND and android version is too old
It's Andoid 2.3.3
BASEBAND is 8x55A-AAABQOAZM-20302204-41
you can root with DooMLoRD's Easy rooting toolkit (v3.0).
This is Japanese official firmware which is for NTT DoCoMo SO-03C.
It's Android 2.33 version and bundled with many NTT DoCoMo Apps.
Hi guys,
I have an Neo unlocked with Night Elf 1.5 kernel and King's ROM.
But I don't think I have already flashed to .587 firmware even though everything is working correctly.
My "About Phone" screen shows:
8x55-AAABQQAZM-203028G-70 ==> so I think I don't have 587 ? Is this correct ?
Now what I don't know is :
What version of FTF for the .587 do I need to use ? ( I live in Belgium.)
I have downloaded this :
Xperia Neov_4.1.B.0.587_India SI 1254-8966 by abhiheart (376 MB)
and
MT15i_4.1.B.0.587_Global (only 236MB)
I don't know if I need to use these 2 that's why I am asking.
Could you guys give me an link to the correct one ?
PS: What JB roms are fully working because the overview thread hasn't been updated in a while
Thanks!
What you wrote above(from about phone screen) is baseband. It can be changed without changing entire build.
What you need to check is build number, but since you flashed custom ROM, I kinda doubt it have stock build number.
But if we can take assumption that you didn't changed baseband on your own, then no, you don't have .587, you have .562
Android 4.0.4; 4.1.B.0.587 have baseband 77
Android 4.0.4; 4.1.B.0.431 have baseband 72
Android 4.0.3; 4.1.A.0.562 have baseband 70 (which wasn't even officially out for Neo)
Android 2.3.4; 4.0.2.A.0.62 have baseband 64
Android 2.3.4; 4.0.2.A.0.42 have baseband 56
p.s. forgot to wrote, ftf's are in sticky thread in general section
Hi
Thanks no I do not know how to change it by myself , I only flash things ;
MT15i 4.1.B.0.587 NCB, Nordic, CDF-1247-0875
multiupload(TnX to MScorpionZ): http://forum.xda-developers.com/show...&postcount=121
OR
google docs(TnX to petulinka1): http://forum.xda-developers.com/show...&postcount=123
These 2 are in the general section
Are those both for my country?
Why do they have different sizes ? ~230 or ~360 ?
Thanks
Kind regards !
Well, Belgium is not in Nordic region. But if you ask if it will work on your phone then yes, it will.
And about file size, have you check entire filenames/extensions?
Hi
Both have the FTF extension.
But both have different file sizes so ... I don't know ?
Maybe off topic: are there fully working JB roms except the JB port by Paranoid ?
Thanks.
SleejR123 said:
Both have the FTF extension.
Click to expand...
Click to collapse
No, they are not. One is a zip, other one is ftf.
Yes that is true, but when you unpack the zipped one then the size is still different
Kind regards
Ah, now I see what you were saying. Don't worry, files inside ftf are same size.
In few latest flashtool versions(to be more precise in 0.9.1.0 and above), created ftf's are compressed, while in older they were just packed in without compression.
You can use any of those ftf's, flashtool will extract both of them with no problems.
This is a question about the region of branding updates.
Can somebody tell me the difference between VMo EU1, - EU2, - EU3 and - EU4?
Thanx
birdxx said:
This is a question about the region of branding updates.
Can somebody tell me the difference between VMo EU1, - EU2, - EU3 and - EU4?
Thanx
Click to expand...
Click to collapse
the main difference is in preinstalled bloatware.
Rootk1t said:
the main difference is in preinstalled bloatware.
Click to expand...
Click to collapse
Thanx,
I flashed EU1 first, than EU4 (because i though that was the right one).
But they're just the same to me.
Same bloatware as far as I can see.
(I'am from the Netherlands-and there was no NL update in flashtool)
After downloading both, i could see small differences inside.
Hi guys,
I am new here, trying to find out what would be the most suitable firmware for my SGP321. Can you please advise how to check it and where from I can download it?
I am from Poland and I want to get rid of any external apps from my fw.
Thanx!
rollesky said:
Hi guys, I am new here, trying to find out what would be the most suitable firmware for my SGP321. Can you please advise how to check it and where from I can download it?
I am from Poland and I want to get rid of any external apps from my fw. Thanx!
Click to expand...
Click to collapse
You can identify your tablet's current firmware's region, branding, customization, and version by reading its \system\build.prop file. You can find the latest released firmware version listed in Apollo89's thread HERE.
Thanks for explanation.
I also noticed that Flashtool contains all firmware versions and supports download if necessary.
Can someone help me with that, i found one but it's from Thailand and i don't know if it will work here, i'm from Costa Rica and my phone build number is KII-L22C636B130. I looking for it because i wanna install CM 13.1 and it says that i need Stock Android M pre-installed on my phone. Thanks
Reittz said:
Can someone help me with that, i found one but it's from Thailand and i don't know if it will work here, i'm from Costa Rica and my phone build number is KII-L22C636B130. I looking for it because i wanna install CM 13.1 and it says that i need Stock Android M pre-installed on my phone. Thanks
Click to expand...
Click to collapse
Well, Match the firm ware versions like this
KII-L22 /// C636 ///
& go to settings, there will be a cust or number starts with Dxxx
match these to any firmware from file depot thread from @clsA
flash the matched firmware via force update method mentioned in file depot thread
hope this helps... quote me or post if you need any further help.
cheers ^_^
mumith3 said:
Well, Match the firm ware versions like this
KII-L22 /// C636 ///
& go to settings, there will be a cust or number starts with Dxxx
match these to any firmware from file depot thread from @clsA
flash the matched firmware via force update method mentioned in file depot thread
hope this helps... quote me or post if you need any further help.
cheers ^_^
Click to expand...
Click to collapse
Where can i find those numbers ? Do you mean like the B130 or another one?, i'm kinda confused and i found a firmware from Thailand but i don't know if it will work here, i saw a lot of people saying that they don't have signal after installing that one, so i don't know if should give it a try.Btw thanks for your help.
Could you post the link for Huawei GR5(KII-L22) 6.0 firmware please?
Since I can't flash anything but the 1302-8390 CDA customization (CH) and since I really need root n xposed, does anyone of you guys have a FTF for that customization with BN 34.0.A.2.301 /292 ? Or is there a way to flash a FTF with a different CDA?
Please help