Hi,
My SGS2 currently running on ParanoidAndroid version 1.1, rooted.Please help,please guide me step by step how can I update / upgrade to higher version if there is any new version available?Please help ... I am new to installing roms ... TQ.
Boot into Recovery and wipe cache partition, dalvik cache and battery stats. Then flash the new version via Recovery. Then re-wipe dalvik cache and fix permissions.
That's it.
Chris.
Sent from my GT-I9100 using XDA
You will find the latest version here:
http://forum.xda-developers.com/showthread.php?t=1580070
Do I need to FIX PERMISSION ?
themadba said:
Boot into Recovery and wipe cache partition, dalvik cache and battery stats. Then flash the new version via Recovery. Then re-wipe dalvik cache and fix permissions.
That's it.
Chris.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Hi Chris,
Do I need to FIX PERMISSION ???
Reading not a strong point, eh ? You even quoted the answer to your question in quoting his post
themadba said:
...fix permissions.
Click to expand...
Click to collapse
Yes fix permissions I said it in my reply to you
Sent from my GT-I9100 using XDA
The latest version is 1.4a. Always fix permissions just to make sure you run into no problems.
Also make sure you re-install the gapps-hydrid.zip again aswell or you wont get access to play store.
Also re-install the gapps through cwm aswell.
Hope this helps
Sent from my GT-I9300 using xda premium
cypherlwind said:
Hi Chris,
Do I need to FIX PERMISSION ???
Click to expand...
Click to collapse
Hi Chris,
Where can I actually get latest build of paranoidandroid rom? I just check my phone and there is another new 1.5 version. Please advise. Thank you.
cypherlwind said:
Hi Chris,
Where can I actually get latest build of paranoidandroid rom? I just check my phone and there is another new 1.5 version. Please advise. Thank you.
Click to expand...
Click to collapse
Dude. You really need to work on that reading thing. Look at post 3.
Related
Hi there I am having some problems with flashing the latest Liquid Smooth Rom 3.0 on my HTC Thunderbolt. A few months ago I rooted and installed an earlier version of the Liquid Smooth Rom without encounter any problems. Today I tried to update to the newer version, on the mod’s side I downloaded the relevant items listed starting with the IMOSEYON Kernel, renamed the zip “update”, and installed it in ClockworkMod Recovery. Restarted, mounted the ROM installed I got a little Liquid Smooth ascii logo saying it installed but after that my phone just restarts hanging on the HTC load screen. I have been through the “noob starter guide” sticky on this forum and repeated part 3 a few times now as well as tried #4 and #6 in the part 11 trouble shooting but still getting the HTC load screen hang. Does anyone have any suggestions to get the ROM working?
Did you install the sense or asop version of the kernel?
Did you wipe davlik cache before flashing the kernel?
What version of recovery are you using?
Did you wipe data/cache before updating to new Rom?
Answer those and I will attempt to help you out.
If I helped you in any way please use the thank you button.
Grnlantern79 said:
Did you install the sense or asop version of the kernel?
Click to expand...
Click to collapse
The ASOP version.
Grnlantern79 said:
Did you wipe davlik cache before flashing the kernel?
Click to expand...
Click to collapse
Yes.
Grnlantern79 said:
What version of recovery are you using?
Click to expand...
Click to collapse
Version 3.1.0.2.
Grnlantern79 said:
Did you wipe data/cache before updating to new Rom?
Click to expand...
Click to collapse
Yes.
Reflash recovery to version 3.0.2.5 or use newest version
Sent from my ADR6400L using XDA App
Grnlantern79 said:
Did you install the sense or asop version of the kernel?
Did you wipe davlik cache before flashing the kernel?
What version of recovery are you using?
Did you wipe data/cache before updating to new Rom?
Answer those and I will attempt to help you out.
If I helped you in any way please use the thank you button.
Click to expand...
Click to collapse
Grnlantern79 said:
Reflash recovery to version 3.0.2.5 or use newest version
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
That did the trick. Thank you very much for the help sir, I gave you the thanks on your replies.
You are very welcome
Sent from my ADR6400L using XDA App
Hi there!
As i have try to find info about downgrading ROM's with no success. (It's big forum indeed).
I have installed ICS XXLPH. Rooted and CWM-ed with Chainfire kernel.
If i want to install custom GB ROM's with CWM are there some precautions that has to be taken prior to go from ICS to GB?
Thanks a lot!
Brgds,
M.
You can just flash immediately from CWM with no problems, there are no actual precautions. However, you will need to wipe all of your data, cache and dalvik COMPLETELY before flashing because any ICS data will not be compatible with GB (otherwise, you'll just have non-stop crashing and force close issues)
Step 1 - use the search button
BigMrB said:
Step 1 - use the search button
Click to expand...
Click to collapse
I DID!!!! But haven't found what i was looking for ( Thanks!
Reboot into cwm, wipe everything (data, cache, dalvik), flash zip - rom and reboot.
Sent from my GT-I9100 using XDA App
So i guess no big deal to jump from ICS to GB. Thanks guys!
Brgds,
M.
mesnati said:
I DID!!!! But haven't found what i was looking for ( Thanks!
Click to expand...
Click to collapse
http://www.google.com/cse?q=downgra...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
So the answer is not in one of those threads
mesnati said:
So i guess no big deal to jump from ICS to GB. Thanks guys!
Brgds,
M.
Click to expand...
Click to collapse
You may need to change the bootloader .
jje
Use Odin and flash a rom(2.3.6) which have bootlader for example XWKK5.
Here is bootlader:
Hi guys, for some reason i have to post this post here due to this forums rules...
I want to know how do i go from Omega rom 27.1 to 27.2... is there no "automatic" update feature ?
korbui said:
Hi guys, for some reason i have to post this post here due to this forums rules...
I want to know how do i go from Omega rom 27.1 to 27.2... is there no "automatic" update feature ?
Click to expand...
Click to collapse
There is no automatic update, you need to download 27.2 and flash it.
Sent from my GT-I9300 using xda premium
sarbe said:
There is no automatic update, you need to download 27.2 and flash it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ok, Thanks for the answer
Does that apply to all roms? For example Cyanogenmod or Checkrom EvoHD ?
I´ve been thinking about trying them anywayz so this might be a fine excuse to do so
Kinda been trying to way them up against each other but not found enough about them to be able to decide...
korbui said:
Ok, Thanks for the answer
Does that apply to all roms? For example Cyanogenmod or Checkrom EvoHD ?
I´ve been thinking about trying them anywayz so this might be a fine excuse to do so
Kinda been trying to way them up against each other but not found enough about them to be able to decide...
Click to expand...
Click to collapse
you can install it over 27.1 because it's no-wipe rom.
but if the rom says that you need to Full wipe your device,you need to factory reset your phone to be able to flash full wipe rom.just nerdy words,hope this helps.
hi guys.
still noob about android and have some questions about installing a new ROM..
If i am on a 4.1.1 version with Omega now, can i just flash a new ROM when its based on 4.2.1 for an example?
I am a little bit confused, because i think it is like an iphone, where you cant install a higher version..
hope you guys understand me
Thanks...
If you wipe from cmw (recovery) everything (Data, cache, dalvik cache)
than you can flash rom without bricking, but if not, you may end up on a bootlop or brick your device,which is no good. So always if coming from another rom (doesn't matter which version) wipe everything.
Sent from my GT-I9300 using xda premium
josefmawas said:
If you wipe from cmw (recovery) everything (Data, cache, dalvik cache)
than you can flash rom without bricking, but if not, you may end up on a bootlop or brick your device,which is no good. So always if coming from another rom (doesn't matter which version) wipe everything.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I think you misunderstud me..
When i have a version 4.1.1, can I install a new rom with a higher version as 4.2.1??
You know like apple, you can only install/jailbreak the latest version.. is it the same with android?
Sivasli_ said:
I think you misunderstud me..
When i have a version 4.1.1, can I install a new rom with a higher version as 4.2.1??
You know like apple, you can only install/jailbreak the latest version.. is it the same with android?
Click to expand...
Click to collapse
Any current release can be installed .
Basics .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Hey guys,
Im having some questions.
Got a new phone and i am going to sell my S II to my uncle but he want it as it comes in the box.
-I am running Slimbean+Dorimanx and it has some reboot issues.
-Now i understand that i need to flash an original rom (and kernel?).
If you have to flash an original kernel also do you do that first or first the ROM?
-Is it possible to go back to ICS, or is this risky to brick the phone?
-And last will the reboot issues automatically be fixed with original ROM?
I've searched alot of post but can't find answers to these questions.
bachot said:
Hey guys,
Im having some questions.
Got a new phone and i am going to sell my S II to my uncle but he want it as it comes in the box.
-I am running Slimbean+Dorimanx and it has some reboot issues.
-Now i understand that i need to flash an original rom (and kernel?).
If you have to flash an original kernel also do you do that first or first the ROM?
-Is it possible to go back to ICS, or is this risky to brick the phone?
-And last will the reboot issues automatically be fixed with original ROM?
I've searched alot of post but can't find answers to these questions.
Click to expand...
Click to collapse
I do not help people who sell their S II.
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
kidding, get a stock rom from sammy and let the flash begin.
Try not to flash a 4.0.4 tho, that's some nasty kernel.
you could also flash jb leak (don't tell him it's a leak), just tell him that is the latest SO for Samsung Galaxy S II and the newest devices fresh outta the box's got it. If he goes for it you can pump the price up and I'll get my 10%...lol
gastonw said:
I do not help people who sell their S II.
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
kidding, get a stock rom from sammy and let the flash begin.
Try not to flash a 4.0.4 tho, that's some nasty kernel.
you could also flash jb leak (don't tell him it's a leak), just tell him that is the latest SO for Samsung Galaxy S II and the newest devices fresh outta the box's got it. If he goes for it you can pump the price up and I'll get my 10%...lol
Click to expand...
Click to collapse
thanks for the reply, im replacing it with a free S III.
but a 4.0.0 won't hurt? btw isnt that the ROM and don't i need another kernel?
im a bit confused about that part.
bachot said:
thanks for the reply, im replacing it with a free S III.
but a 4.0.0 won't hurt? btw isnt that the ROM and don't i need another kernel?
im a bit confused about that part.
Click to expand...
Click to collapse
Flash 4.0.3. The ROM file includes the kernel.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Flash 4.0.3. The ROM file includes the kernel.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
ok thank you sir!
Spiralzz said:
Flash 4.0.3. The ROM file includes the kernel.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
To be sure 100%
Do i have to factory reset, wipe dalvik? wipe cache? fix permissions and flash with odin? and in what order?
1.wipe cashe
2.wipe dalvik
3.flash odin
4.factory reset
(is CWM gone now? so no need to fix permission)
Cheers mate!
bachot said:
To be sure 100%
Do i have to factory reset, wipe dalvik? wipe cache? fix permissions and flash with odin? and in what order?
1.wipe cashe
2.wipe dalvik
3.flash odin
4.factory reset
(is CWM gone now? so no need to fix permission)
Cheers mate!
Click to expand...
Click to collapse
Flash the ROM first. Your phone will restart, but will be stuck on the galaxy SII logo. Turn off phone. Reboot into recovery (which will be the stock 3e one), and do a factory reset. No need to wipe caches, dalvik or fix permissions.
Edit: You can also boot into recovery from your preset custom ROM, before flashing the stock ROM via odin and perform a factory reset. It doesn't matter when you do it.
Also, please remember to keep re-partiton unticked and DO NOT use the .pit file if it is there.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Flash the ROM first. Your phone will restart, but will be stuck on the galaxy SII logo. Turn off phone. Reboot into recovery (which will be the stock 3e one), and do a factory reset. No need to wipe caches, dalvik or fix permissions.
Edit: You can also boot into recovery from your preset custom ROM, before flashing the stock ROM via odin and perform a factory reset. It doesn't matter when you do it.
Also, please remember to keep re-partiton unticked and DO NOT use the .pit file if it is there.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks so much mate, you are awsome!