Hi there I am having some problems with flashing the latest Liquid Smooth Rom 3.0 on my HTC Thunderbolt. A few months ago I rooted and installed an earlier version of the Liquid Smooth Rom without encounter any problems. Today I tried to update to the newer version, on the mod’s side I downloaded the relevant items listed starting with the IMOSEYON Kernel, renamed the zip “update”, and installed it in ClockworkMod Recovery. Restarted, mounted the ROM installed I got a little Liquid Smooth ascii logo saying it installed but after that my phone just restarts hanging on the HTC load screen. I have been through the “noob starter guide” sticky on this forum and repeated part 3 a few times now as well as tried #4 and #6 in the part 11 trouble shooting but still getting the HTC load screen hang. Does anyone have any suggestions to get the ROM working?
Did you install the sense or asop version of the kernel?
Did you wipe davlik cache before flashing the kernel?
What version of recovery are you using?
Did you wipe data/cache before updating to new Rom?
Answer those and I will attempt to help you out.
If I helped you in any way please use the thank you button.
Grnlantern79 said:
Did you install the sense or asop version of the kernel?
Click to expand...
Click to collapse
The ASOP version.
Grnlantern79 said:
Did you wipe davlik cache before flashing the kernel?
Click to expand...
Click to collapse
Yes.
Grnlantern79 said:
What version of recovery are you using?
Click to expand...
Click to collapse
Version 3.1.0.2.
Grnlantern79 said:
Did you wipe data/cache before updating to new Rom?
Click to expand...
Click to collapse
Yes.
Reflash recovery to version 3.0.2.5 or use newest version
Sent from my ADR6400L using XDA App
Grnlantern79 said:
Did you install the sense or asop version of the kernel?
Did you wipe davlik cache before flashing the kernel?
What version of recovery are you using?
Did you wipe data/cache before updating to new Rom?
Answer those and I will attempt to help you out.
If I helped you in any way please use the thank you button.
Click to expand...
Click to collapse
Grnlantern79 said:
Reflash recovery to version 3.0.2.5 or use newest version
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
That did the trick. Thank you very much for the help sir, I gave you the thanks on your replies.
You are very welcome
Sent from my ADR6400L using XDA App
Related
Hi,
My SGS2 currently running on ParanoidAndroid version 1.1, rooted.Please help,please guide me step by step how can I update / upgrade to higher version if there is any new version available?Please help ... I am new to installing roms ... TQ.
Boot into Recovery and wipe cache partition, dalvik cache and battery stats. Then flash the new version via Recovery. Then re-wipe dalvik cache and fix permissions.
That's it.
Chris.
Sent from my GT-I9100 using XDA
You will find the latest version here:
http://forum.xda-developers.com/showthread.php?t=1580070
Do I need to FIX PERMISSION ?
themadba said:
Boot into Recovery and wipe cache partition, dalvik cache and battery stats. Then flash the new version via Recovery. Then re-wipe dalvik cache and fix permissions.
That's it.
Chris.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Hi Chris,
Do I need to FIX PERMISSION ???
Reading not a strong point, eh ? You even quoted the answer to your question in quoting his post
themadba said:
...fix permissions.
Click to expand...
Click to collapse
Yes fix permissions I said it in my reply to you
Sent from my GT-I9100 using XDA
The latest version is 1.4a. Always fix permissions just to make sure you run into no problems.
Also make sure you re-install the gapps-hydrid.zip again aswell or you wont get access to play store.
Also re-install the gapps through cwm aswell.
Hope this helps
Sent from my GT-I9300 using xda premium
cypherlwind said:
Hi Chris,
Do I need to FIX PERMISSION ???
Click to expand...
Click to collapse
Hi Chris,
Where can I actually get latest build of paranoidandroid rom? I just check my phone and there is another new 1.5 version. Please advise. Thank you.
cypherlwind said:
Hi Chris,
Where can I actually get latest build of paranoidandroid rom? I just check my phone and there is another new 1.5 version. Please advise. Thank you.
Click to expand...
Click to collapse
Dude. You really need to work on that reading thing. Look at post 3.
Dear reader,
I've currently been using Cyanomod for 2.3.7 Gingerbread.
My phone is rooted and everything (which took a little while )
Everything is running perfectly fine, but i would like to update my phone to android 4.0+ (whatever the lastest compatible version might be)
How should i go about this?
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
TJ007 said:
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do i need to re-root my phone when i install a new Rom? Or should i just install it through recovery?
Rom's are pre rooted (expect stock, stock BASED roms ARE pre-rooted), once you've installed the rom through cwm, it will be rooted and ready.
cashtecz said:
Dear reader,
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
mikii100297 said:
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
Click to expand...
Click to collapse
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
nh1402 said:
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
Click to expand...
Click to collapse
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
sarangkunte05 said:
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
cashtecz said:
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
Click to expand...
Click to collapse
The fastest way to flash a kernel is to use the program called flashtool, click on the lightening bolt, select Fastboot mode, then select kernel to flash find the kernel you want to flash and it should be done within literally 2 seconds. once Flashtool gives you the all clear, disconnect your phone from usb, restart phone, and there you go, the old kernel will be overwritten, and so will that kernel's cwm version, with the one from the new kernel.
Try FXP138
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
i would also suggest you to try FXP138 which is CM9.1 Android 4.0.4, Its pretty smooth and the brightness bug seems to be resolved:laugh: in FXP138 here's the link http://forum.xda-developers.com/showthread.php?t=1409053
Also here is a link for ROM comparison - http://forum.xda-developers.com/showthread.php?t=1843741
Hope this helps!
FXP138-cm-9-20120916-UNOFFICIAL-urushi
cashtecz said:
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
Click to expand...
Click to collapse
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
ramakrishnanjk said:
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
Click to expand...
Click to collapse
Nevermind, i figured it out!
cashtecz said:
Nevermind, i figured it out!
Click to expand...
Click to collapse
Hey,
Everything is installed and running, however i am wondering about just one thing.
Whenever i reboot my phone i get, right after imputting my sim code, a Unlock Network SIM message.
What is this and how can i solve it?
Regards,
(oops just realized i made a double post, apologies!)
elow im new/newbie here on XDA i need your expertise and suggestion !
can anyone tell me how to install Cynogenmod10 and what is Gapps?
what Stock Kernel is good ?
what ROM is better?
and the LATEST Stock/ROM as of October 9,2012
please reply and help me
im filipino by the way
snipper07 said:
elow im new/newbie here on XDA i need your expertise and suggestion !
can anyone tell me how to install Cynogenmod10 and what is Gapps?
what Stock Kernel is good ?
what ROM is better?
and the LATEST Stock/ROM as of October 9,2012
please reply and help me
im filipino by the way
Click to expand...
Click to collapse
To install cm10 you need root access, go check cfroot by chain fire. Gapps is basically your Google now etc. With a custom recovery, just flash the cm10 and Gapps and you'll be good to go.
Stock kernel is subjective with very little difference. All kernels work for me so it's not so much of an issue deciding which is better.
The best rom is the one you try for yourself. Rom comparisons are not allowed on xda
Latest stock will be depending on whether you want android version 4. 1.1 or 4.0.4
Wrong section btw, should be posted in the q&a
Sent from my GT-I9300 using Tapatalk 2
Yow
Conflict94 said:
To install cm10 you need root access, go check cfroot by chain fire. Gapps is basically your Google now etc. With a custom recovery, just flash the cm10 and Gapps and you'll be good to go.
Stock kernel is subjective with very little difference. All kernels work for me so it's not so much of an issue deciding which is better.
The best rom is the one you try for yourself. Rom comparisons are not allowed on xda
Latest stock will be depending on whether you want android version 4. 1.1 or 4.0.4
Wrong section btw, should be posted in the q&a
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
---------------------------
Yow bud thank you anyway might you experienced this problem its say i need Higher CWM CF 1.1 or newer to that version? you know how to fix this??
snipper07 said:
---------------------------
Yow bud thank you anyway might you experienced this problem its say i need Higher CWM CF 1.1 or newer to that version? you know how to fix this??
Click to expand...
Click to collapse
Hey no problem! Yup, are you using jellybean? Have this issue too as Cwm is not optimised fully.
Just have to boot into recovery and everything would be working from there with no issues!!
Sent from my GT-I9300 using Tapatalk 2
wazzup
Yeah Bud im using this one --->I9300_Omega_v27.2_XXDLIB_Jelly_Bean
but i experience that problem and when i go to my CWM it says i need Newer Version
snipper07 said:
Yeah Bud im using this one --->I9300_Omega_v27.2_XXDLIB_Jelly_Bean
but i experience that problem and when i go to my CWM it says i need Newer Version
Click to expand...
Click to collapse
You can safely ignore that error.
CWM in the apps drawer is the UI interface of the CWM recovery (accessed by pressing the Vol Up+Home+Power when booting up). CWM recovery works without a hitch.
hmmmmmm
Oomahey said:
You can safely ignore that error.
CWM in the apps drawer is the UI interface of the CWM recovery (accessed by pressing the Vol Up+Home+Power when booting up). CWM recovery works without a hitch.
Click to expand...
Click to collapse
But dude it say's some Option is disabled on CWM dude
snipper07 said:
But dude it say's some Option is disabled on CWM dude
Click to expand...
Click to collapse
All options are there when you boot into recovery, it is just the app that is incompatible, meaning a couple of the options won't work directly from the app....you need to boot into recovery to do those things.....don't worry, it's all there.
I personally prefer the older recovery as it doesn't use the blob method of backing up. And I'm used to the old way!
One noob question has been bugging me for quite a long time!
The thing is, do i have to re-flash the whole ROM if i want to change the kernel or can i just flash the kernel over the previous without re-flashing the whole ROM?
AmG77 said:
One noob question has been bugging me for quite a long time!
The thing is, do i have to re-flash the whole ROM if i want to change the kernel or can i just flash the kernel over the previous without re-flashing the whole ROM?
Click to expand...
Click to collapse
If the rom and kernel are compatible you should be able to just flash the new kernel. Wipe cache & dalvik..
CtrlAltDelIrl said:
If the rom and kernel are compatible you should be able to just flash the new kernel. Wipe cache & dalvik..
Click to expand...
Click to collapse
Thank you for prompt reply!!
Will do as you suggest!!
Sent from my LT22i using xda app-developers app
IF you are in 4.2.2, make sure that the kernel which you have selected is for 4.2.2. Kernels made for older versions might not work with 4.2.2.
I kinda noob on flashing ROMs, and I flashed this ROM http://forum.xda-developers.com/showthread.php?p=44163425#post44163425 on my player. I did all the steps, tried two diferents nightlys and the player is stuck on a "Galaxy S cyanogen(mod)" logo.
I dont know what to do
Any advices?
Did you wipe data? If not, boot into cwm and do the wipe data option.
Sent from my GALAXY Player 4.2 using xda app-developers app
drakonizer said:
Did you wipe data? If not, boot into cwm and do the wipe data option.
Sent from my GALAXY Player 4.2 using xda app-developers app
Click to expand...
Click to collapse
I did.
And I waited for a hour and still on that screen =|
lppaiva64 said:
I did.
And I waited for a hour and still on that screen =|
Click to expand...
Click to collapse
Try flashing another ROM, then try flashing PAC-ROM. The same thing happened to me, as well.
TheKryptonite said:
Try flashing another ROM, then try flashing PAC-ROM. The same thing happened to me, as well.
Click to expand...
Click to collapse
Which ROM did you used before flashing PAC-ROM?
lppaiva64 said:
Which ROM did you used before flashing PAC-ROM?
Click to expand...
Click to collapse
I don't remember, but it can be any ROM. Also, I don't remember if it was PAC-ROM specifically.
TheKryptonite said:
I don't remember, but it can be any ROM. Also, I don't remember if it was PAC-ROM specifically.
Click to expand...
Click to collapse
Ok, i'll try then