Rooted and want to upgrade? - AT&T Samsung Galaxy S II SGH-I777

Perhaps someone can help me here.
I have an ATT galaxy s2 (i777 I think). A while back for some reason it started shutting off randomly. After that I rooted it and then a few days later it just going into a boot-loop and wouldnt start up at all.
So I read on this site that I needed to flash kernel for it. To be honest I wasn't sure what that was but I downloaded one that was like "one kernel to rule them all". So now it says SGH-I999 when I start it up and seems to work mostly normally except for a new model number and yellow triangle.
I want to update it to the new ICS that is just released, do I need to unroot or flash a different kernel to it before I try to update it???

In short. No. . Everything is OK. Just download the official update from the development section, do a full wipe, and install. Make sure to have a backup first tho.

thanks, that worked!

Related

[Q] Galaxy S2 Stuck At Boot Screen

Hello, sorry if this has already been answered but I did look around at similar scenarios and it seems to me that using odin to flash the stock kernel should fix it but on my device, however, it doesn't fix my problem. I beleive what I did was select update firmware from .zip in clockwork on accident. Idk if this is what you consider a "boot loop" because it doesnt restart it just sits there at the black galaxy s2 screen. Any insight would be great. I hate to have to buy a new one as it is quite alot of money. Like I said, sorry if this is already answered but after looking around for hours I still hve had no luck. Thanks in advance, Alex
Can you get into recovery (volume up+home+power) or download mode (volume down+home+power)?
I can get in to download and recovery mode both
The outlook is promising then. Without knowing what you've flashed, it's impossible to say what damage you've done, but if you don't mind losing your data, you can certainly get back to a working state by following [READ THIS] Got a Boot Loop? Don't post a New Thread!.
Before going down that route though, if you do want to keep your data, let us know what you flashed as it might be recoverable (maybe you just flashed the wrong kernel).
I can't say for sure what i flashed but I can say that i either flashed with an update or updated with a kernel??? sound right??? idk. the data isnt near as important to me as the 680 dollars my carrier will charge me for a new s2. Right now im using a junk alcatel tribe and im going through galaxy withdrawls.
Well before flashing anything else, make sure you definitely have an I9100, not some other variant (I notice you mentioned dollars). If you have a different model, you're in the wrong forums and might make things worse by following advice for the I9100.
I was pretty sure that it is the I9100 but i took the battery out and double checked. it IS the I9100
also for what it's worth when going into recovery(stock version) right after the text reading updating application it gives me an error in red. (E:install_application_for_customer:Can't unmount /preload copy application failed) and after the (Appling [yes it really spells it appling] Multi-CSC) it says Can't access to '/system/csc/TTT/system/'. However, the line after it says that it says Successfully applied multi-CSC
My first attempt to get back to a working phone without losing data would be to flash a stock kernel then, have you tried that?
Ok.. done.. but it still sits at the galaxy screen except now it has the triange due to the custom firmware
If that hasn't got you up and running then it's probably time to bite the bullet and follow the instructions from the boot loop thread linked above (which will also remove the triangle).
Maybe you can answer another question for me. When in recovery mode it says apply update from sdcard... why does it say that when it doesnt actually read from the sdcard? i have checked with the sdcard both in and out and the file directory in the recovery mode doesnt change. is it calling the usb storage an sd card?
ok when flashing a stock rom do i use the phone option in odin or the pda still
If you're flashing a stock rom from [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download, then just follow the instructions from there (but usually PDA).
:'( Still wont boot.
What does happen, did any steps fail, any error messages?
Everything went smooth with no errors. No steps failed. Sitting at the boot screen is all it does though
Did you definitely wipe user data? (step 3). The final step of that thread is to try flashing a ROM which wipes, such as (non-stock) VillainROM 1.1.
well... yes i definitely wiped the user data and it was successfull when doing so. I didnt try the villian rom just because I thought that it was an optional thing but i will def. try it now that you bring it up. and hey, i really appreciate the help no matter what the outcome
(VillainROM 1.1 - XWKE7 base) I'm a UHKG7..... is this going to be a problem? just something i noticed and thought I would ask before going ahead

Unable to Update Galaxy S2 i777 Via Kies: Recieving odd Notices

Hey everyone, I was attempting to flash an iteration of cyanogen mod on my i777 last night and something went horribly wrong (I think the tutorial I used linked me to Clockwork Recovery Mod for the i9100 or something) so long story short, I flashed a stock i777 rom and reset to factory defaults. My phone is now functional but I'm trying to upgrade to the latest firmware before I try to flash another ROM. I'm running into some problems using Kies though. When I have Kies open and my phone is plugged in, it realizes that I need to upgrade firmware and ask me if I want to. A dialog box opens stating my current firmware version (PDA:KH7 / PHONE:KH7 / CSC:KH7), the latest firmware version (PDA:KK6 / PHONE:KK6 / CSC:KK6), the test "TEST1" then the update/cancel buttons. Then it prompts me to read some disclaimer information (don't disconnect your phone, back everything up, etc) and I click "Start upgrade". Immediately after this a dialog box opens that says "Notice" at the top then in the information field there is just the message "TEST2". At the bottom are the options "start" and "cancel" if I click start, the process continues to download upgrade components, then prepare upgrade components, then the upgrade process begins and I get a notification that just says "Notice" Then a bunch of (what looks like) mandarin characters (I'd post a picture but because I'm a new user I cannot reference external links.) Once I click 'OK' it acts as if the phone has been disconnected and reconnected and starts the process again.
Obviously these messages are very odd and uninformative for an end user like myself. I'm led to believe I'm doing something wrong but can't find any help online (I've tried google and searching through threads here here). Has anyone experience this before? is there an ICS rom that I can flash straight from the stock rom? What can I do to fix this?
Thanks in advance!
Wild guess. U used rom manager.
Sent from my SGH-I777 using Tapatalk 2
Not sure about the messages, but when I first decided to try the KIES update when I had restored to stock, I did the KK6 update over the air. Go to settings, then software update (I can't quite remember where software update is in gingerbread settings).
I don't know if this will help, but plugging your phone into KIES with KK6 already on thephone may work.
And, yes as mentioned above, if you used ROM manager in the past, you will have problems.
You mentioned you are back to stock with a functional phone. You also said you plan to flash a custom rom. So why bother upgrading via Kies first? Whatever upgrade you receive via kies will disappear when you flash a new ROM. If you have a functional phone, Just go ahead and flash whatever you are going to flash.
However, it sounds as if your problems started because, in the BEST case you flashed the wrong rom for your phone and, in the WORST case, you might have used ROM manager which a few minutes of browsing the stickies would have immediately told you was a bad idea. So, before you attempt anything else with your phone, it sounds as if you need to do some reading to make sure you understand what you are doing. The stickies are a great place to start.
jack man said:
Not sure about the messages, but when I first decided to try the KIES update when I had restored to stock, I did the KK6 update over the air. Go to settings, then software update (I can't quite remember where software update is in gingerbread settings).
I don't know if this will help, but plugging your phone into KIES with KK6 already on thephone may work.
And, yes as mentioned above, if you used ROM manager in the past, you will have problems.
Click to expand...
Click to collapse
I tried updating over the air yesterday after I did the factory reset but it told me I was IP to date (obviously not true) and is making me wait 24 hours before I try again. I still have about 6 hours before I can try again. I'll post again with my results. I did not use ROM manager. I flashed the from via Odin mode. Thanks for the replies, guys.
I'm confused about what u did and how u fixed it. And if its fixed. But whatever the case let us know how it turns out.
Sent from my SGH-I777

[Q] Note Rom Pre-Brick help

If anyone has the time i would like some help on how to flash my Note without bricking the phone. Reason i ask, is because i have already bricked it!! Sent it off to mobiletechvideos.com who unbricked it so now i'm back! I love the phone alot just hate stock rom and how slow it is. I would like to use a rom that is able to overclock? I've read about the sauron rom but i can't tell if it's out dated or if there is something better now?
I'm not a noob when it comes to rom's, Htc aria, samsung captivate, inspire, then the htc one x - i've all rom'd them but now i'm stump'd. The first go around, i flashed the rom and everything went thru fine. When i booted up the phone - Nothing changed!? so i find another rom, flashed it and the phone bricked. Tried jig everything else and to no avail. So 65$ later i'm back with the stock rom and it's rooted. Anyhow, here is the info i'm sure you guys are wanting to give me a hand!
Model Number
SAMSUNG-SGH-I717
Andriod Version
2.3.6
Baseband Version
I717UCLF6
Kernel Version
2.6.35.11
Build Number
GINGERBREAD.UCLA1
Cliff Notes -- Hard bricked trying to flash rom, Main goal want to overclock, battery life not issue. Please help flashing :angel:
do you have a custom recovery ? like cwm or the other one ( ive only had my note a week)
i would start with that..
If I were you (and I fully understand that I am not nor anyone else on here...) I would:
1. Install Samsung Kies and drivers to my laptop.
2. Start Samsung Kies and plug in the phone via USB cable.
3. Update the phone's OS via Kies to ICS. You won't brick it that way.
4. Give stock ICS a chance and if you still feel it's too slow for you (rolling eyes), flash a custom ROM/kernel.
nutpants said:
do you have a custom recovery ? like cwm or the other one ( ive only had my note a week)
i would start with that..
Click to expand...
Click to collapse
Yep, already have clockwork mod, That's no big deal.
BlackZenith said:
If I were you (and I fully understand that I am not nor anyone else on here...) I would:
1. Install Samsung Kies and drivers to my laptop.
2. Start Samsung Kies and plug in the phone via USB cable.
3. Update the phone's OS via Kies to ICS. You won't brick it that way.
4. Give stock ICS a chance and if you still feel it's too slow for you (rolling eyes), flash a custom ROM/kernel.
Click to expand...
Click to collapse
Sounds good sir i will give it a try - Meanwhile Anyone want to take a stab at walking me thru a rom that would work on my phone?
not that i have any idea what i am doing...
0 MAKE VERY SURE THE ROM YOU ARE FLASHING IS FOR YOUR PHONE... FORGET THE WORDS "note" or "galaxy" or anything else..
its the i717d or i 7100 or i 7000 that matters.. if in doubt dont do it..
1 download your cwm compatible rom (like blackstar or others) ( try to pick a recent rom no older than 2 months unless all the developers have jumped ship for the new phone)
( usually ends with a .zip) to your sd card)
2 use "android file verifier " ( from the market) to make sure your md5 hash of the download is prefect
( there SHOULD be a md5 someplace to verify the file download)
then by following info like whats found here.... http://forum.xda-developers.com/showthread.php?t=1584250 ( and that i copied and pasted)
boot into recovery by pressing volume up down,and power button at same time ( when your phone is turned off)
Select wipe data/factory reset and confirm
Select wipe cache partition and confirm
Select advanced - wipe dalvik cache and confirm
Select install zip from SD card
Select from internal SD card or wherever you placed it.
Select the ROM file and confirm.
rom will install
then AGAIN
Select wipe data/factory reset and confirm
Select wipe cache partition and confirm
Select advanced - wipe dalvik cache and confirm
boot up wait 5mins for it to boot.. dont touch it for 10 minutes after it boots
then
have fun..
dont forget to wonder if you bricked it during the first boot... that one takes the longest..
i have followed these directions drunk and sober when flashing over 20 times my new note i717d i got last week and im not bricked yet.
its the same system i used with my sgs2 i9100 for over a year and it still works..
but then dont think anything i have said here is right.
i could just be stupid and very lucky that i dont brick everything i touch but will not admit it.
READ A LOT, then READ more.. then ONE MORE TIME READ.. then flash.
BlackZenith said:
If I were you (and I fully understand that I am not nor anyone else on here...) I would:
1. Install Samsung Kies and drivers to my laptop.
2. Start Samsung Kies and plug in the phone via USB cable.
3. Update the phone's OS via Kies to ICS. You won't brick it that way.
4. Give stock ICS a chance and if you still feel it's too slow for you (rolling eyes), flash a custom ROM/kernel.
Click to expand...
Click to collapse
So after about 2 hours off and on, using different cables and google. No avail, UGH!
Samsung kies
Your device is not supported to update via samsung kies. Walked thru a few xda threads and they are saying update thru odin. Hell if i'm jumping ship to odin again, mine as well do a rom. I'm giving this 1 more shot, if it bricks i'll sell it lol!!
Mobiletechvideos most have had to do something extreme to repair your device, or they gave you one that.... never mind. Well, looks like you need to flash CWM and find a zip aligned ROM on here.
BlackZenith said:
Mobiletechvideos most have had to do something extreme to repair your device, or they gave you one that.... never mind. Well, looks like you need to flash CWM and find a zip aligned ROM on here.
Click to expand...
Click to collapse
LOL, no they did exactly what was promised. Even people who haven't bricked their device have ran into this issue!
Okay - After reading up and then watching a video on how to flash roms. Which looked exactly like what i had done before time and time again. I'm proud to say i'm ROM'D! I'm now running the blackstar rom and it's very zippy love it to death. Would like to have tried ICS 4.0.4 but took the plunge and happy with the turn out.
I've always came to this site for help but never made an account and you guys are too nice! Hopefully i can/could help someone else out down the road. Until then i'm going to enjoy not being so slow! Thanks!:good:
Its because you have a LF6 modem. Its not the modem that GB had. The Kies upgrade only works if your phone is stock.
You can use the kies emergancy firmware upgrade option.
Is not black star 4.04?
nutpants said:
Is not black star 4.04?
Click to expand...
Click to collapse
1st post says GB.
rangercaptain said:
1st post says GB.
Click to expand...
Click to collapse
First post here or first post of black star ?
written in your mud with my stick
Your first post.
The latest black star is based on the ics 4.0.4 firmware from Singapore
studacris said:
Your first post.
The latest black star is based on the ics 4.0.4 firmware from Singapore
Click to expand...
Click to collapse
The original Tom I started with was 2.3.6 since lies wouldn't let me update to ice 4.0.4 I jumped the gun and flashed blackstar. While it is a great rom. I'm thinking of trying more while I got my feet wet.
1Note said:
The original Tom I started with was 2.3.6 since lies wouldn't let me update to ice 4.0.4 I jumped the gun and flashed blackstar. While it is a great rom. I'm thinking of trying more while I got my feet wet.
Click to expand...
Click to collapse
I've been flashing two roms a day looking for something that supports total recall and underclocking, with a network mode menu that has lte on it.
I think I am out of luck.and I have forgotten some roms so I may flash everything again and keep notes...
It's research not an addiction.
written in your mud with my stick
Stage 1 of acceptance is denial
studacris said:
Stage 1 of acceptance is denial
Click to expand...
Click to collapse
LOL ...
And of course my favorite ....
"Trying is the first step toward failure ".....(Homer Simpson )...(grin )

[Q] tried to root i777, now stuck at galaxy s2 with triangle and i900 screen

Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.

Please help me get jelly bean on my S2

Hello guys please hear me out!
I'm new to android as well as this forum, but I hear it's a great community. I followed a lot of tuts on how to upgrade my S2 to jelly bean or ics none of them really worked.
OK my friend got me the phone from amazon it's a Samsung Galaxy S2 International Version 16gb Unlocked with 2.3.5 Gingerbread stock firmware. The following day I tried to upgrade the unrooted firmware via KIES, it told me there is no update available for my phone. Okay I decided to root it and flash it though odin. I read that it was wise to back-up the software first and boy was it! So I rooted it and backed it up with ClockworkMod to an sd card just in case. But I forgot to get the other information before I flashed: original Baseband version, Kernel and Build number.
The flashing went fine I got 4.1.2 on my phone but I lost the network service, the lock screen and the turn off key dialog (the phone would just turn off as soon as i hit the off button). Rooted it, installed a different 4.1.2 firmware, same thing. Then I tried ICS, it was worse - I had similar issues as well as the home key was not working when multitasking. So I went back to original backed up rom. Everything works fine now but the baseband version remains from the last "update". Everytime I try a new firmware and go back to the original rom the last baseband sticks.
My question is: Is it at all possible to upgrade my phone? My kernel (from backedup rom) is I9100XXKI3 and build number gingerbread.XXKI3 Imei is fine.
Also my binary data counter is up to 7, is that bad?
Any help I will greatly appreciated! I badly want to upgrade, it's the whole reason I got S2 because it was supposed to be "upgradeable"
Thank youuuu.
iceman8443 said:
I followed a lot of tuts on how to upgrade my S2 to jelly bean or ics none of them really worked.
Click to expand...
Click to collapse
Read every word of a thread at least once before even attempting anything then make sure you have all the files you need ready to be used in their relevant places too and try again. When People claim to have read lots of tutorials and guides that have worked for the majority of People but can't get something to work then it's usually down to user error, i.e skimming through guides and missing a vital step that throws the whole thing off.
http://forum.xda-developers.com/showthread.php?t=1826497
iceman8443 said:
Hello guys please hear me out!
I'm new to android as well as this forum, but I hear it's a great community. I followed a lot of tuts on how to upgrade my S2 to jelly bean or ics none of them really worked.
OK my friend got me the phone from amazon it's a Samsung Galaxy S2 International Version 16gb Unlocked with 2.3.5 Gingerbread stock firmware. The following day I tried to upgrade the unrooted firmware via KIES, it told me there is no update available for my phone. Okay I decided to root it and flash it though odin. I read that it was wise to back-up the software first and boy was it! So I rooted it and backed it up with ClockworkMod to an sd card just in case. But I forgot to get the other information before I flashed: original Baseband version, Kernel and Build number.
The flashing went fine I got 4.1.2 on my phone but I lost the network service, the lock screen and the turn off key dialog (the phone would just turn off as soon as i hit the off button). Rooted it, installed a different 4.1.2 firmware, same thing. Then I tried ICS, it was worse - I had similar issues as well as the home key was not working when multitasking. So I went back to original backed up rom. Everything works fine now but the baseband version remains from the last "update". Everytime I try a new firmware and go back to the original rom the last baseband sticks.
My question is: Is it at all possible to upgrade my phone? My kernel (from backedup rom) is I9100XXKI3 and build number gingerbread.XXKI3 Imei is fine.
Also my binary data counter is up to 7, is that bad?
Any help I will greatly appreciated! I badly want to upgrade, it's the whole reason I got S2 because it was supposed to be "upgradeable"
Thank youuuu.
Click to expand...
Click to collapse
Go to sammobile.com
Click on firmware
Type in the searchbar: gt-i9100
Search for your country or the one thats the closest to ya
Download the file
Once downloaded set your s2 in download mode by pressing volume down, home en power buttons
Plug in your s2 into your comp
Open Odin
Press the PDA button
Choose the ....home....tar.md5 you downloaded
Make shure that re-partion, f reset time and auto reboot are checked
And hit the start button
If your phone rebooted check and you must be running on 4.1.2...
After that root it... And do what you wanna do
The binary counter doesn't meane something worse... Its only a counter thats counting how manny custom roms you have flashed...
You can reset it with a usb jig or triangle away app in the playstore... ( the app doesn't work always...)
XperienceD said:
Read every word of a thread at least once before even attempting anything then make sure you have all the files you need ready to be used in their relevant places too and try again. When People claim to have read lots of tutorials and guides that have worked for the majority of People but can't get something to work then it's usually down to user error, i.e skimming through guides and missing a vital step that throws the whole thing off.
http://forum.xda-developers.com/showthread.php?t=1826497
Click to expand...
Click to collapse
Thank you guys for the replies however do you know anything about my weird issues, like the lockscreen not working after update, then no network service and the power off dialogue missing completely. I've tried at least 3-4 different jelly bean firmwares and always i got the same issues.
I live in Kosovo and i downloaded the Greek firmware which I'm going to try next. I'm going to go through pelpa87's thread you suggested and hopefully it will work and I will report back.
Thanks again.
Edit: thanks for the help guys, last night I installed jelly bean and it works great without any issues.

Categories

Resources