I tried to port cm9 samsung galaxy s rom to u8860. Apperently it didnt turn out so well. I had a dload folder in my sdcard. and when i turn on the phone w/sd card it comes a green blue read screen(regular boot , recovery and download) and it beginst to upgrade from the dload i think. but it dosent make it all the way. it stops at ca. 30% every time. and bliking red led lapidly. DONT KONW HOW TO FIX IT!!!!
Pleas help
dv1234 said:
I tried to port cm9 samsung galaxy s rom to u8860. Apperently it didnt turn out so well. I had a dload folder in my sdcard. and when i turn on the phone w/sd card it comes a green blue read screen(regular boot , recovery and download) and it beginst to upgrade from the dload i think. but it dosent make it all the way. it stops at ca. 30% every time. and bliking red led lapidly. DONT KONW HOW TO FIX IT!!!!
Pleas help
Click to expand...
Click to collapse
Same problem here! Flashing back to B870 ROM is not possible! Always stops and starts blinking red LED forever!
Which ROM did you use?
Enviado desde mi u8860 usando Tapatalk 2
dv1234 said:
I tried to port cm9 samsung galaxy s rom to u8860. Apperently it didnt turn out so well. I had a dload folder in my sdcard. and when i turn on the phone w/sd card it comes a green blue read screen(regular boot , recovery and download) and it beginst to upgrade from the dload i think. but it dosent make it all the way. it stops at ca. 30% every time. and bliking red led lapidly. DONT KONW HOW TO FIX IT!!!!
Pleas help
Click to expand...
Click to collapse
Have you resolved this? I have the same problem, only on U8950-1. Can anyone help us?
tiringer said:
Have you resolved this? I have the same problem, only on U8950-1. Can anyone help us?
Click to expand...
Click to collapse
May u can go into recovery and wife data / cache / dalvik cache first .. and the go for upgrade via dload method
Could you solve your problem ? I am stucked in similar type of screen in Huawei G520-0000, and no help .
need help
my huawei g520-0000 face the same error of red ,green and blue screen. i can't use no recovery ,no fastboot and flashing new firmware is stop in middle of progress.
I Have this problem too with my g525. plzzzzzzzzz someone help me. anyone can resolve that??
I also have same problem
My huawei c8815 showing three colours boxes red green blue. In download mode goes to 30 % and stops. In pink screen mode 2 drives loaded
1. Android adapter modem 2. DBadapter reserved interface
please help me
please help me
i cann't repair blue screen in huawei g520-0000
tiringer said:
Have you resolved this? I have the same problem, only on U8950-1. Can anyone help us?
Click to expand...
Click to collapse
Any info how to resolve this problem anyone??
g630 same problem..
edit:
managed to get into QDloader 9008 mode, you need to know where to connect wire and then I guess U need files to flash it with QFIL software.
In my case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hey lads.
Today i tried rooting my tablet using this -> http://forum.xda-developers.com/showthread.php?t=2240029
I did everything from the instructions and first time didn't work. I tried 2nd time and it didn't work. Then I downloaded the RV27RC03_WW_GEN1 system.img, copied it in the "system_image" folder. I started rooting it for the 3rd time (because I was a fu*ktard) and when it finished it was bricked. I tried turning it on, but it wouldnt turn on, then i inserted a needle in the reset hole. It turned on, but it froze on the acer logo. When I got in the system recovery I made a factory reset. Can someone please help me unbrick it. Thanks.
bump
BlackCopper said:
Hey lads.
Today i tried rooting my tablet using this -> http://forum.xda-developers.com/showthread.php?t=2240029
I did everything from the instructions and first time didn't work. I tried 2nd time and it didn't work. Then I downloaded the RV27RC03_WW_GEN1 system.img, copied it in the "system_image" folder. I started rooting it for the 3rd time (because I was a fu*ktard) and when it finished it was bricked. I tried turning it on, but it wouldnt turn on, then i inserted a needle in the reset hole. It turned on, but it froze on the acer logo. When I got in the system recovery I made a factory reset. Can someone please help me unbrick it. Thanks.
Click to expand...
Click to collapse
I have done a similar thing and was wondering if you ever found a way to fix it as am stumped.
Help...when i flash the firmware OS_Acer_AV052.RV27RC03.WW.GEN1_A42J_A.zip using stock recovery of aer iconia a1 810 it completed
but when i reboot it ....its not turning on...and not vibrating...and when i connect tablet to pc......it connect and disconnect......so plzzzz.help me......its very important..
Can Somebody help me?
Got onto a bootloop after flashing CWM for A1-810 from falshify
Now it doesnt work even cant enter the recovery, Just the acer logo the vibration and
this same process again, It was working perflecty with root
Please help me, also my computer recognize it for 1 second until it bootloops again
Error EMMC ?
Hello. I can not speak English ..a little help from me.
Acer Iconia A1 810 can not be formatted. Why 117 Gb + 8192Mb EMMC
How can you fix it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
even i have the same issue but for me m tab was working fine but suddenly it stopped , i tried to restart but it was stuck on logo so i went to do a hard reset , after hard reset it got stuck on erasing for a long time and then turned off. when i restarted it shows the logo and shows erasing and goes to recovery mode i tried everything using its firmwire to install from sdk and using sp flash tool and fastboot mode but still no use .plz someone help me fix this i iam in this issue for about a month nw still not fixing
me too, now I try to find update file to try it from recovery, but I am not successful
Odoslané z SM-N9005 pomocou Tapatalku
hello guy's i have the same issue, anyone can help me
all the best
zsolt0616 said:
Hello. I can not speak English ..a little help from me.
Acer Iconia A1 810 can not be formatted. Why 117 Gb + 8192Mb EMMC
How can you fix it?
Click to expand...
Click to collapse
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
I have the same problem
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Pecan6 said:
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
Click to expand...
Click to collapse
Onilink90 said:
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Click to expand...
Click to collapse
First read this :
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
*CLICK THIS AND IN NEW TAB IN ADDRESS BAR REPLACE "INSERT_YOUR_IMEI_HERE" FOR YOUR ORIGINAL IMEI (BEHIND THE BATTERY) THEN YOU WILL SEE LINK ON THE PAGE CLICK THAT AND YOU WILL DOWNLOAD DIRECT FROM LG SERVERS
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button or VOL+ or VOL+ and VOL-
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
EDIT 5a BROKEN SCREEN SPECIAL
since your screens don't display you will have to test all key combinations
you can recognise download mode by opening device manager on pc and checking if only the 2 marked drivers are installed *(NOTE THAT PORT NUMBER MAY VARY)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
Click to expand...
Click to collapse
2 Report back
Hello, I have a little question, recently a friend told me if I can fix his i9100, cause "it remains at logo"
My surprise was that the phone doesnt even charge, when I plug it to the power, a battery that aparently is loading apears, for 2 segs, and then the screen turn off, and then the battery icon agains, and remains in a infinite loop but wont charge
Someone have this problem and knows how to repair it? I wish the problem isnt hardware :/
This is the exact icon i say:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance Guys!
ManaSV93 said:
Hello, I have a little question, recently a friend told me if I can fix his i9100, cause "it remains at logo"
My surprise was that the phone doesnt even charge, when I plug it to the power, a battery that aparently is loading apears, for 2 segs, and then the screen turn off, and then the battery icon agains, and remains in a infinite loop but wont charge
Someone have this problem and knows how to repair it? I wish the problem isnt hardware :/
This is the exact icon i say:
Thanks in advance Guys!
Click to expand...
Click to collapse
could need a new battery or new usb flex cable (charger port)
even more, perhaps..there is a "bootloop" problem that explained this behaviour...please looks for the post, in Development thread, to fix this issue
ko2005pu said:
even more, perhaps..there is a "bootloop" problem that explained this behaviour...please looks for the post, in Development thread, to fix this issue
Click to expand...
Click to collapse
Thank you very much for your answer, it makes me happy that possibly the problem has a fix, but, please, can you link me the fix, i searched before (maybe i didn't search properly) but I didn't found it, please help me, thanks in advance!
You will have to reflash a stock rom using ODIN. Don't worry because there are many guides over the internet. Guide: http://mobilenetworkcomparison.org.uk/tutorials/how-to-restore-the-stock-samsung-galaxy-s2-rom/
Make sure you download the rom for the correct version of phone!
Once you've flashed stock rom, make sure to factory reset and wipe cache partition. (note: don't do this if you are going to flash ics because this might hard brick your device)
gsstudios said:
You will have to reflash a stock rom using ODIN. Don't worry because there are many guides over the internet. Guide: http://mobilenetworkcomparison.org.uk/tutorials/how-to-restore-the-stock-samsung-galaxy-s2-rom/
Make sure you download the rom for the correct version of phone!
Once you've flashed stock rom, make sure to factory reset and wipe cache partition. (note: don't do this if you are going to flash ics because this might hard brick your device)
Click to expand...
Click to collapse
Hello Thanks! I didn't see when you reply!!
The problem is that, I can't even get into download mode, when i press power button, the screen doesn't turn on, the screen turn on until I plug the charger, but only appears the battery icon i put in the first post :/
ManaSV93 said:
Hello Thanks! I didn't see when you reply!!
The problem is that, I can't even get into download mode, when i press power button, the screen doesn't turn on, the screen turn on until I plug the charger, but only appears the battery icon i put in the first post :/
Click to expand...
Click to collapse
Maybe it is a battery problem... Try a new battery.
Tried with a new battery, and same problem :/
Hi, My HTC bricked and I don't know what to do !
Here are some details :
1. Can't turn on ! Just a black screen with no reaction !
2. Can't access to recovery mode/etc ...
3. When press and hold volume and power button nothing happened !
4. When connect it to PC, LED light start blinking !
5. When connect it to PC, My PC can't recognize Qualcomm HS-USB QDLoader 9008 ... and there is no port like that in device manager ! :crying: This error pops up :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. USB debugging is also another problem ! :crying::crying:
7. Don't know which model my phone is (for firmware download) ... and can't read it through PC (because of above problems) ! :crying:
Try this
malis20 said:
Hi, My HTC bricked and I don't know what to do !
Here are some details :
1. Can't turn on ! Just a black screen with no reaction !
2. Can't access to recovery mode/etc ...
3. When press and hold volume and power button nothing happened !
4. When connect it to PC, LED light start blinking !
5. When connect it to PC, My PC can't recognize Qualcomm HS-USB QDLoader 9008 ... and there is no port like that in device manager ! :crying: This error pops up :
6. USB debugging is also another problem ! :crying::crying:
7. Don't know which model my phone is (for firmware download) ... and can't read it through PC (because of above problems) ! :crying:
Click to expand...
Click to collapse
Hi there,
can you tell me how did it happen,
Thanks
KIBS2173
KIBS2173 said:
Hi there,
can you tell me how did it happen,
Thanks
KIBS2173
Click to expand...
Click to collapse
Hi,
First of all, I changed LCD. After that I install custom rom and about 6 months later my phone hard bricked !
Try this
malis20 said:
Hi,
First of all, I changed LCD. After that I install custom rom and about 6 months later my phone hard bricked !
Click to expand...
Click to collapse
Hi there,
Try this,
plug the phone charger and press volume up or down to get into the download mode of your phone.
Thank you
KIBS2173
KIBS2173 said:
Hi there,
Try this,
plug the phone charger and press volume up or down to get into the download mode of your phone.
Thank you
KIBS2173
Click to expand...
Click to collapse
Hi,
I tried that but there's no reaction!
Hope we can fix this dumb phone together :fingers-crossed:
Try this
malis20 said:
Hi,
I tried that but there's no reaction!
Hope we can fix this dumb phone together :fingers-crossed:
Click to expand...
Click to collapse
Hi there,
Have you tried using another PC or laptop.
Thank you
KIBS2173
Hello my xiaomi mi 8 lite is dead a while now. When connected on pc it is shown as qualcomm 9008. I think can charge it but i get only black screen. No led or backlight. It seems dead. I have reflashed it with different tools but nothing worked. I think i have to flas msimage and mprg files. Can anyone help me to identify their names and how i could get them? Thanks.
LooserD said:
Hello my xiaomi mi 8 lite is dead a while now. When connected on pc it is shown as qualcomm 9008. I think can charge it but i get only black screen. No led or backlight. It seems dead. I have reflashed it with different tools but nothing worked. I think i have to flas msimage and mprg files. Can anyone help me to identify their names and how i could get them? Thanks.
Click to expand...
Click to collapse
Hello anyone?
Is bootloader unlocked?
You can try following this guide : https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846 it should work on the mi 8 lite
ls wolf said:
You can try following this guide : https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846 it should work on the mi 8 lite
Click to expand...
Click to collapse
Thanks for the advice. But he uses a different phone with a different rom. Which ro m is suitable for unbricking my phone?
LooserD said:
Thanks for the advice. But he uses a different phone with a different rom. Which ro m is suitable for unbricking my phone?
Click to expand...
Click to collapse
Can anyone help please?
LooserD said:
Can anyone help please?
Click to expand...
Click to collapse
Did you solve something to put the ROM in your mobile?
I am the same, I have a nice Hard Brick, black screen, although it lights up when it is turned on, but without image. Without led ……
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The mobile is unlocked, but when I update it using MIflash Tool. I always get the same error message, "ERROR, MISSMATCHING IMAGE AND DEVICE"
I have already tried with images, China, Global, even Russian, in Fastbook format, with the same result, I think it is dead.
lopeaz said:
Did you solve something to put the ROM in your mobile?
I am the same, I have a nice Hard Brick, black screen, although it lights up when it is turned on, but without image. Without led ……
The mobile is unlocked, but when I update it using MIflash Tool. I always get the same error message, "ERROR, MISSMATCHING IMAGE AND DEVICE"
I have already tried with images, China, Global, even Russian, in Fastbook format, with the same result, I think it is dead.
Click to expand...
Click to collapse
Same here dead, black screen, not led but i can flash it with mi flasher by using the patched firehose 660. Flashing goes to 100% but the phone still dead.
http://www.mediafire.com/file/yh1qpgsb5f6o386/firehose_660-66X-636-63X.zip
But that patch is to pass the team to MI6x
You unlock the bootloader with MIUlock, and then, again to MI8lite, to be able to flash using ADB or MIflash.
Do this and you will see.
It gives me an error because of that, I have to return it to MI8lite. That is the doubt. We continue studying. If anyone knows any help ...
LooserD said:
Same here dead, black screen, not led but i can flash it with mi flasher by using the patched firehose 660. Flashing goes to 100% but the phone still dead.
http://www.mediafire.com/file/yh1qpgsb5f6o386/firehose_660-66X-636-63X.zip
Click to expand...
Click to collapse
How did u get there??? Why Is so many people having that issue?
VendettaMx said:
How did u get there??? Why Is so many people having that issue?
Click to expand...
Click to collapse
I do not know. Maybe a xiaomi protection system?
How can i check my hardware to see if cpu or gpu is dead?
LooserD said:
Hello my xiaomi mi 8 lite is dead a while now. When connected on pc it is shown as qualcomm 9008. I think can charge it but i get only black screen. No led or backlight. It seems dead. I have reflashed it with different tools but nothing worked. I think i have to flas msimage and mprg files. Can anyone help me to identify their names and how i could get them? Thanks.
Click to expand...
Click to collapse
You can follow this tutorial
https://www.youtube.com/watch?v=3QGvGgMJnhk