Hi, My HTC bricked and I don't know what to do !
Here are some details :
1. Can't turn on ! Just a black screen with no reaction !
2. Can't access to recovery mode/etc ...
3. When press and hold volume and power button nothing happened !
4. When connect it to PC, LED light start blinking !
5. When connect it to PC, My PC can't recognize Qualcomm HS-USB QDLoader 9008 ... and there is no port like that in device manager ! :crying: This error pops up :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. USB debugging is also another problem ! :crying::crying:
7. Don't know which model my phone is (for firmware download) ... and can't read it through PC (because of above problems) ! :crying:
Try this
malis20 said:
Hi, My HTC bricked and I don't know what to do !
Here are some details :
1. Can't turn on ! Just a black screen with no reaction !
2. Can't access to recovery mode/etc ...
3. When press and hold volume and power button nothing happened !
4. When connect it to PC, LED light start blinking !
5. When connect it to PC, My PC can't recognize Qualcomm HS-USB QDLoader 9008 ... and there is no port like that in device manager ! :crying: This error pops up :
6. USB debugging is also another problem ! :crying::crying:
7. Don't know which model my phone is (for firmware download) ... and can't read it through PC (because of above problems) ! :crying:
Click to expand...
Click to collapse
Hi there,
can you tell me how did it happen,
Thanks
KIBS2173
KIBS2173 said:
Hi there,
can you tell me how did it happen,
Thanks
KIBS2173
Click to expand...
Click to collapse
Hi,
First of all, I changed LCD. After that I install custom rom and about 6 months later my phone hard bricked !
Try this
malis20 said:
Hi,
First of all, I changed LCD. After that I install custom rom and about 6 months later my phone hard bricked !
Click to expand...
Click to collapse
Hi there,
Try this,
plug the phone charger and press volume up or down to get into the download mode of your phone.
Thank you
KIBS2173
KIBS2173 said:
Hi there,
Try this,
plug the phone charger and press volume up or down to get into the download mode of your phone.
Thank you
KIBS2173
Click to expand...
Click to collapse
Hi,
I tried that but there's no reaction!
Hope we can fix this dumb phone together :fingers-crossed:
Try this
malis20 said:
Hi,
I tried that but there's no reaction!
Hope we can fix this dumb phone together :fingers-crossed:
Click to expand...
Click to collapse
Hi there,
Have you tried using another PC or laptop.
Thank you
KIBS2173
Related
Please help to show me how to flash SE live with walkman by fastboot.
http://www.youtube.com/watch?v=JmvCpR45LKA
dumraden said:
http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
i know ur a pro,but u should help other who need helps....hhhh
same here cant get the fastboot to work with the up/down volume key
desire91 said:
i know ur a pro,but u should help other who need helps....hhhh
Click to expand...
Click to collapse
Im far from being one, and not trying to act as one. Most forums, along with this one, follow some rules, and some procedures need to be done.
People need to start using search buttons. I am here to help, but im not here to help people who cant help themselves in the first place. This is a forum, not kindergarten.
same here cant get the fastboot to work with the up/down volume key
Click to expand...
Click to collapse
Volume up goes into fastboot, volume down goes into SEMC recovery. You have the phone switched off, and while pressing the up button you connect through usb, If that doesnt take you to fastboot you have a bootloader locked device. Search for more info.
i think that i had unlocked the bootloadrer i used the test point method with s1tool( http://forum.xda-developers.com/showthread.php?t=1285285 ) it didn't gave me any error message, it looked like it worked fine, tried volume up volume down even the home button and various combinations of it... the volume buttons load the CWM and if i restart holding the volume up key it boots into charging mode...
but maybe i didnt get the bootloader unlocked, will try to unlock it later maybe i should try another unlocking method?
update my phone says Bootloader Unlock Allowed: No so the bootloader is unlocked but i cant enter into fast boot mode, why is it?
it's an already answered qstn
http://forum.xda-developers.com/showthread.php?t=1993703
chaopov said:
Please help to show me how to flash SE live with walkman by fastboot.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
an0nym0us_ said:
Click to expand...
Click to collapse
Even before I clicked on the spoiler, I knew this will be a burn!! :laugh::laugh:
help
helo,, please help me,, how to install fasboot driver on windows8 x64, ?
dendipradigta said:
helo,, please help me,, how to install fasboot driver on windows8 x64, ?
Click to expand...
Click to collapse
Tried the Search tool? Or Google?
http://flashtool.net/disabledrivers.html
sir,
when i connect my phone in fast boot mode the blue led glows,but my system says device does not recognized ....
i tried changing ports , they all work fine with any other devices ,even when my phone is in data storage mode ....
but in fastboot mode it says device does not recognised.....i reintalled all the drivers....also its win 8.1 ....and my phone
runs on cm11 ..... or else if you could suggest any other method for flashing kernel ....
thankyou
Hi,
Hope u help me guys as im really sad my TG01 looking completely dead.
What i did. I wanted just flash new soft from Miro so i charged the phone and did flash my phone from SD card as i did many times. After my phone stack in Logo TOSHIBA and just flash over and over. So i found the way how to unbrick the phone. So as they said i conected the phone to charger and after i connected pin 1-3 and press the power button the mobile vibrate and that was the last thing hi did. After that i cant charge it, screen is black, mobile is not connecting to PC at all (pc dont even recognise that the phone was connected to USB no sign of new usb item or start to instal drivers or so) so i dont really know what happend or whats wrong. I installed TG down loader with driver but there is no sign of connection after i connect phone to PC.
Can anybody help pleas ????
MarvX said:
Hi,
Hope u help me guys as im really sad my TG01 looking completely dead.
What i did. I wanted just flash new soft from Miro so i charged the phone and did flash my phone from SD card as i did many times. After my phone stack in Logo TOSHIBA and just flash over and over. So i found the way how to unbrick the phone. So as they said i conected the phone to charger and after i connected pin 1-3 and press the power button the mobile vibrate and that was the last thing hi did. After that i cant charge it, screen is black, mobile is not connecting to PC at all (pc dont even recognise that the phone was connected to USB no sign of new usb item or start to instal drivers or so) so i dont really know what happend or whats wrong. I installed TG down loader with driver but there is no sign of connection after i connect phone to PC.
Can anybody help pleas ????
Click to expand...
Click to collapse
hey my friend
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
why press power button
plase do this step! by step!:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
Yes i did tray this couple of times but with no success , when i plugged charger the charging red light dont flash red but i tray it anyway with charger on and off aswell.
I did it with the power button cose i read that somewhere and im scared i did burn or so something in MB as i had power charger plugged in i then short the pin 1 and 3 and then press power button. this is probably very bad way to go. the mobile is not responding to anything i tray
My TG01 has the same problem. I tried many times to flash a new ROM by "2 Short-Pin unbrick method" but nothing. @mirolg if you have some other ideas we are glad to hear you and to try on our dead phones.
I tried to port cm9 samsung galaxy s rom to u8860. Apperently it didnt turn out so well. I had a dload folder in my sdcard. and when i turn on the phone w/sd card it comes a green blue read screen(regular boot , recovery and download) and it beginst to upgrade from the dload i think. but it dosent make it all the way. it stops at ca. 30% every time. and bliking red led lapidly. DONT KONW HOW TO FIX IT!!!!
Pleas help
dv1234 said:
I tried to port cm9 samsung galaxy s rom to u8860. Apperently it didnt turn out so well. I had a dload folder in my sdcard. and when i turn on the phone w/sd card it comes a green blue read screen(regular boot , recovery and download) and it beginst to upgrade from the dload i think. but it dosent make it all the way. it stops at ca. 30% every time. and bliking red led lapidly. DONT KONW HOW TO FIX IT!!!!
Pleas help
Click to expand...
Click to collapse
Same problem here! Flashing back to B870 ROM is not possible! Always stops and starts blinking red LED forever!
Which ROM did you use?
Enviado desde mi u8860 usando Tapatalk 2
dv1234 said:
I tried to port cm9 samsung galaxy s rom to u8860. Apperently it didnt turn out so well. I had a dload folder in my sdcard. and when i turn on the phone w/sd card it comes a green blue read screen(regular boot , recovery and download) and it beginst to upgrade from the dload i think. but it dosent make it all the way. it stops at ca. 30% every time. and bliking red led lapidly. DONT KONW HOW TO FIX IT!!!!
Pleas help
Click to expand...
Click to collapse
Have you resolved this? I have the same problem, only on U8950-1. Can anyone help us?
tiringer said:
Have you resolved this? I have the same problem, only on U8950-1. Can anyone help us?
Click to expand...
Click to collapse
May u can go into recovery and wife data / cache / dalvik cache first .. and the go for upgrade via dload method
Could you solve your problem ? I am stucked in similar type of screen in Huawei G520-0000, and no help .
need help
my huawei g520-0000 face the same error of red ,green and blue screen. i can't use no recovery ,no fastboot and flashing new firmware is stop in middle of progress.
I Have this problem too with my g525. plzzzzzzzzz someone help me. anyone can resolve that??
I also have same problem
My huawei c8815 showing three colours boxes red green blue. In download mode goes to 30 % and stops. In pink screen mode 2 drives loaded
1. Android adapter modem 2. DBadapter reserved interface
please help me
please help me
i cann't repair blue screen in huawei g520-0000
tiringer said:
Have you resolved this? I have the same problem, only on U8950-1. Can anyone help us?
Click to expand...
Click to collapse
Any info how to resolve this problem anyone??
g630 same problem..
edit:
managed to get into QDloader 9008 mode, you need to know where to connect wire and then I guess U need files to flash it with QFIL software.
In my case:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, I so hope someone can help. i got this tab called Nextbook 700h and now it stock on boot image . It started when i installed an app called . . hmm i cant remember the name, it suddenly hangs and then when i turn off my tab it stucks on boot image so they called it as bootloop or bricked i think. . please help .. anyways i have the original firmware of it . .dont know how to reflash it cause it thosnt have CWM .
The steps here should be the same or very similar for you:
http://www.freaktab.com/showthread.php?441-Unbrick-Nextbook-7
Good luck!
ive done all the isntructions you've given but then my computer cant recognize my dive please help
Is it not recognizing at all, as in your go into your Device Manager and it doesn't change at all when you plug and unplug the device, or does it not load the driver correctly? There's a big difference between the 2 and how to resolve.
es0tericcha0s said:
Is it not recognizing at all, as in your go into your Device Manager and it doesn't change at all when you plug and unplug the device, or does it not load the driver correctly? There's a big difference between the 2 and how to resolve.
Click to expand...
Click to collapse
uhmm i think its the driver it isnt loading correctly , , ive tried to change my usb cable but it doesnt seems to work at all . . but then when i am plugin it i heard a sound . . a beep sound . . i think i;ve got the same problem
es0tericcha0s said:
Is it not recognizing at all, as in your go into your Device Manager and it doesn't change at all when you plug and unplug the device, or does it not load the driver correctly? There's a big difference between the 2 and how to resolve.
Click to expand...
Click to collapse
. . ahh well can you give me the instruction ?
Windows Key + the letter "R" then type: devmgmt.msc and hit Enter. Then plug in the device and see what displays, if anything.
es0tericcha0s said:
Windows Key + the letter "R" then type: devmgmt.msc and hit Enter. Then plug in the device and see what displays, if anything.
Click to expand...
Click to collapse
nothing happens , i have tried it many times even i put in on recovery when i try to plug it =(
es0tericcha0s said:
Windows Key + the letter "R" then type: devmgmt.msc and hit Enter. Then plug in the device and see what displays, if anything.
Click to expand...
Click to collapse
ohh after many attempt a driver named android pop up
Well, there's either another mode for it to be in to let the PC recognize it that you haven't found or it's really in trouble. Unfortunately, I've no idea.
es0tericcha0s said:
Well, there's either another mode for it to be in to let the PC recognize it that you haven't found or it's really in trouble. Unfortunately, I've no idea.
Click to expand...
Click to collapse
is there any way ?
this thing pop up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
es0tericcha0s said:
Well, there's either another mode for it to be in to let the PC recognize it that you haven't found or it's really in trouble. Unfortunately, I've no idea.
Click to expand...
Click to collapse
this is the thing that i wanted too talk about . . .
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
I have the same problem
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Pecan6 said:
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
Click to expand...
Click to collapse
Onilink90 said:
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Click to expand...
Click to collapse
First read this :
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
*CLICK THIS AND IN NEW TAB IN ADDRESS BAR REPLACE "INSERT_YOUR_IMEI_HERE" FOR YOUR ORIGINAL IMEI (BEHIND THE BATTERY) THEN YOU WILL SEE LINK ON THE PAGE CLICK THAT AND YOU WILL DOWNLOAD DIRECT FROM LG SERVERS
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button or VOL+ or VOL+ and VOL-
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
EDIT 5a BROKEN SCREEN SPECIAL
since your screens don't display you will have to test all key combinations
you can recognise download mode by opening device manager on pc and checking if only the 2 marked drivers are installed *(NOTE THAT PORT NUMBER MAY VARY)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
Click to expand...
Click to collapse
2 Report back