Hello friends
I have read some post on xda that changing baseband version can help the battery for long. Right now my configuration is
ANDROID VERSION:4.0.4
BUILD NUMBER:4.1.B.0.431
KERNEL VERSION:2.6.32.9 perf
BOOTLOADER LOCKED
NEO V MT11i
So. Anyone can help me to flash.64 baseband,or any other which gives good performance and battery life?
If you wanna try baseband 64 from .62fw, go here: http://forum.xda-developers.com/showthread.php?t=1504700
but personally, I think baseband 72 from .431fw is better.
why I say personally, because it's down to network operator, some people have problems with .72, while some have better signal and less drain.
Try and see
But baseband have nothing to do with performance.
gThanks for reply, but I tried that too,and stuck in boot loop with different boot logo.help.do I need to do anything else?
mayankbhatia5 said:
I tried that too,and stuck in boot loop with different boot logo.help.do I need to do anything else?
Click to expand...
Click to collapse
Different boot logo means you flashed kernel, not baseband(or at least not only baseband)
BB 72
hi Madyfish,
whats your review of BB72, worth flashing?
Thanks :laugh:
bombayboy said:
hi Madyfish,
whats your review of BB72, worth flashing?
Thanks :laugh:
Click to expand...
Click to collapse
Read my reply in this thread, post#2, nothing more to add.
Try and see, how it goes for you, feel free to report your results.
Related
hey guys,
i have already discovered something important about the problem of my phone LG P500h,
problem No GSM,
i read about RIL (Radio Interface Layer) and i think this my problem,
the photo said that my RIL and my baseband are not compatible.
so if u please can U help me by sending me the original files and how to flash,
i send u a photo about no RIL in my phone and baseband unknown
please don't hesitate my message,
thanks U all
omar1000 said:
hey friends,
i know that i do some mistakes.
my phone LG P500h
i have got a problem after flashing a different roms ranging from android 2.2 to 2.2.1 to 2.3.4
now i am using void.#forever r 1.6.15
now there is no GSM
first i thought my phone was locked but now i discovered that baseband unknown
then i tried to flash baseband but no success and flash different roms by different ways but no success.
the case now:
phone always airplane mode on.
the sim lock is choosed on.
not able to enter mobile networks.
radio is off
after using code *#*#4636#*#* i enter the menu that show me radio off and not able to set GSM band also
can U help me please, i hope that i didn't brick my phone
the one who will help me i will send him a gift donations 35$
thank u.
Click to expand...
Click to collapse
Did you flash the official 2.3.3 ROM from LG or any custom ROM based on official 2.3.3 before coming to void.#forever r 1.6.15???
P.S: Why do you need to give a donation for getting help??? If you want to donate, donate to the fantastic developers out there in the development forum.
gkarthik16 said:
Did you flash the official 2.3.3 ROM from LG or any custom ROM based on official 2.3.3 before coming to void.#forever r 1.6.15???
P.S: Why do you need to give a donation for getting help??? If you want to donate, donate to the fantastic developers out there in the development forum.
Click to expand...
Click to collapse
thak u,
i make a lot of mistakes so i am sure i have flashed official 2.3.3 after i flashed the void forever rom then get back again
for the donation it is like i take my device to repair at a shop,
and dont worry i will make donation for my favorite web site xda-devlopers.com
may be some help to restore the original baseband
the photos explain the story
thanks
omar1000 said:
thak u,
i make a lot of mistakes so i am sure i have flashed official 2.3.3 after i flashed the void forever rom then get back again
for the donation it is like i take my device to repair at a shop,
and dont worry i will make donation for my favorite web site xda-devlopers.com
may be some help to restore the original baseband
the photos explain the story
thanks
Click to expand...
Click to collapse
I cannot download the zip and see the photos as I'm in office now. Go through the below thread on how to flash a baseband.
http://forum.xda-developers.com/showthread.php?t=1149530
gkarthik16 said:
I cannot download the zip and see the photos as I'm in office now. Go through the below thread on how to flash a baseband.
http://forum.xda-developers.com/showthread.php?t=1149530
Click to expand...
Click to collapse
i am now reading and tying about one week
i think that this basebands in the thread is not compatible with p500h
coz i tried too much but still the baseband unknown
thanks
So...tell us whole story of what you did..if you flash oficial firmware did you made backup before installing void ROM?... your info about problem is so strange..
Sent from my LG-P500 using xda premium
U can try KDZ though to go back to 2.2
terratrix said:
U can try KDZ though to go back to 2.2
Click to expand...
Click to collapse
i tried to go back by kdz but still NO GSM
thanks
omar1000 said:
i tried to go back by kdz but still NO GSM
thanks
Click to expand...
Click to collapse
How about factory setting via 3845#*500# menu when in froyo
terratrix said:
How about factory setting via 3845#*500# menu when in froyo
Click to expand...
Click to collapse
i will try to get back to froyo then try and told U
thanks
omar1000 said:
i will try to get back to froyo then try and told U
thanks
Click to expand...
Click to collapse
its much better to go back to froyo' root your phone' install CWM 3.1' do a NANDROID BACKUP' flash the ROM & KERNEL u want but ALWAYS REBOOT after every flash..
after rooting your phone, i highly recommend to INSTALL TITANIUM BACK UP PRO & UNINSTALL the other FACTORY APPS (unnecessary apps) on your phone before doing a NANDROID BACKUP so it wont eat too much MB's on your memory card
hope that helps
omar1000 said:
i will try to get back to froyo then try and told U
thanks
Click to expand...
Click to collapse
sorry i tried froyo by KDZ, and tried to get back factory settings,
but Failed,
sorry i am really cofused about what happened
may be the GSM software
hey guys,
i think may be this related to GSM software.
please check the attached photo.
waiting for your opinin
thanks.
asking help from administrator
hello everybody,
i didnt get any rsponse, or just your oppinion about the problem,
please administrator,
try to help me,or just give me your opinion,
is my phone bricked,
thanks.
omar1000 said:
hello everybody,
i didnt get any rsponse, or just your oppinion about the problem,
please administrator,
try to help me,or just give me your opinion,
is my phone bricked,
thanks.
Click to expand...
Click to collapse
May I ask which baseband u downloaded from http://forum.xda-developers.com/showthread.php?t=1149530
spellspark said:
May I ask which baseband u downloaded from http://forum.xda-developers.com/showthread.php?t=1149530
Click to expand...
Click to collapse
thank U for interest,
after i got the problem i thought that the baseband problem,
then i installed P500-v10E-baseband, as i am using Void-Forever rom
as my phone P500h,may not compatible,
but failed
GSM not working, wifi OK
need your opinin, is my phone bricked,
where can i mend or buy new board,
thanks
near to be solved
hey guys,
read here please,
as i am near to find solution
as i changed the post about the problem
huys pls help ı cant open my device mt15i
whenever i start it it automaticialy shot down itself with red led battery widget
i dk what to do any idea ??
Charge it 1st ?
& let it keep the charging for 2 hours at least ...
now way this is a common problem i think for those who downgrade from 2.3.4 to 2.2 .
idk what should i do for solution
any other useful idea=??
Flash this kernel if you have 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1468043
It has 0% battery patch.
why did you do that??
read this: http://forum.xda-developers.com/showthread.php?t=1332399
Bozek said:
Flash this kernel if you have 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1468043
It has 0% battery patch.
Click to expand...
Click to collapse
is this compatible with 2.2 android version..?
are you sure?
im currently on 2.2 chinese version uploaded idk by chinese person in this forum
i mean is this kernel compatible with 2.2 android version?
Madfysh said:
why did you do that??
read this: http://forum.xda-developers.com/showthread.php?t=1332399
Click to expand...
Click to collapse
man man man man not time for joking @@
i have tried this kernel but does not work ,,,mine is 2.2.
when i mount kernel my phone it always stay the same screen !!!!!!!!!!!!!!!!!!!,
XPERIA screen and NOTHING HAPPEN??? WHY because it does not work for android 2.2 got it ??
it is not compatible with 2.2 android and does not work me @@
idk which kernel is compatible with 2.2 android version to fix 0% battery problem
it talks about for cm7 ?
is this kernel compatible with 2.2 ??
link is below:
http://forum.xda-developers.com/showthread.php?p=19158662#post19158662
Bozek said:
Flash this kernel if you have 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1468043
It has 0% battery patch.
Click to expand...
Click to collapse
There are many patched kernel idk which one is true??
by the way i Have upgraded my phone to MT15i_4.0.A.0.62(is this 2.3.3 or 2.3.4)
because i cant open my device cause battery 0 problem.
which kernel will fix 0 batter problem guyss???? plz help i have above version not 2.2 i have upgraded as i sad before
which patched kernel will solve this one for (MT15i_4.0.A.0.62).
Gulf War said:
by the way i Have upgraded my phone to MT15i_4.0.A.0.62(is this 2.3.3 or 2.3.4)
Click to expand...
Click to collapse
That is 2.3.4
Gulf War said:
which kernel will fix 0 batter problem guyss???? plz help i have above version not 2.2 i have upgraded as i sad before
which patched kernel will solve this one for (MT15i_4.0.A.0.62).
Click to expand...
Click to collapse
now try with link I gave above.
Madfysh said:
That is 2.3.4
now try with link I gave above.
Click to expand...
Click to collapse
there are a lot of link i dk which one is okay
could you give me a specific only one link ?
Thank you !!1
i have installed your link but??
the screen always stays same on the phone (Sony ercicsson make.believe)
nothing happen ?:İ(
my brothers i have solved the problem
i would like to thank miliions times who have contributed to fix this annoying problem.
Solution:
1-you should have 2.3.4 android version.
2-you need to mount below kernel in flash mode
http://www.mediafire.com/?7g6gz2mpp1ljb46
and thats all very easy but:
The critical line is that im not aware of it and i think most people in this site as well
..
the most important thing YOU SHOULD INSTALL A COMPATIBLE KERNEL WITH YOU STOCK OR CUSTOM ROM IF NOT YOU WONT BE ABLE TO OPEN YOUR PHONE
IT WILL ALWAYS STAY THE SUCH AS XPERIA OR SONY ERICSSON SCREEN
TO AWOID SUCH CASES BE CAREFULL AND BE AWERE OF THAT YOU INSTALL THE COMPATIBLE KERNEL WITH YOUR ROM
thank you!
Tbh if you don't know anything of kernel/rom compatibility you really shouldn't be flashing anything.
This is not a personal dig, just kills me the number of posts like this, where folk say they didn't know.
101 for anything firmware related, understanding the process and having a backup plan as things can and do go wrong
Most devs post recommended kernel either in Rom or in the post.
Sent from my MT11i using XDA
mpiekp said:
Tbh if you don't know anything of kernel/rom compatibility you really shouldn't be flashing anything.
This is not a personal dig, just kills me the number of posts like this, where folk say they didn't know.
101 for anything firmware related, understanding the process and having a backup plan as things can and do go wrong
Most devs post recommended kernel either in Rom or in the post.
Sent from my MT11i using XDA
Click to expand...
Click to collapse
you think each person know this procedure??
i think u shouldnt post such messages because i wrote above how i fixed the problem just would like to share my limited knowledge for those who dont even know such easy ways thats all!!!!!!!!!!!!
but as long as there coexist people who are like you in this forum even such collective good messages gonna be so hard
i wish i couldnt write this for your egoist view
Sent from Mt15i
You completely missed my point, the information is all here, but people jump in without reading first.
It's not that anyone is trying to limit anything, just read and understand before doing, much less trouble.
Sent from my MT11i using XDA
Hey guys. This SGSII cost me all my savings i've been making, and such I can't risk it to go to Samsung Service Center cause bad explanatons given.
So i ask you, how to 100% apply Root and CWM?
Here's my Model:
baseband: I9100BULP8
compilation nº: IMM76D.BULPG
It's a Portuguese stock SGSII with ICS 4.0.4.
Thanks, and please understand why i'm so worried about bricking it :/
NunoPitbull said:
Hey guys. This SGSII cost me all my savings i've been making, and such I can't risk it to go to Samsung Service Center cause bad explanatons given.
So i ask you, how to 100% apply Root and CWM?
Here's my Model:
baseband: I9100BULP8
compilation nº: IMM76D.BULPG
It's a Portuguese stock SGSII with ICS 4.0.4.
Thanks, and please understand why i'm so worried about bricking it :/
Click to expand...
Click to collapse
since you are on 4.0.4 your phone probably have the brick bug. The easiest and safest way to root is to flash siyah kernel 5.01 or earlier version via ODIN. I believe you know how to use Odin.
pasanjay said:
since you are on 4.0.4 your phone probably have the brick bug. The easiest and safest way to root is to flash siyah kernel 5.01 or earlier version via ODIN. I believe you know how to use Odin.
Click to expand...
Click to collapse
Nope, I don't. I come from Galaxy Ace. Never used Odin on it..and rooting was simple as aplying a .zip from recovery
NunoPitbull said:
Hey guys. This SGSII cost me all my savings i've been making, and such I can't risk it to go to Samsung Service Center cause bad explanatons given.
So i ask you, how to 100% apply Root and CWM?
Here's my Model:
baseband: I9100BULP8
compilation nº: IMM76D.BULPG
It's a Portuguese stock SGSII with ICS 4.0.4.
Thanks, and please understand why i'm so worried about bricking it :/
Click to expand...
Click to collapse
Well, if you want to be entirely save, just stay on the stock rom.
However, if you're willing to take the risk, because it's never 100% safe, check if you're having an insane chip and eventually root your device with Odin. Several guides and explanations here on xda (and Google also).
Sent from the Matrix
Donnie Sins said:
Well, if you want to be entirely save, just stay on the stock rom.
However, if you're willing to take the risk, because it's never 100% safe, check if you're having an insane chip and eventually root your device with Odin. Several guides and explanations here on xda (and Google also).
Sent from the Matrix
Click to expand...
Click to collapse
How do i check that chip thing and what you mean by "insane" chip? xD
NunoPitbull said:
How do i check that chip thing and what you mean by "insane" chip? xD
Click to expand...
Click to collapse
Install 'eMMC Brickbug Check' from the Play Store, and look for threads about the Brickbug. It's important you do this before rooting, because you're on 4.0.4.
Sent from the Matrix
NunoPitbull said:
How do i check that chip thing and what you mean by "insane" chip? xD
Click to expand...
Click to collapse
Check the link below for the 'eMMC brick bug check' app from stores, install the same and see if u have got a Sane or Insane chip on ur phone
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
even if its a Insane chip, there is no need to worry as long as u wont do anything silly (like Wiping Data on the stock kernel recovery of android v4.0.4).
Just flash Siyah kernel v4.1.5 or v5.0.1 (tar file for ODIN) on ur phone, as custom kernel's like Siyah and Dorimanx are BrickBug free kernels and will not effect ur phone when u perform 'Wipe Data/Factory Reset' from there Recovery
U can google for some Youtube Guides on 'How to flash Custom Kernel on galaxy S2 using Odin'
Good Luck!
Donnie Sins said:
Install 'eMMC Brickbug Check' from the Play Store, and look for threads about the Brickbug. It's important you do this before rooting, because you're on 4.0.4.
Sent from the Matrix
Click to expand...
Click to collapse
How that program works? Is it 100% secure?
I runed that app and nothing happens. Just says:
eMMC Chip:
Type: V3U00M
Data 10/2012
CID: many numbers
FW: 0x0e
Brick Bug?
NO: Sane chip.
NunoPitbull said:
How that program works? Is it 100% secure?
I runed that app and nothing happens. Just says:
eMMC Chip:
Type: V3U00M
Data 10/2012
CID: many numbers
FW: 0x0e
Brick Bug?
NO: Sane chip.
Click to expand...
Click to collapse
Lol,The app has done its wrk already ma8
u have a sane chip on ur phone, that means ur phone is not affected by the 'eMMC BrickBug'.
Still to be on the safer side u can install a custom Kernel of ur Choice Like Siyah v4.1.5 or v5.0.1 for example.
As the Cwm recovery that comes with it will aid in installing Custom Rom/Kernel of ur choice
Sun90 said:
Lol,The app has done its wrk already ma8
u have a sane chip on ur phone, that means ur phone is not affected by the 'eMMC BrickBug'.
Still to be on the safer side u can install a custom Kernel of ur Choice Like Siyah v4.1.5 or v5.0.1 for example.
As the Cwm recovery that comes with it will aid in installing Custom Rom/Kernel of ur choice
Click to expand...
Click to collapse
Maybe Samsung releasead the fix since i bough phone so late
Anyways, can you tell me how to apply the Kernel Siyah? What advantages/disatvnages it has in your opinion? ATM i'm jsut a bit sad my battery lasts 18h~ with medium usage...not even listening to music. I'm on the 3rd day using it..
NunoPitbull said:
Maybe Samsung releasead the fix since i bough phone so late
Anyways, can you tell me how to apply the Kernel Siyah? What advantages/disatvnages it has in your opinion? ATM i'm jsut a bit sad my battery lasts 18h~ with medium usage...not even listening to music. I'm on the 3rd day using it..
Click to expand...
Click to collapse
Take my Advice and Stay on Stock Rom for now and dont toss all ur Savings investd on ur phone into thin air
try things listed below to see the diff on batt life
1)If not in use Turn off ur Data/wifi.
2)Turn Off all autosync on ur phone (E-mail, gmail, Location etc)
3) Use more of WIFI (when its availble) over DATA as much as possible.
4)if ur using Facebook/Skype/Googlechrome etc then SEEK alternative apps like Freindcaster/Stock Browser as they r more friendly on ur batt compared to the former one's.
5) turn off ur Data when ur on a low netwrk signal area.
this way u can get more Juice out of ur battery for sure
NunoPitbull said:
Maybe Samsung releasead the fix since i bough phone so late
Anyways, can you tell me how to apply the Kernel Siyah? What advantages/disatvnages it has in your opinion? ATM i'm jsut a bit sad my battery lasts 18h~ with medium usage...not even listening to music. I'm on the 3rd day using it..
Click to expand...
Click to collapse
No offense, but I think you should try your phone for a few weeks first. Then you can start thinking about rooting, but first learn more about how to use it.
If you want to root it, read a lot first, because now you're asking things that are discussed a million times already.
Sent from the Matrix
NunoPitbull said:
Maybe Samsung releasead the fix since i bough phone so late
Anyways, can you tell me how to apply the Kernel Siyah? What advantages/disatvnages it has in your opinion? ATM i'm jsut a bit sad my battery lasts 18h~ with medium usage...not even listening to music. I'm on the 3rd day using it..
Click to expand...
Click to collapse
If you are not sure you better wait for the official JB update from samsung which will be released next month hopefully..Normally stock ICS roms have good battery life. When i was using stock ICS i was able to get through a day without much problem. With siyah kernel you can underclock and undervolt cpu to save battery.
If you dont know how to use Odin search google and youtube. There are so many videos regarding the matter. Just follow the instructions.
pasanjay said:
If you are not sure you better wait for the official JB update from samsung which will be released next month hopefully..Normally stock ICS roms have good battery life. When i was using stock ICS i was able to get through a day without much problem. With siyah kernel you can underclock and undervolt cpu to save battery.
If you dont know how to use Odin search google and youtube. There are so many videos regarding the matter. Just follow the instructions.
Click to expand...
Click to collapse
Yeah I know tehres alot of threadds - i searched though many of them. But many are different and explain different things, then have different problems, and thats why I get messed up...Then yesterday I saw that brck bug ... xD
Yeah I have no problem staying without root, i only miss setCPU/Titanium/Root explorer...
Thx for the tips, but I already do all taht It still says my Screen is using 50+% of battery... When I have all animations off and brighness on 20%... what more can I do?
EDIT: When JB gonna be released?
NunoPitbull said:
Yeah I know tehres alot of threadds - i searched though many of them. But many are different and explain different things, then have different problems, and thats why I get messed up...Then yesterday I saw that brck bug ... xD
Yeah I have no problem staying without root, i only miss setCPU/Titanium/Root explorer...
Thx for the tips, but I already do all taht It still says my Screen is using 50+% of battery... When I have all animations off and brighness on 20%... what more can I do?
EDIT: When JB gonna be released?
Click to expand...
Click to collapse
If you learn how to use odin correctly brickbug is not a problem. Anyway stay on stock until you learn things. Screen normally uses most of the battery. It is normal enjoy your phone. Official JB will be released next month. At least thats what samsung says. Please be patient and hit the thanks button
pasanjay said:
If you learn how to use odin correctly brickbug is not a problem. Anyway stay on stock until you learn things. Screen normally uses most of the battery. It is normal enjoy your phone. Official JB will be released next month. At least thats what samsung says. Please be patient and hit the thanks button
Click to expand...
Click to collapse
Hited my friend, and thanks for the patient. All of you thanks too!
Can you provide me a link for that of samsung? I tried to find but I only see "in Ocotber-November" they will release:s
Root it without using odin. Then you can play with titanium to freeze and stcpu to governate.
You already got a bunch of carrier bloatware in your device. Same happened to me.
I started reading this forum, double checkin' all the time on "what is the safest method for me?", and came across a cmw & busybox zip files, rooted. Then I discovered Mobile Odin and, as I had enough with ICS, went up to JB leak with it.
It was so cool to flash my device in half-a-smoke time, no carrier boot animation, no carrier bloat whatsoever, I'm looking at 1-2 days battery, smoothness with butter project, and a really good loking device compared with my friends GB & ICS (they go like "what tha....".
But the guys are right too, you really gotta start enjoying your device, It truly is...an amazong phone.
hey
i don't know what is the problem, but in this week i noticed that my phone freezes then restarts
sometimes it doesn't wake up from lock screen
why is that? since s2 is a high end phone? or is this problem with android? "even s3 lags on scrolling!"
how to solve it?
Rom? Kernel? Tweaks? What did you do? More info?
Sent from the Matrix
eraser0 said:
hey
i don't know what is the problem, but in this week i noticed that my phone freezes then restarts
sometimes it doesn't wake up from lock screen
why is that? since s2 is a high end phone? or is this problem with android? "even s3 lags on scrolling!"
how to solve it?
Click to expand...
Click to collapse
You're not special. Other people have had this type of problem so go read the topics that already discuss this/solutions.
Also, please use common sense and in future give relevant information instead of just asking for magic generic solution.
okay
it is stock rom xxlpx
not rooted
ver: 4.0.3
no tweaks, or custom kernel, it is just the official s2 rom and kernel
TheATHEiST said:
You're not special. Other people have had this type of problem so go read the topics that already discuss this/solutions.
Also, please use common sense and in future give relevant information instead of just asking for magic generic solution.
Click to expand...
Click to collapse
link!
eraser0 said:
link!
Click to expand...
Click to collapse
search!
This fantastic ROM and no problem thank God
try to get dmesg or some kind of log or else noone can help you wit reboots.
there's some kernel stuff mixed with sleep of death going on with your device.
"When in doubt, flash"
Hi guys i am on a smg925i i just rooted my phone and experienced some exra battery drain plz help anyone
You have Posted in Wrong Section My Friend. You have to Post in GALAXY S6 EDGE Q&A, HELP & TROUBLESHOOTING.
Krishhacker said:
Hi guys i am on a smg925i i just rooted my phone and experienced some exra battery drain plz help anyone
Click to expand...
Click to collapse
Although you posted in the wrong section, this happens because the stock samsung kernel once rooted disables 'deep sleep' you will need to flash a custom kernel if you wish to have root. (Without disabling deep sleep.)
christopherrrg said:
Although you posted in the wrong section, this happens because the stock samsung kernel once rooted disables 'deep sleep' you will need to flash a custom kernel if you wish to have root. (Without disabling deep sleep.)
Click to expand...
Click to collapse
What kernel do you have in mind?
Arter is close to stock, smooth with good battery life
D0M1N13 said:
What kernel do you have in mind?
Click to expand...
Click to collapse
I agree with the below poster, arter has kept me good for days. Doesn't get updated much now so if you're looking for the latest you may have to find one.