So... first of all.. i'm relocked, hboot 1.5xx, s-off, official ics
This morning I switched on my evo, looked at time and then suddenly screen came black..
Only sensor buttons worked
Then I tried to remove the battery and power on again
Display was OK but just for a few seconds.. then it began blinking or came black again.. I tried factory reset but no working..
Now screen isn't working, but i can hear HTC sound when i power it on.
Sensor button vibrating when i touch them..
Is it screen failure? Where can I buy new(original would be better) touchscreen?
Or I should try to post it to shop for repair (i think im not under warranty)?
thanks
If you plan on replacing the screen yourself, I'd open it up first and check all the ribbon cables and make sure they are secure. I've had something that simple happen on an HD2 repair. Was set to replace the whole screen and digitizer and the only thing wrong was the digitizers flex cable came loose.
Sent from my PC36100 using Tapatalk 2
I can blindly unlock my screen so i think digitizer is OK, isnt it?
All i just need is this or? http://www.ebay.com/itm/New-OEM-HTC...664?pt=LH_DefaultDomain_0&hash=item336a5156f0
Yeah....but what I'm saying is check before buying it.
Because it could be as simple as the LCD screens flex cable coming loose from the motherboard of the phone. So all you'd have to do is plug it back in and apply some tape.
Sent from my PC36100 using Tapatalk 2
i dont have good screwdrivers at home :X
i also concider that i will try to send it back to shop for repair
If they wont repair it, is possible to pay HTC to repair it?
sry for my english .)
thx
Related
HTC legend. Screen behave very strangely.
When you turn phone on its kind a OK, but in some time strange things happen.
Some parts of screen are unresponding. Or for example if you slide at the bottom of the screen it acts as if you pull status bar down.
Some times every touch tries to pull status bar down. But then again it will be normal.
Is that a hardware or software problem.
I tried hard reset too, didnt help. So is it screen itself then?
I would change it, but still not sure about it. Why its not bad all the time?
Thanks for all the help.
Search for TouchRecalibrate in Market maybe that helps.
Sent from my Revolver powered Asus Transformer TF101 with Tapatalk
hardware i'm afraid.
had the same problem after my phone got wet along with me in bat-****-crazy storm.
you don't need to replace the lcd, just the digitizer.
i picked one up off ebay for £10.
the replacement process is kinda scary in places - mainly prising the digitizer off the lcd.
if you're still under warranty and the damage wasn't obviously caused by yourself (that includes getting water inside the casing - the water residue gives it away unfortunately) i'd flash back to stock and rma it.
Well I thought it will be digitizer too.
Already ordered one. And yes, my missus dropped it in to a toilet after just 2 months since she bought it new. Just didn't had time to get to it till now. And warranty doesn't apply for this
She should have bough same like me - Defy
So dropped phone and screen went out. Replaced amoled and digitizer, device powered on and lit up home keys, but no display still. Replaced main board, in case video was out on board, but no joy. Any thoughts? No custom software or anything....
Maybe you didn't clip on the ribbon cables all the way. Or, just try pulling the battery and booting it again.
When I replace my screen, screen didn't work for first few boots.
ddochi11 said:
Maybe you didn't clip on the ribbon cables all the way. Or, just try pulling the battery and booting it again.
When I replace my screen, screen didn't work for first few boots.
Click to expand...
Click to collapse
I checked and checked, digitizer works, I can reboot and swipe unlock, adjust volume, but no screen. At this point I'm thinking bad LCD. Thoughts?
Thx for response and ideas though....
I bought a replacement but ut was a cheap fake, not an OEM screen. It went purple then black within 10 minutes. I got my money back (thank you PayPal) and made sure the next one was an OEM screen.
I hope you didn't spend too much on the repair parts. You can pick up a new Note for about $290 now.
Hello, i got a Galaxy ace, and i replace the screen, lcd and digitizer cuz they were broken, because my girlfriend, have an attack, and drop the phone hard to the floor, i replace both screen, and now, i get into "Download mode" (blind) and i could update the rom (stock) via Kies, but the phone still have the white screen, from boot, always have white screen, after and before screen replacement. NEED HELP Please !
miloosj said:
Hello, i got a Galaxy ace, and i replace the screen, lcd and digitizer cuz they were broken, because my girlfriend, have an attack, and drop the phone hard to the floor, i replace both screen, and now, i get into "Download mode" (blind) and i could update the rom (stock) via Kies, but the phone still have the white screen, from boot, always have white screen, after and before screen replacement. NEED HELP Please !
Click to expand...
Click to collapse
I think your screen digitizer or lcd is not connected correctly to connecter of display so check that or your lcd has problem..there is no problem of software..just check your display is connected right or your display has peoblem..
Press thanks if i helped u..
Sent from my GT-S5830i using Tapatalk 2
most likely hardware not soft
IF YOU BREAK IT SORRY BUT YOU CAN TRY
open up again clean sockets inspect phone for visual damage (near screws edges etc.) to the board
connect screen to board outside of case so you have access to screen socket plug in the charger and gently touch the ribbon/socket when on if no changes try gently bending the board (very gently you do not want to make something loose or even worse snap the thing) see if any effect on display post any findings
|PS its easy to buy faulty screen as they are not transported the way they should be try to replace
Thanks, ill try all advices i hope i can do something with it, cuz she has a few things on it, that she will like to preserve.. and u know.. if she dont get it, will be my fault.. haha Thank so much ! hehe
Hi,
Trying to fix a Z2 for a friend. She dropped it, smashed the screen. You could still see the LCD, but the digitizer was fubar. Ordered a new screen assembly, but after the replacement only the LED backlights work - no LCD at all. To test, I reinstalled what was left of the old screen, and no LCD, just backlight, so I don't think it's the new screen. So then I ordered a new main ribbon cable and replaced it. Same result: no LCD, just backlight. You can hear the phone on when it's on, the phone "responds" when you touch the screen, you just can't see anything. I upgraded to the latest software update tonight using PC Companion, but no change.
So, the only thing left is the motherboard, right? I know there is a fuse on the motherboard that, when it fails, it kills the backlight and leaves you with only the LCD. I have the opposite problem. I'm hoping maybe there is something like that for the LCD??
Thanks in advance,
Heath
I have same issues with you and also try ten new lcd all show backlight only..what your solution??
Have you tried to connect it via a MHL cable to TV ?
Hi there - I am wondering if I can get some help here.
I had an old working HTC Evo 3D and I use it as a spare phone during travel to use prepaid SIM cards. I wanted to change the complete housing of Evo 3d and purchased a front, middle & back frame from online OEM vendors. As a newbie, I was so excited and started to disassemble the phone and to put into the new housing. All went well till I started to take the LCD and digitizer from the old housing. I made a mistake and ripped the flex cable of the digitizer. I felt very bad and then I decided that I need to order a new digitizer online.
I continued to reassemble the phone with the new housing till I receive my new digitizer. I made sure that I kept the sticky tape in the front housing intact so its easy to take it again. I completed the assembling and when I turned on the phone the LCD was displaying white and black dots like grains. However, I could hear the HTC boot sound the “Quietly Brilliant” sound. At this point, I thought I have damaged the LCD too.
Today, I tired to switch again, I dont see the phone booting-up or hear the boot-up sound or see the white and black grain screen. When I charge the phone, I see the red LED light and then after some time it turns green. I tried all type of resets like power+volume buttons, power+camera button, long press power button. However, I dont think anything is happening.
Now, I am worried if the problem is now with the display or I damaged the motherboard. Does anyone know if the phone wont start if there is a damage to the LCD/digitzer? I am just waiting to know what might be the problem before ordering LCD/digitizer. I am unable to check which part is damaged now.
Thanks in advance!