Hi. I have been searching rom to mpman mp720 for about a year and haven't found any. If anyone has got it would somebody send it to me! also i have been trying to upload a rom from several tablets but nothing works so far. also fasboot does not work. only fwdn mode.
I got the fastboot working. have tried a lots of roms and system images. still no luck. one flashing showed the green light on fwdn but it got to boot loop. also adb worked for about an hour.
the funny thing i have also noted is that if someone starts speaking about mpman mp720 in any forum the whole thread just stops. its not that bad??
original firmware found MPMAN MP 720
hey guys, new to this, just got a MP720, not much firmware about for this one, not must of anything really,
I did however find this site with links to the to original firmware from MPMAN,
using google translate haha, it seems the two flavours of chipset for this taplet,
Hynix NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Hynix.rar
Micron NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Micron.rar
Flash Tool:
https://dl.dropbox.com/u/29403117/upgrade tool and Introduction.rar
that said i have not tested these FW's and cant vouch for the safety of using them,
I'm not a developer but hopefully they could be usefull for making a cyanogenmod for it (fingers crossed haha) or some one who has bricked there tap,
source:
https://slo-tech.com/forum/t528078
I have downloaded these files so if the link becomes dead please let me know and i will send them
Related
Sal all,
I cannot find firmware for this tablet. It's a 7inch, dual camera, atm7029 quad core cpu, that doesn't start, but i can write firmware with Actions Pad Product Tool.
The only available firmwares for this type of cpu (atm7029) i was able to find, were from Ainol tablets, but these are not good.(only lights start 1sec)
Can someone help ?
10x in advance !
Hi! There is a similar device firmware from (Russian): (yadi.sk/d/Wku6HWTxKkaKa)
But WiFi and camera other.
System image
Here is the image of the system partition. Dumped with ADB from a working tablet. (512MB)
(mediafire.com/download/roc8870rirvt3hw/actc_system.img)
And this is the image of the recovery partition: (48MB)
(mediafire.com/download/fd30kaio8xb490j/acta_recovery.img)
If you want to see what's inside the images, mount the image in Linux, or use Linux Reader if you're using Windows.
How to use the actc_system.img and acta_recovery.img
Hi, I'm an android newbie needing help. I found this thread while searching for how to deal with a bootlooping Orion TAB-700qc tablet belonging to a friend.
Apparently my friend tried to update the tablet with the wrong update (I'm not really sure what he did), but it went into a bootloop -- it will not get past the "android" screen. I found how to go into the Recovery menu but nothing there would fix the problem. I have downloaded the actc_system.img and acta_recovery.img discussed in this thread, but I need step-by-step instructions for how to use them to get the tablet working again.
Can someone please direct me to instructions that I as a newbie will understand? I have worked a lot with pc's but I have almost no experience with androids.
Thanks,
cmNhu
Hello, I used the tablet for one day, then the touch screen in windows partition stopped working and randomly lock screen appears. In android partition touch works fine but lock screen appears. I tried to reset but I didn't resolve. I couldn't find useful drivers, help please. Thanks
problem with touch in windows? simple solutin: use LINUX
Hey dude... try to connect OTG with usb mouse and then go and update windows drivers... this might help..:good:
Hi Guys,
I´m searching for the drivers too. Did anybody know where I can find the correct drivers?
Thanks
toto1988
Try to download the file from the link below
https://drive.google.com/drive/u/0/folders/0B7-zsgO0i8kZVXF1YWszMWlpWkk
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
donlimck said:
Try to download the file from the link below
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
Click to expand...
Click to collapse
WORKS!!!!
Thanks!!
Please hellp!!
How to boot into android recovery mode of obook 20 plus. I tried pressing the power and volume buttons together further... If boot menu of windows side is there please tell me
Thanks
donlimck said:
Try to download the file from the link below
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
Click to expand...
Click to collapse
Ooh thank you very much, half my hair is pulled out. Couldn't figure this **** out.
Help.... accidentally formated the drive of android through disk management
---------- Post added at 08:39 AM ---------- Previous post was at 08:39 AM ----------
Don't know how to flash back original one
Also have a ONDA oBook 20 Plus tablet, tried to install LInux Kali, and screwed the partitions. Still have acces to bios by hitting scape. Any help to unbrick this chinese knock out.
ROOM, ROOT, TWRP, REMIX, obook 20 plus
Hi Tony..
Its been couple years since I abandon onda forum project..
Back in days I've been one of the few that been hunting in Chinese websites trough translator to find anything for onda obook 20 plus.. Firmwares, root tutorial and other useful info.. All what I've find, I post on the onda forum. When I got notify about your post I've dig back into Gmail to find a link for my guides that I've translated and tested as working. Sadly the forum doesn't existing any longer.
Good for you is that I had some data stored in my Google drive
Here link for some android 5:
https://drive.google.com/file/d/0B7-zsgO0i8kZZlhQRVBQbDFSeU0/view?usp=drivesdk
If your partition are screwed up, I will start with gparted live and investigate what happen.
I remember my headache when I brick it for a first time... I was left with tablet that turn to black screen. I've put a android onto a USB led drive and boot it. Luckily a fastboot pop up for me and I was half way winner.
Update:
I find the second folder with the obook 20 recovery. There few rooms,, the only one TWRP custom recovery and also android remix 2.0 :
https://drive.google.com/folderview?id=0B7bzuJLiWwaHLWlVcTJSZGxTV2M
There is also a oldboot and boot image. Those are for flashing TWRP, the fastboot will not let to flash TWRP, you need to first flash the modified boot.img and then boot TWRP.
Be aware I noticed that after flashing the modified boot image the tablet randomly been snapping a photos during boot up and been pain in arse.
If no need to root it don't mess around with it like I did with mine.
I no longer have the crappy obook so Good luck.. If need any more tips, hit me up.
[email protected] said:
ROOM, ROOT, TWRP, REMIX, obook 20 plus
Hi Tony..
Its been couple years since I abandon onda forum project..
Back in days I've been one of the few that been hunting in Chinese websites trough translator to find anything for onda obook 20 plus.. Firmwares, root tutorial and other useful info.. All what I've find, I post on the onda forum. When I got notify about your post I've dig back into Gmail to find a link for my guides that I've translated and tested as working. Sadly the forum doesn't existing any longer.
Good for you is that I had some data stored in my Google drive
Here link for some android 5:
https://drive.google.com/file/d/0B7-zsgO0i8kZZlhQRVBQbDFSeU0/view?usp=drivesdk
If your partition are screwed up, I will start with gparted live and investigate what happen.
I remember my headache when I brick it for a first time... I was left with tablet that turn to black screen. I've put a android onto a USB led drive and boot it. Luckily a fastboot pop up for me and I was half way winner.
Update:
I find the second folder with the obook 20 recovery. There few rooms,, the only one TWRP custom recovery and also android remix 2.0 :
https://drive.google.com/folderview?id=0B7bzuJLiWwaHLWlVcTJSZGxTV2M
There is also a oldboot and boot image. Those are for flashing TWRP, the fastboot will not let to flash TWRP, you need to first flash the modified boot.img and then boot TWRP.
Be aware I noticed that after flashing the modified boot image the tablet randomly been snapping a photos during boot up and been pain in arse.
If no need to root it don't mess around with it like I did with mine.
I no longer have the crappy obook so Good luck.. If need any more tips, hit me up.
Click to expand...
Click to collapse
Have you had problems with the touchscreen on Windows 10? After reinstall Windows, my touchscreen don't work very well.
donlimck said:
Try to download the file from the link below
https://drive.google.com/drive/u/0/folders/0B7-zsgO0i8kZVXF1YWszMWlpWkk
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
Click to expand...
Click to collapse
Hello, sorry to reply to an old topic, but I can't download the file from Google Drive you linked.
Can you please reupload or reshare, please? Tried to download from the ONDA website but I don't understand Chinese nor have a baidu account.
Alpha120 said:
Hello, sorry to reply to an old topic, but I can't download the file from Google Drive you linked.
Can you please reupload or reshare, please? Tried to download from the ONDA website but I don't understand Chinese nor have a baidu account.
Click to expand...
Click to collapse
Onda - Google Drive
drive.google.com
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
Hi, noob here!
I have a Coolpad Torino S (a cheap Chinese Android 5.1 phone) I was using to tether a few devices to the internet. A few days ago it started behaving oddly, so I restarted it. As expected, it restarted and brought up the manufacturer logo splash screen. It then went to a black screen and vibrated non-stop.
It has a non-removable battery, so I held down power until it switched off, but all it did was bring up the logo again (without turning off) and then vibrated relentlessly.
After a bit of trial and error, I managed to get into recovery. I wiped the cache and restarted - endless vibration.
I returned to recovery and factory reset the phone, then restarted - endless vibration.
I've never seen this behaviour from a phone before. I realise I've probably killed it, but I wonder if reflashing the firmware might stop this vibration issue (as it does seem like a software problem). The problem I face is that there does not seem to be a single stock or custom ROM anywhere on the web for this device. One Russian website claims to have the stock ROM, so I downloaded it, but the RAR file is password protected (with no hint as to what the password might be), and so utterly useless.
I'd appreciate any advice on how I might fix the phone or find a ROM!
The model number is E561 (bizarrely, there is a near-identical Coolpad phone - the Coolpad Fancy - that shares the same model number despite having different hardware in several key areas, so I don't know whether using that ROM is a risk worth taking).
Hi , here is right firmware for your device:
https://files.fm/u/5auxsp2g
How to flash examle :
https://www.youtube.com/watch?v=b_yyilVsn5I
Good luck ...
Teddy Lo said:
Hi , here is right firmware for your device:
Good luck ...
Click to expand...
Click to collapse
Thanks a lot! However, that appears to be for the Coolpad Fancy rather than the Torino S (same model number, different spec). The ROM in the link is for a phone with (apparently) half the storage capacity (8GB vs 16GB in the Torino S) and a different version of Bluetooth (4.0 vs 4.1 LE in the Torino S). I think I read somewhere else that the Fancy has a lower res video on the camera too.
Will it be safe to flash onto the wrong phone? Obviously it can't get much worse than its current state, but at least it's vaguely responding when I turn it on etc at the moment...
tesbreag said:
Thanks a lot! However, that appears to be for the Coolpad Fancy rather than the Torino S (same model number, different spec). The ROM in the link is for a phone with (apparently) half the storage capacity (8GB vs 16GB in the Torino S) and a different version of Bluetooth (4.0 vs 4.1 LE in the Torino S). I think I read somewhere else that the Fancy has a lower res video on the camera too.
Will it be safe to flash onto the wrong phone? Obviously it can't get much worse than its current state, but at least it's vaguely responding when I turn it on etc at the moment...
Click to expand...
Click to collapse
Hi , don't flash firmware for Fancy , I will upload on the internet correct firmware for Torino soon , sorry I didn't checked that first firmware is for Fancy . Stay updated
Teddy Lo said:
Hi , don't flash firmware for Fancy , I will upload on the internet correct firmware for Torino soon , sorry I didn't checked that first firmware is for Fancy . Stay updated
Click to expand...
Click to collapse
Hi again. Thanks for the clarification!
Just to confuse things more, my phone is the Coolpad Torino S. There is another phone called the Coolpad Torino which again is a different phone entirely (much bigger screen and very different hardware than the Torino S).
It is quite easy to find ROMs for the Fancy and (IIRC) the Torino. It's the Torino S that is impossible to find. so if you can help with that I'd be very grateful!
tesbreag said:
Hi again. Thanks for the clarification!
Just to confuse things more, my phone is the Coolpad Torino S. There is another phone called the Coolpad Torino which again is a different phone entirely (much bigger screen and very different hardware than the Torino S).
It is quite easy to find ROMs for the Fancy and (IIRC) the Torino. It's the Torino S that is impossible to find. so if you can help with that I'd be very grateful!
Click to expand...
Click to collapse
This firmware is for Torino S verion like in this video! If you don't know what is what send your device to repair center.
https://www.youtube.com/watch?v=VH8Shjl6_hs
Teddy Lo said:
This firmware is for Torino S verion like in this video! If you don't know what is what send your device to repair center.
https://www.youtube.com/watch?v=VH8Shjl6_hs
Click to expand...
Click to collapse
Thanks for the reply. I don't know if I said something wrong and if I did I apologise - it was never my intention. This whole Coolpad situation is very confusing, that was my only point (three phones, 2 with almost identical names and 2 with identical model numbers, all completely different!)
I did see that video before but based on the images I assumed it was for a manual update to a working phone (as it goes into settings etc). I will look into this solution if you think it is indeed the appropriate file?
Coolpad seem to offer zero support, so even if I wanted to send it to a repair centre, it would be impossible!
Thanks again!
tesbreag said:
Thanks for the reply. I don't know if I said something wrong and if I did I apologise - it was never my intention. This whole Coolpad situation is very confusing, that was my only point (three phones, 2 with almost identical names and 2 with identical model numbers, all completely different!)
I did see that video before but based on the images I assumed it was for a manual update to a working phone (as it goes into settings etc). I will look into this solution if you think it is indeed the appropriate file?
Coolpad seem to offer zero support, so even if I wanted to send it to a repair centre, it would be impossible!
Thanks again!
Click to expand...
Click to collapse
Hi , no problem dude just I wanted to help you to solve your problem with your device . That is truth that unknown device like yours is complicated with support and the only available firmware for your device was that what I send you.
This flash file is for your device Coolpad Torino S E561 (SK3-U00) Dual SIM also you have same new device with same firmware SK3-U00 . Google a little bit this and you will see the new devices has the same firmware version . I know it is shame for support but what can I say to you about is to don't buy unknown devices and if you thinking about buying like those devices do little research about their support and what problems can you face with that device .
I wish you all the best with your unbricking device .
With Respekt
Teddy Lo said:
Hi , no problem dude just I wanted to help you to solve your problem with your device . That is truth that unknown device like yours is complicated with support and the only available firmware for your device was that what I send you.
This flash file is for your device Coolpad Torino S E561 (SK3-U00) Dual SIM also you have same new device with same firmware SK3-U00 . Google a little bit this and you will see the new devices has the same firmware version . I know it is shame for support but what can I say to you about is to don't buy unknown devices and if you thinking about buying like those devices do little research about their support and what problems can you face with that device .
I wish you all the best with your unbricking device .
With Respekt
Click to expand...
Click to collapse
Thanks for all your help so far. I've downloaded and extracted the firmware file, and YGDP v4.03 as recommended.
One more question... would the Coolpad driver in the Fancy file you linked before be the same for the Torino S? I'm guessing the drivers are the standard Qualcomm USB drivers, right?
tesbreag said:
Thanks for all your help so far. I've downloaded and extracted the firmware file, and YGDP v4.03 as recommended.
One more question... would the Coolpad driver in the Fancy file you linked before be the same for the Torino S? I'm guessing the drivers are the standard Qualcomm USB drivers, right?
Click to expand...
Click to collapse
Probably it will work if not use this one:
https://drive.google.com/uc?id=1M4HjlqcwcTUJNRKufa5Vr4oejVTUE24D&export=download
Good luck , and let me know if you fixed
Teddy Lo said:
Probably it will work if not use this one:
https://drive.google.com/uc?id=1M4HjlqcwcTUJNRKufa5Vr4oejVTUE24D&export=download
Good luck , and let me know if you fixed
Click to expand...
Click to collapse
After a great deal of messing around with different versions of YGDP and various CoolPad drivers, I finally got to the point where YGDP was able to find and transfer data to my phone.
10 minutes later, the phone rebooted and now it seems to be fully working!
Many thanks for your help!
An update on this, a year and a pandemic on. The phone has died again, and this time YGDP won't bring it back.
It is failing with a flash write error, so I can only assume this is now a hardware fault, unless any XDA geniuses can suggest anything further to try? YGDP gives the following errors:
Code:
12:32:38 CELL0: Start to download emmc_appsboot.mbn file ...
12:32:38 CELL0: transmit emmc_appsboot.mbn file size info OK
12:32:39 CELL0: Fail to transmit emmc_appsboot.mbn file Flag code
12:32:39 CELL0: Res:flash write failure
12:32:39 CELL0: Fail to transmit emmc_appsboot.mbn file data !
12:32:39 CELL0: Lock bootloader ...
12:32:39 CELL0: Download failed,please try again!!
12:32:39 CELL0: Total download time elapsed: 0 min : 2 sec
12:32:39 CELL0: Downloading all files: Failed!
I can still get into Recovery (which also flashes up a litany of cache read/mount errors), and have tried wiping caches and factory resetting multiple times.
Any final suggestions before I consign it to the scrapheap?
Hey same issue here, can you please explain how you managed to get it to recovery?
coolpad e502
Dear Friends,
maybe you find this request stupid, but... My small daughter became an old crappy tablet as a gift. For YouTube an some movies was the machine OK, but was full with trash software and apps. I decided to re-flash the device with the latest possible and clean FW (the thing i do with every device...). The mentioned device is a cheap Polish license, Chinese made machine. Finding the right FW was absolutely not easy, but i found one exactly for this device. Regarding to the comments it was, but the reality was not. The flash went without problems via SP Flash Tool, but after that the device doesnt start-up. The PRELOADER was maybe from other model, or it was somewhere mismatch but the SP Flash Tool let me flash the device and bricked it -> DRAM ERROR 4032. Since this time, i try to download and flash tons of GBs of FWs, but without luck. Always DRAM error, chip or EMMC / NAND mismatch. I have never experinced troubles like this...
I have some information about the device, can you please assist me to restore to FW ?
Lark Evolution X2 7 3G-GPS
Android 4.2 or 4.4.2
MT6572
Thank you very much !
dwnldr said:
Dear Friends,
maybe you find this request stupid, but... My small daughter became an old crappy tablet as a gift. For YouTube an some movies was the machine OK, but was full with trash software and apps. I decided to re-flash the device with the latest possible and clean FW (the thing i do with every device...). The mentioned device is a cheap Polish license, Chinese made machine. Finding the right FW was absolutely not easy, but i found one exactly for this device. Regarding to the comments it was, but the reality was not. The flash went without problems via SP Flash Tool, but after that the device doesnt start-up. The PRELOADER was maybe from other model, or it was somewhere mismatch but the SP Flash Tool let me flash the device and bricked it -> DRAM ERROR 4032. Since this time, i try to download and flash tons of GBs of FWs, but without luck. Always DRAM error, chip or EMMC / NAND mismatch. I have never experinced troubles like this...
I have some information about the device, can you please assist me to restore to FW ?
Lark Evolution X2 7 3G-GPS
Android 4.2 or 4.4.2
MT6572
Thank you very much !
Click to expand...
Click to collapse
?
https://www.needrom.com/download/lark-evolution-x2-7-3g-gps-android-jelly-bean-4-4-2/
joke19 said:
?
https://www.needrom.com/download/lark-evolution-x2-7-3g-gps-android-jelly-bean-4-4-2/
Click to expand...
Click to collapse
Thank you very much for your response. That was exactly the first ROM which i used, and the ROM which bricked the device. In scatter file and in the description is mentioned MT6582 as chip. My opinion was, this is mistake, so i edited the the scatter file to MT6572 to match my needs. But as i wrote upper, it was something different...