[Q] Speed Dial Issie - Galaxy S III Q&A, Help & Troubleshooting

Hi Everyone,
I got the GS3 two days ago and I was trying to use the speed dial today.
Whenever I tried to use speed dial. The phone will show: "USSD code running ..." then after few second, a window will pop up: "Unknown Application"
I would like to know is that just my phone? Anyone got similar issue?

BUMP

Related

Why does it always say "Conditional call forwarding active" when I make any call?

Why does it always say "Conditional call forwarding active" when I make any call?
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
I am on Three and I get the same message although my S2 was purchased from O2 then rooted. I have not seen any other reports about this but the message has not bothered me.
I have the same message. Ave tried several hings without success, however since it really does nothing, I am starting to get use to it. But if someone knows how to solve it please let us know
voice mail
Hi guys i have this to but it only started when i activated my voicemail so i think its down to the voicemail
e.g if your on the phone and someone else calls they are placed forward to your voice mail ???
hope this helps
Hey there guys, thanks for the replies so far, glad to hear others are experiencing this annoying problem. I seem to have had this since rooting it, originally T-Mobile though I am 99% it was never "locked" to the network for some reason as I mentioned as I have never had to enter the 00000000 code, which the free ChainFire sim app gave me (seems like it means it is unlocked already???). The guys on the 3 helpline were giving me loads of codes which weren't of any help, and telling me about what options I could fiddle around with, but I had tried all of these to no avail.
Are people also getting the MMI message I mentioned in my original post, whenever they enter # codes in the dialer? It seems to me that both of these problems started at the same time (this error message and the forwarding issue - I am sure they are linked). It means, for example, I probably won't be able to set up a speed dial because of it, nor will I be able to use the "secret codes" as mentioned in the dedicated thread of the same name on this site.
Why is it a problem for some and not for the majority of people, we must have something in common which we have done with our phones which has caused this?
I really hope someone can sort this annoying problem out.
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
BarryH_GEG said:
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
Click to expand...
Click to collapse
Cheers for the reply Barry, yeah I expect it is normal but the thing is I cannot change these settings, my phone won't let me as an error comes up. I know it's not a major problem, just a bit annoying I can't get it to go away. I can't disable those three things, I tried a few times already.
Plus, I constantly get the MMI error message, which I mentioned before, seems a bit of a coincidence how these problems started the same time. I can't enter the majority of "#" codes into the dialer, it always says "USSD Running" or something along those lines and then produces the message like 2 seconds later.
Any ideas? Thanks so far for the advice
I have this problem but unlike all others I cannot make any calls on account of it. When I try to disable call forwarding I get an error msg saying it's not supported by the operator.
There HAS to be a way to fix this. I cannot make any calls or use 3G.
Try this
menu-call-additional setting-select network default...
It work with my sgs2.
On the Galaxy S2 if you go to: settings-call-call settings-call forwarding-voice call forwarding -- You will most likely see that for unanswered or unreachable calls it's not disabled because it forwards it to your voicemail, that's why it says conditional call forwarding is active. If you disable all options you won't get the message but then unanswered calls won't go to voicemail.Hope that helps.
Satish
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Thanks
---------- Post added at 01:41 PM ---------- Previous post was at 01:36 PM ----------
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Just simple take out your sim card and put in some other mobile and cancel all divert and then put it back to ur mobile and check out wat happened ....
s_rajkotia said:
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Click to expand...
Click to collapse
you realise thats almost a year old? Check the dates on threads before you post
ADMIN EDIT: True, but it is a current issue for some people so it's still valid to answer the question.
Doesn't work
My phone drops every call, even with SIM cards from different countries and in all conditions. Thinking this call forwarding might have something to do with it, I tried to deactivate it, first through the settings -- no luck -- than by reformatting the phone. Nothing, cannot get rid of it because it says it is set by the 2 different phone companies I use.
I don't mind the message but when I call someone, I can hear that the call is being sent somewhere, there is a 1st ring, then it rings the other phone. Does this have to do with call forwarding? Can it be interrupting the phone signal and causing the call to drop ?
I have also removed both the Turkcell and Telefonica SIM cards, put them into another unlocked phone and tried to cancel but as soon as I put them back, the message returns and my calls drop.
Im also getting this error when I updated to 4.1.2 and used galaxy s2 sim unlock
Has nothing to do with call forwarding !!!
The Message worked on all AT&T cell phones, since i can remember,. i been using go phones since 06..... and they all had this message when right after the number was just dialed, right after pushing the green phone icon button to dial it , right after entering the number to be dialed on the keypad.
I have found this message on LG Cell Phone 500 CU series... and all my other phones as well...
IT is NOT a CALL FORWARDING ISSUE>.. because i had worked on that for awhile myself...
IT is a Carrier Issue I believe.
and it doesnt happen ever single time , just on certain days . not sure, why... but perhaps, call your carrier and ask them what type of phone they have your phone listed as.
Then tell them the model and make u have. that might change things... Cell phone carriers know how to mess with your phone and break it too...
so if ur having issues with messaging, call forwarding, it just may be the settings the carrier has you listed or down for.
blah.
anyways. yes it is annoying, i just got a new phone, samsung galaxy express. it is starting to happen too on this one. but had it for a few days and it never showed up till about 2 days later.
I thing it is perfectly normal for your device to display this message, I'm central america and mine also says the same thing anytime i make a call "Conditional Call Forwarding Active. However since I have a prepaid or pay as you go plan with my carrier and whenever I have no more credits to make calls i get the message "Calling Barring Enabled". I guess it has something to do with your carriers settings, it doesn't bother me at all though since I'm already used to it so hope that helps.
Enabling call forwarding for real and then disabling it seems to work
I got the same error also on every version of the stock rom (it used to appear occasionally, though) on my Samsung Galaxy S2 (i9100, without g), in that case going into forwarding settings was enough, because the mobile used to read the current configuration from the network and recognized that there was no forwarding active!
I moved to Cyanogen Mod 10.1.3 / Stable and going into forwarding settings was useless... He was updating with the data from the newtwork, all the forwarding options were disabled but the notification message was still there...
I decided to enable it for real by putting a friend number from the same carrier and then disabling it immediately after, and it solved my problem! Hope it helps!
PS: I'm not sure that enabling the call forwarding is free of charge, just double check with your carrier first!
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
anilcsimon said:
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
Click to expand...
Click to collapse
I can't disable the last option (please check the pics)
Sent from my Micromax Canvas 4 A210
Hello,
I also got the similar problem I can't call anyone since 2 days whenever i try to call someone the call drops out and shows the pop up message "Conditional Call Forwarding Active".
I tried to disable call forwarding in call settings but i cant disable the fourth option " Forward Call When Unreachable "
When i try to disable it another pop up message shows up " Unable to deactivate call diverting when phone is Unreachable. Unsupported by operator. "
Please help it is really annoying i can't call anyone.
I use Samsung Galaxy Note 3 Neo

[Q] MIUI voicemail problems

I had a friend root my X10 with the MIUI rom but before hand had not set up my voicemail. I'm needing to set up my voicemail on the phone but I keep getting automated messages asking for "ten digit mailbox number of the person I'm calling or press pound"....when I press pound, it asks for a mailbox number, (which I dont have)....how do I get around this problem?
one thing I have noticed is that there is an extra setting under voicemail settings that says "voicemail service". This is not there on a stock x10.
Any help on this issue at all would be greatly appreciated. thanks.
I finally got it figured out! It ended up being a problem with AT&T and not with the MIUI rom

[Q] Key Not Found Exception?

Hi Everyone
Just a quick question about a little annoyance on my Mozart.
For some reason when i go into the Network settings on my Mozart (Network or Wi-Fi) I get this message "Keynotfoundexception" never had this before only started doing it yesterday.
Anyone know what exactly is wrong?

[Q] MMI problem?

Hi,
I recently updated my sister's S2 (Virgin Mobile) to ICS using Samsung Kies recently and she notices and showed me this odd problem. It is showing a MMI error if she uses a speed dial and it did not do this prior to the update which had Gingerbread initially.
For instance, if she presses 2 on dial pad, then dial, it gives the error. If she holds 2 on the dial pad, it speeds dial normally.
Is there something which needs to be adjusted to remedy this?
Thanks
Try this
Try removing the speed dial then try to re-add them. I had a friend with this problem and this solved it. I would recommend trying it with one first, though, if it doesn't work for you than that's alot of work for nothing!

[Q] Phone keeps losing contact with network (bell)

Hi guys,
I just switched to Bell (Canada) and have a Galaxy S3.
I have noticed in the last day or so that I keep losing the connection with the carrier. I will try to send a text message and it says unable to send right now and the notification screen will not display bell as the carrier. A few seconds later, it will work.
My connection when it is working is quite high signal (max bars)
Does anyone know what could be going on or how I might diagnose it further?
Thanks
I have installed an app called no signal alert and it seems that I keep entering "emergency calls only" mode every few minutes.

Categories

Resources