Can anybody help me to identify which firware is this and where is this from?? I brought it from Dubai but in order to root it, i cant find this firmware in any of the XDA forums.
AP: I9300XXALF5
CP: I9300XXLF5
CSC: I9300EURALE3
You don't need to know what firmware it is to root it. Just follow the stickies in the development section by flashing recovery with odin, then a rooted rom.
Also make sure your phone model number is GT-I9300. If it's not, you don't have the international version.
You can use Chainfire's CF-root, regardless of the firmware version,
http://forum.xda-developers.com/showthread.php?t=1695238
lukyjay said:
You don't need to know what firmware it is to root it. Just follow the stickies in the development section by flashing recovery with odin, then a rooted rom.
Also make sure your phone model number is GT-I9300. If it's not, you don't have the international version.
Click to expand...
Click to collapse
Thanks for the reply. Yes, the model number is GT-i9300. But how can i identify for which country it has been made to?
viveeshk said:
Can anybody help me to identify which firware is this and where is this from?? I brought it from Dubai but in order to root it, i cant find this firmware in any of the XDA forums.
AP: I9300XXALF5
CP: I9300XXLF5
CSC: I9300EURALE3
Click to expand...
Click to collapse
Its from Greece
viveeshk said:
Thanks for the reply. Yes, the model number is GT-i9300. But how can i identify for which country it has been made to?
Click to expand...
Click to collapse
Connect to the Keis, then check your firmware version,
see the code given after the CSC in the bracket is your region,
eg: PDA:LE9 / PHONE:LE8 / CSC:LE9 (XSG)
XSG is the code for UAE,
I think you have purchased the phone from an unautharized dealer, normally the phones (SGS3) shipped in the Middle East are with the above mentioned version as my phone has got.
ZACQ8 said:
Connect to the Keis, then check your firmware version,
see the code given after the CSC in the bracket is your region,
eg: PDA:LE9 / PHONE:LE8 / CSC:LE9 (XSG)
XSG is the code for UAE,
I think you have purchased the phone from an unautharized dealer, normally the phones (SGS3) shipped in the Middle East are with the above mentioned version as my phone has got.
Click to expand...
Click to collapse
Thanks for your help. Yes, the phone is not from an authorized dealer. Kies says the firmware as:
PDA:LF5 /PHONE:LF5/ CSC:LE3 (EUR)
Related
Hi i purchased a secound hand Galaxy S2
which need's repairing, is there anyway i can check if was factory ulocked or was locked to a network.
many thank's
Nigel
nigel1107 said:
Hi i purchased a secound hand Galaxy S2
which need's repairing, is there anyway i can check if was factory ulocked or was locked to a network.
many thank's
Nigel
Click to expand...
Click to collapse
Hi
I also want to know what is my original firmware and modem version, because I forget to take screenshot of original version and after that I flashed it to many custom firmware version, but I have lag problem in HD video recording and sometime problem with middle button so I want to give it to Samsung service centre so I also need to know my original version and how to flash it , if anyone know let me know please,
btw I buy my phone from dialaphone.co.uk and its unlocked contract phone from O2 UK
Thanks
Urvish
onlinejobwork said:
Hi
I also want to know what is my original firmware and modem version, because I forget to take screenshot of original version and after that I flashed it to many custom firmware version, but I have lag problem in HD video recording and sometime problem with middle button so I want to give it to Samsung service centre so I also need to know my original version and how to flash it , if anyone know let me know please,
btw I buy my phone from dialaphone.co.uk and its unlocked contract phone from O2 UK
Thanks
Urvish
Click to expand...
Click to collapse
You can use a XEU Firmware or the O2 UK Firmware, check the Firmware-Thread here in the Forum =>
http://forum.xda-developers.com/showthread.php?t=1075278
I also have the same problem. I have bought my phone in Switzerland and live in France. I bought my phone on my own (it is not included in any contracts). Can I just take XWKJ2 Firmware from this thread:
http://forum.xda-developers.com/showthread.php?t=1075278
and tick PDA, Phone and CSC in Odin to reset my phone and have it working with Kies?
Easiest way is use an app called "checkfus" from the market. It's free.
Basically checkfus can search the same servers as kies does and find the latest firmware available from your carrier.
Then go to intratechs official carrier firmware thread and download the version that checkfus told you was the latest for your carrier.
Flash this via Odin following intratechs instructions.
Use a USB jig to get rid of any flash counter. Sets it to official firmware with 0 flash counter.
If you want at this stage you can do a wipe if you don't want any data on your phone.
At this point your phone will be as if you just unboxed it. kies should work and everything.
Hope this helps.
Sent from my GT-I9100 using XDA App
I have download and installed checkfus and it is very easy to use
Thank You
Hey, I bought my S2 in TELE2, Croatia, I want to restore stock gingerbread... What should I use? I dont have Market on ICS nor mass storage, so help.
kr1pt said:
Hey, I bought my S2 in TELE2, Croatia, I want to restore stock gingerbread... What should I use? I dont have Market on ICS nor mass storage, so help.
Click to expand...
Click to collapse
If it's a I9100 version this is your thread here
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using XDA App
I have the same question for my I9300 / Galaxy S3.
I'd like to thank all the people that posted an answer, but point out there is no answer.
I want to know if there is any way for me to find out what my original firmware was. And is there a way for a service center to check if the firmware matches the imei or serial number?
As long as its official Samsung firmware(and probably for your region) what do they care.
Sent from my GT-I9100 using xda premium
Kies has this option build-in. Just select initialize device from menu or something like that, than enter you phone serial number and model name and voila.
It will tell you what original factory firmware was preinstalled and even flash it if you like.
i9.0.1.3k galaxy imperator
SirKunon said:
Kies has this option build-in. Just select initialize device from menu or something like that, than enter you phone serial number and model name and voila.
It will tell you what original factory firmware was preinstalled and even flash it if you like.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
I tried this, It says " GT i9100 does not support initialising "
I know my phone is from poland. polish was the default language for my fone. Later my phone got bricked, So I had to flash it. Wen i searched it in here http://forum.xda-developers.com/showthread.php?t=1075278 I saw quite a few firmwares from poland. Tried XXLPQ and XXKI4. But the default language came as English UK . I think I flashed it with wrong firmware. I am confused with which CSC should be used. OXA or XEO .
Is there any chance to find the stock firmware with IMEI and S/N
S/N : RDZB913735Z
can you kindly check for me, wats the official firmware for my phone.
Thanks and Regards.
Allrigt I will check this but don't publish your IMEI here. PM me.
Poland have XEO code. But if phone was branded than it can be operator's code (IDE - Orange, TLP - T-mobile...)
i9.0.1.3k galaxy imperator
SirKunon said:
Allrigt I will check this but don't publish your IMEI here. PM me.
Poland have XEO code. But if phone was branded than it can be operator's code (IDE - Orange, TLP - T-mobile...)
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
Thanks man,
Now i am sure its XEO , its unbranded, international version, bought from amazon.com
I'm sorry but Kies can not initialize this phone. This could mean that your phone was not branded and you can flash any official XEO firmware if you want to repair it in Sammys Service Center.
You can flash 4.0.4 immidiatelly with Odin or, if you feel that you absolutly must use Kies to upgrade (don't know why) than flash official 4.0.3 (XXLWP) it is stock for XEO region and after that change your CSC by dialing service code *#272*IMEI# (IMEI - your IMEI number). From pop-up menu choose XEO. Phone will be wiped and new CSC will be set. You can check this in 3e recovery (yellow information text at the bottom) or in Kies - there should be (XEO) at the end of the line with current version information. Than you can upgrade to 4.0.4 via Kies or FOTA.
i9.0.1.3k galaxy imperator
Sorry for bump, is it possible?
BUMP
Hy,
I have a galaxy grand prime G530H and I have accidently deleted the stock rom. Can you tell me plz how can I find the firmware suitable for my cellphone. plz hurry up!
Asfand Yar Khan said:
Hy,
I have a galaxy grand prime G530H and I have accidently deleted the stock rom. Can you tell me plz how can I find the firmware suitable for my cellphone. plz hurry up!
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G530H/
I bought my SII GT-i9100 in China, online, with no carrier. How to identify if it is a i9100i, i9100g or i9100p?
Look under the battery.
silk186 said:
I bought my SII GT-i9100 in China, online, with no carrier. How to identify if it is a i9100i, i9100g or i9100p?
Click to expand...
Click to collapse
Wiki is your friend:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_II_Series#Obtain_System_Information
Go to setting about phone model number
Thanks for the replies. I have looked at the wiki link.
Model Number GT-I9100
Android Version 2.3.6
Product Code Not active
Firmware Versions I9100ZCKJ1
PDA: I9100ZCKJ1
PHONE: I900ZCKJ1
CSC: I900OZHKJ1
I'm very lost about what information I need to know to manual update my phone to ICS as it won't do it through KIES or the phone software update feature.
silk186 said:
Thanks for the replies. I have looked at the wiki link.
Model Number GT-I9100
Android Version 2.3.6
Product Code Not active
Firmware Versions I9100ZCKJ1
PDA: I9100ZCKJ1
PHONE: I900ZCKJ1
CSC: I900OZHKJ1
I'm very lost about what information I need to know to manual update my phone to ICS as it won't do it through KIES or the phone software update feature.
Click to expand...
Click to collapse
First, visit the SamMobile firmware page and look for the stock ICS ROM for your phone. Since it is country specific, make sure you select your own country. Then download the file and flash the TAR file via ODIN.
How can I find out what was my original firmware when I bought the phone. I flashed MG4, the latest one for S3 but KIES claims that my current firmware version is not supported to update via KIES. I saw somewhere that you can restore it with the help of S/N but can't understand how.
http://www.sammobile.com/firmwares/
GT-I9300 and your country. If you had unbranded version then it's unbranded, if not select proper branded one.
There's no other way to determine what you have, especially if you overwrited bootloader with other pure-stock flashed via Odin.
trashkutys said:
How can I find out what was my original firmware when I bought the phone. I flashed MG4, the latest one for S3 but KIES claims that my current firmware version is not supported to update via KIES. I saw somewhere that you can restore it with the help of S/N but can't understand how.
Click to expand...
Click to collapse
you can find it via kies.. for that :
1. switch off your phone, pullup the battery and note the serial no.(no mistake should be made)
1. Open kies and than go to Tools>>Firmware Upgrade and Initialization in kies.( you don't even have to connect your phone to do this)
2. Enter the model no as: GT-I9300 (no mistake should be made, everything should be in capital letters, you can copy this one)
3. It will ask you for S/N (serial no.), enter the one you noted in first step.
Thats it, it will tell you the CSC code(country code) and other informations(i have attached screenshot of mine), the one inside bracket like in my screenshot TTT is the country code. Than you can check in Sammobile for the the firmware and find out the original firmware which was when you bought the phone.
suyash1629 said:
you can find it via kies.. for that :
1. switch off your phone, pullup the battery and note the serial no.(no mistake should be made)
1. Open kies and than go to Tools>>Firmware Upgrade and Initialization in kies.( you don't even have to connect your phone to do this)
2. Enter the model no as: GT-I9300 (no mistake should be made, everything should be in capital letters, you can copy this one)
3. It will ask you for S/N (serial no.), enter the one you noted in first step.
Thats it, it will tell you the CSC code(country code) and other informations(i have attached screenshot of mine), the one inside bracket like in my screenshot TTT is the country code. Than you can check in Sammobile for the the firmware and find out the original firmware which was when you bought the phone.
Click to expand...
Click to collapse
I tried it. But it still gave me MG4 CSC, PHONE and PDA. After flashing it I got LaFleur boot logos and LaFleur wallpapers. That's strange since my phone is not White but Grey.
trashkutys said:
I tried it. But it still gave me MG4 CSC, PHONE and PDA. After flashing it I got LaFleur boot logos and LaFleur wallpapers. That's strange since my phone is not White but Grey.
Click to expand...
Click to collapse
So did you checked for country code in sammobile, what older firmware are listed there?
My country isn't listed there somehow. As I remember when I connected my device via kies the day I bought it the csc was BTU or something that starts with B. Tho PDA was different.
Can't find my country there. Also my phone is Unbranded
Why don't you try flashing the MG4 one from kies, maybe it detects then... and can you tell your CSC code??
Sent from my GT-I9300
suyash1629 said:
Why don't you try flashing the MG4 one from kies, maybe it detects then... and can you tell your CSC code??
Sent from my GT-I9300
Click to expand...
Click to collapse
Gonna try restoring the firmware via Kies with S / N and see what the CSC is.
- Edit -
This is what I get after entering my S / N.
trashkutys said:
Gonna try restoring the firmware via Kies with S / N and see what the CSC is.
- Edit -
This is what I get after entering my S / N.
Click to expand...
Click to collapse
hey firmware for this CSC code is available in sammobile. Search there properly... SEB csc code is for Baltic(country). get the firmware from there and flash it.. and always search properly and only make a new thread..
suyash1629 said:
hey firmware for this CSC code is available in sammobile. Search there properly... SEB csc code is for Baltic(country). get the firmware from there and flash it.. and always search properly and only make a new thread..
Click to expand...
Click to collapse
Check my product code is GT-I9300TADCOA , It's Tele2 from Croatia and I bought the phone from Tele2. So it think that's it.
- EDIT -
No use, still not recognized in Kies. Also the TELE2 firmware from Croatia (GT-I9300RWATWO) is a mismatch to mine GT-I93000TADCOA. And I can't find SEB firmware at Sammobile. Could you link it to me?
trashkutys said:
Check my product code is GT-I9300TADCOA , It's Tele2 from Croatia and I bought the phone from Tele2. So it think that's it.
- EDIT -
No use, still not recognized in Kies. Also the TELE2 firmware from Croatia (GT-I9300RWATWO) is a mismatch to mine GT-I93000TADCOA. And I can't find SEB firmware at Sammobile. Could you link it to me?
Click to expand...
Click to collapse
Firmware information:
Model: GT-I9300
Country: Baltic
Version: Android 4.1.2
Changelist: 1314436
Build date: Tue, 16 Jul 2013 11:32:33 +0000
Product Code: SEB
PDA: I9300XXEMG4
CSC: I9300OXFEMG2
MODEM: I9300XXEMG4
XXEMG4 is the latest firmware available for your Baltic country.
Baltic is your phone's original country. so use that country's firmware
link to the firmware download link:
http://www.hotfile.com/dl/239529663/3580f88/I9300XXEMG4_I9300OXFEMG2_SEB.zip.html
download this zip file, extract it and flash it through odin.. Hope i have helped you..
Sent from my GT-I9300
Hi,
My samsung galaxy s3 is not getting updated to 4.3 or any other higher versions of android platform.
I am currently stuck on 4.1.2
Here are few details if you can help me out on how to update its android version but Officially
Model No: GT-I9300
Android Version: 4.1.2
Baseband Version: I9300XXEMA5
Kernal Version: 3.0.31-1287119
[email protected] - 78 #1
SMP PREEMPT Fri Jun 28 00:40:06 KST
2013
Build Number: JZO54K.I9300XXEMF6
When i dial *#1234# code, these are the following details:
AP: I9300XXEMF6
CP: I9300XXEMA5
CSC: I9300JVEMF1
I have provided every detail i could possibly give, Please help me, all people around who got s3 on the internet are using 4.3 android version, i want to use it too, If my phone does not have any official update yet, when will i get it, how much more i have to wait!!!???
Tried to update your phone with samsung Kies? See this
pvtnelson said:
Tried to update your phone with samsung Kies? See this
Click to expand...
Click to collapse
No it says it is the latest version, please help, no more experts on xda developers...
update through custom firmware
if you want you can update your os through cwm try the achidroid is better than the stock rom
shawnmychal said:
if you want you can update your os through cwm try the achidroid is better than the stock rom
Click to expand...
Click to collapse
I dont want to root my phone, i have searched everywhere on the web, i can't find the version XXEMA5 baseband, what region my phone belongs too
Which country did you get your S3 from? Or which carrier? Some country/carrier might not providing the update yet. Check this list to see whether your S3 suppose to be getting the update or not.
nikctsh said:
Which country did you get your S3 from? Or which carrier? Some country/carrier might not providing the update yet. Check this list to see whether your S3 suppose to be getting the update or not.
Click to expand...
Click to collapse
I bought this phone in Pakistan. I have told everything in detail, please help me, why is my s3 still saying you got the latest firmware installed. XEMf6 build number, XXEMA5 is baseband...
You have the latest firmware for YOUR phone you wait for your provider to update .
That is the official update .
Alternative .
If you want to update then you flash a stock rom for your region from sammobile or samsung-updates or xda stock rom thread .
If your region has not been updated then flash any stock rom and test .
Your baseband shows as Gulf Countries origin see faqs and guides .
STICKYS FAQS and GUIDES
http://forum.xda-developers.com/showthread.php?t=2344125
JJEgan said:
You have the latest firmware for YOUR phone you wait for your provider to update .
That is the official update .
Alternative .
If you want to update then you flash a stock rom for your region from sammobile or samsung-updates or xda stock rom thread .
If your region has not been updated then flash any stock rom and test .
Your baseband shows as Gulf Countries origin see faqs and guides .
STICKYS FAQS and GUIDES
http://forum.xda-developers.com/showthread.php?t=2344125
Click to expand...
Click to collapse
Oh no, Just installed KIES, it says too that firmware is latest installed. It shows me the following details
PDA: MF6 / PHONE: MA5 / CSC: MF1 (AFG)
It means my phone is for Afghnistan region, i am stuck, i think i will never get an update if this phone belongs from there....
If you won't follow the advice given then no, you won't.
Sent from my GT-I9300 using Tapatalk
rameez.ahmed said:
Oh no, Just installed KIES, it says too that firmware is latest installed. It shows me the following details
PDA: MF6 / PHONE: MA5 / CSC: MF1 (AFG)
It means my phone is for Afghnistan region, i am stuck, i think i will never get an update if this phone belongs from there....
Click to expand...
Click to collapse
Please read JJEgan post above you! You can flash and test other stock roms from different regions with odin (you do not need to be rooted to do this) But if you want to do a full backup (nandroid) of your current rom then you need to be rooted, if you just want to save pictures/music just copy them to pc and flash via odin >> http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969 <<
rameez.ahmed said:
Oh no, Just installed KIES, it says too that firmware is latest installed. It shows me the following details
PDA: MF6 / PHONE: MA5 / CSC: MF1 (AFG)
It means my phone is for Afghnistan region, i am stuck, i think i will never get an update if this phone belongs from there....
Click to expand...
Click to collapse
YOU DO NOT NEED TO ROOT TO INSTALL ANY OFFICIAL FIRMWARES JUST ENTER YOUR DEVICE GT-I9300 IN THE SEARCH BOX http://www.sammobile.com/firmwares/
rameez.ahmed said:
I bought this phone in Pakistan. I have told everything in detail, please help me, why is my s3 still saying you got the latest firmware installed. XEMf6 build number, XXEMA5 is baseband...
Click to expand...
Click to collapse
If you can't upgrade through kies, ODIN will be your only choice, and you dont need to root your phone for that.
I got samsung s3 i9300. It was pre rooted. I want to move it to stock firmware. After spending many days trying to flash different firmwares I just failed to bring it back to stock firmware. Perhaps I dont know which firmware file is needed. Plz help me finding that file :crying: . My phone says AP: 19300ZSEMC
CP: 19300ZSEMC
CSC: 19300ZSEMC
Plz help me!!!
Go to sammobile.com and download the latest firmware for your country. Follow the guide in general forum sticky thread on how to flash it with Odin. Factory reset in recovery.
Humxee said:
I got samsung s3 i9300. It was pre rooted. I want to move it to stock firmware. After spending many days trying to flash different firmwares I just failed to bring it back to stock firmware. Perhaps I dont know which firmware file is needed. Plz help me finding that file :crying: . My phone says AP: 19300ZSEMC
CP: 19300ZSEMC
CSC: 19300ZSEMC
Plz help me!!!
Click to expand...
Click to collapse
Mmm,, There is something suspicious about the firmware code you posted it should start 19300I for the international not 19300Z in fact I have never seen that firmware code (maybe I am wrong and somebody else can enlighten me )
Edit: Some of the firmwares don't have the I after 19300 but still not seen that firmware code before
Are you sure it's a genuine S3 international?
Humxee said:
I got samsung s3 i9300. It was pre rooted. I want to move it to stock firmware. After spending many days trying to flash different firmwares I just failed to bring it back to stock firmware. Perhaps I dont know which firmware file is needed. Plz help me finding that file :crying: . My phone says AP: 19300ZSEMC
CP: 19300ZSEMC
CSC: 19300ZSEMC
Plz help me!!!
Click to expand...
Click to collapse
ZS in your coding most likely refers to Taiwan, China or Hong Kong, check Sammobile for these countries see if you can find a version for your phone there where the code starts i9300ZS****
ag4751 said:
ZS in your coding most likely refers to Taiwan, China or Hong Kong, check Sammobile for these countries see if you can find a version for your phone there where the code starts i9300ZS****
Click to expand...
Click to collapse
Yep your right it's Hong Kong >> http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=TGY#firmware << ( Had a look myself because I was curious it looked unusual )
To the op try downloading from Sammobile here >> http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=TGY#firmware <<
Thanks alot
Thanks alot people u guys realy helped :good: alot !!